Peugeot 308 SW BL Dag (2009.5). Instruction — part 2
38
INSTRUMENTS and CONTROLS
Total distance recorder
System which measures the total distance
travelled by the vehicle during its life.
The total and trip distances are dis-
played for thirty seconds when the igni-
tion is switched off, when the driver's
door is opened and when the vehicle is
locked or unlocked.
Trip distance recorder
System which measures a distance
travelled since it was reset to zero by
the driver.
With the ignition on, press the button
until zeros appear.
Manual Check
This function allows you to check the
status of the vehicle (reminder of the
warnings and of the "activated" or "de-
activated" status of the confi gurable
functions) and the service information.
With the engine running, to start
a manual check, briefl y press
the "CHECK/000" button on the
instrument panel.
If no faults have been detected,
"CHECK OK" appears on the large
central instrument panel screen.
If a "major" fault has been detected,
only the warning lamps concerned ap-
pear on the large central instrument
panel screen. Have it checked by a
PEUGEOT dealer.
If a "minor" fault has been detected, the
warning lamp concerned then "CHECK
OK" appear on the large central instru-
ment panel screen. Consult a PEUGEOT
dealer.
39
INSTRUMENTS and CONTROLS
Lighting rheostat
Permits manual adjustment of the brightness
of the instruments and controls in relation to
the exterior brightness. Only operates when
the vehicle lighting is on, with the exception
of the daytime running lamps.
Activation
Press the button to change the brightness
of the instruments and controls.
When the lighting reaches the minimum
setting, release the button, then press
again to increase it.
or
When the lighting reaches the maximum
setting, release the button, then press
again to reduce it.
When the lighting reaches the level of
brightness required, release the button.
Deactivation
When the vehicle lighting is off, or in
day mode on vehicles fi tted with day-
time running lamps, pressing the button
does not have any effect.
40
MULTIFUNCTION SCREENS
Displays on the screen
This displays the following information:
-
time,
-
date,
- ambient temperature * (this fl ashes if
there is a risk of ice),
-
status of the openings (doors,
boot...),
-
trip computer (refer to the end of the
section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Boot open") may ap-
pear temporarily. These can be cleared
by pressing the "ESC" button.
MONOCHROME SCREEN A
(WITHOUT PC SOUND)
Controls
General menu
There are three display control buttons:
-
"ESC" to abandon the operation in
progress,
-
"MENU" to scroll through the menus
or sub-menus,
-
"OK" to select the menu or sub-
menu required.
Press the "MENU" button to scroll
through the various menus of the
main menu :
- vehicle confi guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
* With air conditioning only.
!
41
MULTIFUNCTION SCREENS
Vehicle confi guration
Options
Once the "Options" menu has been se-
lected, you can start diagnostics of the
status of the equipment (active, not ac-
tive, faulty).
Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands,
Portugues,
Portugues-
Brasil, Deutsch, English, Espanol).
Display settings
Once the "Display settings" menu has
been selected, you can gain access to
the following settings:
-
year,
-
month,
-
day,
-
hour,
-
minutes,
-
12 or 24 hour mode.
Units
Once the "Units" menu has been se-
lected, you can change the units of the
following parameters:
-
temperature (°C or °F),
-
fuel consumption (l/100 km, mpg or
km/l).
Once you have selected a setting,
press the "OK" button to change its
value.
Wait for approximately ten seconds
without any action to allow the
changed data to be recorded or
press the "ESC" button to cancel.
The screen then returns to the normal
display.
Once the "Vehicle confi guration" menu
has been selected, you can activate or
deactivate the following equipment:
-
wiper linked with reverse gear (refer
to the "Visibility" section),
-
"guide-me-home"
and
welcome
lighting (refer to the "Visibility"
section),
-
daytime running lamps (refer to the
"Visibility" section),
-
rear parking sensors (refer to the
"Driving" section).
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
42
MULTIFUNCTION SCREENS
MONOCHROME SCREEN A
Controls
Displays on the screen
This displays the following information:
-
time,
-
date,
- ambient temperature * (this fl ashes if
there is a risk of ice),
-
status of the openings (doors,
boot...),
-
audio sources (radio, CD...),
-
trip computer (refer to the end of the
section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Boot open") may ap-
pear temporarily. These can be cleared
by pressing the "ESC" button.
Main menu
Press the "MENU" button for access
to the main menu , then press the
" " or " " buttons to scroll through
the various menus:
- radio-CD,
- vehicle confi guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
From the control panel of your PC Sound,
you can:
press the "MENU" button for access
to the main menu ,
press the " " or " " buttons to scroll
through the items on the screen,
press the "MODE" button to change
the
permanent
application
(trip
computer, audio source...),
press the " " or " " buttons to
change a setting value,
press the "OK"
button to confi rm,
or
press the "ESC" button to abandon
the operation in progress.
Radio-CD
With the PC Sound switched on, once
the "Radio-CD" menu has been select-
ed you can activate or deactivate the
functions linked with use of the radio
(RDS, REG), the CD or the CD changer
(introscan, shuffl e, CD repeat).
For more information on the "Radio-CD"
application, refer to the PC Sound part
of the "Audio and Telematics" section.
* With air conditioning only.
!
43
MULTIFUNCTION SCREENS
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
Display settings
Once the "Display settings" menu has
been selected, you can gain access to
the following settings:
-
year,
-
month,
-
day,
-
hour,
-
minutes,
-
12 or 24 hour mode.
Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-Brasil,
Deutsch, English, Espanol).
Units
Once the "Units" menu has been se-
lected, you can change the units of the
following parameters:
-
temperature (°C or °F),
-
fuel consumption (l/100 km, mpg or
km/l).
Once you have selected a setting,
press the " " or " " buttons to
change its value.
Press the " " or " " buttons to
switch respectively to the previous
or next setting.
Press the "OK" button to record
the change and return to the normal
display or press the "ESC" button to
cancel.
Vehicle confi guration
Options
Once the "Options" menu has been se-
lected, you can start diagnostics of the
status of the equipment (active, not ac-
tive, faulty).
Once the "Vehicle Confi guration" menu
has been selected, you can activate or
deactivate the following equipment:
-
wiper linked with reverse gear (refer
to the "Visibility" section),
-
"guide-me-home"
and
welcome
lighting (refer to the "Visibility"
section),
-
daytime running lamps (refer to the
"Visibility" section),
-
rear parking sensors (refer to the
"Driving" section).
44
MULTIFUNCTION SCREENS
MONOCHROME SCREEN C
Main menu
Displays on the screen
This displays the following information:
-
time,
-
date,
- ambient temperature * (this fl ashes if
there is a risk of ice),
-
status of the openings (doors,
boot...),
-
audio sources (radio, CD...),
-
trip computer (refer to the end of the
section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Automatic switching
on of the headlamps activated") may ap-
pear temporarily. These can be cleared
by pressing the "ESC" button.
"Audio functions" menu
Controls
From the control panel of your PC Sound,
you can:
press the "MENU" button for access
to the main menu ,
press the " " or " " buttons to scroll
through the items on the screen,
press the "MODE" button to change
the
permanent
application
(trip
computer, audio source...),
press the " " or " " buttons to
change a setting value,
press the "OK"
button to confi rm,
or
press the "ESC" button to abandon
the operation in progress.
Press the "MENU" button for access
to the main menu :
- audio functions,
- diagnosis vehicle,
- personalisation-confi guration,
- telephone (Bleutooth system).
Press the " " or " " buttons to select
the menu required, then confi rm by
pressing the "OK" button.
* With air conditioning only.
With the PC Sound switched on, once
this menu has been selected you can
activate or deactivate the functions
linked with use of the radio (RDS, REG,
RadioText), the CD or the CD changer
(introscan, shuffl e, CD repeat).
For more information on the "Audio
functions" application, refer to the PC
Sound part of the "Audio and Telemat-
ics" section.
45
MULTIFUNCTION SCREENS
"Diagnosis vehicle"
menu
Press the "MENU" button for access
to the main menu.
Press the arrows, then the "OK"
button to select the "
Diagnosis
vehicle " menu.
On the "
Diagnosis vehicle " menu,
select the following application:
Alert log
This summarises the active warning
messages, displaying them in succes-
sion on the multifunction screen.
Once this menu has been selected, you
can consult information concerning the
status of the vehicle, such as the alert
log.
Defi ne the vehicle parameters
Once this menu has been selected, you
can activate or deactivate the following
equipment:
-
wiper linked with reverse gear (refer
to the "Visibility" section),
-
"guide-me-home"
and
welcome
lighting (refer to the "Visibility"
section),
-
interior mood lighting (refer to the
"Visibility" section),
-
daytime running lamps (refer to the
"Visibility" section),
-
rear parking sensors (refer to the
"Driving" section).
"Personalisation-
Configuration" menu
Once this menu has been selected, you
can gain access to the following func-
tions:
- defi ne the vehicle parameters,
- display confi guration,
-
choice of language.
!
46
MULTIFUNCTION SCREENS
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
"Telephone" menu
Display confi guration
Once this menu has been selected, you
can gain access to the following set-
tings:
-
brightness-video setting,
-
date and time setting,
-
choice of units.
Choice of language
Once this menu has been selected,
you can change the language used
by
the
display
(Deutsch,
English,
Espanol, Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Türkçe ** ).
Example: setting of the duration of the
"guideme-home" lighting
Press the " " or " " buttons, then
the "OK" button to select the menu
required.
Press the " " or " " buttons,
then the "OK" button to select the
"Guide-me-home headlamps" line.
Press the " " or " " buttons to
set the value required (15, 30 or
60 seconds), then press the "OK"
button to confi rm.
Press the " " or " " buttons, then
the "OK" button to select the "OK"
box and confi rm or press the "ESC"
button to cancel.
With the PC Sound switched on, once
this menu has been selected you can
confi gure your Bluetooth system (pair-
ing), consult the various telephone di-
rectories (calls log, services...) and
manage your communications (pick up,
hang up, call waiting, secret mode...).
For more information on the "Telephone"
application, refer to the PC Sound part
of the "Audio and Telematics" section.
** According to country.
i
47
MULTIFUNCTION SCREENS
For operation of the retractable dis-
play (opening, closing, adjustment
of the position, etc.), refer to the
paragraph "Access to the retract-
able display".
Displays on the screen
Once the screen is unfolded, it displays
the following information automatically
and directly:
-
time,
-
date,
-
altitude,
-
ambient temperature (the value
displayed fl ashes if there is a risk of
ice),
-
openings check,
-
warning and vehicle function status
messages, displayed temporarily,
-
audio functions,
-
trip computer information,
-
satellite navigation system information.
From the PC Nav control panel, to se-
lect one of the applications:
press
the
dedicated
"RADIO" ,
"MUSIC" ,
"NAV" ,
"TRAFFIC" ,
"SETUP" or "PHONE" button for
access to the corresponding menu,
turn the navigator to move the
selection,
press the navigator to confi rm the
selection,
or
press the "ESC" button to abandon
the current operation and return to
the previous display.
SCREEN (WITH PC NAV)
Controls
For more information on these applica-
tions, refer to the "Audio and Telemat-
ics" section or to the specifi c user guide
given to you with the other owner's docu-
ments.
!
48
MULTIFUNCTION SCREENS
Press the "SETUP" button to gain
access to the "SETUP" menu.
This allows you to select from the
following functions:
- "Languages",
- "Date and time",
- "Display",
- "Vehicle parameters",
- "Units",
- "System parameters".
Languages
This menu allows you to select the language
used by the display: Deutsch, English,
Espanol, Français, Italiano, Nederlands,
Polski, Portugues, Türkçe * .
Date and time
This menu allows you to set the date
and time, the format of the date and the
format of the time (refer to the "Audio
and Telematics" section or to the specifi c
user guide given to you with the other
owner's documents).
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
System parameters
This menu allows you to restore the fac-
tory confi guration, display the software
version and activate scrolling text.
Vehicle parameters
This menu allows you to activate or
deactivate certain driving and comfort
equipment:
-
wiper linked with reverse gear (refer
to the "Visibility" section),
-
guide-me-home and welcome lighting
(refer to the "Visibility" section),
-
interior mood lighting (refer to the
"Visibility" section),
-
daytime running lamps (refer to the
"Visibility" section),
-
directional headlamps (refer to the
"Visibility" section),
-
rear parking sensors (refer to the
"Driving" section).
Display
This menu allows you to set the bright-
ness of the screen, the screen colour
scheme and the colour of the map (day/
night or auto mode).
Units
This menu allows you to select the
units: temperature (°C or °F) and con-
sumption (km/l, l/100 or mpg).
"SETUP" menu
* According to country.
i
49
MULTIFUNCTION SCREENS
16/9 HIGH DEFINITION
RETRACTABLE COLOUR
SCREEN (WITH PC COM 3D)
Displays on the screen
Once unfolded, it displays the following
information automatically and directly:
-
time,
-
date,
-
altitude,
-
ambient temperature (the value
displayed fl ashes if there is a risk of
ice),
-
audio functions,
-
parking sensors,
-
telephone and address book information,
-
satellite navigation system information.
From the PC Com 3D control panel, to
select one of the applications:
press
the
dedicated
"RADIO" ,
"MEDIA" ,
"NAV" ,
"TRAFFIC" ,
"ADDR BOOK" or "SETUP" button
for access to the corresponding
menu,
turn the navigator to move the
selection,
press the navigator to confi rm the
selection,
or
press the "ESC" button to abandon
the current operation and return to
the previous display.
For operation of the retractable
screen(opening, closing, adjustment
of the position, etc.), refer to the
paragraph "Access to the retractable
screen".
For more information on these applica-
tions, refer to the PC Com 3D part of the
"Audio and Telematics" section.
Controls
!
50
MULTIFUNCTION SCREENS
* According to country.
"SETUP" menu
Language and speech
This menu allows you to:
-
select the language used by the
display (Deutsch, English, Espanol,
Français,
Italiano,
Nederlands,
Polski, Portugues, Portugues-Brasil,
Türkçe * ),
-
select the voice recognition parameters
(activation/deactivation, advice on
use, personal voice programming,
etc.),
-
set
the
volume
of
the
voice
synthesiser.
Date and time
This menu allows you to set the date
and time, the format of the date and the
format of the time (refer to the PC Com
3D part of the "Audio and Telematics"
section.
Display
This menu allows you to set the bright-
ness of the screen, the screen colour
scheme and the colour of the map (day/
night or auto mode).
Units
This menu allows you to select the
units: temperature (°C or °F) and dis-
tance (miles or km).
System
This menu allows you to restore the fac-
tory confi guration, display the software
version and activate scrolling text.
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
Press the "SETUP" button to gain
access
to
the
"SETUP" menu.
This allows you to select from the
following functions:
- "Language and speech",
- "Date and time",
- "Display",
- "Units",
- "System".
i
i
51
MULTIFUNCTION SCREENS
This screen is opened and stored auto-
matically.
However, you can also open it, store it
and adjust it using the various manual
controls:
-
opening or storing by means of
control A ,
-
angle adjustments by means of
control B .
It is also fi tted with safety auto-reverse
protection.
Opening the screen
With the screen stored, press
control A to open it.
The screen opens automatically when
the ignition is switched on, when the au-
dio and telematics system is switched
on, when an outgoing telephone call is
made, when a voice command is given
and when a warning message linked with
the STOP warning lamp is received.
Closing the screen
With the screen open, press control A
to store it.
The screen is stored automatically when
the ignition is switched off, after approxi-
mately three seconds, if the audio and
telematics system is off.
If you wish the screen to open or
close automatically when the audio
and telematics system is switched
on or off, the screen must not be
closed when the audio and tele-
matics system is operating.
When the screen is open, you can adjust
it precisely in different ways:
press the corresponding part of
control B to move the screen towards
you or towards the windscreen,
or
push or pull the screen gently by
hand.
Adjusting the position of the screen
Safety auto-reverse
If the screen meets an obstacle as it
opens or closes, the movement stops
immediately and is reversed by a few
millimetres.
After clearing the obstacle, issue the
command required again.
Storing the position of the screen
The system has four pre-set positions
in its memory.
Each time the screen is closed, the
system stores the last position of the
screen.
Each time the screen is re-opened, the
system returns the screen to the pre-set
position closest to that stored.
If you close the screen during op-
eration of the audio and telematics
system, it will re-open automatically
when an outgoing telephone call is
made, when a voice command is
given or when a warning message
linked with the STOP warning lamp
is received.
Access to the retractable screen
52
MULTIFUNCTION SCREENS
TRIP COMPUTER
Press the button, located at the end
of the wiper stalk , to display the
various items of trip computer data
in succession.
The trip computer provides the following
information:
System which provides current informa-
tion concerning the trip travelled (range,
fuel consumption...).
Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the average
speed.
Monochrome screen A
Zero reset
Data displays
-
range,
-
current fuel consumption,
-
distance travelled,
-
average fuel consumption,
-
average speed.
The next press then returns you to
the normal display.
!
i
i
54
MULTIFUNCTION SCREENS
Route zero reset
With the monochrome screen C or
the instrument panel large screen
When the trip required is displayed,
press the control for more than two
seconds.
With the instrument panel PC Com
3D
16/9 large screen
A few definitions…
When the range falls below 20 miles
(30 km), dashes are displayed. After fi ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer.
This function is only displayed from
20 mph (30 km/h).
This value may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current fuel con-
sumption.
Range
(miles or km)
This indicates the distance
which can still be travelled
with the fuel remaining in the tank in
relation to the average fuel consump-
tion over the last few miles (kilometres)
travelled.
Current fuel consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption during the last few
seconds.
Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption since the last trip
computer zero reset.
Distance travelled
(miles or km)
This indicates the distance
travelled since the last trip
computer zero reset.
Average speed
(mph or km/h)
This is the average speed calcu-
lated since the last trip computer
zero reset (ignition on).
Distance remaining to
destination
(miles or km)
This is the distance remaining
to be travelled to the fi nal destination. It
is either calculated instantly by the navi-
gation system, if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
When the required trip is displayed,
press the "OK" button on the
navigator, associated with the PC
Com 3D, for more than two seconds.
Trips "1" and "2" are independent but
their use is identical.
Trip "1" permits, for example, daily calcula-
tions, and trip "2" monthly calculations.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст