Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 580
6. Remove the switch pack trim cover.
7. Remove the retaining screw cover plate.
8. Remove the display mounting bracket upper retaining screws.
9. Remove the display mounting bracket lower retaining screws.
10. Disconnect the electrical connectors.
11. Remove the display module and audio unit.
1. Disconnect the electrical connectors and the fibre optic
connector.
2. Remove the display module and audio unit.
12. Remove the navigation system display module.
1. Remove the navigation system display retaining screws.
2. Remove the navigation system display module.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Navigation System - Navigation System Module4-Door
Removal and Installation
Removal
1. NOTE: Make sure the navigation DVD has been removed and the ICE pin
code is available before disconnecting the battery ground cable.
Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2. Remove the luggage compartment front floor carpet.
3. Remove the luggage compartment rear floor carpet.
4. Remove the luggage compartment interior trim.
5. Disconnect the audio unit amplifier electrical connectors.
6. Remove the audio unit amplifier.
7. Detach the module retaining bracket.
8. Disconnect the electrical connectors.
9. Remove the navigation module retaining bolts.
10. Remove the navigation module.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст