Peugeot 2008 (2016 year). Instruction — part 19
![](/vehicles/anin/jesng/sthu/qundelonef.png)
287
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
The audio equipment will only play audio
files with".wma, .aac, .flac, .ogg and. mp3"
file extensions and with a bit rate of between
32 Kbps and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of file (.mp4,...) can be played.
".wma" files must be of the standard
wma 9 type.
The sampling rates supported are 32, 44 and
48 KHz.
It is advisable to restrict file names to
20 characters, without using of special
characters (e.g.: " " ? ; ù) to avoid any playing
and displaying problems.
Information and advice
Use only USB memory sticks formatted FAT 32
(file allocation table).
The system supports USB mass
storage devices, BlackBerry
®
devices
or Apple
®
players via USB ports. The
adaptor cable is not supplied.
Control of the peripheral device is with
the audio system controls.
Other peripherals, not recognised on
connection, must be connected to the
auxiliary socket using a Jack cable (not
supplied).
It is recommended that the USB cable
for the portable device is used.
The system does not support the
simultaneous connection of two
identical devices (two memory sticks,
two Apple
®
players) but it is possible
to connect one memory stick and one
Apple
®
player at the same time.
In order to be able to play a recorded CDR or
CDRW, when recording it is preferable to select
the ISO 9660 level 1, 2 or Joliet standard.
If the disc is recorded in another format it may
not be played correctly.
It is recommended that the same recording
standard is always used for an individual disc,
with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the
Joliet standard is recommended.
![](/vehicles/anin/jesng/sthu/jueak.png)
288
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Bluetooth
®
audio streaming
Streaming allows audio files on your telephone
to be played through the vehicle's speakers.
Connect the telephone: see the "Telephone"
section, then "Bluetooth".
Choose the "Audio" or "All" profile.
If play does not start automatically, it may be
necessary to start the audio playback from the
telephone.
Control is from the peripheral device or by
using the audio system buttons.
Once connected in streaming mode,
the telephone is considered to be a
media source.
It is recommended that you activate
"Repeat" on the Bluetooth peripheral.
Connecting Apple
®
players
Connect the Apple
®
player to the USB port
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
The classifications available are those
of the portable device connected
(artists / albums / genres / playlists /
audiobooks / podcasts).
The default classification used is by
artist. To modify the classification used,
return to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired track.
The version of software in the audio system
may not be compatible with the generation of
your Apple
®
player.
![](/vehicles/anin/jesng/sthu/slo.png)
289
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Managing the Jukebox
Connect the device (MP3 player...) to the USB
port or auxiliary Jack socket using a suitable
audio cable.
When no audio file is copied to the
system, which has a capacity of 8 GB,
all of the Jukebox function symbols are
greyed and are not available.
Select "Media list".
Select the magnifying glass to enter
the folder or album and select audio
file by audio file.
Select copy "Copy Jukebox".
Select "Confirm" then "Copy".
Select "Sort by folder".
Select "New folder" to create a
folder structure in the Jukebox.
"Sort by album".
Select "Keep structure" to retain the
structure from the device.
While copying the system returns
to the primary page; you can go
back to the copy view at any time by
selecting this button.
Or
Or
![](/vehicles/anin/jesng/sthu/gbr.png)
290
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Level 1
Settings
Level 2
Level 3
Audio settings
Audio settings
Audio settings
![](/vehicles/anin/jesng/sthu/kor.png)
291
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Level 3
Comments
Settings
Audio settings
Ambience
Choose the sound ambience.
Balance
Sound distribution using the Arkamys
®
system.
Sound effects
Set the volume or activate the link to vehicle
speed.
Ringtones
Set the telephone ringtone and volume.
Voice
Set the volume and voice for speaking street
names
Confirm
Save your settings.
Settings
Turn off screen
Function that turns off the display.
Pressing the screen reactivates it.
![](/vehicles/anin/jesng/sthu/outacte.png)
292
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Units
Display screen
Configuration
Adjust date and time
Factory settings
Level 1
Level 2
![](/vehicles/anin/jesng/sthu/yon.png)
293
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Comments
Settings
Secondary page
System Settings
Units
Set the units used to display distance, fuel
consumption and temperature.
Delete data
Select the desired data in the list then press
Delete.
Factory settings
Return to factory settings.
Confirm
Save the settings.
Settings
Secondary page
Time/Date
Confirm
Set the date and time then confirm.
Settings
Secondary page
Screen settings
Activate automatic text scrolling
Activate or deactivate the setting then confirm.
Activate animations
Confirm
![](/vehicles/anin/jesng/sthu/honithersho.png)
294
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Choice of language
Calculator
Configuration
Calendar
Level 1
Level 2
![](/vehicles/anin/jesng/sthu/say.png)
295
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Comments
Settings
Secondary page
Languages
Confirm
Select the language then confirm.
Settings
Secondary page
Calculator
Select the calculator.
Settings
Secondary page
Calendar
Select the calendar.
![](/vehicles/anin/jesng/sthu/mint.png)
296
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Audio settings
Press on Settings to display the
primary page.
Select "Audio settings".
Select "Ambience"
Or
"Balance"
Or
"Sound effects"
Or
"Ringtones"
Or
"Voice".
On-board audio: Arkamys
©
Sound
Staging optimises sound distribution in
the the passenger compartment.
The distribution (or spatialisation using
the Arkamys
®
system) of sound is an
audio process that allows the audio
quality to be adapted to the number of
passengers in the vehicle.
Available only with the 6-speaker
configuration.
The audio settings (Ambience, Bass:,
Treble: and Loudness) are different
and independent for each sound
source.
The settings for Distribution and
Balance are common to all sources.
-
"Ambience" (choice of 6 musical
ambiences)
- "Bass:"
- "Treble:"
- "Loudness" (Activate/Deactivate)
- "Distribution" ("Driver", "All
passengers", "Front only")
- "Audible response from touch screen"
- "Volume linked to speed" (Activate/
Deactivate)
![](/vehicles/anin/jesng/sthu/burd.png)
297
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Press on Settings to display the
primary page.
Press on Settings to display the
primary page.
Press on Settings to display the
primary page.
Press on the secondary page.
Press on the secondary page.
Press on the secondary page.
Select "System Settings".
Select "Time/Date" to change the
time zone, synchronisation with GPS,
the time and its format, then the date.
Select "Screen settings".
Select "Units" to change the units
of distance, fuel consumption and
temperature.
Select "Languages" to change
language.
Activate or deactivate "Activate
automatic text scrolling" and
"Activate animations".
Select "Delete data" to delete the
list of recent destinations, personal
points of interest, contacts in the list.
Select "Calculator" to display a
calculator.
Choose the item then select "Delete".
Select "Calendar" to display a
calendar.
Select "Factory settings" to return
to the original settings.
Modifying system settings
![](/vehicles/anin/jesng/sthu/hiowift.png)
298
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Connected services
Level 1
Level 2
Level 3
![](/vehicles/anin/jesng/sthu/ngomy.png)
299
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Internet browser
Authentication for Internet browsing via
a smartphone is done using the Dial-Up
Networking (DUN) standard.
Press on "Internet browser" to
display the browser home page;
first connect your smartphone by
Bluetooth, "Internet" option, see the
"Telephone" section.
Some smartphones of the latest
generation do not support this
standard.
Press on Connected services to
display the primary page.
![](/vehicles/anin/jesng/sthu/youngstarday.png)
300
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Usage monitor
Internet connection settings
Wi-Fi connection
Bluetooth (devices)
![](/vehicles/anin/jesng/sthu/and.png)
301
.
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Comments
Connected services
Secondary page
Bluetooth
connections
Search
Start the search for a device to connect.
Connect /Disconnect
Start or end the Bluetooth connection to the
selected device.
Update
Import contacts from the selected telephone to
save them in the audio system.
Delete
Delete the selected telephone.
Confirm
Save the settings.
Connected services
Secondary page
Transfer rate
Reset
Reset the usage monitor, them confirm.
Confirm
Connected services
Secondary page
Wi-Fi connection
All
Display all Wi-Fi networks.
Secure
Display secure Wi-Fi networks.
Remember
Memorise the selected Wi-Fi network(s).
Add
Add a new Wi-Fi network.
On/ Off
Activate or deactivate a Wi-Fi network.
Connect
Select a Wi-Fi network found by the system and
connect to it.
![](/vehicles/anin/jesng/sthu/ond.png)
302
Audio and Telematics
2008_en_Chap12b_SMEGplus_ed01-2016
MirrorLink
TM
Optional depending on the
smartphone and operating system.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст