Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 421
29. NOTE: Shown with the special tool removed for clarity.
Remove the transaxle retaining bolts.
30. Using the special tool, remove the transaxle.
Detach the transaxle from the clutch plate.
Lower the powertrain assembly jack and transaxle assembly.
Published: 11-May-2011
Manual Transmission/Transaxle - Transaxle2.0L NA V6 - AJV6/2.5L NA V6 -
AJV6/3.0L NA V6 - AJ27
Removal
Special Tool(s)
Slide hammer
100-012
100-012-02
Slide hammer shaft
Halfshaft remover fork
204-226
Powertrain assembly jack
HTJ1200-2
Pinion oil seal remover
308-208
Engine support bracket
303-021
Engine support brackets
303-1068
Removal
All vehicles
1. Remove the battery tray.
For additional information, refer to:
Battery Tray
(414-01 Battery,
Mounting and Cables, Removal and Installation).
2. Remove the air cleaner.
For additional information, refer to:
Air Cleaner
(303-12A Intake Air
Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27, Removal and Installation).
3. Loosen the left-hand shock absorber and spring assembly securing nuts.
4. Loosen the right-hand shock absorber and spring assembly securing
nuts.
5. Remove the front subframe.
For additional information, refer to:
Front Subframe - 2.0L NA V6 -
AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27
(502-00 Uni-Body, Subframe
and Mounting System, Removal and Installation).
6. Remove the fender splash shield access panel.
Vehicles with 2.5L or 3.0L engine
7. Remove the steering gear heat shield bracket.
8. Remove the steering gear heat shield.
9. Remove the transfer case.
For additional information, refer to:
Transfer Case
(308-07 Transfer
Case, Removal).
Vehicles with 2.0L engine
10.
CAUTION: Make sure the halfshaft constant velocity (CV) joints
do not over articulate. Failure to follow this instruction may result in
damage to the CV joints.
Detach the right-hand halfshaft.
Disengage the right-hand halfshaft from the transaxle.
Secure the right-hand halfshaft to one side.
11. NOTE: Plug the transaxle to prevent fluid loss or dirt ingress.
Using the special tool, remove the halfshaft seal.
All vehicles
12. Support the power steering fluid pipe.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст