Daewoo Nubira. Manual — part 5
9T – 6
I
REMOTE KEYLESS ENTRY AND ANTI–THEFT SYSTEM
DAEWOO V–121 BL4
2. Remove the siren electrical connector.
3. Remove the siren bracket mounting bolt.
4. Remove the siren.
Installation Procedure
1. Install the siren on the siren bracket with the mount-
ing screws.
Tighten
Tighten the siren bracket mounting bolts to 22 N
S
m
(16 lb–in).
2. Connect the siren electrical connector.
REMOTE KEYLESS ENTRY AND ANTI–THEFT SYSTEM 9T – 7
DAEWOO V–121 BL4
FRONT DOOR TAMPER SWITCH
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the front door trim panel. Refer to Section
9G, Interior Trim.
3. Disconnect the door tamper switch electrical con-
nector.
4. Remove the front door lock and the integral door
tamper switch. Refer toSection 9P, Doors.
Installation Procedure
1. Install the front door lock and the integral door tam-
per switch. Refer toSection 9P, Doors.
2. Install the door tamper switch electrical connector.
3. Install the front door trim panel. Refer to Section
9G, Interior Trim.
4. Connect the negative battery cable.
REAR DECK LID TAMPER SWITCH
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the rear deck lid tamper switch electri-
cal connector from the tamper switch.
3. Remove the rear deck lid tamper switch.
9T – 8
I
REMOTE KEYLESS ENTRY AND ANTI–THEFT SYSTEM
DAEWOO V–121 BL4
Installation Procedure
1. Install the rear deck lid tamper switch.
2. Connect the rear deck lid tamper switch electrical
connector to the tamper switch.
3. Connect the negative battery cable.
HOOD OPEN SWITCH
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector from the hood
open switch.
3. Remove the mounting screw from the hood open
switch.
4. Remove the hood open switch.
REMOTE KEYLESS ENTRY AND ANTI–THEFT SYSTEM 9T – 9
DAEWOO V–121 BL4
Installation Procedure
1. Install the hood open switch with the mounting
screw.
Tighten
Tighten the hood open switch mounting screw to 8
N
S
m (71 lb–in).
2. Connect the electrical connector to the hood open
switch.
3. Connect the negative battery cable.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст