Alfa Romeo Giulia (2022 year). Manual in english — page 5
77
Symbol
What it means
What to do
DAA SYSTEM ACTIVATION
The symbol appears, together with a message on the
display, in case of activation of the DAA (Drive Attention
Assist) system.
Stop to pause while driving, pulling the car over in safe
conditions.
IMPORTANT
18)
If the symbol
switches on while driving, stop the engine immediately and contact an Alfa Romeo Dealership.
19)
Driving the vehicle with this symbol on may severely damage the transmission, with resulting breakage. The oil may also overheat: contact with
hot engine or with exhaust components at high temperature could cause fires.
Amber symbols
Symbol
What it means
What to do
ENGINE IMMOBILIZER FAILURE / BREAK-IN ATTEMPT
Engine Immobilizer system failure
The symbol appears to report a failure of the Engine
Immobilizer system.
Contact an Alfa Romeo Dealership as soon as possible.
Break-in attempt
The symbol switches on when the ignition device is
moved to ON position, to indicate a possible break-in
attempt detected by the alarm system.
Electronic key not recognised
The symbol switches on when the engine is started and
the electronic key is not recognised by the system.
Alarm system failure
This symbol switches on to report an alarm system
failure.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
78
Symbol
What it means
What to do
FUEL CUT-OFF SYSTEM OPERATION
The symbol switches on in the event of fuel cut-off
system intervention.
For reactivating the fuel cut-off system, refer to the
description in the "Fuel cut-off system" paragraph in the
"In an emergency" chapter. If it is not possible to restore
the fuel supply, contact an Alfa Romeo Dealership.
PARK SENSORS SYSTEM FAILURE
The symbol appears when the system is faulty or not
available.
Contact an Alfa Romeo Dealership to have the system
checked.
POSSIBLE ICE ON ROAD
The symbol turns on when the external temperature is
equal to or below 37.4°F (3°C).
The symbol turns off when the external temperature is
equal to 74.8°F (6°C).
DEGRADED ENGINE OIL (where provided)
The symbol is displayed only for a limited time.
WARNING After the first indication, each time the engine
is started the symbol will continue to switch on as
described above until the oil is changed.
If the symbol flashes, this does not mean that there is
a fault on the car, rather it simply reports that it is now
necessary to change the oil as a result of regular use of
the car. The deterioration of engine oil is accelerated by
using the car for short drives, preventing the engine from
reaching operating temperature.
Contact an Alfa Romeo Dealership as soon as possible.
20)
GLOW PLUG PREHEATING (Diesel versions)
This warning light comes on when the ignition device is
brought to ON and will switch off when the glow plugs
have reached the preset temperature. The engine can be
started as soon as the symbol turns off.
WARNING In mild or high temperature conditions, the
warning light comes on for a very short time only.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
79
Symbol
What it means
What to do
GLOW PLUG PREHEATING FAILURE (Diesel versions)
If the symbol flashes, it indicates a fault in the glow plug
preheating system.
In this case, contact an Alfa Romeo Dealership as soon as
possible.
ENGINE OIL PRESSURE SENSOR FAILURE
The symbol switches on in the event of engine oil level
sensor failure.
Contact an Alfa Romeo Dealership as soon as possible.
ENGINE OIL LEVEL SENSOR FAILURE
The symbol switches on in the event of engine oil level
sensor failure.
Contact an Alfa Romeo Dealership as soon as possible.
FORWARD COLLISION WARNING (FCW) SYSTEM
FAILURE
The symbol appears in the event of failure of the
Forward Collision Warning system.
Contact an Alfa Romeo Dealership as soon as possible.
START&STOP EVO SYSTEM FAILURE
The symbol appears to indicate a Start&Stop Evo
system failure.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
RAIN SENSOR FAILURE
The symbol switches on in the case of failure of the
automatic windscreen wiper.
Contact an Alfa Romeo Dealership as soon as possible.
DUSK SENSOR FAILURE
The symbol switches on in the case of failure of the
automatic low beam alignment.
Contact an Alfa Romeo Dealership as soon as possible.
BLIND SPOT MONITORING SYSTEM FAILURE
The symbol comes on in the event of a Blind Spot
Monitoring system failure.
Contact an Alfa Romeo Dealership as soon as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
80
Symbol
What it means
What to do
FUEL LEVEL SENSOR FAILURE
The symbol switches on in the event of fuel level sensor
failure.
Contact an Alfa Romeo Dealership as soon as possible.
EXTERNAL LIGHTS FAILURE
The symbol switches on to indicate a failure on the
following lights: daytime running lights (DRLs) / parking
lights / trailer direction indicators (where provided) /
trailer lights (where provided) / side lights / direction
indicators / rear fog light / reversing light / brake lights /
number plate lights.
The failure may be caused by a blown bulb, a blown
protection fuse or an interruption of the electrical
connection.
Replace the bulb or the relevant fuse. Contact an Alfa
Romeo Dealership.
KEYLESS START SYSTEM FAILURE
The symbol switches on in the event of Keyless Start
system failure.
Contact an Alfa Romeo Dealership as soon as possible.
FUEL CUT-OFF SYSTEM FAILURE
The symbol switches on in the event of fuel cut-off
system failure.
Contact an Alfa Romeo Dealership as soon as possible.
LANE DEPARTURE WARNING SYSTEM (LDW) FAILURE
The symbol comes on in the event of a failure in the Lane
Departure Warning system.
Contact an Alfa Romeo Dealership as soon as possible.
LANE KEEPING ASSIST (LKA) SYSTEM FAILURE
The symbol comes on in the event of a failure in the Lane
Keeping Assist system.
Contact an Alfa Romeo Dealership as soon as possible.
AUTOMATIC HIGH BEAM HEADLIGHTS FAILURE
(Automatic High Beam) (where provided)
The symbol switches on to report a failure of the
automatic main beam headlights.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
81
Symbol
What it means
What to do
WATER IN DIESEL FILTER (Diesel versions)
The symbol switches on constantly while driving, along to
indicate the presence of water in the diesel filter.
21)
DPF CLEANING (particulate trap) in progress (diesel
versions with DPF only)
The symbol comes on when the ignition device is brought
to ON, but it should switch off after a few seconds.
The symbol switches on constantly to indicate that the
DPF system needs to eliminate the trapped pollutants
(particulate) through the regeneration process.
The symbol does not switch on during every DPF
regeneration, but only when driving conditions require
that the driver is notified.
WARNING Failure to follow the procedure provided for
when the symbol comes on for a mileage equal to or
greater than 18 mile (30 km) or for a cumulative time
equal to or greater than 2 hours), may result in the
warning light
coming on with consequent damage
to the DPF device. Remember that if the warning light
is on, it is necessary to go to the Alfa Romeo
Dealership to restore the correct function of the DPF.
22)
To turn off the symbol, keep the car in motion until the
regeneration process is over. The process normally takes
about 15 minutes. Optimal conditions for completing the
process are achieved by travelling at 37 mph (60 km/h)
with engine speed above 2000 rpm.
When this symbol switches on, it does not indicate a fault
and thus it should not be taken to a workshop.
GPF CLEANING (particulate trap) in progress (petrol
versions with GPF only)
The symbol switches on fixed, together with a dedicated
message on the display, to indicate that the GPF system
needs to eliminate the trapped pollutants (particulate) by
means of the regeneration process.
The symbol does not light up on during every GPF
regeneration, but only when driving conditions require
that the driver is notified.
To turn off the symbol, keep the car in motion until the
regeneration process is over. The optimal conditions
for completing the process are achieved by varying the
speed of the car (pressure on the accelerator pedal). Hold
a speed faster than 45 mph (70 km/h) on extra-urban
roads, varying the pressure on the accelerator pedal and
sometimes releasing it completely, until the symbol and
message disappear from the display.
When this symbol switches on, it does not indicate an
anomaly and thus it should not be taken to a workshop.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
82
Symbol
What it means
What to do
GPF FAILURE (particulate trap) (petrol versions with
GPF only)
The symbol lights up fixed together with the warning
light
and dedicated messages appear on the display
in case of failure to the GPF (Gasoline Particulate Filter).
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
AUTOMATIC TRANSMISSION FLUID OVERHEATING
The symbol switches on in the case of transmission
overheating, after a particularly demanding use. In this
case an engine performance limitation is carried out.
Wait for the symbol to disappear with the engine off or
idling.
TRAILER LIGHT CONTROL UNIT FAILURE
The symbol turns on to warn of failure in the control unit
that manages the trailer lights.
Check that the trailer light is correctly connected to the
socket. If the fault persists the next time you start the
engine, contact the Alfa Romeo Dealership as soon as
possible to have the system checked.
SOUND SYSTEM FAILURE
The symbol switches on to report a failure of the sound
system.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
SPEED LIMITER DEVICE FAILURE
While driving, the symbol switches on to signal a Speed
Limiter device failure.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
FUEL TANK CAP (where provided)
The symbol lights up if the fuel tank cap is open or not
properly closed.
Tighten the cap properly.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
83
Symbol
What it means
What to do
ELECTRIC PARKING BRAKE FAILURE
The symbol and the respective message appear on the
display to indicate a failure in the electric parking brake
system.
This failure could partially or completely block the
car because the electric parking brake could remain
activated even if automatically or manually disengaged
using the relevant controls.
If the car can still be used (electric parking brake not
engaged), drive carefully to the nearest Alfa Romeo
dealership, remembering that the electric parking brake
will not work.
38)
INSUFFICIENT ENGINE COOLANT LEVEL (where
provided)
If the symbol switches on, it indicates a low engine
coolant level condition.
Top up as described in the "Maintenance and Care"
chapter.
ACTIVE CRUISE CONTROL SYSTEM FAILURE
The symbol appears while driving to indicate a failure in
the Adaptive Cruise Control system.
Contact an Alfa Romeo Dealership to have the system
checked.
BRAKE PADS WEAR
The symbol lights up when the brake pads have reached
their wear limit.
Contact an Alfa Romeo Dealership as soon as possible.
WARNING Always use genuine parts or equivalents
because the Integrated Brake System (IBS) system could
detect anomalies.
WEAR ON CCB BRAKE DISCS (where provided)
The symbol will light up when the carbon ceramic brake
discs have reached the limit of wear.
Contact an Alfa Romeo Dealership as soon as possible.
39)
DYNAMIC DRIVE CONTROL SYSTEM FAILURE
This symbol appears to indicate a traction system
control failure.
ALL-WHEEL DRIVE FAILURE
This symbol switches on to report an all-wheel drive
system failure.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
84
Symbol
What it means
What to do
TEMPORARY ALL-WHEEL DRIVE FAILURE
(where provided)
The symbol will appear to indicate that the AWD dynamic
control system is temporarily deactivated to prevent
damage because of high engine load. The traction system
will work in RWD mode in this case.
Until the symbol appears on the display, reduce the load
to allow the system to cool down. The AWD system will
resume normal operation when the symbol disappears
from the display.
WINDSCREEN WIPER FAILURE
The symbol appears to indicate a windscreen wiper
failure.
Contact an Alfa Romeo Dealership.
GENERIC INDICATION
If this symbol appears, it indicates a windscreen wiper
failure.
The accompanying messages describe the failure.
AFS SYSTEM FAILURE
If this symbol appears, it indicates a failure of the
automatic directional headlight system.
Contact an Alfa Romeo Dealership to have the system
checked.
SOFT SUSPENSION CALIBRATION
(where provided)
The system appears when the most comfortable
suspension setting is activated.
SHOCK ABSORBERS FAILURE (ADC)
(where provided)
The symbol appears while driving to indicate a failure in
the suspension system.
Contact an Alfa Romeo Dealership to have the system
checked.
ABS ACTIVATION
The symbol appears when the ABS cuts in.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
85
Symbol
What it means
What to do
WINDSCREEN WASHER LIQUID LEVEL
The symbol appears for some seconds to indicate that
the level of the windscreen and headlight washing fluid
(where provided) is low.
Refill the liquid: to do this, see the "Level check" paragraph
in the "Maintenance and care" chapter. Always use liquid
with the features indicated in the "Liquids and lubricants"
section in the "Technical Specifications" chapter.
LOW AdBlue® (UREA) DIESEL EMISSIONS ADDITIVE
LEVEL WARNING
(2.2 JTD versions only)
The AdBlue® Diesel Emissions Additive (UREA) low level
symbol
turns on when the AdBlue® (UREA) level is
low. A warning and a message indicating the need to top
up AdBlue® (UREA) also appear on the display.
The symbol
stays on until the tank is topped up with at
least 1.11 UK gal (5 litres of AdBlue® (UREA)).
If you do not top up, a dedicated message will appear
on the instrument panel display whenever a certain
threshold is reached until it will no longer be possible to
start the engine.
A message will appear permanently on the instrument
panel and an acoustic tone will be heard when there is
about 125 miles (200 km) of range left.
A dedicated message will appear on the instrument panel
display when there are 0 miles (0 km) of range left. It will
no longer be possible to restart the engine after it has
been stopped. It will be possible to restart the engine
after pouring at least 1.11 UK gal (5 litres of AdBlue®
(UREA) in the tank).
Top up the AdBlue® (UREA) tank as soon as possible with
at least 5 litres of AdBlue® (UREA). If the top-up was done
with a range of 0 km left in the AdBlue® (UREA) tank, you
may need to wait 2 minutes before starting the engine.
23)
DAA SYSTEM FAILURE
The symbol comes on in the event of a DAA (Driver
Attention Assist) system failure.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
86
Symbol
What it means
What to do
HAS SYSTEM/TJA SYSTEM FAILURE
The symbol lights up in case of HAS (Highway Assist) or
TJA (Traffic Jam Assist) system failure.
Contact an Alfa Romeo Dealership as soon as possible to
have the failure eliminated.
WARNING
38)
If a failure is present with sharp braking, the rear wheels may lock and the vehicle may swerve.
39)
It is recommended to use only original or equivalent, bench-tested spare pads in order to ensure the original performance of the braking
system.
IMPORTANT
20)
Deteriorated engine oil should be replaced as soon as possible after the symbol is switched on, and never more than 500 km after it first
switches on. Failure to observe the above may result in severe damage to the engine and invalidate the warranty. When this symbol comes on, it
does not mean that the level of engine oil is low, so if it flashes you do not need to top up the engine oil.
21)
The presence of water in the fuel system circuit may cause severe damage to the injection system and irregular engine operation. If the
symbol is displayed contact an Alfa Romeo Dealership as soon as possible to bleed the system. If the above indications come on immediately after
refuelling, water has probably been introduced into the tank: stop the engine immediately and contact an Alfa Romeo Dealership.
22)
Vehicle travel speed should always be adapted to the traffic and weather conditions, and must always comply with traffic regulations. The
engine can be stopped even if the DPF warning light is on: however, repeated interruptions of the regeneration process could cause premature
deterioration of the engine oil. For this reason it is always advisable to wait for the symbol to go off before turning off the engine, following the
instructions above. Do not complete the DPF regeneration process when the vehicle is stopped.
23)
When the AdBlue® (UREA) tank is empty and the engine stops it is no longer possible to restart it until the AdBlue® (UREA) tank is topped up
with at least 5 litres of AdBlue® (UREA).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
87
Green Symbols
Symbol
What it means
What to do
DIPPED BEAM HEADLIGHTS
The warning light switches on when the main beam
headlights are turned on.
AUTOMATIC DIPPED BEAM HEADLIGHTS
The symbol lights up when the automatic dipped beam
headlights are on.
START&STOP EVO INTERVENTION
The symbol comes on in the event of Start&Stop Evo
system intervention (stopping the engine).
When the engine is restarted the symbol switches off
(for the engine restarting modes see the "Start & Stop
Evo" paragraph in the "Starting and driving" chapter).
CRUISE CONTROL SYSTEM
The symbol comes on when the Cruise Control system is
activated.
ACTIVE CRUISE CONTROL SYSTEM
The symbol comes on when the Active Cruise Control
system is activated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
88
Blue symbols
Symbol
What it means
What to do
AUTOMATIC HIGH BEAM HEADLIGHTS
The symbol comes on when the automatic main beam
headlights are activated.
MAIN BEAM HEADLIGHTS
The symbol comes on when the main beam headlights are
activated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
89
EOBD SYSTEM (European On
Board Diagnosis)
(where provided)
OPERATION
The EOBD (European On Board Diagnosis
system) carries out a continuous
diagnosis of the components of the car
related to emissions.
It also alerts the driver, by switching on
the
warning light on the instrument
panel, when these components are no
longer in peak condition (see “Warning
lights and messages” paragraph in this
chapter).
The aim of the EOBD system (European
On Board Diagnosis) is to:
monitor the efficiency of the system;
indicate an increase in emissions;
indicate the need to replace damaged
components.
The car also has a connector, which
can interface with appropriate tools,
that makes it possible to read the error
codes stored in the electronic control
units together with a series of specific
parameters for engine operation and
diagnosis. This check can also be carried
out by the traffic police.
WARNING After eliminating a fault, to
check the system completely, the Alfa
Romeo Dealership is obliged to run tests
and, if necessary, road tests which may
also require a long journey.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The chapter that you are about to read is very important: it
describes the safety systems with which the car is equipped
and provides instructions on how to use them correctly.
SAFETY
ACTIVE SAFETY SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
DRIVING ASSISTANCE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
DAA (Driver Attention Assist) SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
OCCUPANT PROTECTION SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
SEAT BELTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
SBA (Seat Belt Alert) SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
PRE-TENSIONERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
CHILD RESTRAINT SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
SUPPLEMENTARY RESTRAINT SYSTEM (SRS) - AIRBAG . . . . . . . . . 126
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SAFETY
92
ACTIVE SAFETY SYSTEMS
The car may be equipped with the
following active safety devices:
ABS (Anti-Lock Brakes);
DTC (Drive Train Control);
ESC (Electronic Stability Control);
TC (Traction Control);
PBA (Panic Brake Assist);
HSA (Hill Start Assist);
AST (Alfa™ Steering Torque);
ATV (Alfa™ Active Torque Vectoring).
For the operation of the systems, see the
following pages.
ABS (Anti-lock Braking System)
This system, which is an integral part
of the braking system, prevents one or
more wheels from locking and slipping in
all road surface conditions, irrespective
of the intensity of the braking action,
ensuring that the car can be controlled
even during emergency braking and
optimising stopping distances.
The system intervenes during braking
when the wheels are about to lock,
typically in emergency braking or
low-grip conditions, when locking may be
more frequent.
The system also improves control and
stability of the car when braking on a
surface where the grip of the left and
right wheels varies, or on corners.
The Electronic Braking Force
Distribution (EBD) system completes the
system allowing the brake force to be
distributed between the front and rear
wheels.
System intervention
The ABS equipped on this car is provided
with the "Brake by wire" (Integrated
Brake System - IBS) function. With this
system, the brake pedal command
given by pressing the brake pedal is
not transmitted hydraulically but
electronically, therefore, the light
pulsation that could be felt on the pedal
with the traditional system is no longer
perceptible.
40) 41) 42) 43) 44) 45) 46)
DTC (Drive Train Control) SYSTEM
(where provided)
Some versions of this car are
equipped with an automatically
activated/deactivated all-wheel drive
system (AWD), which offers an optimal
drive for countless driving conditions
and road surfaces. The system reduces
the slipping of the tyres to a minimum,
automatically redistributing the torque
to the front and rear wheels, as needed.
To maximise fuel savings, the car with
AWD automatically passes to rear-
wheel drive (RWD) when the road and
environmental conditions are such that
they would not cause the tyres to slip.
When the road and environmental
conditions require better traction, the
car automatically goes to AWD mode.
47)
WARNING If the system failure symbol
switches on, after starting the engine
or while driving, it means that the
AWD system is not working properly.
If the warning message activates
frequently, it is recommended to carry
out maintenance operations.
48)
ESC (Electronic Stability Control)
SYSTEM
The ESC system improves the directional
control and stability of the car in various
driving conditions.
The ESC system corrects the car’s
understeer and oversteer, distributing
the brake force on the appropriate
wheels. The torque supplied by the
engine can also be reduced in order to
maintain control of the car.
The ESC system uses sensors installed
on the car to determine the trajectory
that the driver intends to follow and
compares it with the car’s effective
trajectory. When the real trajectory
deviates from the desired trajectory, the
ESC system intervenes to counter the
car’s understeer or oversteer.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
93
Oversteer
: occurs when the car is
turning more than it should according to
the angle of the steering wheel.
Understeer
: occurs when the car is
turning less than it should according to
the angle of the steering wheel.
System intervention
The intervention of the system is
indicated by the flashing of the ESC
warning light on the instrument panel, to
inform the driver that the car stability
and grip are critical.
42) 49) 44) 45) 46)
Deactivating the system
The ESC system deactivates
automatically when using RACE driving
mode (where provided).
TC (Traction Control) SYSTEM
The system automatically operates in
the event of slipping, loss of grip on wet
roads (aquaplaning) and acceleration on
slippery, snowy or icy roads, etc. on one
or both drive wheels. Depending on the
slipping conditions, two different control
systems are activated:
if the slipping involves both drive
wheels
, the system intervenes, reducing
the power transmitted by the engine;
if the slipping only involves one of the
drive wheels
, the BLD (Brake Limited
Differential) function is activated,
automatically braking the wheel which is
slipping (the behaviour of a self-locking
differential is simulated). This will
increase the drive torque transferred to
the wheel that is not slipping.
System intervention
The intervention of the system is
indicated by the flashing of the ESC
warning light on the instrument panel, to
inform the driver that the car stability
and grip are critical.
42) 43) 44) 45) 46)
PBA (Panic Brake Assist) SYSTEM
The PBA system is designed to improve
the car’s braking capacity during
emergency braking.
The system detects emergency braking
by monitoring the speed and force with
which the brake pedal is pressed, and
consequently applies the optimal brake
pressure. This can reduce the braking
distance: the PBA system therefore
complements the ABS.
Maximum assistance from the PBA
system is obtained by pressing the brake
pedal very quickly. In addition, the brake
pedal should be pressed continuously
during braking, avoiding intermittent
presses, to get the most out of the
system. Do not reduce pressure on the
brake pedal until braking is no longer
necessary.
The PBA system is deactivated when the
brake pedal is released.
42) 43) 44)
HSA (Hill Start Assist) SYSTEM
This is an integral part of the ESC system
and facilitates starting on slopes,
activating automatically in the following
cases:
uphill
: car stationary on a road with a
gradient higher than 5%, engine running,
brake pressed and transmission in
neutral or gear other than reverse
engaged;
downhill
: car stationary on a road
with a gradient higher than 5%, engine
running, brake pressed and reverse gear
engaged.
When setting off, the ESC system
control unit maintains the braking
pressure on the wheels until the drive
torque necessary for starting is reached,
or in any case for a maximum of 2
seconds, allowing your right foot to be
moved easily from the brake pedal to the
accelerator.
When the 2 seconds have elapsed,
without starting, the system is
automatically deactivated, gradually
releasing the braking pressure.
During this release stage, the typical
mechanical brake release noise can be
heard, indicating that the car is about to
move.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст