Daewoo Nubira. Manual — part 212
9H – 8
I
SEATS
DAEWOO V–121 BL4
3. Install the seat track to the seat cushion with the
bolts underneath the cushion.
Tighten
Tighten the lower seat cushion bolts to 24 N
S
m (18
lbft).
4. Install the seat trim. Refer to”Front Seat Trim” in
this section.
5. Install the seatback. Refer to”Front Seatback” in
this section.
FRONT SEAT TRIM
Removal Procedure
1. Remove the front bucket seat from the vehicle. Re-
fer to”Front Bucket Seats” in this section.
2. Remove the recliner adjustment knob cap to reveal
the screw.
3. Remove the screw and the recliner adjustment han-
dle.
4. Remove the seat cushion height adjuster knob caps
to reveal the screws.
5. Remove the screws and the seat cushion height
adjuster knobs.
6. Remove the plastic caps to reveal the front seat
trim screws.
7. Remove the screws and the front seat trim.
SEATS 9H – 9
DAEWOO V–121 BL4
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1. Install the front seat trim with the screws.
Tighten
Tighten the front seat trim screws to 12 N
S
m (106
lbin).
2. Install the plastic caps.
3. Install the seat cushion height adjuster knobs with
the screws.
Tighten
Tighten the seat cushion height adjuster knob screws
to 10 N
S
m (89 lb–in).
4. Install the seat cushion height adjustment knob
caps.
5. Install the recliner adjustment knob with the screw.
Tighten
Tighten the recliner adjustment knob screw to 12 N
S
m
(106 lb–in).
6. Install the recliner adjustment knob cap.
7. Install the front bucket seat in the vehicle. Refer
to”Front Bucket Seats” in this section.
REAR SEAT CUSHION
Removal Procedure
1. Remove the rear seat cushion from the floor by
sliding it rearward and lifting it off the retaining
brackets.
9H – 10
I
SEATS
DAEWOO V–121 BL4
Installation Procedure
1. Install the rear seat cushion by inserting the metal
loops into the retaining brackets and sliding the
cushion forward.
REAR SEATBACK (NOTCHBACK)
Removal Procedure
1. Remove the rear seat cushion. Refer to ”Rear Seat
Cushion” in this section.
2. Remove the center hinge and rear seat back.
Installation Procedure
1. Install the center hinge and rear seat back.
Tighten
Tighten the center seat hinge bolts to 25 N
S
m (18 lb–
ft).
SEATS 9H – 11
DAEWOO V–121 BL4
60/40 SPLIT REAR SEATBACK HINGE
Removal Procedure
1. Remove the rear seatbacks and the cushion. Refer
to ”60/40 Split Rear Seatback” and”Rear Seatback”
in this section.
2. Remove the seatback lock strikers. Refer to”60/40
Split Rear Seatback Lock Striker” in this section.
3. Remove the outer hinge bolts.
4. Remove the bolts and the center hinge.
Installation Procedure
1. Install the outer hinge bolts.
Tighten
Tighten the center seat hinge bolts to 25 N
S
m (18 lbft).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст