Alfa Romeo Stelvio (2022 year). Manual in english — page 18

287

288

04026S0981EM

289

04026S0993EM

USB socket (battery charger)

The glove compartment underneath the

front armrest also contains a third USB

socket 3 fig. 289 for use as a "battery

charger" only.

AUX SOURCE

To activate AUX mode, insert an

appropriate device in the AUX socket 1
fig. 290 on the car.
When a device is connected to that

socket, the system starts reproducing

the connected AUX source, if it is already

playing.

290

04026S0982EM

CLIMATE CONTROL SYSTEM

The Connect system lets you interact

with the automatic dual-zone

climate control system to adjust the

temperature inside the passenger

compartment.
NOTE The climate control widget is only

active via the touchscreen function.
The climate control widget in the Main

Menu can display two different contents:
"Air distribution" fig. 291 and "Comfort"

(present only in case of heated electric

seats and heated electric steering

wheel).

Scroll up/down on the widget

you can

change the display.

Pressing the widget

to activate the "Air

Distribution" or "Comfort" screen.

291

12126S0970EM

On the climate control system widget
is displayed a single graphic button

(activated only using the touchscreen

function) which, if pressed, allows you to

turn off the automatic dial-zone climate

control system and then turn it back on

in its last active configuration before

turning off.

"AIR DISTRIBUTION" SCREEN

The "Air Distribution" menu can be used

to adjust the air temperature on driver

and passenger side.
Graphic buttons are present on the

screen for activating the same functions

which can be selected using the buttons

on the display of the automatic dual-zone

climate control system located in the

passenger compartment (see "Climate

control system" paragraph in the

"Knowing your car" chapter).

MULTIMEDIA

288

"COMFORT" SCREEN

(where provided)
The "Comfort" screen can be used

to adjust the heating level of driver

and passenger seat and of the steering

wheel.

PHONE MODE

NOTE Some "TELEPHONE" mode

functions can be activated in addition

to using the Rotary Pad and/or the

touchscreen function, also using voice

controls: for more information, see

the "Phone voice controls" paragraph

in the "Voice controls" section in this

publication.

INDICATIONS ON THE DISPLAY

The “PHONE” mode widget appears on

the main menu.
The widget display vary according to the

following conditions:

Paired mobile phone
No paired mobile phone
Phone call in progress
Multiple phone call in progress
Outgoing telephone call
Phone conference in progress

Paired mobile phone

If you have already paired your mobile

phone (see the following pages), the
following three graphic buttons fig. 292

will appear on the "PHONE" widget:

Turn the microphone on/off during

a phone call (1);

End call (2);
Transfer call to device (3).

292

12126V0417EM

PAIRING A MOBILE PHONE

Pairing procedure

To pair the mobile phone, proceed as

follows:

activate the

Bluetooth

® function on

the device;

in the main menu, select the

“SETTINGS” function by turning and

pressing the Rotary Pad;

select “Infotainment”;
select the

Bluetooth

® device;

select "Add device";
search for the Connect system on the

Bluetooth

® audio device (during the

pairing stage a screen will appear on

the display showing the progress of the

operation);

select the device to be paired;
when requested by the device, enter

the PIN code shown on the system

display or confirm the PIN displayed on

the device;

if the pairing procedure is completed

successfully, a screen is displayed;

the

Bluetooth

® function can also be

activated by pressing the

"PHONE"

or "MEDIA" functions, which can be

selected from the main menu.
WARNING Perform the telephone pairing

operation only while the car is stationary

and in safe conditions. Only do this with

the car stationary and in safe conditions.

The feature is disabled when the car is

moving faster than 5 km/h.
WARNING If the

Bluetooth

® connection

between mobile phone and system is lost

consult the mobile phone handbook.

289

MAKING A PHONE CALL

With the "PHONE" function on, you can

make a call in the following ways:

by selecting "Phone Book" on the

display or "Recent Calls" and then

selecting a contact from the suggested

list;
or

by selecting "Dial" item on the display.

MAIN PHONE MENU

When a mobile phone is connected to

the Connect system, various items (if

available) will appear on the main menu
fig. 293:

network signal intensity;
mobile phone battery charge;
mobile phone name.

293

12126S0421EM

The other information shown on the

display is:

"Dial" (1 fig. 293): press this graphic

button to show the "dial number" screen

on the display which can be used to dial

the telephone.

"Recent calls" (2 fig. fig. 293): press

this graphic button to choose between

"All Calls" and "Missed Calls".

"Favourites" (3 fig. fig. 293):

press this graphic button you can

choose between "Edit favourites", "Add

favourites", "Reorder favourites" and

"Delete favourites".

"SMS" (4 fig. fig. 293): press this

graphic button to receive and send text

messages (if supported by the device).

The car must be stationary to read the

messages. The listening function and

the sending of default messages which

can be customised by the driver is

always possible. If an unread message is

present, it is indicated by a dot next to

the "SMS" graphic button (a maximum

of 99 unread text messages can be

present).

"Contacts" (5 fig. fig. 293): press

this graphic button on the display to

show the list of all contacts registered

on the phone. When you select a contact,

the phone number and the photo (if any)

linked to the contact appear on the right

of the display.

NAVIGATION MODE

(where provided)

LEGAL/ SAFETY NOTICE

When Connect is used for the first time,

after resetting the default settings

and having changed the language,

the system will ask you to accept a

safety/legal notice, warning you about

the responsibilities involved in the

product use while navigating.
NOTE Some "NAVIGATION" mode

functions can be activated in addition

to using the Rotary Pad and/or the

touchscreen function, also using voice

controls: for more information, see

the "Navigation controls" paragraph

in the "Voice controls" section in this

publication.

NAVIGATION ACTIVATION

The “NAVIGATION” mode widget fig. 294

appears on the main menu.
NOTE The widget is only active using the

touchscreen function.
The graphic button on the widget varies

depending on whether navigation has
been activated

or is not activated .

MULTIMEDIA

290

294

12126S2010EM

SETTING A DESTINATION

The following data are required to set a

destination:

"City/Post code": enter the name

or ZIP code of the city of the new

destination arrival point;

"Address": enter the street name of

the new destination;

"House Number": enter the house

number of the new destination;

"State" (where applicable/necessary):

enter the name of the state of the new

destination arrival point.

"Start Navigation": select the desired

destination using the right side of the

display. This will provide access to the

route planning screen to start navigating.
NOTE The data above can be order

entered in any order ("Free Text Search"

function).
To set a new destination, select

the graphic button

(using the

"touchscreen" function or by rotating

the Rotary Pad): the graphic keyboard

for entering the destination address will

appear on the display and the list of

"Destinations" will appear on the right

side.

Management of voice recognition for

entering navigation addresses

Pressing the button

on the right

side of the steering wheel to start the

voice recognition session and send the

necessary commands to the Connect

system to enter a navigation address.
You can enter addresses in two different

ways:

One-shot

: Say "Navigate to <City,

Address, House Number>" after pressing
the button

on the right side of the

steering wheel and starting the voice

recognition session. The Connect system

will be able to recognise the address

you inserted or display a list of possible

alternatives. Then follow the instructions

provided by the Connect system to start

route calculation.

Manual entry

: The Connect system will

help you entry individual fields through a

guided procedure, with the possibility of

using the "City", "Address" and "House

Number" voice commands. To activate

this mode, press the button

located

on the right side of the steering wheel

and starting the voice recognition

session, send the first command to

enter the city and continue following the

instructions provided by the Connect

system.
If a language change is made on the

Connect system, using the dedicated

menu in the "Settings" on the display, a

pop-up screen will appear informing the

driver of the limited availability of the

voice recognition functions.
If you choose the English language on a

car sold in Italy the following message

will appear on the display of the Connect

system: "When the vocal system is set

to English you can input addresses

in the United Kingdom, Ireland, Malta

and Gibraltar. You can also insert all

destinations manually.".
WARNING The above message is located

according to the country of destination

of the vehicle. Only the countries shown

on this pop-up screen will be available

with voice recognition functions for

address and destination selection. The

available countries will change according

to the language type selected by the

driver.
NOTE The "one-shot" address entry

mode will not be available if the driver

chooses a language other than the one

used in the country in which the car was

marketed. In this case, in order to access

the voice recognition functions and enter

a valid address, i.e. recognisable by the

291

Connect system, you will need to send to

the Connect system a voice command to

change country in advance (for each use

of the car). For example, if you choose

English language on a car sold in Italy,

you will need to use the voice command

"Change country" to start the address

entry procedure.

STOPPING NAVIGATION

After starting the navigation, it can be

stopped at any moment.
To deactivate navigation, press the
graphic button

The display will show a dedicated

message. Select “Confirm” to confirm

the choice, or “Cancel” to cancel the

operation.
If “Confirm” is selected, the display will

return to the main navigation screen.

Tom Tom® ONLINE SERVICES

(where provided)
Tom Tom® "Online Services" (where

provided) allow you to receive the

following information and view on the

Connect system display:

"Live Traffic"/"Speed Cameras";
"Send Destination to car";
"Search for a point of interest (POI)

online"

"Last Mile Navigation".

NOTE Tom Tom® online services are

available if Connected Services - Alfa

Connect Services is activated and for the

entire duration, plus any renewals, of the

"My Navigation" package.

LIVE TRAFFIC / SPEED CAMERAS

(where provided)
With this service you can view the

relevant information on the display of

the Connect system:

traffic (conditions updated in real-

time);

the presence of speed cameras (if any).

Live Traffic

With this service, you can monitor, the

traffic conditions in real-time on the

display of the Connect system. The

information is displayed by means of

special icons with the following colours
fig. 295:

GREEN

: Roads where the average

traffic speed corresponds to the

expected free flow speed;

YELLOW

: Roads where the average

speed is below the indicated road speed

limit;

RED

: Roads where the average speed

is close to blocked traffic conditions;

RED + DANGER SIGN

: Roads blocked,

due to the presence of construction

sites, accidents, etc.

295

12126S2300EM

Speed Cameras

(where provided)

With this service, you can see on the

MULTIMEDIA

292

display the type (fixed or mobile) and

location of the speed cameras.
The display shows a speed camera icon

on the right-hand side.
If you press on the icon on the display

you will see a screen with the following

information about the speed cameras
fig. 296:

"Position" (e.g. "Both sides");
"Report Now."

296

12126S2132EM

Send Destination to car

Using this service, you can navigate to a

second destination sent to Connect via

your smartphone.
The new destination will appear in

the lower area of the display; to start

navigation, press the "Start Navigation"
graphic button fig. 297:

with destination NOT set

: the new

destination will be displayed in the

"Recent Destinations" menu;

with destination set

: the new

destination will be displayed in the

"Manage Route" menu. To access the

new destination press the "Add New

Destination" graphic button.

297

12126S2135EM

SEARCH FOR A POINT OF INTEREST

(POI) ONLINE

Using this service, you can enter a

destination (by entering the name,

address or a POI) and a list of POIs that

match your search will appear on the

display.
NOTE A subscription and authorisation is

needed to use this service.

LAST MILE NAVIGATION

With this service you can transfer

navigation from the Connect system to

your smartphone.
When navigation is active, the Connect

system will transfer navigation to your

smartphone as follows:

automatically

by activating the

"Automatic sending Last Mile to mobile"

option in the "Settings" menu;

at the driver's request

by activating

the "Send Last Mile Navigation" option

in the "Manage Route" menu or in the

"Settings" menu;

at the driver's request

if, during

navigation, you touch a point on the Map

and then select the "Send Last Mile

Navigation" option on the pop-up menu

that appears on the display.

Transferring Navigation to your

smartphone

With active navigation, proceed as

follows:

press the graphic button

("Manage

Route"): the "Manage Route" menu will

appear on the display;

select the "Last Mile Navigation" item;
select the "Send Now Last Mile

Navigation" item: the display will show a

dedicated message indicating that the

navigation will be transferred to the

smartphone. Then press the "OK" graphic

button to confirm the selection.
NOTE The final destination will be sent

to the smartphone even if the car is not

in a 1 kilometre (or 1 mile) radius from the

final destination.
NOTE The transfer to the smartphone

will take place even if you have not

enabled the "Automatic sending Last

293

Mile to mobile" feature in the "Settings"

menu (the navigation will be transferred

by selecting the "Send Last Mile

Navigation" option ).

SETTINGS

ACTIVATING THE SETTINGS MENU

The "Settings" menu can be activated by

using the appropriate widget on the main
menu fig. 298.
The following items are available in the

menu:

"Lights"
"Units & Language"
"Clock and Date"
"Passive Safety"
"Convenience & Comfort"
"Doors & Locks"
"Instrument panel"
"Infotainment"
"System"

Climate

Air distribution

Vehicle informatio

n

Settings

24°C

ext.

22

.5

°C

22

.5

°c

km

days

298

12126V2000EM

Lights

The following settings can be modified

when this mode is selected:

"Headlight Sensor"
"Follow Me"
"Cornering Lights"
"Flash Lights with Lock"
"Daytime Running Lights"
"Courtesy Lights"
"Interior Ambient Lighting"
"Restore Settings"

Units & Language

The following settings can be modified

when this mode is selected:

"Units"
"Language"
"Restore Settings"

Clock and Date

The following settings can be modified

when this mode is selected:

"Sync with Gps Time"
"Set Time"
"Set Date"
"Time Format"
"Restore Clock and Date Settings"

Passive safety

The following settings can be modified

when this mode is selected:

"Passenger airbag": this is used to

activate/deactivate the front passenger

airbag function.

When the function is accessed:

the system will detect the

activation/deactivation status of the

airbags and confirm change of status.

Press the Rotary Pad to continue. The

airbag status is visible through the LEDs

next to the status icon on the dashboard.

Passenger protection activated

:

the ON LED switches on with a

steady light.

Passenger protection

deactivated

: the OFF LED switches

on with a steady light.

“Auto Park Brake" (where provided):

allows you to activate/deactivate the

electric park brake engagement when

the engine is stopped.

"Brake service" (where provided):

this can be used to activate ("Yes") or

deactivate ("No") the procedure to effect

brake system maintenance.

"Seat Belt Reminder": this is used to

enable ("OK") or disable ("Cancel") the

acoustic signal for the SBA (Seat Belt

Alert) system.

"Automatic mirror folding"

(where provided): This function

activates/deactivates automatic folding

of the mirrors when the doors are

locked/unlocked. The default setting is

"Off".

MULTIMEDIA

294

“Restore Settings”: allows you to

delete the previously settings from this

menu and restore the default settings.

Convenience & Comfort

The following settings can be modified

when this mode is selected:

“Passive Entry" (where provided):

allows you to activate ("On") or

deactivate ("Off") the automatic door

closing

“Restore Settings”: allows you to

delete the previously settings from this

menu and restore the default settings.

Doors & Locks

The following settings can be modified

when this mode is selected:

"Door lock in motion"
"Unlock all doors on exit"
"Door unlock on entry" (where

provided)

"Sound Horn with Remote Start"

(where provided)

"Sound Horn with lock" (where

provided)

"Auto Relock" (where provided)
"Electric tailgate"
"Automatic tailgate opening"
"Convenience & Comfort"
"Restore Settings"

Instrument panel

The following settings can be modified

when this mode is selected:

"Buzzer volume"
"Trip B"
"Show Phone Info"
"Show Audio Info"
"Show Nav Info"
"Digital speed on all screens"
"Consumption bar"
"Performance pages"
"Custom areas"
"Restore Settings"

Infotainment

The following settings can be modified

when this mode is selected:

"Screen Off"
"Display brightness"
"Audio"
"Home Page"
"Bluetooth®"
"Device Manager"
"Entertainment"
"Phone"
"Projection mode"
"Navigation "(where provided)
"Performance Pages"
"Android Auto"
"Connected Services" (where

provided)

"Driver Assistance"

System

The following settings can be modified

when this mode is selected:

"Auto-On Radio"
"Cam Delay"
"Software Update"
"Map Update"
"Restore All Settings"

MAP UPDATE

(where provided)
To ensure optimal performance (where

provided), the navigation system must be

updated periodically.
For this, the

Mopar® Map Care

service

offers a new map update every three

months.
The updates can be downloaded from the

maps.mopar.eu website and installed

directly on the Connect system. All

updates are free of charge for 3 years

from the start of the warranty on the car.
The navigation system can also be

updated at the Alfa Romeo Dealership.
NOTE The dealer may charge for

updating the navigation system.

Map update procedure

Proceed as follows to update the

navigation maps:

start the engine;

295

with the car stationary, insert the USB

key, containing the updated maps, into

one of the USB ports located on the

central tunnel;

select the "Update Map" option from

within the "Map Update" function. The

display will show a screen with the

version and the duration of the whole

procedure in minutes;

select the "Update" function. The

display will show a screen with the

instructions to be followed and a request

for confirmation;

confirm to start the process.

During the update, the instructions to be

followed will continue to be displayed

together with the process progress. You

can move the car during this phase.

PERFORMANCE

The "Performance pages" can be

activated by using the appropriate
widget on the main menu fig. 299.
The following information is shown on

the main screen of the "Performance

pages":

"Technical gauges"
"Consumption history"
"Efficient Drive"
"Engine torque"
"Temperatures" (Quadrifoglio version

only)

"Drag Race" (Quadrifoglio version only)
"Performance content" (where

provided)
Turn the Rotary Pad to select the desired

item and then press the Rotary Pad to

confirm the selection and access the

menu or, using the touchscreen function,

touch the display to select the desired

item.

299

12126S0400EM

VEHICLE INFORMATION

The "Vehicle Information" function can

be activated by using the appropriate
widget on the Main Menu fig. 300.
The main screen shows information

about:

Service (scheduled servicing)
TPMS (Tyre Pressure Monitoring

System)

Engine oil level
AdBlue® level (only Diesel versions)

(where present)

Alfa DNA™ system

To view the contents of one of the

information on the display, press on the

display (touchscreen function) or turn the

Rotary Pad, select the desired item and

then press the Rotary Pad to confirm

your selection.

Settings

Vehicle Information

Air Distribution

Climate

days

300

12126V0994EM

MULTIMEDIA

296

DRIVER ASSISTANCE

The "Driver Assistance" widget fig. 301 is

located on the main menu of the Connect

system.
The following menus are available in the

"Driver Assistance" widget:

"Safety"
"Comfort"

Select the two menus by sliding on the

widget upwards or downwards with a

finger.

301

12126S0431EM

"SAFETY" MENU

The "Safety" menu displays information

on the following driver assistance

systems:

FCW (Forward Collision Warning)

System

LKA (Lane Keeping Assist) or LDW

(Lane Departure Warning)

ABSA (Active Blind Spot Assist) or

BSM (Blind Spot Monitoring)

DAA (Driver Attention Assist) System

Indications on the display

The driver assistance system status

(activated or deactivated) is shown on

the display by a graphic "shield" next to

the outline of the car.
When ALL driver assistance systems are

ACTIVATED

, the following screen will

appear on the display fig. 302.
When ALL driver assistance systems are

DEACTIVATED

, the following screen will

appear on the display, fig. 301.

302

12126S0438EM

"COMFORT" MENU

The "Comfort" submenu fig. 303 displays

information on the following driver

assistance systems:

ISC (Intelligent Speed Control) System
TSR (Traffic Sign Recognition) System
Speed Limiter
Park Sensors System

Rear View Camera
AHB (Automatic High Beam)

ext.

303

07076S0709EM

Indications on the display

Each driver assistance system is

represented by a corresponding icon on

the display.
The status of the function is displayed

next to the icon: "On" = system activated

/ "Off" = system deactivated.
Settings are possible on some systems

(if activated), (e.g. the speed limit value

can be adjusted on the Speed Limiter

function).

SYSTEM SETTINGS

After viewing the "Driver Assistance"

menu in full screen mode, a list of all

settings that can be made for driver

assistance systems will appear on the

display.
The information shown on the display is

as follows:

system identification icon;

297

system name;
graphic button 1 fig. 304 for activating

("ON") and deactivating ("Off"") the

system;

indication of the function status;
graphic display area of the system;
default system setting (modifiable by

the driver).
The following active driver

assistance/safety systems will not be

available if you have selected the "RACE"

driving mode (Quadrifoglio versions

only). In this case, a dedicated pop-up

screen will appear on the Connect

system display.

304

12126V2096EM

SYSTEM ACTIVATION/DEACTIVATION

Using the touchscreen function

Proceed as follows:

press the display to select the desired

item;

to activate the system, press the

graphic button 1 fig. 304 rightwards: "ON"

will appear on the display

to deactivate the system, press the

graphic button 1 fig. 304 leftwards: "OFF"

will appear on the display.

Using the controls located on the

central tunnel

Proceed as follows:

turn the Rotary Pad and select the

desired item;

press on Rotary Pad to confirm

the choice and activate the system:

the selected item will be activated

automatically. When the system is

activated, press the Rotary Pad to

deactivate it.

Apple CarPlay and Android Auto

(where provided)
The Apple CarPlay and Android Auto

applications allow you to use your

smartphone in the car safely and

intuitively.
To activate them, simply connect a

compatible smartphone to the USB

port and the contents of the phone will

automatically appear on the display

of the Connect system after having

selected the default action the first time

you connect an Android and/or an iOS

device. Use the "Device Manager" menu

to change the choice previously made.
To check the compatibility

of your smartphone, see the

indications on the websites:

https://www.android.com/intl/it_it/auto/

and http://www.apple.com/it/ios/carplay/.
The first time a device is connected, a

pop-up screen appears on the Connect

system display, allowing you to choose

which profile to use it with during

subsequent connections. The possible

options are: “Charge Only”, “Media/iPod”,

“Projection mode”. The options can be

modified by using the "Device Manager"

menu.
If your smartphone is properly connected

to the car via the USB port, an additional

widget and its graphic icon will be

displayed on the Connect System Main

MULTIMEDIA

298

Menu on the left hand side of the status

bar.
To use Apple CarPlay, connect your

iPhone to the car using a MFI (made for

iPhone) certified USB cable.
To use Android Auto, connect your

smartphone to the car using a USB for

Android phones having appropriate

features. Using unsuitable cables may

prevent correct system operation.
NOTE Interaction with the smartphone

may be needed to enable Apple

Carplay/Android Auto and some other

functions. Complete the action on your

device (smartphone) as needed.

APP CONFIGURATION (Apple CarPlay)

Apple CarPlay is compatible with the

iPhone 5 or more recent models, with

the iOS 7.1 operating system or later

versions.
In order to use Siri in Apple CarPlay, you

must activate the function from your

smartphone settings.
To use Apple CarPlay, the smartphone

must be connected to the car by means

of a USB cable.

APP CONFIGURATION (Android Auto)

Before use, download the Android Auto

application to your smartphone from

Google Play Store.
The application is compatible with

Android 5.0 (Lollipop) and later versions.
To use Android Auto, the smartphone

must be connected to the car by means

of a USB cable.

INTERACTION

After the configuration procedure, when

you connect your smartphone to the

USB port on the car, after displaying the

pop-up screen and according to the last

setting made on the "Device Manager"

menu, the application will automatically

start on the Connect system.
The Rotary Pad can be used to select

and confirm the available smartphone

functions.
Multimedia contents on the smartphone

can be accessed directly via "MEDIA"

mode of Connect.

Interaction with voice controls

You can interact with the voice

assistants of Apple CarPlay and Android
Auto using the button

located on the

right side of the steering wheel:

long pressure

will activate interaction

with the voice assistant of Apple (Siri) or

Android (Google Assistant);

short pressure

will initiate interaction

with the native voice system. When

the voice assistant of the phone is

activated, the interface will but that of

the associated telephone not that of the

car. A short press will interrupt both the

native voice session and that of Siri or

Google Assistant.
WARNING If Apple CarPlay and

Android Auto apps are present, Siri

voice assistant (for Apple CarPlay) or

Google Assistant (for Android Auto) will

be activated. In this case you can use

"Natural language" voice controls and

not just the specific ones preset for the

Connect system. The voice assistants

of Siri (for Apple CarPlay) or Google

Assistant (for Android Auto) will only
be activated by holding the button

pressed on the right side of the steering

wheel.

Active Media or Phone mode

The following will be activated according
to how you press the button

on the

right side of the steering wheel:

299

a

short

press of the button

will

activate the voice control related to the

Connect system;

holding

the button

pressed to

activate the voice control for the phone

in "Projection" mode.

Active Tuner (Radio) or Navigation

mode

Briefly pressing the button

on the

right side of the steering wheel on the

Connect system display to activates

the voice control for "Tuner (Radio)" or

"Navigation" mode, also when Apple

CarPlay or Android Auto apps are

activated.

NAVIGATION

With the Apple CarPlay and Android Auto

applications, you can choose to use the

navigation system on your smartphone.
The controls can be imparted directly on

the Connect system.
The user can choose to change their

selection at any time by accessing the

navigation system that they want to use

and setting a new destination.

EXITING FROM THE Apple CarPlay AND

Android Auto APPS

To end the Apple CarPlay or Android

Auto session, physically disconnect the

smartphone from the USB port on the

car.

NOTE The date and time shown on

Connect system display must match

the actual date and time, even after

disconnecting the of the battery.

Adjust it from the "Settings" menu of

Connect system. Any discrepancy

between the date and time on the display

and the actual date and time may be

due to on the malfunction in Apple

CarPlay/Android Auto.

VOICE COMMANDS

221)

WARNING Voice commands are not

available for languages not supported by

the system.
NOTE Voice controls activation is only

possible with the ignition device at ON.

Voice controls will not be active when

the starter is in the OFF position and the

Connect system is on.
NOTE If Apple CarPlay and Android Auto

apps are present, Siri voice assistant

(for Apple CarPlay) or Google Assistant

(for Android Auto) will be activated. In

this case you can use "Natural language"

voice controls and not just the specific

ones preset for the Connect system.

The voice assistants of Siri (for Apple

CarPlay) or Google Assistant (for

Android Auto) will only be activated by
holding the button

pressed on the

right side of the steering wheel.

STARTING A VOICE SESSION

Briefly press

the button

on the

steering wheel once.

INTERRUPTING A VOICE SESSION

At any time during a voice session

(dialogue), you can press and hold the

button to stop and restart the voice

session from scratch and impart a new

command, regardless of the previous

conversation.
For example, if the system is uttering

a voice help message and recognises

the desired command, it may be useful

to stop the help by pressing the button

on the steering wheel and give the

command, so you don't have to wait for

the help messages to end.

DEACTIVATING A VOICE SESSION

With the voice session active,

briefly

press

the button

on steering wheel.

The voice session will automatically

close when a command has been

recognised and no further actions are

required by the driver.
A phone call will also interrupt the voice

session, in order to allow you to answer

and speak normally using the hands-free

function.

RADIO AM/FM/DAB VOICE CONTROLS

The

button activates the following

functions:

Tune to station <XXX>

MULTIMEDIA

300

Tune to station < XXX>
Tune to frequency < XXX>
Tune to frequency < XXX>
Add to favourites
Show available stations
Show list of available stations
Show Favourite Stations
Show the list of favourites stations
FM
AM
DAB
Tuner Commands ("Go to radio")

MEDIA VOICE COMMANDS

The

button activates the following

functions:

Play (or say View) Album
Play (or say View) Artist
Play (or say View) Composer
Play (or say View) Genre
Play (or say View) Playlists
Play (or say View) Song
Play (or say View) All
Shuffle on
Shuffle off
Play Song (or Track)
Play All (or say View All) Albums
Play All (or say View All) Artists
Play All (or say View All) Composers

Play All (or say View All) Genres
Play All (or say View All) Playlists
Change to AUX
Pass to USB 1
Pass to USB 2
Pass to USB 3
Change to AUX
Change Bluetooth®

NOTE These controls are valid on

devices connected to the system via USB
ports and not through the

Bluetooth®

system.

PHONE VOICE COMMANDS

The

button activates the following

functions:

Dial number <XXXXXX>
Call <XXXXXX>
Go (or say Change to phone)
Phone commands
Search contact
Search
Call back
Show missed calls
All Calls
Show contacts
View contacts
Show all messages
Send a message
Send a message to

Read last (or say Read the last)

message

NAVIGATION COMMANDS

(where provided)
The

button activates the following

functions:

Go (or say Drive) Home
Favourite <favourite name>
Navigation commands
Go (or say Change) to Navigation
Set 2D map
Set detailed 3D map
Set overhead view
Add destination
Destination
Stop Navigation
Repeat instructions
Show map
Enter city
Enter nation
Enter country
Enter street
Enter house number
Route preview
Find the closest <point of interest>

NOTE Voice entry of addresses is only

supported in the country in which you are

located and provided that the system

language matches the local language.

For example, if the car is located in

Italy, it will be possible to enter Italian

301

addresses only if the system language is

set to "Italian".

WARNING

221)

Voice controls must always be given in

safe driving conditions, in compliance with

the laws in force in the country where you

are driving.

CONNECTED SERVICES - ALFA

CONNECT SERVICES

(for versions/markets where provided)

222)

Alfa Connected Services enrich

the experience of use of the car by

connecting it to the network.
The services (where provided) allow

you to receive timely assistance in

case of need and emergency, to obtain

information about the conditions of your

car, its location, control it remotely and

to improve the navigation experience

(where provided) through real-time

updates.
You can access the Alfa Connect

Services using a Alfa Connect mobile app

for smartphone, smart watch, web portal

or the Connect system of your car.
The availability of services is subject to a

Alfa Connect Services subscription.

More information on Alfa

Connect Services (applicability,

availability, compatibility,

packages and specifications)

can be found on the website:

https://myalfaconnect.alfaromeo.com/

GENERAL DISCLAIMER

Personal data & privacy

FCA collects, processes and

uses the personal data of the car in

accordance with legal requirements.

More information can be found in the

general conditions of service and on data

protection policies on the Alfa Romeo

official website.

The Customer is solely responsible

for using the services in the car, even

if by other people, and shall inform all

users and occupants of the car about the

services and the functions and limits of

the system.

If the SOS emergency service is

activated, the call will be automatically

routed to a private FCA Call Centre. We

hereby specify that, whenever the SOS

call is referred to the text, it is to be

considered managed by private service

providers

.

Operating prerequisites

To use some of the Alfa Connect

Services you need to register on the

dedicated portal that can be accessed

from the Alfa Romeo official website,

activate and login to your devices.

Alfa Connect Services is not

available in all countries and is subject

to limitations depending on Connect

system type, location and duration of the

services.

The full operation of the Alfa Connect

Services, including SOS calls and

roadside assistance calls (ASSIST), is

subject to mobile network and GPS

geolocation coverage, without which

the proper provision of services is

not guaranteed. Coverage may not be

guaranteed in places such as tunnels,

garages, multi-storey car parks,

mountains.

In case of mobile network overload or

problems related to the power supply

of the car (e.g. low battery), the services

may not be available.

When using the services, customers

shall keep their passwords secret for

strictly personal use and not to disclose

them to third parties.

SERVICES

WARNING Some of the services listed

below may not be available if the car is

left with the engine off for more than

20 days. Start the engine to reactivate

these services.
According on the equipment of the car

and of the country, different services

may be available for different durations.

MULTIMEDIA

302

For further information about your car,

go to the personal page on the official

Alfa Romeo website.
Some of the packages made available to

the customer are:

My Assistant

: Customer care and

safety alert service, which includes:

"SOS emergency call and ASSIST

roadside assistance" (see chapter

"In emergency").

"Vehicle condition report":

information on the status and

condition of the car, notifying

potential maintenance needs to the

customer via periodic e-mails. This

service is provided on condition

that the Customer has previously

provided the FCA network with a

valid e-mail address.

"In-Vehicle Alerts (Basic)": to

receive messages and/or alerts

regarding recall campaigns or

other important messages on the

Connect system display. You can

contact FCA Customer Service for

further information regarding the

messages received.

My Car

: car status monitoring service.

"Driving Warnings": to set alerts

when user-defined parameters

such as speed, time and area are

exceeded, as well as the Valet

Mode feature.

"At-Home Digital Assistant": to

run the main remote commands

from a voice assistant as well as

mobile apps and smartwatches.

My Remote

: this can be used to

manage remote operations (switching

on lights, door lock/unlock, find vehicle,

etc.) from the mobile app and through

compatible voice assistants. It also

allows you to set up Driving Warnings

with notifications, for example, when you

exceed the set area or time.

My Navigation

: connected navigation

service (subject to availability according

to version/market).

My Wi-Fi

: Optional Wi-Fi Hotspot

service. This service provides Internet

access from the car to all devices with

Wi-Fi connection (smartphones, tablets,

laptops) (supported technologies: 3G –

4G). This creates a private Wi-Fi internet

access point in the car. The function,

available only with the ignition device in

ON position or with the engine started

allows the connection of up to eight

devices simultaneously, but not the

direct communication between devices.

The quality of the service offered by the

integrated Wi-Fi Hotspot depends on

the coverage of the mobile operator's

network.
NOTE The hotspot name and password

can only be changed with the ignition

device in the ON position.

My Theft Assistance:

optional service

with app and web notifications in case of

suspected theft attempts and assistance

in case of theft.
You can enrich Alfa Connect Services

experience by purchasing optional

services for which a subscription is

required.
The services can be subscribed to

independently by the customer

from the catalogue of services

available for the car, directly on the

https://myalfaconnect.alfaromeo.com/

website.
NOTE The date and time shown on

Connect system display must match

the actual date and time, even after

disconnecting the of the battery. Adjust

it from the "Settings" menu of Connect

system. Any discrepancy between the

date and time on the display and the

actual date and time may be due to

on the malfunction in the Connected

Services.

DEACTIVATION OF GEOLOCATION

MODE

(for versions/markets where provided)
If you wish to deactivate geolocation

mode, simply do so from the Connect
system fig. 305 (see the "Settings" menu

of the Connect system for more details).
When geolocation mode is deactivated

some of the services on mobile apps and