Renault Magnum engine. Manual — part 7
3 / 12
Position the casing
(1) / gasket (2) / protection ring (3) assembly on the crankshaft (4).
Push the casing
(1) as far as abutment.
Withdraw protective ring
(1).
4 / 12
Fit bolts
(1).
Start bolts
(1).
Remove headless bolts
(2).
Fit bolts
(1).
5 / 12
Tighten bolts
(1 - 2) to torque.
See pages .
Withdraw tool 6401.
Fit the oil sump.
See pages .
Fit damper.
See pages .
Model: B
Install tool 6401.
Tighten bolts to torque.
See pages .
Fit bolts
(1) in locations (A).
Use
2 headless screws (1) diameter: M8 mm, length: 50 mm.
Clean the contact faces thoroughly.
Apply a bead of sealing compound to the gearbox casing joint face.
Apply "
SILICONE 7091
".
See pages .
6 / 12
Fit casing
(1).
Fit bolts
(2).
Start bolts
(2).
Remove headless bolts
(3).
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст