Daewoo Korando. Manual — part 349
9P-6 DOORS
Removal & Installation Procedure
1. Remove the lower hinge bolt of tail gate and stopper
mounting bolt.
2. Disconnect the wiring connector.
3. Remove the mounting bolt and remove the tail gate.
Adjustment
<Door Striker>
Adjust the striker in horizontal/vertical directions and then adjust
the height of striker.
l
Clearance between tailgate and quarter outer rear panel.
Clearance
4.3 - 6.3 Nm
DOORS 9P-7
POWER WINDOW MOTOR
1 Door
2 Door Trim Panel
3 Inside Handle Mounting Plate
4 Door Opening Lamp
5 Door Pulling Handle
6 Door Trim Mounting Bracket
7 Door Defroster Grommet
8 Power Window Motor
9 Regulator
9P-8 DOORS
Removal & Installation Procedure
1. Unscrew the screw (arrow) and remove the door pulling
handle.
2. Disconnect the connector and remove the power window
switch assembly.
3. Remove the inside handle mounting plate.
4. Remove the door trim panel assembly.
5. Unscrew two screws (arrows) and remove the door lock
opening handle assembly and disconnect opening handle
ratch dar.
6. Unscrew three screw (arrow) and remove the door trim
mounting bracket.
7. Disconnect the opening lamp connector.
DOORS 9P-9
8. Remove the door vinyl.
9. Unscrew the upper and lower nuts(4 piecess) and remove
the door regulator.
10. Unscrew three nuts(arrow) and remove the power window
motor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст