Peugeot 307 (2007.5). Instruction — part 3

MULTIFUNCTION DISPLAYS

Presentation

This displays the following information:
-

the time,

the date,

the outside temperature * (this

l ashes if there is a risk of ice),

- the status of the accesses (doors,

boot, ...),

the warning messages (e.g.: "Emis-

sion control system faulty") or infor-

mation messages (e.g.: "Auto lights

on"), displayed temporarily, can

be cleared by pressing the "ESC"

button,

- the trip computer (see corre-

sponding section).

* With air conditioning only.

Parameter configuration

There are three display control buttons:
-

"ESC" to abandon the operation
in progress,

"MENU"

to scroll through the

menus or sub-menus,

"OK"

to select the menu or sub-

menu required.

General menu

Press the "MENU"

button to scroll

through the various menus of the
general menu:
- vehicle coni guration,
-

options,

display settings,

languages,

units.

Press the "OK"

button to select the

menu required.

(RD4 AUDIO EQUIPMENT)

MULTIFUNCTION DISPLAYS

Vehicle coni guration

Once the "Vehicle coni guration"

menu has been selected, you can

activate or deactivate the following

equipment:
- wiper linked with reverse gear

(refer to the "Visibility" section),

"follow-me-home" lighting (refer

to the "Visibility" section),

- parking assistance (refer to the

"Driving" section).

Options
Once the "Options" menu has been

selected, you can start diagnostics of

the status of the equipment (active,

not active, faulty).

Languages
Once the "Languages" menu has been

selected, you can change the language

used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-

Brasil, Deutsch, English, Espanol).

Display settings
Once the "Display settings" menu

has been selected, you can gain ac-

cess to the following settings:
-

year,

month,

day,

hour,

minutes,

12 or 24 hour mode.

Units
Once the "Units" menu has been se-

lected, you can change the units of

the following parameters:
- temperature (°C or °F),
-

fuel consumption (l/100, mpg or km/l).

Once you have selected a setting,

press the "OK"

button to change its

value.

Wait for approximately ten sec-

onds without any action to allow the

changed data to be recorded or press

the "ESC"

button to cancel.

The display then returns to the nor-
mal display.

For safety reasons, coni gu-

ration of the multifunction

displays by the driver must

take place when stationary.

MULTIFUNCTION DISPLAYS

With air conditioning only.

General menu

Press the "MENU"

button to gain ac-

cess to the general menu, then press

the "  " or "  "

buttons to scroll

through the following items:
-

radio-CD,

- vehicle coni guration,
-

options,

display settings,

languages,

units.

Press the "OK"

button to select the

menu required.

Presentation

This displays the following informa-
tion, via the RD4 audio equipment

control keypad:
-

the time,

the date,

the outside temperature * (this

l ashes if there is a risk of ice),

- the audio source displays (radio,

CD, ...),

- the status of the accesses (doors,

boot, ...),

the warning messages (e.g.:

"Emission control system faulty")

or information messages (e.g.:

"Auto lights on"), displayed tem-

porarily, can be cleared by press-

ing the "ESC" button,

- the trip computer (see corre-

sponding section).

Radio-CD
With the RD4 audio equipment

switched on, once the "Radio-CD"

menu has been selected, you can

activate or deactivate the functions

linked with the use of the radio (RDS

following, REG mode), the CD or the

CD changer (introscan, random play,

CD repeat).

For further details concerning the

"Radio-CD" application, refer to the

RD4 part of the "Audio and Telemat-

ics" section.

Vehicle coni guration

Once the "Vehicle coni guration"

menu has been selected, you can

activate or deactivate the following

equipment:
- rear wiper linked with reverse gear

(refer to the "Visibility" section),

"follow-me-home" lighting (refer

to the "Visibility" section),

- parking assistance (refer to the

"Driving" section).

Options
Once the "Options" menu has been

selected, you can start diagnostics of

the status of the equipment (active,

not active, faulty).

MONOCHROME DISPLAY A

MULTIFUNCTION DISPLAYS

Display settings
Once the "Display settings" menu

has been selected, you can gain ac-

cess to the following settings:
-

year,

month,

day,

hour,

minutes,

12 or 24 hour mode.

Languages

Once the "Languages" menu has

been selected, you can change

the language used by the display
(Français, Italiano, Nederlands, Por-

tugues, Portugues-Brasil, Deutsch,

English, Espanol).

Units
Once the "Units" menu has been se-

lected, you can change the units of

the following parameters:
- temperature (°C or °F),
-

fuel consumption (l/100, mpg or km/l).

Once you have selected a setting,

press the "  " or "  " buttons to

change its value.

Press the "" or "" buttons to
move to the previous or next setting

respectively.
Press the "OK"

button to record the

change and return to the normal dis-

play or press the "ESC" button to

cancel.

For safety reasons, coni gu-

ration of the multifunction

displays by the driver must

take place when stationary.

MULTIFUNCTION DISPLAYS

MONOCHROME DISPLAY C
(WITHOUT RD4 AUDIO EQUIPMENT)

Parameter configuration

There are three buttons and a navi-

gator to enable you to control the

screen:
-

"MENU" to display the general
menu ,

"MODE"

to change the perma-

nent application (trip computer,

date, ...),

"ESC" to abandon the operation
in progress,

Rotation of the navigator: move-

ment on the display or changing

of a setting,

Press on the navigator:

coni r-

mation of the selection.

Presentation

It displays the following information:
-

the time,

the date,

the exterior temperature (this

l ashes if there is a risk of ice),

- the accesses check (doors,

boot, ...),

the warning messages (e.g.: "Depol-

lution system faulty") or information

messages (e.g.: "Automatic head-

lamp lighting activated"), displayed

temporarily, can be cleared by press-

ing the "ESC" button,

- the trip computer (see corre-

sponding section),

General menu

Press the "MENU"

button to access

the general menu:
- trip computer (see corresponding

section),

- personalisation-coni guration.

Turn the navigator to select the menu

required, then coni rm by pressing

the navigator.

"Personalisation-
Configuration" menu

Once this menu has been selected, you

can access the following functions:

- dei ne the vehicle parameters,

- display coni guration,

- selection of the language.

MULTIFUNCTION DISPLAYS

Dei ne the vehicle parameters

Once this menu has been selected,

you can activate or deactivate the fol-

lowing equipment:
- wiper linked with reverse gear

(refer to the "Visibility" section),

"follow-me-home" lighting and

duration (refer to the "Visibility"

section),

- parking assistance (refer to the

"Driving" section).

Selection of the language
Once this menu has been selected,

you can change the language

used on the display (Deutsch,

English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-

Brasil).

Display coni guration

Once this menu has been selected,

you can access the following settings:
-

brightness-video setting,

date and time setting,

- selection of the units.

Once you have selected a setting,

press the navigator.
Turn the navigator to change its value.

Press the navigator to record the

change and move on to the next set-

ting or press the "ESC" button to

cancel.

Example : "Duration of the "follow-
me-home" lighting"

For safety reasons, coni gu-

ration of the multifunction

displays by the driver must

take place when stationary.

MULTIFUNCTION DISPLAYS

* With air conditioning only.

Controls

From the RD4 audio equipment con-

trol panel, you can:


press the "MENU" button to gain

access to the general menu ,



press the "" or "" buttons to

scroll through the items on the

screen,



press the "MODE" button to

change the permanent application

(trip computer, audio source, ...),



press the "

" or "" buttons to

change a setting value,



press the "OK"

button to con-

i rm,

or


press the "ESC" button to aban-

don the operation in progress.

Displays on the screen

This displays the following information:
-

the time,

the date,

the outside temperature * (this

l ashes if there is a risk of ice),

- the status of the accesses (doors,

boot, ...),

- the audio sources (radio, CD, ...),

- the trip computer (refer to the cor-

responding section).

Warning messages (e.g.: "Emission

control system faulty") or information

messages (e.g.: "Automatic switching

on of the headlamps activated") may

appear temporarily. These can be

cleared by pressing the "ESC" button.

General menu



Press the "MENU" button to gain

access to the general menu :

- audio functions,
- trip computer (refer to the cor-

responding section),

- personalisation-coni guration,
- telephone (hands-free kit).

 Press the "" or "" buttons to

select the menu required, then

coni rm by pressing the "OK"

button.

MONOCHROME SCREEN C

"Audio functions" menu

With the RD4 audio equipment

switched on, once this menu has

been selected you can activate or de-

activate the functions linked with use

of the radio (RDS, REG, RadioText),

the CD or the CD changer (introscan,

shufl e, CD repeat).

For further details concerning the

"Audio functions" application, refer

to the RD4 part of the "Audio and

Telematics" section.

"Trip computer" menu

Once this menu has been selected,

you can consult information concern-

ing the status of the vehicle (warnings

log, status of the functions, ...).

MULTIFUNCTION DISPLAYS

"Personalisation-
Configuration" menu

Once this menu has been selected,

you can gain access to the following

functions:

- dei ne the vehicle parameters,

- display coni guration,

- selection of the language.

Display configuration

Once this menu has been selected,

you can gain access to the following

settings:
-

brightness-video setting,

date and time setting,

- selection of the units.

Example: setting of the duration of

the "follow-me-home" lighting



Press the "" or "" buttons,

then the "OK" button to select the

menu required.



Press the "" or "" buttons,

then the "OK"

button to select

the "Lighting and signalling" line.



Press the "" or "" buttons

to set the value required (15, 30

or 60 seconds), then press the

"OK"

button to coni rm.

For safety reasons, it is im-

perative that coni guration of

the multifunction displays by

the driver takes place when

stationary.

Define the vehicle parameters

Once this menu has been selected,

you can activate or deactivate the fol-

lowing equipment:
- wiper linked with reverse gear

(refer to the "Visibility" section),

"follow-me-home" lighting (refer

to the "Visibility" section),

- parking assistance (refer to the

"Driving" section).



Press the "" or "" buttons,

then the "OK"

button to select the

"OK"

box and coni rm or press

the "ESC"

button to cancel.

Selection of the language

Once this menu has been selected,

you can change the language used

by the display (Deutsch, English,

Espanol, Français, Italiano, Nederlands,

Portugues, Portugues-Brasil).

"Telephone" menu

With the RD4 audio equipment

switched on, once this menu has been

selected you can coni gure your Blue-

tooth hands-free kit (matching), con-

sult the various telephone directories

(calls log, services, ...) and manage

your communications (pick up, hang

up, call waiting, secret mode, ...).

For further details concerning the

"Telephone" application, refer to the

RD4 part of the "Audio and Telemat-

ics" section.

MULTIFUNCTION DISPLAYS

COLOUR DISPLAY

Displays on the screen

When the ignition is switched on, this

displays the following information au-

tomatically and directly:
-

the time,

the date,

the outside temperature (if there

is a risk of ice, you are warned by

a message).

Warning messages (e.g.: "Fuel level

low") and vehicle function status mes-

sages (e.g.: "Automatic switching on of

the headlamps activated") may appear

temporarily. These can be cleared by

pressing the "ESC" button.

General menu

When the RT4 GPS audio/telephone

is switched on, select the menu

which corresponds to the following

applications:
-

the satellite navigation system,

- the guidance on the map,

- the trafi c information,

- the audio sources (radio, CD,

Jukebox, ...),

- the telephone directories and

functions,

- the coni guration of the screen

and the setting of the parameters

of the vehicle’s equipment,

the displaying of a video,

- the vehicle diagnostics (warnings

log and status of the functions).

Controls

From the RT4 GPS audio/telephone

control panel, to select one of the ap-

plications:


press the "MENU" button to gain

access to the general menu ,



turn the dial to move the

selection,



press the dial to coni rm the

selection,

or


press the "ESC" button to abandon

the operation in progress and
return to the previous display.

For further details concerning these

applications, refer to the RT4 part of

the "Audio and Telematics" section.

MULTIFUNCTION DISPLAYS

Selection of the language
Once the "Selection of the language"

menu has been selected, you gain

access to the following parameters:

- selection of the display, informa-

tion and voice commands lan-

guage (Français, English, Italiano,

Portugues, Espanol, Deutsch,

Nederlands).

Display coni guration

Once the "Display coni guration"

menu has been selected, you gain

access to the following parameters:

- selection of the palette of colours

available for the display,

setting of the brightness and

brilliance of the display,

setting of the date and time (12 or
24 hour mode, adjustment of the

minutes on GPS),

selection of the units (temperature

°Celsius

°Fahrenheit;

consumption in l/100 km or mpg

or km/l).

Sounds
Once the "Sounds" menu has been

selected, you gain access to the fol-

lowing parameters:
- setting of the voice commands,

- setting of the voice synthesiser

(volume of the instructions

and other messages, male or

female),

- activation of the auxiliary input AUX.

Dei ne the vehicle parameters

Once the "Dei ne the vehicle para-

meters" menu has been selected,

you can activate or deactivate certain

driving and comfort equipment:

- parking assistance (refer to the

"Driving" section),

- wiper linked with reverse gear

(refer to the "Visibility" section),

"follow-me-home" lighting and

duration (refer to the "Visibility"

section).

"Configuration" menu



Press the "MENU" button on the

RT4 GPS audio/telephone to gain

access to the general menu .



Turn the dial to select the

"Coni guration" menu, then

press it to coni rm.

Once this menu has been selected,

you can gain access to the following

functions:

MULTIFUNCTION DISPLAYS

"Video" menu

You can connect video equipment

(camcorder, digital camera, DVD

player, ...) to the three audio/video

sockets, located in the glove box.
Videos can only be displayed
when stationary.
Once this menu has been selected,

you can select:

- "Activate video mode" to activate/

deactivate the video,

- "Video parameters" to set the

display format, the brightness,

the contrast and the colours.

 Press the "MODE" or "DARK"

button to disconnect the displaying

of the video.

 Press the "SOURCE" button

several times in succession to

select an audio source other than

that of the video.



Select the line "Duration of the

"follow-me-home" lighting" then

coni rm.

Example: setting the duration of the
"follow-me-home" lighting


Turn the dial to select the

"Lighting coni guration" menu,

then press it to coni rm.



Select the duration then press the

dial.



Turn the dial to set the value

required (15, 30 or 60 seconds),

then press the dial.



Select the "OK" box, then

coni rm.

The RT4 GPS audio/tele-

phone must reinitialise and

restart in order to change

the voice used by the voice

synthesiser (male or female)

or the language used by the
system.

For safety reasons, it is im-

perative that coni guration of

the multifunction displays by

the driver takes place when

stationary.

COMFORT

VENTILATION

1. Windscreen de-icing or demisting

vents.

2. Front window de-icing or demist-

ing vents.

Advice on operation

 If, when the vehicle has been

parked in the sun for a long time,
the interior temperature remains
very high, do not hesitate to ven-
tilate the passenger compartment
for a few minutes.

Place the air l ow control at a

level sufi cient to ensure a good

renewal of air in the passenger
compartment.

When the air l ow control is in posi-

tion 0 (deactivation of the system),
temperature related comfort is no

longer guaranteed but a slight l ow

of air, due to the movement of the
vehicle, can still be felt.

 For even air distribution, take care

not to obstruct the exterior air in-
take grille at the base of the wind-
screen, the vents, the air outlets
under the front seats and the air

extractor located behind the l aps

in the boot.

Check that the passenger com-

partment i lter is in good condi-

tion. Have the i lters replaced

regularly. If you drive in a dusty
environment, change them twice
as often.

Switch off the rear screen
and exterior mirrors demist-
ing as soon as you consider
this necessary as reducing
the current consumption re-

duces the fuel consumption.

3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.

COMFORT

HEATING/VENTILATION

2. Air l ow adjustment

The heating and ventilation only op-
erate when the engine is running.

Turn the control from posi-
tion 1 to position 4 to obtain

an air l ow sufi cient to en-

sure your comfort.

3. Air distribution adjustment

Windscreen, side windows
and footwells.

Footwells. (vents closed)

Centre and side vents.

Turn the control from blue
(cold) to red (warm) to ad-
just the temperature to your
requirements.

Windscreen and side win-
dows.

1. Temperature adjustment

The air distribution can be adjusted
by placing the control in an interme-
diate position, marked "



COMFORT

5. Demisting the rear screen and

exterior mirrors

Pressing the button once
demists the rear screen
and the exterior mirrors.
This switches off automati-
cally to prevent an exces-

sive consumption of current.
Pressing again reactivates demisting.
It is possible to stop demisting be-
fore it is switched off automatically by
pressing the button again.

4. Air intake/Air recirculation

Pressing button 4 permits
recirculation of the interior
air. This is indicated by il-
lumination of the indicator
light. As soon as possible,

press button 4 again to permit the
intake of outside air to prevent dete-
rioration of the air quality and avoid
misting of the windows. This is indi-
cated by the switching off of the indi-
cator light.

The recirculation of interior air en-
ables you to isolate the passenger
compartment from exterior odours
and smoke.
The outside air intake enables you to
prevent and eliminate the condensa-
tion on the windscreen and side win-
dows.
When the air recirculation is used
in a humid climate, there is a risk of
misting of the windows.

Rapid demisting of the windscreen
To quickly de-ice or demist the wind-
screen and side windows:

place the air distribution control
in the "windscreen and side win-
dows" position,

place air intake control button 4 in
the "Outside Air Intake" position,
(button 4 indicator light off),

place the temperature 1 and air

l ow 2 controls at maximum, as

indicated by the "Windscreen
and side windows" symbol on the
control panel,

close the centre vents.

COMFORT

MANUAL AIR CONDITIONING

2. Temperature adjustment

1. Air conditioning On/Off

Turn the control from blue
(cold) to red (warm) to ad-
just the temperature to your
requirements.

4. Air distribution adjustment

Windscreen and side win-
dows.

Windscreen, side windows
and footwells.

Footwells (vents closed).

The air conditioning is de-
signed to operate effectively
in all seasons, with the win-
dows closed. In summer, it
enables the temperature to

be lowered and in winter, above 0 °C,
it increases the effectiveness of the
demisting.
Press the switch, the indicator light
comes on.

The air conditioning does not op-

erate while the air l ow adjustment

control 3 is in position "0" .

Centre and side vents.

The air conditioning only operates
when the engine is running.

3. Air l ow adjustment

Turn the control from posi-
tion 1 to position 4 to obtain

an air l ow sufi cient to en-

sure your comfort.

The air distribution can be adjusted
by placing the control in an interme-
diate position, marked "



COMFORT

6. Demisting the rear screen and

the mirrors

Pressing the button once
demists the rear screen
and the exterior mirrors.
This switches off automati-
cally to prevent an exces-

sive consumption of current.
Pressing again reactivates demisting.
It is possible to stop demisting be-
fore it is switched off automatically by
pressing the button again.

In certain cases of particu-
larly arduous use (towing the
maximum load on a steep
gradient in high tempera-

tures), switching off the air condition-
ing permits the recovery of engine
power and therefore an increase in
the towing capacity.
In order for the air conditioning to be
fully effective, the windows must be
closed.
The air conditioning system does not
contain chlorine and does not pres-
ent any danger to the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
The water produced by the air con-
ditioning condensation is discharged
through an opening provided for this
purpose. Therefore, a puddle of wa-
ter may form underneath the vehicle
when stationary.
In order to ensure that the air condi-
tioning system operates correctly, reg-
ular checks are also recommended.
If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.

5. Air intake/Air recirculation

Pressing button 5 permits
recirculation of the interior
air. This is indicated by il-
lumination of the indicator
light.

As soon as possible, press button
5 again to permit the intake of out-
side air, to prevent deterioration of
the air quality and to avoid misting of
the windows. This is indicated by the
switching off of the indicator light.

The interior air recirculation enables
you to isolate the passenger com-
partment from exterior odours and
smoke.
The outside air intake enables you to
prevent and eliminate misting of the
windscreen and side windows.
Used simultaneously with the air con-
ditioning, air recirculation enables
performance to be improved.
Used in a humid climate, air recir-
culation may result in misting of the
windows.

Rapid demisting of the wind-

screen
To quickly de-ice or demist the wind-
screen and side windows:
-

place the air distribution control
in the "windscreen and side win-
dows" position,

place the temperature 2 and air

l ow 3 controls at maximum, as

indicated by the "Windscreen
and side windows" symbol on the
control panel,

close the centre vents,

switch air intake button 5 to the
"Outside Air Intake" position (but-
ton 5 indicator light off),

start the air conditioning by press-
ing button 1 .

Была ли эта страница вам полезна?

Да!Нет

Peugeot 307 (2007.5). Instruction — part 3

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.