Peugeot 307 (2007.5). Instruction — part 6
VISIBILITY
Front and rear lights (ring A)
Place ring A in the required
position.
Dipped/Main beam change
Pull the stalk towards you.
Vehicles i tted with front fog lamps
and a rear fog lamp (ring C)
Lights off
Side lights
Dipped/main beam
headlamps
Rear fog lamp
Front fog lamps ( i rst rotation
of the ring forwards)
Front and rear fog
lamps (2
nd
rotation of
the ring forwards).
Note: to switch off
the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
Vehicles i tted with a rear fog
lamp (ring B)
This operates with the dipped/main
beam headlamps.
Note: when the lights are switched off
automatically, the rear fog lamp and
the dipped headlamps will remain on.
Turn the ring backwards to switch
off the rear fog lamp. The dipped
headlamps will then be switched off.
The front fog lamps operate with
the side lights and the dipped
headlamps.
Front fog lamps and rear fog
lamp
Turn ring B or
C forwards to switch
on and backwards to switch off.
The status is coni rmed by the
indicator light on the instrument
panel .
Lights on buzzer
With the ignition off and the automatic
switching on of the lights deactivated,
when the driver’s door is opened, a
buzzer sounds to warn you that you
have left your lights on.
The rear fog lamp will be
deactivated
automatically
when towing or when a
bicycle carrier i tted with a
fog lamp is i tted.
LIGHTS STALK
In good or rainy weather,
both day and night, the front
fog lamps and the rear fog
lamp are dazzling and are
prohibited.
Do not forget to switch them off when
they are no longer needed.
Automatic switching
on of the lights
VISIBILITY
74
Automatic switching on of the
lights
Side
lights
and
dipped
beam
headlamps switch on automatically if
the light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen
wipers stop.
Note: in foggy weather or in snow,
the brightness sensor can detect
sufi cient light. As a consequence, the
lights will not come on automatically.
Deactivation
Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.
If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
Manual "Follow-me-home"
lighting
When the automatic switching on
of the lights function is deactivated ,
the side lights and dipped headlamps
remain on for the duration selected
for the automatic "follow-me-home"
lighting.
If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (l ashers)
Left: downwards.
Right: upwards.
Note: if you forget to cancel the
direction indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the selected
duration.
Activation:
switch off the engine,
"l ash" the headlamps,
get out of the vehicle and lock it.
Deactivation:
"l ash" the headlamps again,
get out of the vehicle and lock it.
To deactivate or activate this
function, go to the multifunction
display coni guration menu.
The duration of the timed
period must also be set (15,
30, 60 seconds), via the multifunction
display coni guration menu, except in
the case of the monochrome screen
A for which it is pre-set.
Cancelling:
"l ash" the headlamps,
get out of the vehicle and lock it.
Activation
Turn ring A to the "AUTO"
position. The automatic lighting
is accompanied by a message on
the multifunction display.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.
VISIBILITY
74
Automatic switching on of the
lights
Side
lights
and
dipped
beam
headlamps switch on automatically if
the light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen
wipers stop.
Note: in foggy weather or in snow,
the brightness sensor can detect
sufi cient light. As a consequence, the
lights will not come on automatically.
Deactivation
Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.
If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
Manual "Follow-me-home"
lighting
When the automatic switching on
of the lights function is deactivated ,
the side lights and dipped headlamps
remain on for the duration selected
for the automatic "follow-me-home"
lighting.
If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (l ashers)
Left: downwards.
Right: upwards.
Note: if you forget to cancel the
direction indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the selected
duration.
Activation:
switch off the engine,
"l ash" the headlamps,
get out of the vehicle and lock it.
Deactivation:
"l ash" the headlamps again,
get out of the vehicle and lock it.
To deactivate or activate this
function, go to the multifunction
display coni guration menu.
The duration of the timed
period must also be set (15,
30, 60 seconds), via the multifunction
display coni guration menu, except in
the case of the monochrome screen
A for which it is pre-set.
Cancelling:
"l ash" the headlamps,
get out of the vehicle and lock it.
Activation
Turn ring A to the "AUTO"
position. The automatic lighting
is accompanied by a message on
the multifunction display.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.
VISIBILITY
75
For vehicles i tted with halogen
bulbs, depending on the load in your
vehicle, adjusting the beam of your
headlamps is recommended.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
2.
5 people + maximum authorised
loads.
3.
Driver + maximum authorised loads.
Initial setting is position 0.
On vehicles with xenon bulbs:
when stationary , the system automatically
corrects the height of the beam, whatever
the load of the vehicle. The driver is then
assured of having optimum lighting and
not causing a nuisance to other road
users.
In cases of malfunction ,
the service warning light
comes on on the instrument
panel,
accompanied
by
an audible signal and a
message on the multifunction display.
The system places your headlamps
to the low position.
Do not touch the xenon bulbs.
Contact a PEUGEOT dealer.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
This warning light comes
on on the instrument panel.
MANUAL ADJUSTMENT OF
THE HEADLAMPS
AUTOMATIC HEADLAMP
ADJUSTMENT
* According to country.
VISIBILITY
76
Special position of the front
windscreen wiper
In the minute following switching off
of the ignition, any action on the stalk
positions the wipers in the centre of
the windscreen.
This action enables you to position
the wiper blades for winter parking,
cleaning or replacement (See section
"Practical information - Changing a
wiper blade").
To park the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you. The windscreen wash
then the windscreen wipers operate
for a i xed period.
The headlamp wash is also activated,
if the headlamps are on.
WINDSCREEN WIPER STALK
2
Fast wipe (heavy rain).
1
Normal wipe (moderate rain).
I
Intermittent wipe.
0
Off.
AUTO Automatic or single wipe
(press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is
in proportion to the intensity of the
rainfall. The i rst press of the stalk
downwards activates the automatic
wipe.
Subsequent presses trigger a single
wipe.
Front windscreen wiper with
intermittent wipe
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I
Intermittent wipe.
0 Off.
Single wipe (press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the vehicle
speed.
Front windscreen wiper with
automatic wipe
VISIBILITY
77
Automatic windscreen wipers
In AUTO mode, the windscreen
wipers operate automatically and
adapt their speed to the intensity
of the rainfall .
Do not cover the rain sensor
located on the windscreen
behind the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Rear windscreen wiper
To activate or deactivate
this function, go to the multi-
function display coni guration
menu.
If there is a signii cant
accumulation of snow or ice and
when using a bicycle carrier on the
tailgate
(estate),
deactivate
the
automatic rear wiper by going to the
multifunction display coni guration
menu.
Rear windscreen wash
Deactivation
Deactivation
of
the
function
is
accompanied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .
In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in
intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Turn ring A
past the i rst
notch; the windscreen wash
then the windscreen wiper
operate for a i xed period.
Turn ring A
to the i rst notch
for intermittent wiping.
When
reverse
gear
is
engaged, if the windscreen
wipers are in operation, the
rear wiper starts.
The automatic windscreen
wipers function must be
reactivated if the ignition
has been switched off for
more than one minute, by pressing
the stalk downwards.
VISIBILITY
77
Automatic windscreen wipers
In AUTO mode, the windscreen
wipers operate automatically and
adapt their speed to the intensity
of the rainfall .
Do not cover the rain sensor
located on the windscreen
behind the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Rear windscreen wiper
To activate or deactivate
this function, go to the multi-
function display coni guration
menu.
If there is a signii cant
accumulation of snow or ice and
when using a bicycle carrier on the
tailgate
(estate),
deactivate
the
automatic rear wiper by going to the
multifunction display coni guration
menu.
Rear windscreen wash
Deactivation
Deactivation
of
the
function
is
accompanied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .
In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in
intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Turn ring A
past the i rst
notch; the windscreen wash
then the windscreen wiper
operate for a i xed period.
Turn ring A
to the i rst notch
for intermittent wiping.
When
reverse
gear
is
engaged, if the windscreen
wipers are in operation, the
rear wiper starts.
The automatic windscreen
wipers function must be
reactivated if the ignition
has been switched off for
more than one minute, by pressing
the stalk downwards.
VISIBILITY
78
1. Front courtesy light
2. Map reading lights
Permanently off.
Permanently on.
It switches off gradually:
-
when the vehicle is locked,
-
when the ignition is switched on,
-
with the ignition off, 30 seconds
after the last door is closed.
In this position, the courtesy
light comes on automatically:
-
when the vehicle is unlocked,
-
when the key is removed from the
ignition,
-
when a door is opened,
-
when the vehicle location function
is used.
Different lighting times are available:
-
with the ignition off or on,
approximately 10 minutes,
- in economy mode, approximately
30 seconds,
-
when the engine is running, no limit.
With the ignition on, press
the corresponding switch.
COURTESY LIGHTS
VISIBILITY
79
3. Rear courtesy light
Note: on the saloon, the front
courtesy light (in the "permanently
on" position) forces the switching on
of the rear courtesy light if the switch
is in the central position.
To switch off the rear courtesy light,
place the switch in the "permanently
off" position.
In this position, the courtesy
light comes on automatically:
-
when the vehicle is unlocked,
-
when the key is removed from the
ignition,
-
when a door is opened,
-
when the vehicle location function
is used.
Permanently off.
Permanently on when the
ignition is on (function not
available in economy mode).
It switches off gradually:
-
when the vehicle is locked,
-
when the ignition is switched on,
-
with the ignition off, 30 seconds
after the last door is closed.
4. Rear reading lights (estate)
The reading light comes on:
-
when the vehicle is unlocked,
-
when the key is removed from the
ignition,
-
when a door is opened,
-
when the vehicle location function
is used.
It switches off gradually:
-
when the vehicle is locked,
-
when the ignition is switched on,
-
with the ignition off, 30 seconds
after the last door is closed.
With the ignition on (function not
available in economy mode), press
the switch to obtain permanent
lighting.
Press the switch again to switch the
reading light off.
LAYOUT
80
With the ignition on, the mirror is
automatically lit up when the l ap is
opened.
The front courtesy light and a spec-
tacles holder are i tted in the roof
console.
To open or close the spectacles hold-
er, press the recess in the cover.
The athermic windscreen has two
non-rel ective zones located either
side of the base of the interior mirror.
They are intended for afi xing toll
cards and/or car park tickets.
SUN VISOR WITH ILLUMINATED
COURTESY MIRROR
THE ROOF CONSOLE
AREAS FOR TOLL CARDS/
CAR PARK TICKETS
LAYOUT
81
INTERIOR LAYOUT
2. Front ashtray
Pull the lid to open the ashtray.
To empty it after opening, press the
tab and remove the ashtray.
3. Storage
4. 12 volt socket (100 W max)
This is a lighter type socket, i tted
with a cap. It is supplied with current
from the running position.
5. Door tray
6. Storage/Can holder
7. Coin storage
8. Waste container
To empty this, open it fully (past the
point of resistance) then pull on the
receptacle to remove it.
To rei t, lock it in place on the cover.
It contains three sockets * B for con-
necting video equipment.
The layout allows storage of a water
bottle, a pen, the vehicle handbook,
a pair of spectacles, tokens, etc.
1. Glove box with cooling facility
This is i tted with a lock.
To open the glove box, lift the handle.
The glove box lights when the lid is
opened.
It has a ventilation nozzle that can
be closed A , distributing the same
cooled air as the vents of the pas-
senger compartment.
* With colour display only.
LAYOUT
82
When i tting the mat for the i rst time,
use only the i xings supplied in the
wallet attached.
When removing the mat on the driver’s
side:
-
push the seat as far back as pos-
sible,
- unscrew the i xings fully,
- remove the i xings, then the mat.
FITTING/REMOVING THE MAT
When rei tting, position the
mat correctly and replace the
i xings by pressing them in.
Ensure that the mat is se-
cured correctly.
To avoid any risk of jamming of the
pedals:
-
ensure that the mat is positioned
correctly.
- never i t one mat on top of another.
Lower the armrest to access the
storage shelf on the seat back.
Lift the lid. It contains a storage
tray as well as two can holders
and two pen holders.
REAR ARMREST
(SALOON AND ESTATE)
LAYOUT
83
For further details, refer to the
operating manuals "Video kit
operation" and "VMA8582
7 inch LCD colour monitor".
ENTERTAINMENT SCREEN KIT
This video assembly will enable the
rear passengers to pass the time
pleasantly while watching their fa-
vourite i lm or playing their favourite
game, by means, in particular, of the
connection of a DVD player or games
console to the central support, i tted
between the front seats.
The entertainment screen kit con-
sists of:
-
a 16/9 ths , 7 inch, LCD colour
monitor with direction adjustment
in the three axes,
-
two high frequency, wireless, ste-
reo headphones,
-
a removable support,
-
three audio/video sockets on the
i xed base and in the glove com-
partment.
The monitor and the support can be
removed and stored, each in their
own protective cover.
The entertainment screen kit accepts
all types of audio/video source, PAL/
NTSC compatible, such as: DVD
player, camcorder, games console, ...
These sources are connected to the
three audio/video sockets, AV1 in the
glove compartment or AV2 on the
i xed base.
LAYOUT
84
LAYOUT
85
1. Rear parcel shelf
To remove the shelf:
-
unhook the two strings,
-
slightly raise the shelf, then
remove it.
The shelf can be stored:
-
either behind the front seats,
-
or behind the rear seat.
2. Hooks
3. Stowing rings
4. Luggage retaining net
Hooked onto the stowing rings, this
enables your luggage to be secured.
5. Open storage trays
6. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the left-hand side of the parcel
shelf.
It is supplied from the "Running"
position.
BOOT LAYOUT (SALOON)
LAYOUT
86
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст