Peugeot 5008 (2023 year). Manual in english — page 4
Ease of use and comfort
- Aluminium TNF inverted dome tweeter:
Charging is managed by the smartphone.
Checking operation
optimal sound dispersion, detailed treble.
With the Keyless Entry and Start system, the
The state of the indicator lamp allows the
- 12 channel active amplification - 515 Watts
charger’s operation may be briefly disrupted
operation of the charger to be monitored.
Hybrid Class AB/Class D technology: breadth
when a door is opened or the ignition is switched
State of the
Meaning
and finesse in the high frequency signals, as well
off.
indicator lamp
as real power in the bass.
- Subwoofer with high excursion Power
Charging
Off
Engine switched off.
FlowerTM triple coil technology: deep and
► With the charging area clear, place a device
No compatible devices
controlled reproduction of low frequencies.
in its centre.
detected.
Charging complete.
Wireless smartphone
Fixed green
Compatible portable
When the portable device is detected, the
charger
device detected.
charger’s indicator lamp lights up green. It
Charging.
remains lit for the whole time that the battery is
being charged.
Flashing orange
Foreign object detected in
the charging zone.
The system is not designed to charge
Portable device not well
multiple devices simultaneously.
centred in the charging
zone.
Do not leave metal objects (e.g. coins,
keys, vehicle remote control) in the
Fixed orange
Malfunction of the
charging area while a device is being charged
portable device's battery
This system allows wireless charging of a
- Risk of overheating or interrupting the
meter.
portable device such as a smartphone, using the
charging!
Device battery
magnetic induction principle, in accordance with
temperature too high.
the Qi 1.1 standard.
Charger malfunction.
The portable device to be charged must be
compatible with the Qi standard, either by design
or by using a compatible holder or shell.
If the indicator lamp is fixed orange:
When using applications for a long time
A mat can also be used provided that it is
- remove the device, then place it back in the
in combination with wireless charging,
approved by the Manufacturer.
centre of the charging zone.
some smartphones may switch to thermal
The charging area is identified by the Qi symbol.
or
safety and cause some functions to stop.
The charger works with the engine running and
with the Stop & Start system in STOP mode.
64
Ease of use and comfort
- remove the device and try again in a quarter
The small removable tray can be installed in
When fitting it on the driver's side, only use
3
of an hour.
front of or behind the storage space.
the mountings present on the carpet (a "click"
If the problem persists, have the system checked
A ventilation nozzle circulates fresh air.
indicates proper locking).
by a PEUGEOT dealer or a qualified workshop.
The other mats are simply laid over the carpet.
Closing
Front armrest
Removing/refitting
It includes a refrigerated storage space.
► To remove it on the driver's side, move the
seat backwards and unclip the fasteners.
Opening
► To refit it, position the mat and secure it by
pressing down.
► Check that the mat is secured correctly.
To avoid any risk of jamming the pedals:
- Only use mats which are suited to the
fixings already present in the vehicle; these
fixings must be used.
► Fold back the two parts of the cover.
- Never fit one mat on top of another.
The use of mats not approved by PEUGEOT
Mats
may interfere with access to the pedals and
► Press the lever beneath the cover.
hinder the operation of the cruise control/
The cover opens in two parts.
Fitting
speed limiter.
The approved mats have two fasteners
Storage
located underneath the seat.
65
Ease of use and comfort
- when the key is removed from the ignition
Courtesy lamps
Interior ambient lighting
switch.
The dimmed passenger compartment lighting
- when a door is opened.
improves visibility inside the vehicle when the
- when the remote control locking button is
light is poor.
activated, in order to locate the vehicle.
Activation/deactivation and adjustment of
It switches off gradually:
the light intensity are set via the Driving/
- when the vehicle is locked.
Vehicle touch screen menu.
- when the ignition is switched on.
- 30 seconds after the last door is closed.
Permanently off.
Rear fittings
1.
Front courtesy lamp
2.
Front reading lamps
Permanent lighting.
12 V accessory socket
In "Permanent lighting" mode, the lighting time
varies according to the circumstances:
- With the ignition off, approximately 10 minutes.
- In energy saving mode, approximately 30
seconds.
- With the engine running, unlimited.
When the front courtesy lamp is in the
"Permanent lighting" position, the rear
► To connect a 12 V accessory (maximum
courtesy lamp also comes on, unless it is in
power: 120 W), lift the cover and plug in a
the "Permanently off" position.
3.
Rear courtesy lamp
suitable adaptor.
To switch off the rear courtesy lamp, put it in
4.
Rear reading lamps
the "Permanently off" position.
The connection of an electrical device
not approved by PEUGEOT, such as a
Front and rear courtesy
USB charger, may adversely affect the
Reading lamps
operation of vehicle electrical systems,
lamps
► With the ignition on, operate the
causing faults such as poor radio reception or
In this position, the courtesy lamp comes
corresponding switch.
interference with displays in the screens.
on gradually:
Do not place anything against the
– when the vehicle is unlocked.
courtesy lamps.
66
Ease of use and comfort
USB sockets
The armrest incorporates two cup holders.
3
Ski flap
Device for storing and transporting long objects.
Opening
► With the rear armrest lowered, open the flap
by pulling its handle downwards.
Each USB socket is used only to power or
► To use the table, lower it fully until it locks in
recharge a portable device.
the low position.
► To store it, raise the table to the high position,
Rear armrest
passing the point of resistance.
On the passenger side, do not forget to
fold it before placing the backrest in the
"table" position.
For more information on the Front seats, and
in particular placing the backrest in the "table"
position, refer to the corresponding section.
Do not place hard or heavy objects on
the table.
They could become dangerous projectiles in
the event of emergency braking or impact.
► Load the objects from inside the boot.
"Aircraft" type tables
Side blinds
67
Ease of use and comfort
On the left-hand side, it may also contain the
temporary puncture repair kit.
► To open them, lift the cover by the notch.
Boot fittings
Fitted to the second row windows, they protect
the passenger compartment from the sun's rays.
► Pull the central tab to unroll the blind.
► Position the blind's clip on the hook.
1.
Load space cover roller
Always guide the blind slowly, using the
2.
12 V accessory socket (max. 120 W)
tab, while raising or lowering it.
3.
Boot lamp
4.
Luggage retaining strap
5.
Storage brackets of the load space cover
Storage boxes
roller
6.
Armrest with cup holder and storage
compartment
7.
Open storage compartment
1.
Load space cover shelf
8.
Concertina panels
2.
12V accessory socket (max. 120W)
9.
Stowing rings
3.
Boot lamp
4.
Rear seat folding controls
The stowing rings are designed to secure
5.
Hooks
luggage using different types of retaining
6.
Stowing rings
nets.
7.
Boot floor
These retaining nets are available as an
Depending on version, the storage boxes are
8.
Storage well/Tool box under the floor
option or as an accessory.
fitted in the floor, at the foot of the side seats on
9.
Open storage compartments
For more information, contact a PEUGEOT
the second row.
dealer or a qualified workshop.
68
Ease of use and comfort
For information on installing the High load
In the event of sudden deceleration,
3
retaining net, refer to the corresponding
objects placed on the load space cover
section.
roller can turn into projectiles.
Load space cover shelf
Installation
To remove the load space cover shelf:
► Unhook the two cords.
► Raise the movable section slightly, then
unclip it on each side.
► Unclip the fixed section on each side, then
take out the load space cover shelf.
The load space cover shelf can be stowed under
► Position the left-hand and right-hand ends of
the boot floor.
the roller in cut-outs A, with the moving flap at
In the event of sudden deceleration,
the front.
objects placed on the load space cover
► Unwind the roller until it reaches the boot
It consists of two sections:
shelf can turn into projectiles.
pillars.
- a fixed section with an open storage space.
► Insert the roller guides into the rails in pillars
- a movable section which rises when the boot
B.
is opened, with an open storage space.
Load space cover roller
In the 5-seat configuration, it is installed behind
the second row seats, with the third row seats
stored folded away.
In the 7-seat configuration, it is stored behind the
third row seats.
69
Ease of use and comfort
Removal
► Position the roller within the space located
above the armrest, one side after the other, tilting
it slightly.
► Slide the roller as far as possible, until it
reaches the notches at the back of the boot, with
the two hinges facing down.
► Unfold the 3rd row seats.
The folded concertina panels can be placed in
the horizontal or upright position.
To fold the 3rd row seats with the roller stored at
the back, it is necessary to raise the concertina
panels in order to give access to the seat
unlocking controls (red straps).
► Remove the roller guides from the rails in
pillars B.
High load retaining net
► Guide the roller as it reels in.
► Unlock the roller by pressing one of the
handles located at the ends of the roller bracket.
Storage behind the 3rd row seats
This removable net allows the entire loading
volume up to the roof to be used:
- behind the front seats (1st row) when the rear
seats are folded down.
- behind the rear seats (2nd row) when the load
space cover is removed.
It protects the occupants in case of
sudden braking.
► Make sure that the 3rd row seats are folded.
► Fold the first two concertina panels.
70
Ease of use and comfort
Behind the front seats
Behind the rear seats
Behind the front seats
3
(Depending on version)
► Remove the load space cover.
► Fold down the rear seats.
► Remove the trim covers on each side,
► Fold down the rear seats.
► Insert the ends of the bar, one after the other,
located in the upper section in the roof.
► Remove the trim covers on each side,
into the fixing points in the roof.
► Position the net's upper hooks in the roof.
located in the upper section in the roof.
► Remove the caps from the Top Tether fixings.
► Attach the straps of the net to the lower rings,
► Position the net's upper hooks in the roof.
► Attach the net’s straps to the lower anchorage
located on each side trim of the boot.
► Attach the net’s straps to the lower anchorage
points, located in the housing of the Top Tether
► Pull on the straps to stretch the net.
points, located directly below the fixings of the
fixings.
rear bench seat cushion.
► Pull on the straps to stretch the net.
► Pull on the straps to stretch the net.
Once fitted, the net does not prevent
tipping of the rear backrests.
71
Ease of use and comfort
Behind the rear seats
On certain versions, the adjustable boot
floor cannot be fitted in the low position.
To change the height:
► Lift and pull the floor towards you using its
central handle, then use the lateral stops to
move it.
► Push the floor all the way forwards to place it
in the desired position.
► Remove the load space cover roller.
► Insert the ends of the bar, one after the other,
into the fixing points in the roof.
► Attach the straps of the net to the lower rings,
► Lift the boot floor as far as possible or lift the
located on each side trim of the boot.
articulated boot mat (depending on version) to
► Pull on the straps to stretch the net.
access the storage well.
Depending on version, it includes:
2-position boot floor
- A temporary puncture repair kit with the tool
To keep it in the inclined position:
kit.
► From the high position, lift the floor towards
- A spare wheel with the tool kit.
the load space cover.
- The traction battery charging cable
► Take it past the retractable stops, then rest
(Rechargeable hybrid).
This two-position floor allows the boot volume to
the floor on these stops.
The load space cover can also be stored here
be optimised using the lateral stops located on
(depending on version).
the sides:
Storage well
- High position (100 kg max.): to obtain a flat
12 V accessory socket
floor up to the front seats, when the rear seats
► To connect a 12 V accessory (maximum
are folded down.
power: 120 W), lift the cover and plug in a
- Low position (150 kg max.): maximum boot
suitable adaptor.
volume.
► Switch on the ignition.
72
Ease of use and comfort
The connection of an electrical device
3
not approved by PEUGEOT, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio reception or
interference with displays in the screens.
Boot lamp
It comes on automatically when the boot is
opened and goes off automatically when the
boot is closed.
The lighting time varies according to the
circumstances:
- When the ignition is off, approximately 10
minutes.
- In energy saving mode, approximately 30
seconds.
- With the engine running, unlimited.
73
Lighting and visibility
These two functions are activated/
Lighting control stalk
deactivated via the Adaptive lighting
menu of the touch screen.
Main lighting
Headlamp dipping
► Rotate the ring forwards/backwards to turn
them on/off.
When the lighting is switched off automatically
("AUTO" position) the foglamps and the dipped
beam headlamps remain on.
Switching on the foglamps is prohibited
in clear weather or in rain, both day and
Automatic illumination of lamps/daytime
night. In these situations, the power of their
running lamps
► Pull the lighting control stalk to switch
beams may dazzle other drivers. They must
Sidelamps only
between dipped and main beam headlamps.
only be used in fog or falling snow (rules may
In "AUTO" and sidelamps mode, pull the lighting
vary depending on country).
Dipped or main beam headlamps
control stalk to switch the main beam headlamps
Do not forget to switch off the foglamps when
on directly ("headlamp flash").
they are no longer necessary.
"Highway function"
Display
Switching off of the lamps when the
With "Full LED" technology headlamps,
Illumination of the corresponding indicator
ignition is switched off
the range of the dipped beam headlamps is
lamp on the instrument panel confirms that the
When the ignition is switched off, all of the
automatically increased once the speed of the
selected lighting is on.
lamps turn off immediately, except for dipped
vehicle is above 68 mph (110 km/h).
A fault with a lamp is signalled by the
beam headlamps if automatic guide-me-home
permanent illumination of this warning
lighting is activated.
"Foggy function"
lamp, accompanied by the display of a message
With "Full LED" technology headlamps,
and an audible signal.
Switching on the lamps after
in order to limit the “whiteout” effect when
switching off the ignition
driving in fog, the brightness of the dipped
Rear foglamps
If the driver's door is opened, a temporary
beam headlamps is decreased automatically
They only work if the dipped or main
audible signal warns the driver that the lamps
when the rear foglamps are switched on.
beam headlamps are on.
are on.
74
Lighting and visibility
They will go off automatically after a period
Daytime running lamps/
Three flashes
4
of time that depends on the level of charge in
Sidelamps
► Press briefly upwards or downwards, without
the battery (entering energy economy mode).
going beyond the point of resistance; the
These LED lamps at the front and rear of the
direction indicators will flash 3 times.
vehicle light up automatically when the engine
In some weather conditions (e.g. low
The lighting of the rear LED direction indicators
starts.
temperature or humidity), misting on the
is scrolling.
They perform the following functions:
internal surface of the glass of the headlamps
- Daytime running lamps (lighting control stalk
and rear lamps is normal, and will disappear
Parking lamps
at position "AUTO" with adequate ambient light).
after the lamps have been on for a few
(Depending on version)
- Sidelamps (lighting control stalk at position
minutes.
Vehicle side marking by lighting the sidelamps
"AUTO" with low ambient light or "Sidelamps
on the traffic side only.
only" or "Dipped/main beam headlamps").
Never look too closely at the light beam
► Within one minute after switching off the
of LED technology lamps - risk of serious
ignition, operate the lighting control stalk
eye injury!
Direction indicators
upwards or downwards, depending on the side
of the traffic (e.g. when parking on the right, push
the lighting control stalk down to light up on the
left).
This is confirmed by an audible signal and the
lighting of the corresponding direction indicator
lamp on the instrument panel.
► To switch off the parking lamps, return the
lighting control stalk to the central position.
Travelling abroad
Vehicles equipped with manual
► Left or right: lower or raise the lighting control
headlamp beam height adjustment:
stalk, beyond the point of resistance.
If planning to use your vehicle in a country
If you keep the direction indicators on for
that drives on the other side of the road, the
more than 20 seconds, the volume of the
dipped beam headlamps must be adjusted to
audible signal will increase if the speed is
avoid dazzling oncoming drivers. Contact a
above 50 mph (80 km/h).
PEUGEOT dealer or a qualified workshop.
75
Lighting and visibility
Headlamp beam height
Automatic illumination of
adjustment
lamps
0
(Initial setting)
With the lighting control stalk in the “AUTO”
Driver only or driver + front passenger
Manual adjustment of LED
position and if a low level of exterior brightness
1 Driver only or driver + front passenger + row 3
is detected by the rain/sunshine sensor, the
technology headlamps
2 7 people
sidelamps and dipped beam headlamps are
3 7 people + load in the boot
switched on automatically, without any action on
4 Not used
the part of the driver. They may also come on if
5 Driver only + load in the boot
rain is detected, at the same time as automatic
6 Not used
operation of the windscreen wipers.
As soon as the brightness returns to a sufficient
Automatic adjustment of
level or after the windscreen wipers are switched
the Full LED technology
off, the lamps are switched off automatically.
headlamps
To avoid dazzling other road users, the height
Malfunction
of these headlamp beams must be adjusted
This system automatically adjusts the height of
In the event of a malfunction of the rain/
according to the load in the vehicle.
the headlamp beams according to the load in the
sunshine sensor, the vehicle’s lamps
vehicle.
come on and this warning lamp is displayed on
In the event of a malfunction, this warning
the instrument panel, accompanied by an
lamp comes on on the instrument panel,
audible signal and/or the display of a message.
accompanied by the display of a message and
0
(Initial setting)
Have it checked by a PEUGEOT dealer or a
an audible signal.
Driver only or driver + front passenger
qualified workshop.
The system places the headlamp beams in the
1 5 people
lowest position.
Do not cover the rain/sunshine sensor
2 Not used
Have it checked by a PEUGEOT dealer or a
located at the top centre of the
3 5 people + load in the boot
qualified workshop.
windscreen behind the interior rear view
4 Not used
mirror; the associated functions would no
5 Driver only + load in the boot
Do not touch the "Full LED" technology
longer be controlled.
6 Not used
headlamps - risk of electrocution!
In fog or snow, the rain/sunshine sensor
may detect sufficient light. For this
76
Lighting and visibility
reason, the lighting will not come on
You can activate/deactivate this function
- If the windscreen is dirty, misted-up or
4
automatically.
and adjust the welcome lighting duration
masked (e.g. sticker) in front of the camera.
in the Driving / Vehicle touch screen menu.
- If the vehicle is facing highly reflective signs
The inner surface of the windscreen may
or safety barrier reflectors.
Door mirror spotlamps
The system is not able to detect:
become misted up and affect the proper
operation of the rain/sunshine sensor.
These spotlamps facilitate access to the vehicle
- Road users that do not have their own
In humid and cold weather, demist the
by lighting the ground near the front doors.
lighting, such as pedestrians.
windscreen regularly.
When the front courtesy lamp switch is in
- Vehicles with hidden lighting (e.g. travelling
this position, the spotlamps come on
behind a safety barrier on the motorway).
automatically:
- Vehicles at the top or bottom of a steep
- when the vehicle is unlocked.
slope, on winding roads, on crossroads.
Guide-me-home and
- when a door is opened.
welcome lighting
- when a request to locate the vehicle is
Maintenance
received from the remote control.
Clean the windscreen regularly,
Guide-me-home lighting
Whatever the position of the front courtesy lamp
particularly the area in front of the camera.
switch, they also come on with the welcome
The internal surface of the windscreen can
With the ring of the lighting control stalk in the
lighting and guide-me-home lighting functions.
also become misted around the camera.
"AUTO" position and when the light is poor, the
They go off automatically after 30 seconds.
In humid and cold weather, demist the
dipped beam headlamps come on automatically
when the ignition is switched off.
windscreen regularly.
You can activate/deactivate this function
Do not allow snow to accumulate on the
Automatic lighting
and adjust the guide-me-home lighting
bonnet or roof of the vehicle as this could
systems - General
obstruct the camera.
duration in the Driving/Vehicle touch screen
menu.
recommendations
The automatic lighting systems use a detection
Welcome lighting
Automatic headlamp
camera, located at the top of the windscreen.
When the vehicle is unlocked, if the ambient
dipping
light is low and the "Automatic illumination of
Operating limits
headlamps" function is activated, this system
The system may be disrupted or not work
For more information, refer to the
automatically turns on certain exterior lamps
correctly:
General recommendations for
as well as certain lamps in the passenger
- When visibility conditions are poor
automatic lighting systems.
compartment.
(e.g. snowfall, heavy rain).
77
Lighting and visibility
With the ring of the lighting control stalk in the
Activation/Deactivation
► Switch the headlamps manually between
"AUTO" position and the function activated on
dipped and main beam to pause the function.
The settings are changed via the Driving/
the touch screen, this system automatically
If the "AUTO" and "Dipped beam" indicator
Vehicle touch screen menu.
switches between dipped and main beam
lamps were on, the system changes to main
The state of the system is stored when the
headlamps, according to lighting and traffic
beam.
ignition is switched off.
conditions, using a camera located at the top of
If the "AUTO" and "Main beam" indicator lamps
the windscreen.
were on, the system changes to dipped beam.
Operation
► To reactivate the function, once again switch
If the ambient light level is very low and traffic
the headlamps manually between dipped and
conditions permit:
main beam.
- The main beam headlamps
come on automatically. These
indicator lamps light up on the instrument panel.
Static cornering lighting
If the ambient light level is sufficient and/or the
traffic conditions do not allow the main beam
headlamps to be lit:
- The dipped beam headlamps
remain lit. These indicator lamps
light up on the instrument panel.
The function is deactivated if the foglamps
This system is a driving aid.
are switched on or if the system detects poor
The driver remains responsible for
visibility conditions (e.g. fog, heavy rain,
the vehicle's lighting, its correct use in the
snowfall).
prevailing light, visibility and traffic conditions,
When the foglamps are switched off or when the
and for compliance with driving and vehicle
visibility conditions become favourable again, the
With the dipped or main beam headlamps on,
regulations.
function is automatically reactivated.
this function allows headlamps to illuminate
This indicator lamp goes out when the
the inside of a bend using light-emitting diodes
The system becomes operational when
function is deactivated.
(LEDs).
the vehicle exceeds 16 mph (25 km/h).
The speed of the vehicle must be less than 56
When the speed falls below 9 mph (15 km/h),
Pause
mph (90 km/h).
the function is no longer operational.
This function is only available with the "Full LED"
If the situation requires a change of headlamp
technology headlamps.
beam, the driver can take over at any time.
78
Lighting and visibility
Activation / Deactivation
conditions are met, an alert is triggered if there is
not available (in "Night Vision"mode), the
4
a risk of collision.
indicator lamp comes on in grey.
It is set via the Driving / Vehicle touch
The permanent display disappears upon
If all operating conditions are met, the
screen menu.
switching off the ignition or if the conditions are
indicator lamp comes on in green: the
not met.
display on the instrument panel (with "Night
Switching on / off
Vision" mode selected) and the triggering of
This system operates from a certain angle of
This system is a driving aid system that
alerts are available.
rotation of the steering wheel.
cannot, under any circumstances,
If certain operating conditions (speed or
The system does not operate:
replace the driver's assessment of night-time
temperature) are not met, the indicator
- below a certain angle of rotation of the
visibility and traffic conditions.
lamp comes on in orange: only the display on the
steering wheel.
In some cases, the differences in temperature
instrument panel is available (in "Night Vision"
- above 56 mph (90 km/h),
are insufficient and the system may not detect
mode).
- when reverse gear is engaged.
all dangers or, conversely, it may give false
Whilst the exterior light is too bright or the dipped
warnings (e.g. engines of lorries parked by
beam headlamps have not been switched on,
the side of the road).
Night Vision
the alerts are not available.
Activation/Deactivation
This function is set via the Driving/
Vehicle touch screen menu.
Conditions for operation
- With the engine running and in Stop mode
of Stop & Start.
- Very low light conditions with dipped beam
This system identifies and signals the presence
headlamps on and in good working order.
of pedestrians and animals in the driver's field
- Temperature between -30°C and +28°C.
of vision, in low exterior light conditions, using
- Speed below 99 mph (160 km/h).
an infrared camera located at the front of the
- Detection of animals taller than 0.50 m.
vehicle.
Select the "Night vision" display mode if you
Operation
want the infrared camera image to be displayed
If the function is selected but the display
constantly on the instrument panel. When the
on the instrument panel and the alerts are
79
Lighting and visibility
- Camera masked by snow, mud or dust.
Wiper control stalk
- Camera scratched after going through roller
car washes repeatedly.
Before operating the wipers in wintry
- Very high outside temperature.
conditions, clear any snow, ice or frost
- At the top or bottom of a steep slope.
from the windscreen and around the wiper
- On a very winding road.
arms and blades.
- In a bend.
- After an impact which may have impaired the
The camera detection range is between 15 m
Do not operate the wipers on a dry
camera settings or damaged it.
(for pedestrians) and 200 m, depending on
windscreen. In extremely hot or cold
- After repainting of the grille outside of the
visibility conditions.
weather, check that the wiper blades are not
PEUGEOT dealer network or a qualified
The image provided by the camera is displayed
stuck to the windscreen before operating the
workshop.
in shades of grey in the instrument panel; warm
wipers.
objects appear brighter than cold objects.
Maintenance
If pedestrians or animals are detected, they
After using an automatic car wash, you
appear in yellow frames.
recommendations
may temporarily notice abnormal noises
If the system detects a risk of
The infrared camera has a wash nozzle
and poorer wiping performance. You do not
collision with pedestrians or
connected to the vehicle’s front screenwash
need to replace the wiper blades.
animals, it triggers an alert: one of these symbols
system.
appears on the instrument panel. The
This nozzle operates every 5th use of the
corresponding silhouette is framed in red.
screenwash.
Windscreen wipers
If the "Night Vision" display mode has not been
Regularly check that the camera is clean.
selected, the alert is triggered in the form of a
In bad weather, or in wintry conditions, ensure
temporary window.
that the camera is not covered with mud, ice or
In the event of an alert, the driver may act by
snow.
making an avoiding manoeuvre or by braking.
Malfunction
Operating limits
If the event of a malfunction, this warning
The following situations may interfere with
lamp comes on in orange on the
the operation of the system or prevent it from
instrument panel, accompanied by the display of
working:
a message.
► To select the wiping speed: raise or lower the
- Poor visibility conditions (falling snow, heavy
Have it checked by a PEUGEOT dealer or a
stalk to the desired position.
rain, thick fog).
qualified workshop.
80
Lighting and visibility
Fast wiping (heavy rain)
Windscreen wash
Off
4
► Pull the wiper control stalk towards you and
Normal wiping (moderate rain)
Intermittent wiping
hold.
A final wiping cycle is performed when
Intermittent wiping (proportional to the
Screenwash-wipe
screenwashing ends.
vehicle’s speed)
Switching off
The windscreen wash jets are
incorporated into the tip of each wiper
Reverse gear
Automatic wiping
arm.
When reverse gear is engaged, the rear wiper
Screenwash fluid is sprayed along the length
will come into operation automatically if the front
Refer to the corresponding section.
of the wiper blade. This improves visibility and
windscreen wipers are operating.
reduces screenwash fluid consumption.
The settings are changed via the Driving/
Single wipe
Vehicle touch screen menu.
► Pull the stalk briefly towards you.
To avoid damaging the wiper blades, do
In the event of accumulation of snow or
not operate the screenwash if the
In position 1 or 2, the wiping frequency is
hard frost or if a bicycle carrier is fitted to
screenwash reservoir is empty.
automatically reduced when the speed of
a towing device, deactivate the automatic rear
Only operate the screenwash if there is no
the vehicle drops below 3 mph (5 km/h).
wiper via the vehicle configuration menu.
risk of the fluid freezing on the windscreen
When the speed is above 6 mph (10 km/h)
and hindering visibility. During the winter
again, the wiping frequency returns to the
period, use "very cold climate" rated products.
Rear screenwash
original frequency (fast or normal).
Never top up with water.
► Turn the ring all the way towards the
dashboard and hold.
If the ignition has been switched off with
The screenwash and the wiper operate for as
the windscreen wipers active, you must
Rear wiper
long as the ring remains turned.
operate the control stalk again to reactivate
A final wiping cycle is performed when
wiping when the ignition is switched on again
screenwashing ends.
(unless the ignition was off for less than
a minute).
Automatic windscreen
wipers
After switching off the ignition, a slight
► Turn the ring to align the desired symbol with
movement of the windscreen wipers to
In AUTO mode, the windscreen wipers operate
the marking.
store them under the bonnet may occur.
automatically and adapt to the intensity of the
rainfall.
81
Lighting and visibility
Detection is via a rain/brightness sensor, located
This indicator lamp goes off in the
Before removing a windscreen wiper blade
at the top centre of the windscreen behind the
instrument panel, accompanied by a
rear view mirror.
message.
Do not cover the rain/sunshine sensor.
If the ignition has been off for more than
When using an automatic car wash,
one minute, the automatic wipers must
switch off the automatic wipers and the
be reactivated by pushing the control stalk
ignition.
downwards.
In winter, wait until the windscreen is
completely clear of ice before activating the
Malfunction
automatic wipers.
If a fault occurs with the automatic wipers, the
wipers operate in intermittent mode.
Switching on
Have it checked by a PEUGEOT dealer or a
Operating the wiper control stalk within one
qualified workshop.
minute after switching off the ignition will place
the wiper blades in a vertical position.
Special position of the
► Proceed with the desired operation or the
windscreen wipers
replacement of the wiper blades.
This maintenance position is used while cleaning
After refitting a windscreen wiper blade
or replacing the wiper blades. It can also be
► To return the wiper blades to their initial
useful, in wintry weather (ice, snow), to release
position after the operation, switch on the ignition
► Give a short downwards push to the control
the wiper blades from the windscreen.
and operate the wiper control stalk.
stalk.
To maintain the effectiveness of the flat
A wiping cycle confirms that the instruction has
wiper blades, it is advisable to:
been accepted.
- handle them with care.
This indicator lamp lights up on the
- clean them regularly using soapy water.
instrument panel, accompanied by a
- avoid using them to hold cardboard on the
message.
windscreen.
- replace them at the first signs of wear.
Switching off
► Give the control stalk another brief push
downwards or place the control stalk in another
position (Int, 1 or 2).
82
Lighting and visibility
Changing a wiper blade
► Unclip the worn wiper blade closest to you
4
and remove it.
Removing/Refitting at the front
► Install the new wiper blade and clip it to the
arm.
► Repeat the procedure for the other wiper
blade.
► Starting with the wiper blade closest to you,
once again hold each arm by the rigid section,
then guide it carefully onto the windscreen.
Removing/refitting at the rear
► Hold the arm by the rigid section and raise it
as far as possible.
► Clean the rear screen using screenwash
fluid.
► Carry out these wiper blade replacement
► Unclip the worn wiper blade and remove it.
operations from the driver's side.
► Install the new wiper blade and clip it to the
► Starting with the wiper blade farthest from
arm.
you, hold each arm by the rigid section and raise
► Once again hold the arm by the rigid section,
it as far as possible.
then guide it carefully onto the rear screen.
Take care not to hold the arms at the jet
locations.
Do not touch the wiper blades - risk of
irreparable deformation.
Do not release them while moving them. Risk
of damaging the windscreen!
► Clean the windscreen using screenwash
fluid.
Do not apply "Rain X" type water-
repellent products.
83
Safety
PEUGEOT dealers or qualified workshops,
General safety
Hazard warning lamps
equipped with the special tools required (risk
recommendations
of malfunctions of the vehicle's electronic
systems that could cause breakdowns or
Do not remove the labels attached in
serious accidents). The Manufacturer cannot
different places on your vehicle. They
be held responsible if this advice is not
include safety warnings as well as
followed.
identification information for the vehicle.
- Any modification or adaptation not intended
or authorised by PEUGEOT or carried out
For all work on your vehicle, use a
without meeting the technical requirements
qualified workshop that has the technical
defined by the Manufacturer will result in the
► Pressing this red button causes all the
information, skills and equipment required, all
suspension of the commercial warranty.
direction indicators to flash.
of which a PEUGEOT dealer is able to
They can work with the ignition switched off.
provide.
Installation of accessory radio
communication transmitters
Automatic operation of
Depending on country regulations,
Before installing a radio communication
hazard warning lamps
certain safety equipment may be
transmitter with an external aerial, you must
mandatory: high visibility safety vests,
without fail contact a PEUGEOT dealer for
When braking in an emergency, depending on
warning triangles, breathalysers, spare bulbs,
the specification of transmitters which can
the rate of deceleration, the hazard warning
spare fuses, fire extinguisher, first aid kit, mud
be fitted (frequency, maximum power, aerial
lamps come on automatically. They switch off
flaps at the rear of the vehicle, etc.
position, specific installation requirements),
automatically when you next accelerate.
They can be turned off by pressing the button
in line with the Vehicle Electromagnetic
again.
Installing electrical accessories:
Compatibility Directive (2004/104/EC).
- The fitting of electrical equipment or
accessories not approved by PEUGEOT may
Declarations of conformity for radio
cause excessive current consumption and
equipment
faults and failures with the electrical system
The relevant certificates are available on the
of your vehicle. Contact a PEUGEOT dealer
brand website:
for information on the range of approved
accessories.
- As a safety measure, access to the
diagnostic socket, used for the vehicle's
electronic systems, is reserved strictly for
84
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст