Chery Tiggo 5 (T21). Service manual — part 310

28–

22

28

12.Remove the coupling bolt (arrow) between steering

column with intermediate shaft assembly and steering
gear input shaft.



(Tightening torque: 60 ± 5 N·m)

13.Remove the steering column with intermediate shaft assembly.

a. Disconnect 2 connectors (arrow) from the electronic

controller.

b. Remove 2 fixing nuts (arrow) from the upper bracket

of steering column assembly, and then remove the
upper part of steering column.



(Tightening torque: 25 ± 3 N·m)

c. Remove 2 fixing bolts (arrow) from the lower bracket

of steering column assembly.



(Tightening torque: 25 ± 3 N·m)

d. Carefully remove the steering column with intermediate shaft assembly from underneath.

RT21280240

RT21280250

RT21280260

10

15

25

25

RT21280270

CAUTION

 DO NOT touch the interior ornament when removing the steering column with intermediate shaft

assembly to avoid scratching the interior ornament.

28–

23

28

Disassembly

1. Remove the coupling bolt (arrow) between electronic

power steering column and intermediate shaft.



(Tightening Torque: 50 N·m)

Inspection

1. Check if electronic controller is normal. Replace the electronic controller if necessary.
2. Check steering column assembly for wear, cracks or deformation, and welding or correction is not allowed.

Replace the steering column assembly if necessary.

3. Check steering column bearing for looseness, wear or sticking. Replace the steering column assembly if

necessary.

Assembly

Assembly is in the reverse order of disassembly.

Installation

Installation is in the reverse order of removal.

RT21280280

CAUTION

 Before installing steering column assembly, slide the spline at lower part of steering column assembly

onto intermediate shaft upper universal joint first.

 Tighten the fixing nuts, bolts and screws in place.
 Install each connector in place.

28–

24

1

29

HYDRAULIC ASSIST STEERING

GENERAL INFORMATION

29-3

Description 29-3
Operation 29-4
Specifications 29-5
Tool 29-5

DIAGNOSIS & TESTING

29-6

Problem Symptoms Table

29-6

Steering Fluid Draining

29-7

Steering Fluid Adding

29-8

Bleeding Procedures

29-9

ON-VEHICLE SERVICE

29-10

Steering Fluid Reservoir Assembly

29-10

Removal 29-10
Inspection 29-10
Installation 29-11

Steering Fluid Pipe

29-12

Removal 29-12
Inspection 29-16
Installation 29-16

Power Steering Pump Assembly

29-17

Removal 29-17
Disassembly 29-18
Inspection 29-18
Assembly 29-18
Installation 29-18

Ball Pin Assembly

29-19

Removal 29-19
Inspection 29-19
Installation 29-20

Steering Tie Rod Assembly

29-21

Removal 29-21
Inspection 29-21
Installation 29-22

Steering Gear Assembly

29-23

Removal 29-23
Inspection 29-25
Installation 29-25

Steering Gear Clearance Adjustment 29-26