Daewoo Nubira. Manual — part 18
9O – 6
I
BUMPERS AND FASCIAS
DAEWOO V–121 BL4
FRONT BUMPER ENERGY
ABSORBER
Removal Procedure
1. Remove the front bumper fascia. Refer to”Front
Bumper Fascia” in this section.
2. Remove the energy absorber.
Installation Procedure
1. Install the energy absorber.
2. Install the front bumper fascia. Refer to”Front
Bumper Fascia” in this section.
FRONT BUMPER IMPACT BAR
Removal Procedure
1. Remove the front bumper fascia. Refer to”Front
Bumper Fascia” in this section.
2. Remove the front bumper energy absorber. Refer
to”Front Bumper Energy Absorber” in this section.
3. Remove the front bumper impact bar nuts.
BUMPERS AND FASCIAS 9O – 7
DAEWOO V–121 BL4
4. Remove the front impact bar bolts.
5. Remove the impact bar.
Installation Procedure
1. Install the impact bar.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the front impact bar bolts.
Tighten
Tighten the front impact bar bolts to 22 N
S
m (16 lb–ft).
3. Install the front bumper impact bar nuts.
Tighten
Tighten the front impact bar nuts to 30 N
S
m (22 lb–ft).
4. Install the front bumper energy absorber. Refer
to”Front Bumper Energy Absorber” in this section.
5. Install the front bumper fascia. Refer to”Front
Bumper Fascia” in this section.
9O – 8
I
BUMPERS AND FASCIAS
DAEWOO V–121 BL4
REAR BUMPER FASCIA
(Notchback Shown, Hatchback and
Wagon Similar)
Removal Procedure
1. Remove the bolts and the rear wheel mud guards.
2. Remove the bolts and the screws and the rear
wheel well splash shields.
3. Remove the fascia bolts at the top of the rear wheel
wells.
4. Remove the taillamps. Refer to Section 9B, Lighting
Systems.
5. Remove the upper fascia screws.
BUMPERS AND FASCIAS 9O – 9
DAEWOO V–121 BL4
6. Remove the lower fascia screws.
7. Remove the luggage compartment rear quarter trim
panel.
8. Remove the fascia bolts in the luggage compart-
ment.
9. Remove the fascia.
Installation Procedure
1. Install the fascia.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the luggage compartment fascia bolts.
Tighten
Tighten the luggage compartment fascia bolts to 8
N
S
m (71 lb–in).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст