Renault Premium engine. Manual — part 14
1 / 3
Rocker shaft and camshaft bearing caps, tightening torques
The bolts can be re-used no more than
5 times maximum. Mark the bolt head with an indentation (A) after tightening each time using a centre punch. In
this case, apply engine oil to the screw-threads and under the bolt heads.Do not apply engine oil to new bolts, which are already pre-lubricated.
2 / 3
Stage
1: bolts (1 › 7)
25±3 Nm
Stage
2: bolts (9 - 11 - 13)
90±5 Nm
3 / 3
For the 2nd stage, tighten the bolts gradually, starting with bolt (11), so the rocker shaft descends without distorting.
Stage
3: bolts (8 - 10 - 12 - 14)
60±5 Nm
Stage
4: bolts (9 - 11 - 13)
Loosen the bolts
Stage
5: bolts (9 - 11 - 13)
60±5 Nm
Stage
6: bolts (1 › 7)
90±5 °
Stage
7: bolts (8 › 14)
100±5 °
1 / 1
Rocker arms, tightening torques
Valve play adjusting screw locknut
38±4 Nm
Exhaust valves play adjusting shim securing bolts (Optibrake retarder)
38±4 Nm
Unit pump injector pre-travel adjusting screw locknut
52±4 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст