Daewoo Musso. Manual — part 77
OM600 ENGINE MECHANICAL 1B3-15
15. Remove the air-conditioner lines from the compressor.
Notice
Evacuate the refrigerant before removal.
12. Remove the hose(air cleaner to turbocharger) with blow
by hose.
13. Disconnect the air cleaner intake hose and remove the air
cleaner cover and element.
14. Disconnect the coolant hose from the water inlet.
1B3-16 OM600 ENGINE MECHANICAL
16. Remove the power steering pump lines.
Notice
Completely drain the fluid.
17. Disconnect the fuel feed line with prefilter from the feed
pump on injection pump.
18. Vehicle with automatic transmission.
Remove the hydraulic lines (19, 20) from oil cooler (2).
19. Disconnect the engine harness.
20. Disconnect the preheating time relay cable.
OM600 ENGINE MECHANICAL 1B3-17
26. Disconnect the starter motor wires and remove the starter
motor.
21. Remove the fuel lines from the fuel filter and cover the
filter with plug.
22. Disconnect the brake booster hose from vacuum pump.
23. Disconnect the other vacuum lines.
24. Disconnect the ground cable.
25. Disconnect the alternator wires.
1B3-18 OM600 ENGINE MECHANICAL
27. Disconnect the preheating time relay sensor plug.
28. Disconnect the coolant temperature sensor plug.
29. Disconnect the accelerator cable from the control linkage.
Installation Notice
Tightening Torque
8 - 18 Nm
30. Loosen the connection of control pressure cable (an arrow)
used in auto transmission.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст