Renault Scenic 3 Chassis. Manual — part 25
36B
-
5
POWER ASSISTED STEERING
Steering column
36B
These operations do not require a lift.
REMOVAL
Disconnect the battery, starting with the negative ter-
minal.
Move the steering column to the low position and pull
it out as far as possible.
Remove the lower casing bolts.
Insert a screwdriver in the aperture behind the stee-
ring wheel.
Unlock the system (9).
Remove the driver's frontal air bag.
Special tooling required
Ms. 1373
Philips radio removal
tool
Ms. 1639
Tool for removing radio
- CD player
Equipment required
Diagnostic tool
Tightening torques
m
steering column moun-
ting nuts
2.1 daNm
steering column univer-
sal joint bolt
2.4 daNm
casing bolts
0.2 daNm
steering wheel bolt
4.4 daNm
IMPORTANT
Before carrying out any work on a safety system
component, lock the air bag computer using the
Diagnostic tool (Section Electrical equipment).
When the function is activated all the trigger lines
are inhibited, and the air bag warning light on the
instrument panel will be lit continuously (when igni-
tion on).
NOTE
- In the event of problems likely to be caused by a
faulty computer, (see Technical Note 3700A).
103832
18455
9
36B
-
6
POWER ASSISTED STEERING
Steering column
36B
Remove the air bag connectors.
Straighten the wheels.
Disconnect the connectors in the steering wheel.
Remove:
- the steering wheel bolt,
- the steering wheel.
Unclip the upper casing.
Unclip the lower casing.
103813
103799
103800
103801
36B
-
7
POWER ASSISTED STEERING
Steering column
36B
Disconnect the rotary switch connectors.
Undo the rotary switch bolt (10).
Unclip the rotary switch.
Remove the rotary switch.
Unclip the « gear lever gaiter - knob » assembly.
103802
10
103598
103600
36B
-
8
POWER ASSISTED STEERING
Steering column
36B
Unclip the gear lever upper trim.
Disconnect:
- the hazard warning lights switch connector,
- the cigarette lighter connector,
- the voice synthesiser speaker connector.
Remove the gear lever lower trim mountings.
Remove:
- the gear lever lower trim,
- the radio using tool (Ms. 1373) and tool (Ms. 1639),
- the air conditioning control panel fascia.
Unclip:
- the glovebox (11),
- the beam adjustment control (12) from the rear
(Section Electrical equipment).
Disconnect the beam adjustment control connectors.
103601
103603
103604
103166
12
11
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст