Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 450
6. Remove the diesel particulate filter to flexible pipe retaining nuts.
Remove and discard the gasket and nuts.
7. Remove the diesel particulate filter.
Remove and discard the gasket and nuts.
Installation
1. To install, reverse the removal procedure.
Tighten to 46 Nm.
Install a new gasket and nuts.
2. Tighten to 46 Nm.
Install a new gasket and nuts.
Published: 11-May-2011
Exhaust System - Diesel Particulate Filter (DPF) Differential Pressure Sensor
Removal and Installation
Removal
1. Remove the air cleaner outlet pipe.
For additional information, refer to:
Air Cleaner Outlet Pipe
(303-12B
Intake Air Distribution and Filtering - 2.0L Duratorq-TDCi/2.2L
Duratorq-TDCi (110kW /150PS) - Puma, Removal and Installation).
2. NOTE: Note the orientation of the retaining clip.
Detach the diesel particulate filter (DPF) high-pressure and low-pressure
hoses.
3. Detach the wiring harness.
4. Detach the DPF differential pressure sensor retaining bracket.
Remove the retaining nuts.
5. Disconnect the DPF differential pressure sensor electrical connector.
6. NOTE: Note the orientation of the DPF differential pressure
high-pressure and low-pressure hoses and make sure they are installed in
the same position.
Disconnect the DPF differential pressure sensor high-pressure and
low-pressure hoses.
7. Remove the DPF differential pressure sensor.
Remove the retaining nuts.
Installation
1. To install, reverse the removal procedure.
Tighten to 5 Nm.
2. Tighten to 4 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст