Chery QQ3. Service Instruction — part 6

Ventilation and A/C system

72

Center ventilation opening

Air, after being conditioned, is directed
into vehicle by two center ventilation
openings. Setting grids can change
airflow direction

Side ventilation opening

Conditioned air is directed into vehicle by
two side ventilation openings.

Front windshield defroster
ventilation opening

Cold and warm air is directed to Side
window by front windshield defroster
ventilation openings (controlled within
the scope of outer back view mirror)

1、Front windshield defroster ventilation opening2、Side ventilation opening3、Center ventilation opening

Ventilation and A/C system

73

Temperature control
switch

Temperature control switch is used to
control the air temperature of ventilation
opening.
Blue position: Cold
Red position: Hot

Blower motor switch

Blower motor switch is used to control
blower motor speed (four positions in all).
Blower regulates wind speed. Blower
may be turned on to improve comfort
during driving.

Internal and external
circulation control lever

It is used to select exterior fresh air or
interior circulating air.

Outer circulation mode (

)

Allow outer air get into vehicle.
Used for normal ventilation, heating and
cooling.

Internal circulation mode (

)

It is used when a internal circulation is
needed for the air in vehicle. This mode
is used to prevent outside waste gas from
getting into vehicle especially in dusty
environment, it is also applied when fast
cooling or heating of interior air is
requested.

！Notice
Continuous application of internal
circulation mode will cause interior
mugginess and fog on glass, So internal
circulation mode could not be engaged
for a little while.

Ventilation and A/C system

74

Airflow distribution
switch

Airflow distribution switch is used to
select airflow direction. There are five
positions for switch:

Head
Head and foot
Foot
Foot/defrost
Defrost

" head" position(

)

Air flows out from center ventilation
opening and side ventilation opening.

" head and foot" position(

)

Air flows out from center ventilation
opening and front bottom exhaust
opening.

" foot" position (

)

Air mostly flows from front bottom
exhaust opening.

" foot / defrost" position(

)

Air flows out from front bottom exhaust
opening, windshield defrosting
ventilation opening and front windshield
defrosting ventilation opening.

" defrost" position(

)

Air flows out from windshield defrosting
ventilation openings and front windshield
defrosting ventilation openings.

Ventilation and A/C system

75

A/C system

Ventilation, heating and cool ing system
parts compose a control system which
could (in any cold condition ant at any
outdoors temperature) supp ly maximal
comfort .A/C system cooling element
cools down air and removes moisture and
dust such as pollen.
A/C switch
It is used to turn on or off A/C.
After engine is started, turn blower
switch to desirable speed and engage A/
C switch to activate A/C. When A/C is
turned on, indicator light will come on.
A/C could be shut if A/C switch button is
pressed once more. When blower switch
is set in " OFF " (turned off) position,
A/C compressor will not be engaged.

Not ice

When vehicle is riding on a long slope or
in heavy traffic, A/C application will
cause engine overheating. M onitor water
temperature gauge and shut off A/C if
engine is overheated.

Maximum cooling

In torrid weather, vehicle window should
be opened for a little while to let out
indoor hot air quickly if vehicle is
exposed to sunlight for a long time.
A/C switch: On
Internal and outer circulation control

lever:(

)

Airflow distribution switch:(

)

Temperature control switch: turn anti
clockwise fully
(Blue)
Blower motor switch: Full speed

Normal cooling

Cooling for long distance travel and
express travel.
A/C switch: On
Internal and external circulation

switch:(

)

Airflow distribution switch: (

) Or

(

)

Temperature cont rol switch: Blue
Blower motor switch: Random

Ventilation and A/C system

76

Head and foot
It is design for transition stage such as at
outer low temperature with no sunlight.
When temperature control switch is set
between cool (blue) and hot (red), hot air
is directed to lower space of vehicle and
cool air and natural air is directed to
upper room.
A／C switch: On or off
Internal and external circulation control

lever: (

)

Airflow distribution switch:(

)

Temperature cont rol switch: Between
blue (cool) and red (hot)
Blower motor switch: Random

Ventilation

Conditioned air from outside is directed
into vehicle by center ventilation opening
and side ventilation openings.
A/C switch: Off
Internal and external circulation control

lever:(

)

Airflow distribution switch:

(

)or(

)

Temperature control switch: Blue
Blower motor switch: Random

Compulsive heating

A/C switch: Off

Internal and external circulation control

lever:(

)

Airflow distribution switch:(

)

Temperature cont rol switch: Turn
clockwise fully
Blower motor switch: full speed

Notice

Do not apply compulsive heating for a
long term in case air in vehicle will get
foul and fog comes on window. Turn off
internal circulation switch if there is fog
on window or moisture in vehicle.
"compulsive heating " is designed only
for quick warming up ,then return to
"normal heating".

Ventilation and A/C system

77

Normal heating

A/C switch: Off
Internal and outer circulation control

lever:(

)

Airflow distribution

switch:(

)or(

)

Temperature control switch: Red
Blower motor switch: Random

Defrost

A/C switch: Off or on
Internal and outer circulation control

lever:(

)

Airflow distribution switch:(

)

or(

)

Temperature control switch: Red
Blower motor switch: Random

Notice

A/C application may increase defrosting
efficiency. If weather is extremely moist,

do not set A/C in (

)or(

)position

during cooling.,

For temperature

difference between outer air and
windshield may be caused and fog, which
will disturb sight, may form on the inner
surface of windshield.

Clues to the Operation of
Cooling System

If vehicle is in direct sunlight, open
window before A/C is started. Window
should be cleaned in rainy day, while
engaging A/C could lower indoor
temperature, which is effective in both
rainy day and hot weather.
When driving in region with heavy traffic,
cooling system may be cooled
insufficiently for frequent parking and
crawling. If A/C system is off for one or
more than a month, even in winter,
engine must be idled for several minutes
with A/C on at least once each month to
keep compressor lubricated and sealed
properly prolonging system service life.
A/C compressor does not work if blower
switch is turned off.

Ventilation and A/C system

78

Audio system

79

Audio system

Note: If vehicle is equipped with system other than the following audio system , read carefully vehicle audio system instruction instruction.

Audio system

80

Audio system

81

Function of Baoling Audio Panel (optional)

1.Volume key

2.Power on /off key

3.M ode Select Key

4.Band Select Key

5.Clock Key

6.Automatic Storage Key

7.M emory Key

8.Skip Forward Key

9.Skip Backwards Key

10.Cassette Holder

11.Tune Key

12.Eject Key

13.LCD Display

Audio system

82

Introduction to General
Buttons Function

1.Power Supply On／Off Key(POWR)
One press on (2) key turns power on;
once more press on (2) key turns off
power (Note: when power is engaged for
the first time, Radio/Cassette Player will
be in initial Operating M ode due to the
Power On Reset of main control chip).
2.M ode Select Key (M ODE)
If (3) key is pressed repeatedly,
functional mode selection

will be

performed in the following order. VOL
(Volume)-BAS (Bass)-TRE
(Tremble)-BL (R.A.L.)-FA (F.A.R)-VOL
(Volume)
In any mode, pressing on “+” or "-'”key
will regulate corresponding function level.
Volume M ode (VOL)
Pressing on “+ “ or “-“ key will regulate
corresponding volume

level can b e freely

regulated within the range from 0 to 63.
Bass M ode (BAS)-

Pressing on “+” or "-" key may regulate
the content for bass and bass level can be
freely regulated within

the

range

between - 7 and 7.
Tremble M ode (TRE)
Pressing key “+” or “-" key may regulate
the content of

tremble and tremble level

can be freely regulated within the range
between - 7 ~ 7.
Balanced M ode (BA)
Pressing key"+" or "-" key may regulate
R.A.L. sound channel volume and
volume level can be freely regulated
within the range between 15L and 15R.

3. Band Selection Key (BD)
Pressing key (4) repeatedly will cycle
radio bands in the following order:
FM l

→FM2→FM3→FM4→AN→AM2

After band selection is finished, repress
key "

"or"

" to instructionly or

automatically select radio station. After
radio station is selected, press key (3) and
key "+"or"-" to regulate volume level.

4.Clock Key (CLK)
Pressing key (5) could switch over
between the display of radio frequency

and clock: If "CLK" key is pressed when
radio is in work, clock will return to
Frequency Display M ode after clock
display for 5 seconds; Pressing this key
and key " "or"

" simultaneously may

adjust hour and minute.
5. Automatic P reset M emory Key (AS)
If key (6) is pressed for less than 2
seconds, pre-selected stored radio stations
in M emory Keys (1~ 6) will be displayed
in turn; Pressing the key for more than 2
seconds , character " ATP " will appear on
display, meanwhile, radio player enter
into Automatic Scanning M ode and 6
stations will be stored. Then radio will
enter into Cycling Play M ode until any of

keys (

1~ 6

) is pressed to select one

station.

6.M emory Key (1~ 6)
M emory Key (1~ 6) may be used to store
30 stations (18 FM , 12 AM ). If station
needs to be selected instructionly, you may
press the key"

"or "

"to key, then

press anyone of the key (1~ 6), you will
store the selected stations into the
location of program which the key is
pressed for.

Audio system

83

7.tuning Key( " "、"

")

Press the key "

" or "

"

transitorily, stations may be scanned
instructionly step by step ( AM :9KHZ 、
FM :50HZ) until desirable stations are
found. Press the key " " or "

" more

than 1 second; automatic scanning will be
enabled until desirable stations are found.
If the key " " or "

"is pressed during

automatic scanning, audio frequency will
return to previous frequency.

Radio receiving operation

1.Turn on the radio, press power key (2).
When characters app ear on display, radio
is in the state of receiving signal.
2.Press band key (4), select band FM l、
FM 2、FM 3、AM l、AM 2.
3.tuning key (11) press key" " or "

"

to scan stations forward or backward
instructionly. Press key more than 1 second;
you may start automatic scanning until
desirable stations are found.

4.Store stations

instructionly. Select

desirable station, and select M emory Key
(1 ~ 6), then press the key for 2 second,
the selected station will be stored in the
key, six keys may memorize any
stations of FM l, FM2, FM 3, AMI and
AM 2.
5.Sound effect regulation. Press key "
MODE " to display character " VOL " on
screen, pressing the key " + " or " - "
within 5 seconds may change volume. If
the key" + " or " - “ is pressed in 5
seconds, display will return to main
display state. The control mode of
BASTRE 、 BL 、 FA are the same as
volume .
6.Automatic scanning storage (6). Press
key for 2 second and a signal will be
received for confirming memory function
and display scanning. Six stations with
strong signal will be stored. Press key or
anyone of the keys 1 ~ 6 transitorily, the
function will be ceased, if you cannot
find desirable six stations, these stations

will disappear.
7.Stereo. When stereo station is received,
ST9 (indicating stereo) will be displayed
automatically.
8.Scan memory stations. Press preset key
1~ 6,you will find stored stations.
Play

Play Operation

1.The procedure for start-up is the same
as receiving.

2.Insert the tape with its opening facing
right, and push it into cassette holder,

when the marks (TAPE and “

” or

“

”) indicating play and direction

display on screen, radio is in normal play
state.

3.Volume regulation is the same as radio.
4

.

Selecting songs. Press Fast Forward

Key (8) or Fast Backward key (9) you
may select desirable program quickly.
5.Reverse Playing Direction.
Pressing Fast Forward Key and Fast
Backward on the same time may have

Audio system

84

tape play reversely.
6.Switch between receiving and p laying
1. Push tape into cassette holder and
receiving mode will change to playing
mode.
2. Press Eject Key (12) and tape will be
ejected; playing mod e will be switched
over to receiving mode. Press Fast
Forward or Fast Backward Key ( after
fast forward、Fast Backward is finished,
radio will return to playing mode from
receiving mode).

！notice:

In any case, no broken wire is allowed to
be bare without insulation. A proper
adapter may be used to connect circuit if
necessary, or circuit overload, short
circuit, even fire, may be caused.
furthermore, main parts may also be
damaged. According to customers'
different requirements, audio system
configurations are not same. Our
corporation provides common/electronic
tuning radio; Single disk/multi-disk CD
player; Antennas with or without
amplifier etc; therefore, it is suggested to
install or refit aud io system by CHERY
AUTO authorized service station. If other
type of radio and CD player is adopted, it

must

meet

typ e and

technology

requirements which is specified in
CHERY AUTO accessory catalogue and
ensure its correct installation. According
to CHRRY AUTO accessory catalogue
and vehicle type, customer may also
adopt other type of speaker、connector、
antennae and anti-interference unit. If the
accessory out of

CHERY AUTO

specifications is app lied, there will be a
failure in system. During antenna
installation and replacement, antennae

socket must be well

sealed.

Audio system

85

VDO Audio Panel Function (optional)

Audio system

86

1.Preset key1

RANDOM :CD Random Play Start／Stop

2.Preset key2

3.Preset key3
REPEAT: CD Repeat Play Start/Stop

4.SOURCE: Sound source

5.SOUND Short press: sound effect mode

SELECT: Lon g press: sound set mode

6.MUTE: M ute

7.Volume

8.Power switch

9.Display

10.BAND: Band

SCAN: Radio frequency scan／CD play

track scan

High track, low track search (play)

Forward/backward track (CD box)

M usic search system

11.AST: Automatic storage

12.Preset key6

DISC-: Forward disk selection

13.Preset key5

14.Preset key4

DISC+: Backward disk selection

15.

Fast Forward

16.

Fast Backward

17.

Tape eject Short press: Reverse

tape

Long press: Tape eject

18.Tape

Audio system

87

Audio

On/off


Press POWER key to switch on or

off volume



Volume may be regulated by

rotating the knob.

Warning: It is should be ensured that

traffic signal (whistle, siren) could be

heard.

M ute


Press M UTE key to activate or

disable mute state. Audio effect



Whether or not jazz music, popular

music , verbal program , classical or

rock music is preferred,

SOUND(audio effect) key will

meet your requirement.



A short press on SOUND key

selects a manuf actory preset audio

effect:

-BASS-TREB: Tremble and bass effect

may be set by yourself

-JAZZ: Jazz music

-VOCAL: verbal program

-POP: Popular music

-CLASSIC: Classical music

-ROCK: Rock music Audio setting
·Press SOUND key for more than 2
seconds and enter into audio setting mode
·Press SOUND key or SELECT key to

select desirable audio effect mode.

-BASS (Bass, In BASS-TREB mode)

-TREBLE (Tremble, In BA SS-TREB

mode)

-BALANCE:

R.A.L. volume

Balance-FADER (Front and rear horn

control)

-L0uDNEss(OFF, LOW, M ID, HIGH, in

BASS～TREB mode)
·Selected sound effect mode may be
regulated by rotating volume

knob .Display will return to previous

Operating M ode after 5 seconds.

Sound source

Press SOURCE key to select desirable

sound source:

-Radio

-Tape-Disk (If connected)

Radio

Band

Press BAND key to select desirable band

FM l

FM2

FM3

FM AST

FM A

z

M W(AM )l

M W(AM)2

M W

Notice:

If M W(AM ) or LW band is not preferred,

it could be canceled. If there are more

preset stations than you preferred,

corresponding cancel operation may be

performed.

Automatic C hannel Search

Search for radio station by search tuning

automatically.