Peugeot 308 SW BL Dag (2009.5). Instruction — part 3

i

53

MULTIFUNCTION SCREENS

- The current information

tab with:

the range,

the current fuel

consumption,

the distance remaining

to be travelled.

Monochrome screen C

Data displays
With the monochrome screen C or

the instrument panel large screen

Instrument panel PC Com 3D

16/9 large screen

- The trip "1" tab with:

the distance travelled,

the average fuel

consumption,

the average speed,

for the fi rst trip.

- The trip "2" tab with:

the distance travelled,

the average fuel

consumption,

the average speed,
for the second trip.

TRIP COMPUTER

System which provides current infor-
mation concerning the route travelled
(range, fuel consumption…).

Instrument panel large screen

Depending on your vehicle's equip-
ment, the trip computer informa-
tion appears on the multifunction
screen or on the large screen in the
instrument panel.

 Pressing the button again takes you

to a black screen.

A further press returns you to the
normal display.

 Press the button, located at the

end of the wiper stalk , to display
the various trip computer tabs in
succession.

With the instrument panel PC Com
3D

16/9 large screen

 Press the up and down arrows on

the navigator, associated with the
PC Com 3D, to display the various
trip computer tabs in succession.

!

i

i

54

MULTIFUNCTION SCREENS

Route zero reset
With the monochrome screen C or

the instrument panel large screen

 When the trip required is displayed,

press the control for more than two
seconds.

With the instrument panel PC Com
3D

16/9 large screen

A few definitions…

When the range falls below 20 miles

(30 km), dashes are displayed. After fi ll-

ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).

If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer.

This function is only displayed from
20 mph (30 km/h).

This value may vary following a
change in the style of driving or

the relief, resulting in a signifi cant

change in the current fuel con-
sumption.

Range
(miles or km)
This indicates the distance
which can still be travelled

with the fuel remaining in the tank in
relation to the average fuel consump-
tion over the last few miles (kilometres)
travelled.

Current fuel consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption during the last few
seconds.

Average fuel

consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption since the last trip
computer zero reset.

Distance travelled
(miles or km)
This indicates the distance
travelled since the last trip
computer zero reset.

Average speed
(mph or km/h)
This is the average speed calcu-
lated since the last trip computer
zero reset (ignition on).

Distance remaining to

destination
(miles or km)
This is the distance remaining

to be travelled to the fi nal destination. It

is either calculated instantly by the navi-
gation system, if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.

 When the required trip is displayed,

press the "OK" button on the
navigator, associated with the PC
Com 3D, for more than two seconds.

Trips "1" and "2" are independent but
their use is identical.
Trip "1" permits, for example, daily calcula-
tions, and trip "2" monthly calculations.

55

COMFORT

VENTILATION

Air treatment

The incoming air follows various routes
depending on the controls selected by
the driver:
-

direct arrival in the passenger
compartment (air intake),

-

passage through a heating circuit
(heating),

-

passage through a cooling circuit
(air conditioning).

The temperature control enables you to
obtain the level of comfort required by
mixing the air of the various circuits.

The air distribution control enables you
to diffuse the air in the passenger com-
partment combining several air vents.
The air fl ow control enables you to in-

crease or reduce the speed of the venti-
lation blower.

Air intake

The air circulating in the passenger com-

partment is fi ltered and originates either

from the outside via the grille located at
the base of the windscreen or from the
inside in air recirculation mode.

Control panel

The controls of this system are grouped
together on control panel A on the centre
console. Depending on the model, the
functions offered are:
-

level of comfort required,

- air fl ow,
-

air distribution,

-

demisting and defrosting,

-

manual or automatic air conditioning
controls.

Air diffusion

1. Windscreen demisting vents.
2. Front side window demisting/defrost-

ing vents.

3. Side adjustable air vents.
4. Central adjustable air vents.
5. Air outlets to the front footwells.
6. Adjustable air vents for the rear pas-

sengers.

7. Air outlets to the rear footwells.

i

i

56

COMFORT

If after an extended stop in sunshine,
the interior temperature is very high,

fi rst ventilate the passenger com-

partment for a few moments.
Put the air fl ow control at a setting

high enough to quickly change the
air in the passenger compartment.
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.

In order for these systems to be fully effective, follow the operation and main-
tenance guidelines below:
 To obtain an even air distribution, take care not to obstruct the exterior air

intake grilles located at the base of the windscreen, the nozzles, the vents
and the air outlets, as well as the air extractor located in the boot.

 Do not cover the sunshine sensor, located on the dashboard; this is used

for regulation of the air conditioning system.

 Operate the air conditioning system for at least 5 to 10 minutes, once or

twice a month to keep it in perfect working order.



Ensure that the passenger compartment fi lter is in good condition and

have the fi lter elements replaced regularly (refer to the "Checks" section).

We recommend the use of a combined passenger compartment fi lter.

Thanks to its special active additive, it contributes to the purifi cation of

the air breathed by the occupants and the cleanliness of the passenger
compartment (reduction of allergic symptoms, bad odours and greasy
deposits).

 To guarantee correct operation of the air conditioning system, you are also

advised to have it checked regularly as recommended in the Warranty and
Maintenance Record.

 If the system does not produce cold air, deactivate it and contact a

PEUGEOT dealer.

When towing the maximum load on a steep gradient in high temperatures,
switching off the air conditioning increases the available engine power and so
improves the towing ability.

The condensation created by the
air conditioning results in a dis-
charge of water under the vehicle
which is perfectly normal.

i

57

COMFORT

2. Air fl ow adjustment

 Turn the dial from position 1

to position 5 to obtain a

comfortable air fl ow.

Windscreen, side windows and
footwells.

Footwells.

Central and side vents.

 Turn the dial from blue

(cold) to red (hot) to adjust
the temperature to your
requirements.

Windscreen and side windows.

1. Temperature adjustment

The air distribution can be
adapted by placing the dial in
an intermediate position.

The heating/ventilation or air conditioning
systems can only operate with the engine
running.

4. Air intake/Air recirculation
The intake of exterior air prevents the
formation of mist on the windscreen and
side windows.
The recirculation of interior air isolates
the passenger compartment from exte-
rior odours and smoke.
Return to exterior air intake as soon
as possible to prevent deterioration of
the the air quality and the formation of
mist.



If you place the air fl ow control

in position 0 (deactivation of the
system), the temperature is no
longer maintained at a comfortable

level. However, a slight fl ow of

air, due to the movement of the
vehicle, can still be felt.

3. Air distribution adjustment

 Press the button to recir-

culate the interior air. The
indicator lamp comes on to

confi rm this.

 Press the button again to permit the

intake of exterior air. The indicator

lamp switches off to confi rm this.

HEATING/VENTILATION

MANUAL AIR CONDITIONING

58

COMFORT

5. Air conditioning On/Off

The air conditioning is de-
signed to operate effectively in
all seasons, with the windows
closed.

It enables you to:
-

lower the temperature, in summer,

-

increase the effectiveness of the
demisting in winter, above 3 °C.

Switching off
 Press the "A/C" button again, the

associated green indicator lamp
switches off.

Switching on
 Press

the

"A/C"

button,

the

associated green indicator lamp
comes on.

The air conditioning does not op-

erate when the air fl ow adjustment

control 2 is in position "0".

FRONT DEMIST - DEFROST

These markings on the control
panel indicate the control po-
sitions for rapid demisting or
defrosting of the windscreen
and side windows.

With the heating/ventilation

system



Put the temperature and air fl ow

controls to the dedicated marked
position.

 Put the air intake control to the

"Exterior air intake" position

(control indicator lamp off).

 Put the air distribution control to the

"Windscreen" position.

With the manual air

conditioning system



Put the temperature and air fl ow

controls to the dedicated marked
position.

 Put the air intake control to the

"Exterior air intake" position

(indicator lamp on the control off).

 Put the air distribution control to the

"Windscreen" position.

 Switch on the air conditioning by

pressing the "A/C" button; the
associated green warning lamp
comes on.

58

COMFORT

5. Air conditioning On/Off

The air conditioning is de-
signed to operate effectively in
all seasons, with the windows
closed.

It enables you to:
-

lower the temperature, in summer,

-

increase the effectiveness of the
demisting in winter, above 3 °C.

Switching off
 Press the "A/C" button again, the

associated green indicator lamp
switches off.

Switching on
 Press

the

"A/C"

button,

the

associated green indicator lamp
comes on.

The air conditioning does not op-

erate when the air fl ow adjustment

control 2 is in position "0".

FRONT DEMIST - DEFROST

These markings on the control
panel indicate the control po-
sitions for rapid demisting or
defrosting of the windscreen
and side windows.

With the heating/ventilation

system



Put the temperature and air fl ow

controls to the dedicated marked
position.

 Put the air intake control to the

"Exterior air intake" position

(control indicator lamp off).

 Put the air distribution control to the

"Windscreen" position.

With the manual air

conditioning system



Put the temperature and air fl ow

controls to the dedicated marked
position.

 Put the air intake control to the

"Exterior air intake" position

(indicator lamp on the control off).

 Put the air distribution control to the

"Windscreen" position.

 Switch on the air conditioning by

pressing the "A/C" button; the
associated green warning lamp
comes on.

i

59

COMFORT

The control button is located on
the heating or air conditioning
system control panel.

REAR SCREEN DEMIST -

DEFROST

 Switch

off

the

demisting/

defrosting of the rear screen
and door mirrors as soon as
appropriate as lower current
consumption results in reduced
fuel consumption.

If the engine is switched off before
the demisting/defrosting is switched
off automatically, demisting/defro-
sting will resume next time the en-
gine is switched on.

Switching on

The rear screen demisting/defrosting
can only operate when the engine is
running.
 Press this button to demist/defrost

the rear screen and (depending
on version) the door mirrors. The
indicator lamp associated with the
button comes on.

Switching off

The demisting/defrosting switches off
automatically to prevent an excessive
consumption of current.
 It is possible to stop the demisting/

defrosting operation before it is
switched off automatically by pressing
the button again. The indicator lamp
associated with the button switches
off.

i

i

60

COMFORT

When the engine is cold, to prevent
too great a distribution of cold air,

the air fl ow will reach its optimum

level gradually.
In cold weather, it favours the dis-
tribution of warm air to the wind-
screen, side windows and footwells
only.

On entering the vehicle, if the in-
terior temperature is much colder
or warmer than the comfort value,
there is no need to change the val-
ue displayed in order to obtain the
comfort required. The system cor-
rects the difference in temperature
automatically and as quickly as
possible.

The air conditioning only operates when
the engine is running.

The driver and his front pas-
senger can each adjust the
temperature to their require-
ments.

 Turn control 2 or 3 to the left or to

the right respectively to decrease or
increase this value.

A setting around the value 21 provides
optimum comfort. However, depend-
ing on your requirements, a setting be-
tween 18 and 24 is normal.
You are advised to avoid a left/right set-
ting difference of more than 3.

4. Automatic visibility programme

The automatic comfort pro-

gramme may not be suffi cient

to quickly demist or defrost
the windscreen and side win-
dows (humidity, several pas-
sengers, ice, etc.).

Automatic operation

 Press the "AUTO" button.

The indicator lamp on the
button comes on.

2. Driver's side adjustment

DUAL-ZONE DIGITAL AIR

CONDITIONING

We recommend the use of this mode: it
permits automatic and optimised adjust-
ment of all of the functions, passenger

compartment temperature, air fl ow, air

distribution and air recirculation, in ac-
cordance with the comfort value that you
have chosen.
This system is designed to operate ef-
fectively in all seasons, with the windows
closed.

The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit.

 To switch it off, press the

"visibility"

button again or press the "AUTO"
button, the indicator lamp on the
button switches off and the indicator
lamp on the "AUTO" button comes
on.

1. Automatic comfort programme

3. Passenger side adjustment

 In this case, select the automatic

visibility programme.

The system automatically controls the

air conditioning, the air fl ow and the air

intake and provides optimum distribu-
tion of the ventilation to the windscreen
and side windows.

!

i

61

COMFORT

Manual operation

If you wish, you can make a different
choice from that offered by the system
by changing a setting. The other func-
tions will still be controlled automati-
cally.
 Pressing the "AUTO" button returns

the system to completely automatic
operation.

 Press this button to switch

off the air conditioning.

6. Air distribution adjustment

 Press one or more buttons to

direct the air fl ow towards:

7. Air fl ow adjustment

 Turn this control to the left

to decrease the air fl ow or

to the right to increase the

air fl ow.

8. Air intake/Air recirculation

Switching the system off



Turn the air fl ow control to the left

until all of the indicator lamps switch
off.

This action switches off the air condi-
tioning and the ventilation.
Temperature related comfort is no longer

guaranteed but a slight fl ow of air, due

to the movement of the vehicle, can still
be felt.


Turn the air fl ow dial to the right

or press the "AUTO" button to
reactivate the system with the values
set before it was switched off.

 Press

this

button

for

recirculation of the interior
air. The indicator lamp on
the button comes on.

5. Air conditioning On/Off

Avoid prolonged operation in inte-
rior air recirculation mode or driving
for long periods with the system off
(risk of condensation and deterio-
ration of the air quality).

-

the windscreen and side windows
(demisting or defrosting),

-

the windscreen, the side windows
and the vents,

-

the windscreen, the side windows,
the vents and the footwells,

-

the vents and the footwells,

-

the vents,

-

the footwells,

-

the windscreen, the side windows
and the footwells.

The air fl ow indicator lamps, between

the two fans, come on progressively in
relation to the value requested.

 As soon as possible, press this

button again to permit the intake of
outside air and prevent the formation
of condensation. The indicator lamp
on the button switches off.

For maximum cooling or heating
of the passenger compartment, it
is possible to exceed the minimum
value 14 or the maximum value 28.
 Turn control 2 or 3 to the left

until "LO" is displayed or to the
right until "HI" is displayed.

9. Mono-zone/Dual-zone

 Press this button to equalise

the comfort value on the
passenger side with that
on the driver's side (mono
zone). The indicator lamp
on the button comes on.

Air recirculation enables the passenger
compartment to be isolated from exte-
rior odours and smoke.

Switching the system off could result in
discomfort (humidity, condensation).
 Press this button again to return

to automatic operation of the air
conditioning. The indicator lamp on
the "A/C" button comes on.

62

COMFORT

FRONT SEATS

Seat consisting of a seat cushion, a seat
back and a head restraint which can all
be adjusted to adapt your position for
ease of driving and comfort.

Forwards-backwards adjustment
 Raise the control and slide the seat

forwards or backwards.

Driver's or passenger's seat height

adjustment
 Pull the control upwards to raise

or push it downwards to lower, as
many times as necessary, to obtain
the position required.

Seat back angle adjustment
 Push the control rearwards.

Manual adjustments

i

63

COMFORT

FRONT SEATS

Seat consisting of a seat cushion, a seat
back and a head restraint which can all
be adjusted to adapt your position for
ease of driving and comfort.

Forwards-backwards adjustment
 Push

the

control

forwards

or

rearwards to slide the seat.

Seat cushion height and angle

adjustment
 Tilt the rear part of the control

upwards or downwards to obtain the
required height.

 Tilt the front part of the control

upwards or downwards to obtain the
required angle.

Seat back angle adjustment
 Tilt the control forwards or rearwards

to adjust the angle of the seat back.

Driver's seat electric

adjustments

The electrical functions of the driv-
er's seat are deactivated approxi-
mately one minute after the ignition
is switched off.
To reactivate them, switch on the
ignition.

!

i

64

COMFORT

Access to the rear seats (3-door)
 Pull the control upwards to fold

the seat back and move the seat
forward.

When put back in place, the seat
returns to its initial position.

Head restraint height adjustment

 To raise the head restraint, pull it

forwards and upwards at the same
time.

 To remove the head restraint, press

the lug A and pull the head restraint
upwards.

 To put the head restraint back in

place, engage the head restraint
stems in the openings keeping them
in line with the seat back.

 To lower the head restraint, press

the lug A and the head restraint at
the same time.

The head restraint is fi tted with a

frame with notches which prevents
it from lowering; this is a safety de-
vice in case of impact.

The adjustment is correct when

the upper edge of the head re-

straint is level with the top of the

head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.

Lumbar adjustment
 Turn the dial to obtain the correct

lumbar position.

Additional adjustments

Ensure that no person or object
prevents the seat slide from return-
ing to its initial position; the return to
this position is necessary for longi-
tudinal locking.

i

65

COMFORT

Table position for front
passenger seat

Placing this seat in the table position, with
the rear seats also in the table position,
allows you to transport long objects.
 Pull the control upwards to fold the

seat back onto the seat cushion.

To lower the seat back fully, tilt the
seat back angle adjustment control.

 Pull the control again to release the

seat back and raise it.

When put back in place, the seat
back returns to its initial position.

Do not forget to fold the "aircraft"

type table fi xed on the back of the

seat fi rst.

Heated seats control
With the engine running, the front seats
can be heated separately.

 Use the adjustment dial, placed on

the side of each front seat, to switch
on and select the level of heating
required:

0 : Off.
1 : Low.
2 : Medium.
3 : High.

i

!

66

COMFORT

Storing driving positions

System which takes into account the
electrical settings of the driver's seat
and exterior mirrors. It enables you to
store up to two positions using the but-
tons on the side of the driver's seat and
two further driving positions using the
two remote control keys.

Recalling a stored position
When the vehicle is unlocked, the driv-
er's seat and the door mirrors return to
the position stored by the remote con-
trol key.

Storing a position

Storing a new position cancels the
previous position.

When the ignition is off, after a few
consecutive position recalls, the
function will be deactivated until
the engine is started, to prevent
discharging of the battery.

Using the remote control keys
When the vehicle is locked, the remote
control key stores the position of the
driver's seat and door mirrors.
Each remote control key can store one

specifi c setting.

Ignition on


Briefl y press button 1 or 2 to recall

the corresponding position.

An audible signal is heard indicating
the end of the adjustment.

Vehicle moving
 Press and hold button 1 or 2 until

the audible signal is heard indicating
the end of the adjustment.

Using buttons M/1/2
 Switch on the ignition.
 Adjust your seat and the door

mirrors.

 Press button M , then press button 1

or 2 within four seconds.

An audible signal is heard indicating
that the position has been stored.

i

65

COMFORT

Table position for front
passenger seat

Placing this seat in the table position, with
the rear seats also in the table position,
allows you to transport long objects.
 Pull the control upwards to fold the

seat back onto the seat cushion.

To lower the seat back fully, tilt the
seat back angle adjustment control.

 Pull the control again to release the

seat back and raise it.

When put back in place, the seat
back returns to its initial position.

Do not forget to fold the "aircraft"

type table fi xed on the back of the

seat fi rst.

Heated seats control
With the engine running, the front seats
can be heated separately.

 Use the adjustment dial, placed on

the side of each front seat, to switch
on and select the level of heating
required:

0 : Off.
1 : Low.
2 : Medium.
3 : High.