Peugeot Landtrek (2023 year). Manual in english — page 2
Access
Anti-theft protection
Complete unlocking
Keyless Entry and Start
Do not modify the electronic vehicle
► Press one of the front door handles (at the
immobiliser, as this might result in
markings).
malfunctions.
Opening the windows
For vehicles with a key ignition switch,
Depending on version, pressing and holding
remember to remove the key and turn the
the handle opens the windows to the desired
steering wheel to engage the steering lock.
position.
Locking the vehicle
Selective unlocking
Driving with the doors locked could make
Driver's door
it more difficult for the emergency services
► Press the driver’s door handle (at the
to enter the passenger compartment in an
marking).
emergency.
► Once inside the vehicle, to unlock all
As a safety precaution, remove the key from
This system allows the unlocking, locking
accesses, press the central unlocking button or
the ignition or take the electronic key with you
and starting of the vehicle, while carrying the
pull the opening control on any door.
when leaving the vehicle, even for a short
electronic key on your person in the recognition
Complete or selective unlocking, and
time.
zone A.
deactivation of the alarm depending on
version, is confirmed by the flashing of the
Unlocking the vehicle
Purchasing a second-hand vehicle
direction indicators.
Have the key codes memorised by a
Depending on version, the door mirrors unfold.
PEUGEOT dealer, to ensure that the keys
Locking the vehicle
in your possession are the only ones able to
start the vehicle.
► Selective unlocking (driver's door) is
configured by pressing this button on the
remote control for approximately 5 seconds
(confirmed by an audible signal) or via the
► Press one of the front door handles (at the
Vehicle settings touch screen menu.
markings).
Selective unlocking is deactivated by default.
It is not possible to lock the vehicle if one of the
electronic keys is left inside the vehicle.
Closing the windows
22
Access
Pressing and holding the handle closes the
As a safety measure, never leave the
Central locking
2
windows.
vehicle, even for a short time, without
taking the Keyless Entry and Start system’s
When closing windows, ensure that no
electronic key with you.
person or object could prevent their
Be aware of the risk of theft of the vehicle if
correct closure.
the key is present in one of the defined areas
The locking, and the activation of the alarm
while the vehicle is unlocked.
depending on version, is confirmed by the
temporary lighting of the direction indicators.
To preserve the battery charge in the
Depending on version, the door mirrors fold.
electronic key and the vehicle's battery,
the "hands-free" functions are set to
Advice
hibernation mode after 21 days without use.
Manual
To restore these functions, press one of the
► Press these buttons to lock/unlock the vehicle
If one of the doors or the boot is still open
remote control buttons or start the engine with
doors from inside the vehicle.
or if the electronic key for the Keyless
the electronic key against the back-up reader.
Entry and Start system has been left inside
Central locking does not take place if any
For more information on starting with the
the vehicle, central locking will not take place.
of the doors are open.
Keyless Entry and Start system, refer to the
However, if the vehicle is fitted with an alarm,
corresponding section.
it will be activated after 45 seconds.
When locking from the outside
Electrical interference
When the vehicle is locked from the
If the vehicle is unlocked but the doors
outside, the button does not work.
The electronic key may not work if it is
are not subsequently opened, the vehicle
► After locking, pull one of the interior door
close to an electronic device (e.g. mobile
will automatically lock itself again after about
controls to unlock the vehicle.
telephone (switched on or on standby), laptop
30 seconds. If the vehicle is fitted with an
computer, strong magnetic fields). If this
alarm, it will be reactivated automatically.
occurs, move the electronic key away from
The automatic relocking function is configured
Automatic (anti-intrusion
the electronic device.
via the touch screen’s vehicle configuration
security)
menu.
The doors can lock automatically while driving
(speed above 12 mph (20 km/h)).
Depending on version, the automatic
The automatic locking while driving
door mirror folding/unfolding function is
(activated by default) is configured via the
configured by pressing the folding/unfolding
Vehicle settings touch screen menu.
button on the mirrors control.
23
Access
► Insert the key in the door lock.
Locking
Back-up procedures
► Turn the key towards the front/rear to unlock/
lock the vehicle.
Lost keys, remote control,
If the vehicle is fitted with an alarm, it will
electronic key
not be activated when locking with the
Go to a PEUGEOT dealer with the vehicle's
key.
registration certificate, your personal
If the alarm is activated, the siren sounds
identification documents and if possible, the label
when the door is opened; start the engine to
bearing the key code.
stop it.
The PEUGEOT dealer will be able to retrieve the
key code and the transponder code, enabling a
► Open the doors.
new key to be ordered.
Central locking not
► For the rear doors, check that the child lock
functioning
is not on.
Complete unlocking/locking
Refer to the corresponding section.
Use these procedures in the following cases:
of the vehicle with the key
► Gently insert the key into the latch located
- Central locking malfunction.
in the door lock, then turn the latch towards the
Use this procedure in the following situations:
- Battery disconnected or discharged.
inside of the door.
- Remote control battery discharged.
In the event of a malfunction of the
► Close the doors and check from the outside
- Remote control malfunction.
central locking system, the battery must
that the vehicle is locked.
- Vehicle battery discharged.
be disconnected to ensure that the vehicle is
- Vehicle in an area subject to strong
locked fully.
Changing the battery
electromagnetic interference.
A message is displayed on the instrument panel
In the first case, change the remote control
when the battery needs changing.
battery.
Driver's door
In the second case, reinitialise the remote
► Turn the key towards the rear of the vehicle
control.
to lock it, or towards the front to unlock it.
Refer to the corresponding sections.
Other doors
Unlocking
► Pull the interior door opening control.
24
Access
Battery type: CR2032/3 volts.
► Remove the printed circuit from the unit and
Risk of explosion if the battery is
2
turn it over (with Keyless Entry and Start).
replaced with an incorrect type!
Without Keyless Entry and Start
► Remove the flat battery from its housing.
Replace the battery with the same type.
► Put the new battery in place, respecting the
polarity.
Risk of explosion or leaking of
► Put the printed circuit in place, respecting the
inflammable liquid or gas!
direction of fitting (with Keyless Entry and Start).
Do not use in/store in/place in an environment
► Clip the cover onto the unit.
where the temperature is extremely high or
► Reinitialise the remote control.
where the pressure is extremely low due to
For more information on Reinitialising the
very high altitude.
remote control, refer to the corresponding
Do not try to burn, crush or cut a used battery.
section.
Do not throw remote control batteries
Reinitialising the remote
away, as they contain metals that are
control
harmful to the environment. Take them to an
approved disposal point.
Following replacement of the battery or in
With Keyless Entry and Start
the event of a fault, it may be necessary to
reinitialise the remote control.
This equipment contains a button type
To reinitialise the remote control, visit a
battery.
PEUGEOT dealer or a qualified workshop.
Do not swallow the battery. Risk of chemical
burns!
Swallowing the battery can cause serious
Doors
internal burning in only 2 hours and can be
fatal.
Opening
If batteries have been swallowed or inserted
into a part of the body, seek immediate
From outside
medical advice.
► After unlocking the vehicle or with the
Keep new and used batteries out of the reach
"Keyless Entry and Start" system electronic key
of children.
in the recognition zone, pull the door handle.
If the battery compartment does not close
► Unclip the cover by inserting a small
properly, stop using the product and keep it
screwdriver in the slot and lift the cover.
out of the reach of children.
25
Access
From inside
Never drive with the tailgate down.
The maximum load on the tailgate is
► Pull the interior opening control of a door; this
Ensure that there are no people or
100 kg. A heavier load could damage the
unlocks the vehicle completely.
obstacles present (on the ground and higher
brackets.
up) when unloading.
With selective unlocking activated:
Never place your hands near the bracket
- Opening the driver's door unlocks
Opening to 180°
when handling the tailgate, there is a risk of
the driver's door only (if the vehicle has not
trapping your fingers.
already been completely unlocked).
The loading bay tailgate is heavy, open it
- Opening one of the passenger doors
carefully.
unlocks the rest of the vehicle.
Observe the payload indicated on the
manufacturer's label present on the vehicle.
Regularly check that the suspensions are in
Closing
good condition and that the tyres are inflated
If a door is not properly closed, a message is
to the recommended pressure.
displayed on the instrument panel if the engine
Spread the load evenly in the loading bay.
is running, accompanied by an audible signal
when the vehicle is travelling at more than 12
mph (20 km/h).
Opening to 90°
Depending on version, it is possible to increase
the opening angle to around 180°.
Tailgate
► After opening the tailgate, raise the tailgate
slightly by pulling the brackets in the opposite
Safety recommendations
direction of operation.
► When the position is obtained, remove the
brackets from their shaft on both sides of the
tailgate.
Closing
► Depending on version, unlock the tailgate
► Raise the tailgate until the locks latch into
with the dedicated key.
place.
► Pull the opening handle then lower the
tailgate, supporting it until it is held in place by
the retaining brackets.
26
Access
Depending on version, if the brackets
The exterior perimeter monitoring is activated
the remote control or the Keyless Entry and Start
2
have been detached, be sure to reinstall
after 5 seconds.
system, the direction indicators and the warning
them before closing the tailgate again.
lamp on the instrument panel stop flashing.
If an opening (door or bonnet) is not
Check that the 2 locks are correctly locked by
closed correctly, exterior perimeter
pulling the tailgate on each side.
Failure of the remote control
monitoring cannot be activated.
To deactivate the monitoring functions:
► Unlock the vehicle using the key in the
Alarm
Deactivation
driver's door lock.
► Press the remote control unlocking
► Open the door; the alarm is triggered.
(Depending on version)
button.
► Switch on the ignition and start the engine;
System which protects and provides a deterrent
or
this stops the alarm. The indicator lamp on the
against theft and break-ins.
► Unlock the vehicle with the Keyless Entry and
instrument panel goes off.
Exterior perimeter monitoring
Start system.
The system checks for opening of the vehicle.
The monitoring system is deactivated: the
Locking the vehicle without
The alarm is triggered if anyone tries to open a
indicator lamp on the instrument panel goes off
activating the alarm
door or the bonnet, for example.
and the direction indicators flash for about 2
► Lock the vehicle using the key (built-in the
seconds.
Work on the alarm system
remote control) in the driver's door lock.
Consult a PEUGEOT dealer or a
If the vehicle automatically locks itself
qualified workshop.
again (as happens if a door is not
Malfunction
opened within 30 seconds of unlocking), the
When the ignition is switched on, fixed
monitoring system is automatically
illumination of the indicator lamp on the
Locking the vehicle with
reactivated.
instrument panel indicates a system malfunction.
alarm system
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Triggering of the alarm
Activation
This is indicated by sounding of the siren
Automatic activation
► Switch off the ignition and exit the vehicle.
and flashing of the direction indicators for 25
► Lock the vehicle using the remote control or
(Depending on version)
seconds.
with the Keyless Entry and Start system.
The system is activated automatically 2 minutes
The flashing of the direction indicators and of
When the monitoring system is active,
after the last door is closed.
the alarm warning lamp on the instrument panel
this indicator lamp flashes once per
► To avoid triggering the alarm on entering the
indicate that the alarm was triggered during your
second on the instrument panel and the direction
vehicle, first press the unlocking button on the
absence. When the vehicle is unlocked using
indicators flash for about 2 seconds.
27
Access
remote control or unlock the vehicle using the
2. Right-hand front
If the window meets an obstacle while rising, it
"Keyless Entry and Start" system.
3. Right-hand rear (depending on version)
stops and immediately partially lowers again.
4. Left-hand rear (depending on version)
Deactivating the alarm
Deactivating the rear
5. Deactivation of electric window controls
► Press the remote control unlocking
located by rear and passenger seats
controls for the rear electric
button for about 4 seconds. An audible
(depending on version)
windows
signal is triggered and the direction indicators
flash 4 times to indicate that the alarm is
For your children's safety, press control 5
Manual operation
deactivated (the indicator lamp on the instrument
to deactivate the controls for the rear and
► To open/close the window, press/pull the
passenger electric windows, irrespective of their
panel is deactivated).
switch without passing the point of resistance;
positions.
► Reactivate the alarm by pressing the
the window stops as soon as the switch is
A confirmation message is displayed. The
unlocking button.
released.
message will remain displayed until the controls
are reactivated.
Electric windows
Automatic operation
The rear electric windows can still be controlled
(Depending on version, for driver only)
using the driver's controls.
► To open/close the window, press/pull the
switch past its resistance point: the window
Reinitialising the electric
opens/closes completely when the switch is
windows
released.
After reconnecting the battery, or in the event
Operating the switch again stops the movement
of abnormal window movement, the anti-pinch
of the window.
function must be reinitialised.
Window controls remain operational for
The anti-pinch function is disabled during the
approximately 45 seconds after switching
following sequence of operations.
off the ignition or after locking the vehicle.
For the driver’s window:
After that time, the controls are disabled.
► Raise the window until it is fully closed.
To reactivate them, switch on the ignition or
► Release then pull the control for at least one
unlock the vehicle.
second after the window reaches the closed
position. Repeat the operation twice in a row.
Anti-pinch
► Lower the window fully.
(Depending on version, for driver only)
If an electric window meets an obstacle
1.
Left-hand front
during operation, the movement of the
28
Access
window must be reversed. To do this, press
2
the relevant control.
When the driver operates the passengers’
electric window controls, it is important to
ensure that nothing can prevent the window
from closing properly.
It is important to ensure that passengers use
the electric windows correctly.
Pay particular attention to children when
operating the windows.
Be aware of passengers and/or other persons
present when closing windows remotely using
the electronic key.
Do not put your head or arms through the
open windows when the vehicle is moving -
risk of serious injury!
29
Ease of use and comfort
Adjusting the angle
Correct driving position
Front seats
(Depending on equipment)
For safety reasons, adjustments must
► Move the upper part of the head restraint
Front head restraints
only be made when the vehicle is
forwards or backwards to adjust the angle.
stationary.
Adjusting the height
Removing a head restraint
Before taking to the road and to make the most
► Pull the head restraint fully up.
of the ergonomic layout of the instruments and
► Press lug A to release the head restraint and
controls, carry out these adjustments in the
raise it fully.
following order:
► Stow the head restraint securely.
- head restraint height.
- seat backrest angle.
Refitting a head restraint
- seat cushion height.
► Insert the head restraint rods into the guides
- longitudinal seat position.
in the corresponding seat backrest.
- steering wheel height and reach.
► Push the head restraint fully down.
- rear view mirror and door mirrors.
► Press the lug A to release the head restraint
and push it down.
► Adjust the height of the head restraint.
Never drive with the head restraints
removed; they should be in place and
adjusted for the occupant of the seat.
Upwards:
Manually-adjustable seats
► Pull the head restraint up to the desired
position; you can feel the head restraint clicking
Longitudinal
into position.
Once these adjustments have been
Downwards:
made, check that the instrument panel
► Press lug A to lower the head restraint.
can be viewed correctly from your driving
The head restraint is correctly adjusted
position.
when its upper edge is level with the top
of the occupant's head.
30
Ease of use and comfort
► Raise the control bar and slide the seat
Electrically-adjustable seats
► Tilt the rear of the control upwards or
3
forwards or backwards.
downwards to obtain the required height and
► Release the control bar to lock the seat in
Longitudinal
angle.
position on one of the notches.
Electric lumbar adjustment
Backrest angle
(driver only)
► Push the control forwards or backwards to
slide the seat.
► Pull the control all the way up and tilt the
Backrest angle
► Press and hold the front or rear of the
backrest forwards or backwards to adjust it.
control to increase or reduce the lumbar
Height
support.
(driver only)
2-seat front bench seat
It includes 2 fixed cushions with 2 independent
backrests (adjustable and foldable in the table
► Tilt the control forwards or rearwards.
position).
Cushion height and angle
The backrest of the seat located next to the
driver, once in the table position, can also be
(driver only)
used as an armrest and has 2 cup/can holders
► Pull the control upwards to raise or push it
and a support strap.
downwards to lower, until you obtain the position
required.
For more information on the Seat belts,
refer to the corresponding section.
31
Ease of use and comfort
Folding the backrests
► Straighten the backrest 2 or 3 and push it
firmly to engage its locking system.
The backrests must only be operated
► Check that the release strap 1 has correctly
with the vehicle stationary.
returned to its position.
While driving, having a passenger in the rear,
► Check that the central seat belt is not trapped
behind the front benchseat is prohibited if the
during the manoeuvre.
benchseat backrests are tilted.
Please note: an incorrectly latched
When sharp deceleration occurs, objects
backrest compromises the safety of
placed on the folded backrest can turn into
passengers in the event of sudden braking or
projectiles.
an accident.
Preliminary operations:
► Firmly pull one of the straps 1 to release the
► Lower the head restraints.
desired backrest.
Backrest angle
► Check that no person or object will interfere
► Guide the backrest 2 or 3 down to the
Several adjustment positions are possible.
with folding down the backrests (clothing,
horizontal position.
► Pull the strap 1 forwards, then tilt the
luggage, etc.).
The maximum load distributed over the
corresponding backrest forwards to the desired
► Check that the outer seat belt is properly
backrests, in the table position, is 75 kg.
position.
tensioned along the pillars, the central belt is
A heavier load could damage the backrest
stowed and the tongues of the belts are correctly
frames.
in the stowed position.
Steering wheel
Deactivation of the front passenger
adjustment
Repositioning the backrests
airbag is recommended.
32
Ease of use and comfort
► When stationary, pull control A to release the
Electric adjustment
3
steering wheel.
► Adjust the height and reach to suit your
driving position.
► Push the control to lock the steering wheel.
For safety reasons, these adjustments
must only be carried out with the vehicle
► Press control C.
stationary.
Lock the vehicle from the outside.
Electric unfolding
Mirrors
► From outside: unlock the vehicle.
► Move control A to the right or to the left to
► From inside: with the ignition on, press
Door mirrors
control C.
select the corresponding mirror.
► Move control B in any of the four directions
As a safety measure, the mirrors should
Demisting/Defrosting
to adjust.
be adjusted to reduce the "blind spots".
► Return control A to its central position.
Depending on version, the demisting/
The objects that you see in the mirrors are
defrosting of the door mirrors works with
in fact closer than they appear. Take this
Manual folding
the demisting/defrosting of the rear screen.
into account in order to correctly judge the
The mirrors can be folded manually (parking
For more information on Rear screen
distance of vehicles approaching from behind.
obstruction, narrow garage, etc.).
demisting/defrosting, refer to the
► Turn the mirror towards the vehicle.
corresponding section.
Manual adjustment
Electric folding
Interior rear view mirror
► Directly manouevre the mirror glass to adjust
the mirror concerned.
Depending on equipment, the mirrors can be
Equipped with an anti-dazzle system, which
folded electrically from the inside, with the
darkens the mirror glass and reduces the
vehicle parked and the ignition on.
nuisance to the driver caused by the sun,
headlamps of other vehicles, etc.
Manual model
Day/night position
33
Ease of use and comfort
High position (use):
First steps:
► Pull the head restraint fully up.
► Lower the head restraints.
Low position (stowing; when the seats are not
► If necessary, move the front seats forward.
in use):
► Check that no person or object might interfere
► Press the lug A to release the head restraint
with the folding of the backrests (e.g. clothing,
and push it down.
luggage).
The rear head restraints can be removed.
► Check that the seat belts are free, not
► Pull the lever to change to the anti-dazzle
Removing a head restraint
engaged in the buckles. Release them so that
"night" position.
the backrest can be moved.
► Push the lever to change to the normal "day"
► Pull the head restraint fully up.
position.
► Press the lug A to release the head restraint
Adjustment
and remove it completely.
► Adjust the mirror to the normal "day" position.
► Store the head restraint.
Refitting a head restraint
Rear bench seat
► Insert the head restraint rods into the guides
in the corresponding seat backrest.
► Push the head restraint down as far as it will
go.
► Press the lug A to release the head restraint
Bench seat with folding cushions (giving access
and push it fully down.
► Pull the strap 1 firmly to release the backrest.
to storage compartments) and split folding
Never drive with passengers seated at
► Guide the backrest 2 down to the horizontal
backrests (2/3-1/3).
the rear when the head restraints are
position.
Rear head restraints
removed; the head restraints should be in
The maximum load distributed over the
place and in the high position.
backrests is 100 kg. A heavier load could
The head restraint for the centre seat
damage the backrest frames.
and those for the outer seats are not
interchangeable.
Repositioning the backrests
Folding the backrests
First check that the outer seat belts are
lying vertically flat alongside the backrest
Manoeuvring the backrests should only
latching rings.
be done when the vehicle is stationary.
34
Ease of use and comfort
► Check that no person or object could interfere
3
with the tilting of the seat cushions (clothing,
luggage, etc.).
► Check that the seat belts are free, not
engaged in the buckles.
► Attach hook 3 of strap 1 onto the head
restraint rod.
► Put the backrest 2 in the upright position and
Under-seat storage boxes
push it firmly to latch it home.
Storage boxes are accessible under the
► Check that the release strap 1 has correctly
cushions of the rear bench seat.
returned to its position.
► Ensure that the outer seat belts were not
► Take strap 1 out of the case (located under
trapped during the operation.
the seat cushion) and pull it firmly to release the
Please note: an incorrectly latched
seat cushion.
backrest compromises the safety of
► Tilt the seat cushion 2 to the vertical position
passengers in the event of sudden braking or
(against the backrest).
an accident.
Tilting the seat cushions
Manoeuvring the seat cushions must
only be done with the vehicle stationary.
First steps:
► With the cushion raised, lift the carpet to
► If necessary, move the front seats forward.
access the storage compartments and the tool
kit (depending on version).
35
Ease of use and comfort
For more information on the Tool kit,
Heating and Ventilation
6. Air outlets to the rear footwells (depending on
refer to the corresponding section.
version)
Air intake
7. Adjustable and closable air vents, with blower
The air circulating in the passenger compartment
(depending on version)
Repositioning the seat
is filtered and originates either from the
cushions
exterior, via the grille located at the base of the
Advice
windscreen, or from the inside in air recirculation
Before lowering the seat cushion to the
mode.
Using the ventilation and air
normal position, make sure that you take
Controls
conditioning system
the seat belt buckle and hold it during the
► To ensure that air is distributed evenly,
operation.
The controls are grouped together on the centre
keep the external air intake grilles at the base
console panel.
of the windscreen, the nozzles, the vents, the
Air distribution
air outlets and the air extractor in the boot
free from obstructions.
► Do not cover the sunshine sensor located
on the dashboard; this sensor is used to
regulate the automatic air conditioning
system.
► Operate the air conditioning system for at
least 5 to 10 minutes once or twice a month to
keep it in good working order.
► If the system does not produce cold air,
switch it off and contact a PEUGEOT dealer
► Remove hook 3 from the head restraint rod.
or a qualified workshop.
► Guide seat cushion 2 to the horizontal
When towing a large load on a steep gradient
position and push it firmly to lock it.
in high temperatures, switching off the air
► Check that the release strap 1 has correctly
returned to its position, then store it in its case.
conditioning increases the available engine
1.
Windscreen demisting/de-icing vents
► Check that the seat belt buckles did not slip
power, enhancing the towing capacity.
2.
Front side window demisting/de-icing vents
under the seat cushions during the manoeuvre.
3.
Adjustable and closable side air vents
Avoid driving for too long with the
4.
Adjustable and closable central air vents
ventilation off or with prolonged operation
5.
Air outlets to the front footwells
36
Ease of use and comfort
of interior air recirculation. Risk of misting and
Heating
Air flow
3
deterioration of the air quality!
► Turn the thumbwheel 2 to obtain a sufficient
air flow to ensure your comfort.
If the interior temperature is very high
If the air flow control is in
after the vehicle has stood for a long
the minimum position (system
time in the sunshine, air the passenger
deactivated), the temperature in the vehicle
compartment for a few moments.
will no longer be controlled. A slight flow of air
Put the air flow control at a setting high
Manual air conditioning
can still be felt, due to the forward movement
enough to quickly change the air in the
of the vehicle.
passenger compartment.
Condensation created by the air
Air distribution
conditioning results in a discharge of
► Press one of the buttons 3 to direct the air
water underneath the vehicle. This is perfectly
1. Temperature.
flow in turn towards:
normal.
2. Air flow/System switch-off.
- windscreen, side windows and footwells,
3. Air distribution.
- central and side vents,
Servicing the ventilation and air
4. Interior air recirculation.
- footwells,
conditioning system
5. Front demisting/de-icing on/off.
- central vents, side vents and footwells.
► Ensure that the passenger compartment
6. Demisting/de-icing of rear screen and door
The air distribution can be adapted by combining
filter is in good condition and have the filter
mirrors on/off (depending on version).
the corresponding buttons.
elements replaced regularly.
7. Air conditioning on/off.
We recommend using a composite passenger
8. Maximum air conditioning.
Air conditioning on/off
compartment filter. Its specific active additive
The air conditioning system is designed to
The air conditioning system only operates with
helps protect against polluting gases and bad
operate effectively in all seasons, with the
the engine running.
smells.
windows closed:
► To ensure correct operation of the
- It lowers the temperature in summer.
Temperature
air conditioning system, have it checked
- It increases the effectiveness of the demisting,
► Turn the thumbwheel 1 from "Blue" (cold)
according to the recommendations in the
in winter, above 3°C.
to "Red" (hot) to adjust the temperature to your
Manufacturer’s service schedule.
► Press button 7 to activate/deactivate the air
requirements.
conditioning system.
37
Ease of use and comfort
Air conditioning does not operate when
5. Visibility programme.
- windscreen, side windows and footwells,
the air flow is deactivated.
6. Demisting/de-icing of rear screen and door
- footwells,
To obtain cool air more quickly, enable interior
mirrors on/off (depending on version).
- central vents, side vents and footwells,
air recirculation for a brief period. Then return
7. Air conditioning on/off.
- windscreen, side windows, central vents, side
to the intake of exterior air.
8. Maximum air conditioning.
vents and footwells,
Switching off the air conditioning may result in
9. System switch-off.
- central and side vents,
some discomfort (humidity or misting).
10. Automatic comfort mode.
- windscreen and side windows (demisting or
11. "Dual" function.
defrosting).
Maximum air conditioning
Air conditioning on/off
The selected settings and the
The system automatically adjusts the
temperature values are displayed in the
The air conditioning system is designed to
temperature setting to the lowest possible, the
upper banner of the touch screen.
operate effectively in all seasons, with the
air distribution towards the central and side air
windows closed:
vents, the air flow to maximum and activates
- It lowers the temperature in summer.
recirculation of interior air.
Temperature
- It increases the effectiveness of the demisting,
► Press button 8 to activate/deactivate the
The driver and front passenger can each set the
in winter, above 3°C.
function (confirmed by the indicator lamp coming
temperature to suit their preferences.
► Press button 7 to activate/deactivate the air
on/going off).
The value shown on the touch screen is a level
conditioning system.
Once the function is deactivated, the system
of comfort, not a temperature in Celsius or
returns to the previous settings.
Air conditioning does not operate when
Fahrenheit.
the air flow is deactivated.
► Turn the thumbwheel 1 from "Blue" (cold)
To obtain cool air more quickly, enable interior
to "Red" (hot) to adjust the temperature to your
Dual-zone automatic air
air recirculation for a brief period. Then return
requirements.
conditioning
to the intake of exterior air.
Switching off the air conditioning may result in
Air flow
some discomfort (humidity or misting).
► Press the buttons 2 to increase/decrease the
air flow.
The air flow symbol (a fan) appears. It is filled in
Automatic Comfort
or emptied gradually, according to the value set.
1. Temperature.
programme
2. Air flow.
► Press button 10 to activate or deactivate the
Air distribution
3. Air distribution.
air conditioning system’s automatic mode.
► Press button 3 to direct the air flow in turn
4. Interior air recirculation.
towards:
38
Ease of use and comfort
When the indicator lamp in the button is on, the
The system automatically manages the air
Interior air recirculation
3
air conditioning system operates automatically:
conditioning, air flow and air intake, and provides
The intake of exterior air prevents the formation
the system manages the temperature, air
optimum distribution towards the windscreen and
of mist on the windscreen and side windows.
flow and air distribution in the passenger
side windows.
Recirculating the interior air isolates the
compartment in an optimum way according to
► Press the "visibility" button 5 again to stop
passenger compartment from outside odours
the selected comfort level.
the programme.
and fumes and allows the desired passenger
Or
In cold weather with the engine cold, the
compartment temperature to be achieved more
► Press the "AUTO" button 10 to return to the
air flow is increased gradually until the
rapidly.
automatic comfort programme.
comfort setting has been reached, in order to
► Press this button to activate/deactivate
limit the delivery of cold air into the passenger
the function (confirmed by the
"Dual” function
compartment.
illumination/extinction of the indicator lamp).
The comfort setting for the passenger side
On entering the vehicle, if the interior
can be indexed to the driver's comfort setting
This function is activated automatically
temperature is much colder or warmer than
(mono-zone).
when reverse gear is engaged.
the comfort setting requested, there is no
► Press the corresponding button 11 to
need to alter the value displayed to more
activate/deactivate the function.
quickly reach the required level of comfort.
The indicator lamp in the button comes on when
The system automatically corrects the
Switching off the air
the function is activated.
temperature difference as quickly as possible.
The function is deactivated automatically if a
conditioning system
passenger uses the temperature control.
With heating or manual air conditioning
Manual mode
Maximum air conditioning
- Adjust the air flow to the minimum setting,
It is possible to make a different choice from that
"OFF" position.
offered by the system by changing a setting.
The system automatically adjusts the
The other functions will still be automatically
temperature setting to the lowest possible, the
With automatic dual-zone air conditioning
managed.
air distribution towards the central and side air
► Press this button.
The indicator lamp in the "AUTO” button goes
vents, the air flow to maximum and activates
out if you change a setting.
recirculation of interior air.
This action deactivates all of the functions of the
► Press button 8 to activate/deactivate the
air conditioning system.
Visibility programme
function (confirmed by the indicator lamp coming
The temperature is no longer regulated. A slight
► Press the "visibility" button 5 to demist or
on/going off).
flow of air can still be felt, due to the forward
de-ice the windscreen and side windows more
Once the function is deactivated, the system
movement of the vehicle.
quickly.
returns to the previous settings.
39
Ease of use and comfort
It is possible to manually change the air flow
Front demisting/defrosting
Front fittings
without deactivating the automatic Visibility
programme.
With heating or manual air
In wintry conditions, before moving off, it
conditioning
is essential to remove any snow or ice
► Adjust the temperature to maximum (red).
from the windscreen around the sensor.
► Adjust the air flow to maximum.
Otherwise, the operation of equipment which
► Press this button to activate the air
uses the sensor may be affected.
distribution to the "Windscreen" position;
its indicator lamp comes on.
► Check that the recirculation of interior air is
Rear screen demisting/
deactivated; its indicator lamp must be off.
► Depending on version, switch on the air
defrosting
conditioning by pressing the "A/C" button; its
This demisting/de-icing only works with the
indicator lamp comes on.
engine running.
Depending on version, it also demists/de-ices
With automatic dual-zone
the door mirrors.
air conditioning
► Press this button to activate/deactivate
the function (confirmed by the indicator
Automatic Visibility programme
lamp coming on/switching off).
This mode allows the windscreen and side
Demisting/defrosting switches off automatically
windows to be demisted or defrosted as quickly
to prevent an excessive consumption of
as possible.
electrical current.
► Press this button to activate/deactivate
Switch off demisting/defrosting when
the mode (confirmed by the illumination/
1.
Grab handle
you no longer need it; reducing
extinction of the indicator lamp).
2.
Sun visor
electrical consumption in turn decreases
The programme automatically manages the air
3.
Boarding assistance handle
energy consumption.
conditioning (depending on version), air flow
4.
Glasses holder
and air intake, and provides optimum distribution
5.
Illuminated glove box with refrigeration
towards the windscreen and side windows.
(depending on version)
6.
Door pockets
40
Ease of use and comfort
7. Retractable cup holder (press on it to
Never drive with the glove box open
USB socket(s)
3
release)
when a passenger is at the front. It may
8. USB socket and USB charger socket
cause injury during sharp deceleration!
9. Cigarette lighter/12 V (120 W) accessory
socket
Cigarette lighter/12 V
10. Storage compartment
11. Card holder
accessory socket(s)
12. Cup holder and storage compartment
13. Front armrest with storage (depending on
version)
Ensure the retractable cup holder 7 is
clean before putting it back in its housing
- risk of jamming the mechanism.
Make sure you do not leave any item in
the passenger compartment which could
► To use the cigarette lighter, press it in and
Sockets 1, 2 and 3 (depending on version) can
act like a magnifying glass under the effect of
wait a few seconds until it pops out automatically.
be used to charge a portable device.
the sun's rays and cause a fire - risk of fire or
► To use a 12 V accessory (max. power:
Socket 1 also enables audio files sent to your
damage to interior surfaces!
120 W), remove the cigarette lighter and connect
audio system to be played through the vehicle's
a suitable adaptor.
speakers.
You can use this socket to connect a telephone
These files can be managed using the steering-
Glove box
charger, a bottle warmer, etc.
mounted controls or those on the touch screen.
► To open the glove box, lift the handle.
After use, put the cigarette lighter back into place
Depending on version,
With the ignition on, the glove box is lit when
straight away.
socket 1 also allows a
open.
smartphone to be connected by MirrorLinkTM,
Depending on version, it contains an adjustable
The connection of an electrical device
Android Auto® or CarPlay®, enabling certain
ventilation nozzle, distributing the same
not approved by PEUGEOT, such as a
smartphone applications to be used on the touch
conditioned air as the vents in the passenger
USB charger, may adversely affect the
screen.
compartment.
operation of vehicle electrical systems,
For best results, use a cable made or approved
causing faults such as poor radio reception or
by the device manufacturer.
interference with displays in the screens.
41
Ease of use and comfort
These applications can be managed using the
Closing
To avoid any risk of jamming the pedals:
steering-mounted controls or the audio system
► Close the cover until it locks.
- Only use mats which are suited to the
controls.
fixings already present in the vehicle; these
Mats
fixings must be used.
When the USB socket is used, the
- Never fit one mat on top of another.
portable device charges automatically.
Fitting
The use of mats not approved by PEUGEOT
For more information about how to use this
may interfere with access to the pedals and
equipment, refer to the sections describing
hinder the operation of the cruise control/
the audio and telematics systems.
speed limiter.
The approved mats have two fasteners
Front armrest
located underneath the seat.
(Depending on version)
It includes a storage space.
Courtesy lamps
Opening
When fitting it on the driver's side, only use
the mountings present on the carpet (a "click"
indicates proper locking).
The other mats are simply laid over the carpet.
Removing/refitting
1. Front courtesy lamp
► To access the closed storage compartment,
► To remove it on the driver's side, move the
2. Front reading lamps
lift the lever to open the lid.
seat backwards and unclip the fasteners.
► To refit it, position the mat and secure it by
This storage compartment can be used
pressing down.
to house portable devices (mobile phone,
► Check that the mat is secured correctly.
MP3 player, etc.) which can be connected to
the USB/Jack sockets or charged from the 12
V accessories socket in the centre console.
42
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст