Daewoo Musso. Manual — part 76
OM600 ENGINE MECHANICAL 1B3-11
000 589 14 21 00
Tester
001 589 65 09 00
Serration Wrench
116 589 02 34 00
Thread Bolt
SPECIAL TOOLS TABLE (Cont’d)
000 589 00 68 00
Cleaning Set
601 589 05 21 00
Looking Screw
617 589 08 21 00
Position Sensor
667 589 04 63 00
Retaining Plate
601 589 00 08 00
Flange
1B3-12 OM600 ENGINE MECHANICAL
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
ENGINE ASSEMBLY
OM600 ENGINE MECHANICAL 1B3-13
4. Remove the radiator drain cock and drain the coolant.
Notice
Open the coolant reservoir tank cap.
3. Remove the skid plate.
Installation Notice
Tightening Torque
28 - 47 Nm
5. Remove the drain plug (1) and seal (2) from the cylinder
block and drain the coolant completely.
6. After draining, replace the seal and reinstall the drain plug.
Installation Notice
7. Disconnect the lower coolant hose from the radiator.
Tightening Torque
30 Nm
Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
1B3-14 OM600 ENGINE MECHANICAL
9. Loosen the bolt and remove the coolant pipe and cooling
fan shroud.
10. Remove the hoses (air intake to intercooler, intercooler to
intake duct).
8. Disconnect the upper coolant hose from the radiator.
Tightening Torque
3 -7 Nm
11. Remove the pipes connected to intercooler.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст