Daewoo Korando. Manual — part 348
9P-2 DOORS
SCHEMATIC AND ROUTING DIAGRAMS
POWER WINDOW
DOORS 9P-3
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
FRONT DOOR
1 Door Trim Panel Assembly
2 Center Upper Panel
3 Inside Handle Mounting Plate
4 Door Pull Handle
5 Door Defroster Nozzle
6 Door Defroster Duct
7 Door Trim Panel
8 Door Pocket
9 Belt Inside Strap
10 Door Trim Mounting Fastener
11 Door Courtesy Lamp
12 Screw
13 Door Pull Handle Mounting Support Bracket
14 Door Trim Complete Mounting Clip
15 Door Inside handle Mounting Gromet
16 Door Defroster Gromet
17 Door Defroster Gromet Vessel
18 Door Pocket Mounting Screw
19 Door Trim Pad
9P-4 DOORS
Adjustment Procedure
1. Install door striker to side outer panel and tighten the screw
slightly.
2. Unlock the door and check the clearance between door
and side outer panel.
3. If necessary, insert the seam.
4. Adjust latch lever to the center of striker and tighten the
screw.
Clearance
3.5 - 5.5 Nm
Tightening Torque
10 - 19 Nm
DOORS 9P-5
TAIL GATE
1 Upper Bracket
2 Lower Bracket
3 Bolt
4 Tail Gate
5 Stopper
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст