Renault Premium engine. Manual — part 13
2 / 4
Tap the screw-threads in the cylinder block then blow through with compressed air.
3 / 4
The cylinder head must be positioned and tightened in accordance with the instructions given in the method (see page ).
The item numbers indicate the tightening sequence.
Stage
1
65±5 Nm
Stage
2 (check tightening)
65±5 Nm
Stage
3
120±5 °
Stage
4
90±5 °
Bolts
M8 securing the unit pump injectors wiring harness bracket
24±4 Nm
4 / 4
The bolts M8 can be re-used 5 times. If they are, do not apply any product to the screw-threads.Do not apply any product to new bolts, which
are already pre-coated.
1 / 1
Cylinder head plugs, tightening torques
Plug
M10 x 1.00
20±4 Nm
Pre-coated plug
M14 x 1.50
30±3 Nm
Pre-coated plug
M10 x 1.00
10±2 Nm
Pre-coated straight union
10 Nm
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст