Renault Magnum engine. Manual — part 15
8 / 25
Fit bolts
(19).
Tighten to torque.
See pages .
Use tool 9776.
Check that the crankshaft rotates freely by turning it by hand.
9 / 25
Crankshaft end play
Gauge the crankshaft end play .
Use tool 9661 + 8511.
Correct, if necessary.
For values, see "Technical data" chapter.
See pages .
Fit flywheel.
See pages .
Fit crankshaft front seal casing varref vrefid="1" idpos="1">.
See pages .
Reaction rod
10 / 25
Preparing a new connecting rod
* Immobilize the connecting rod
(14) in a vice; use protections.
* Remove bolts
(5).
* Free connecting rod cap
(6) using a plastic mallet.
* Blow compressed air over the contact faces
(A - B) of the connecting rod and of the connecting rod cap.
11 / 25
Split connecting rodSo as to not have to loosen a connecting rod during operation, it is crucial to not bump, nor apply oil to the part and keep
the contact faces (A - B), which correspond to the relief of the connecting rod cap / connecting rod parting line, immaculately clean.
Piston
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст