Daewoo Nubira. Manual — part 211
9H – 4
I
SEATS
DAEWOO V–121 BL4
Installation Procedure
1. Install the guide sleeves into the seatback and
press them down in order to engage the guide
sleeve retaining latches.
2. Install the head restraint into the guide sleeves.
FRONT SEATBACK
Removal Procedure
1. Remove the front bucket seat from the vehicle. Re-
fer to”Front Bucket Seats” in this section.
2. Remove the hog rings at the base of the seatback.
3. Reposition the seatback cover.
4. Remove the bolts and the seatback.
SEATS 9H – 5
DAEWOO V–121 BL4
Installation Procedure
1. Install the seatback onto the seat cushion.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the front seatback bolts.
Tighten
Tighten the front seatback bolts to 45 N
S
m (33 lb–ft).
3. Install the seat cover to its original position.
4. Install new hog rings onto the base of the seat cov-
er.
5. Install the front bucket seat in the vehicle. Refer
to”Front Bucket Seats” in this section.
FRONT SEAT CUSHION
Removal Procedure
1. Remove the front seat from the vehicle. Refer
to”Front Bucket Seats” in this section.
2. Remove the seat trim. Refer to”Front Seat Trim”
3. Remove the side seat cushion bolts.
9H – 6
I
SEATS
DAEWOO V–121 BL4
4. Remove the seat cushion bolts underneath the
cushion.
5. Remove the cushion from the seat track.
Installation Procedure
1. Install the cushion onto the seat track.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the seat track to the seat cushion with the
bolts on the side of the cushion.
Tighten
Tighten the side seat cushion bolts to 24 N
S
m (18 lbft).
3. Install the seat cushion bolts underneath the cush-
ion.
Tighten
Tighten the lower seat cushion bolts to 24 N
S
m (18
lbft).
4. Install the seat trim. Refer to”Front Seat Trim” in
this section.
5. Install the front seat in the vehicle. Refer to”Front
Bucket Seats” in this section.
SEATS 9H – 7
DAEWOO V–121 BL4
FRONT SEAT ADJUSTERS
Removal Procedure
1. Remove the seatback. Refer to”Front Seatback” in
this section.
2. Remove the seat trim. Refer to”Front Seat Trim” in
this section.
3. Remove the side seat cushion bolts.
4. Remove the seat cushion bolts underneath the
cushion.
5. Remove the seat track from the seat cushion.
Installation Procedure
1. Install the cushion onto the seat track.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the seat track to the seat cushion with the
side seat cushion bolts.
Tighten
Tighten the side seat cushion bolts to 24 N
S
m (18 lbft).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст