Hyundai Elantra Hybrid (2023 year). Manual in english — page 5
Instrument Cluster
Check daytime running light (if
Check Forward Collision-Avoidance
equipped)
Assist system (if equipped)
This warning message is displayed
This warning message is displayed
if the daytime running lights are not
if there is a problem with Forward
operating properly. A lamp may need to
Collision-Avoidance Assist. Have the
be replaced.
vehicle inspected by an authorized
HYUNDAI dealer.
Make sure to replace the burned out
bulb with a new one of the same wattage
For more details, refer to “Forward
rating.
Collision-Avoidance Assist (FCA)” in
chapter 7.
Check high mounted stop lamp (if
equipped)
Check Lane Keeping Assist system (if
equipped)
This warning message is displayed if
the high mounted stop lamp are not
This warning message is displayed if
operating properly. A lamp may need to
there is a problem with Lane Keeping
be replaced.
Assist. Have the vehicle inspected by an
authorized HYUNDAI dealer.
Make sure to replace the burned out
bulb with a new one of the same wattage
For more details, refer to “Lane Keeping
rating.
Assist (LKA)” in chapter 7.
Check headlight LED (if equipped)
Check Blind-Spot Collision Warning
This warning message is displayed
system (if equipped)
if there is a problem with the LED
This warning message is displayed if
headlight. Have the vehicle inspected by
there is a problem with the Blind-Spot
an authorized HYUNDAI dealer.
Collision Warning. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
For more details, refer to “Blind-Spot
Collision Warning (BCW) ” in chapter 7.
4-24
04
Check Driver Attention Warning
Ready to start driving
system (if equipped)
This message is displayed when the
This warning message is displayed if
vehicle is ready to be driven.
there is a problem with Driver Attention
Warning. Have the vehicle inspected by
Check regenerative brakes
an authorized HYUNDAI dealer.
This message is displayed when the brake
For more details, refer to “Driver
performance is low or the regenerative
Attention Warning (DAW)” in chapter 7.
brake does not work properly due to a
problem in the brake system.
Check High Beam Assist system
If this occurs, it may take longer for the
(if equipped)
brake pedal to operate and the braking
This warning message is displayed if
distance may become longer.
there is a problem with the High Beam
Assist. Have the vehicle inspected by an
Stop vehicle and check brakes
authorized HYUNDAI dealer.
This message is displayed when there is
For more details, refer to “High Beam
a problem in the brake system.
Assist (HBA)” in chapter 5.
If this occurs, park the vehicle in a
safe location and we recommend that
Check Smart Cruise Control system
you tow your vehicle to the nearest
(if equipped)
authorized HYUNDAI dealer and have the
This warning message is displayed if
vehicle inspected.
there is a problem with Smart Cruise
Control. Have the vehicle inspected by
an authorized HYUNDAI dealer.
For more details, refer to “Smart Cruise
Control (SCC)” in chapter 7.
4-25
Instrument Cluster
Check Hybrid system
Check virtual engine sound system
This message is displayed when there
This message is displayed when there is
is a problem with the hybrid system.
a problem with the Virtual Engine Sound
Refrain from driving when the warning
System (VESS).
message is displayed.
If this occurs, we recommend that
If this occurs, we recommend that
you have the vehicle inspected by an
you have the vehicle inspected by an
authorized HYUNDAI dealer.
authorized HYUNDAI dealer.
Refill inverter coolant
Stop safely and check Hybrid system
This message is displayed when the
This message is displayed when there is
inverter coolant is nearly empty.
a problem with the hybrid system. The “
You should refill the inverter coolant.
” indicator will blink and a warning
chime will sound until the problem is
Park with engine On to charge
solved. Refrain from driving when the
battery
warning message is displayed.
This message is displayed when the
If this occurs, we recommend that
hybrid battery power (SOC) level is low.
you have the vehicle inspected by an
authorized HYUNDAI dealer.
If this occurs, park the vehicle in a safe
location and wait until the hybrid battery
is charged.
Check Hybrid system. Do not start
engine
Start engine to avoid battery
This message is displayed when the
discharge
hybrid battery power (SOC) level is low.
A warning chime will sound until the
This message is displayed to inform the
driver the 12V battery may be discharged
problem is solved. Refrain from driving
when the warning message is displayed.
if the ignition switch is in ON position
(without the
indicator ON).
If this occurs, we recommend that
you have the vehicle inspected by an
Set the vehicle to the ready (
) mode
to prevent the 12V battery from being
authorized HYUNDAI dealer.
discharged.
Stop safely and check power supply
This message is displayed when there is
a problem in the power supply system.
If this occurs, park the vehicle in a safe
location and tow your vehicle to the
nearest authorized HYUNDAI dealer and
have the vehicle inspected.
4-26
04
/&' ',63/$< ǣ7<3( $Ǥ
Type A
Type B
OCN7040023L
The LCD display modes can be changed by using the control buttons.
1.
: MODE button for changing modes
2.
,
: MOVE switch for changing items
3. OK : Push the SELECT/RESET button for setting or resetting the selected item
Information
When the infotainment system is applied, only the User’s Setting mode on the
infotainment system is supported but the User’s Setting mode on the instrument cluster is
not supported.
4-27
Instrument Cluster
LCD Display Modes
Modes
Symbol
Explanation
This mode displays driving information such as the tripmeter,
Trip
fuel economy, etc.
Computer
For more details, refer to "Trip Computer" in this chapter.
Turn By
This mode displays the state of the navigation.
Turn (TBT)
- Smart Cruise Control (SCC)
Driving
- Lane Keeping Assist (LKA)
Assist
- Lane Following Assist (LFA)
- Driver Attention Warning (DAW)
User
In this mode, you can change settings of the doors, lamps,
Settings
etc.
- This mode displays warning messages related to the
Warning
lamp malfunction, etc.
- Tire pressure information
The information provided may differ depending on which functions are applicable
to your vehicle.
4-28
04
Trip computer mode
Driving Assist mode
OCN7040040N
OCN7060074N
The trip computer mode displays
SCC/LKA /LFA/DAW
information related to vehicle driving
This group displays the state of the Smart
parameters including fuel economy, trip
Cruise Control, Lane Keeping Assist.
meter information and vehicle speed.
For more details, refer to each function
For more information, refer to "Trip
information in chapter 7.
Computer" in this chapter.
Turn By Turn (TBT) mode
OIG059288L
Driver Attention Warning
OIK047147N
This group displays information related
This mode displays the state of the
to Driver Attention Warning.
navigation.
For more details, refer to "Driver
Attention Warning (DAW)" in chapter 7.
4-29
Instrument Cluster
Master warning mode
ODN8049019L
OIG059097L
Tire Pressure
This warning light informs the driver the
This mode displays information related to
following situations.
Tire Pressure.
- Forward Collision-Avoidance Assist
For more information, refer to "Tire
malfunction (if equipped)
Pressure Monitoring System (TPMS)" in
chapter 8.
- Forward Collision-Avoidance Assist
radar blocked (if equipped)
- Blind-Spot Collision Warning
malfunction (if equipped)
- Blind-Spot Collision Warning radar
blocked (if equipped)
- High Beam Assist malfunction (if
equipped)
- Lamp malfunction (if equipped)
- Smart Cruise Control malfunction (if
equipped)
- Tire Pressure Monitoring System
(TPMS) malfunction (if equipped)
The Master Warning Light illuminates
if one or more of the above warning
situations occur. At this time, a Master
Warning icon (
) will appear beside
the User Settings icon (
), on the LCD
display. (if equipped)
If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.
4-30
04
User Settings Mode
Shift to P to edit settings / Engage parking
brake to edit settings
This warning message illuminates if
you try to select an item from the User
Settings mode while driving.
ś Intelligent variable transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
ś Manual transmission
For your safety, change the User
OCN7040038N
Settings after engaging the parking
In this mode, you can change the
brake.
settings of the instrument cluster, doors,
lamps, etc.
Quick guide (Help)
1. Driver Assistance
This mode provides quick guides for the
2. Door
systems in the User Settings mode.
3. Lights
Select an item, press and hold the OK
4. Sound
button.
5. Convenience
For more details about each system,
6. Service interval
refer to this Owner’s Manual.
7. Theme selection
8. Other
9. ECO vehicle
10. Language
11. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.
4-31
Instrument Cluster
1. Driver Assistance
Items
Explanation
ś Highway Driving Assist: The function assists the driver to maintain
Driving
the set speed, keep a safe distance with a vehicle ahead and keep
Assist
the vehicle inside of the lane while driving on the highway.
For more details, refer to "Highway Driving Assist (HDA)" in chapter 7.
Warning
To adjust the warning timing of the driver assistance system.
Timing
ś Normal / Late
Warning
To adjust the warning timing of the driver assistance system.
Volume
ś High / Medium / Low / Off
ś Leading Vehicle Departure Alert
To activate or deactivate Leading vehicle departure alert.
Driver
ś Inattentive Driving Warning
Attention
Warning
To activate or deactivate Driver Attention Warning.
For more details, refer to the “Driver Attention Warning (DAW)” in
chapter 7.
To adjust Lane Keeping Assist.
Forward
ś Active Assist/Warning Only/Off
Safety
For more details, refer to the "Forward Collision-Avoidance Assist
(FCA)" in chapter 7.
To adjust the Lane Keeping Assist function.
Lane Safety
ś Lane Keeping Assist/Lane Departure Warning/Off
For more details, refer to "Lane Keeping Assist (LKA)" in chapter 7.
ś Safe Exit Assist (SEA)
To activate or deactivate Safe Exit Assist.
Blind-Spot
For more details, refer to the “Safe Exit Assist (SEA)” in chapter 7.
Safety
(if equipped)
ś Active Assist/Warning Only/ Off
For more details, refer to “Blind-Spot Collision-Avoidance Assist
(BCA)” in chapter 7.
ś Parking Distance Warning Auto ON
ś Rear Cross-Traffic Safety
Parking
To Activate or deactivate Rear Cross-Traffic Collision-Avoidance Assist.
Safety
(if equipped)
ś Active Assist/Warning Only/ Off
For more details, refer to “Rear Cross-Traffic Collision-Avoidance
Assist (RCCA)” in chapter 7.
4-32
04
2. Door
Items
Explanation
ś Enable on Shift: All doors will be automatically locked if the shift
lever is moved from the P (Park) position to the R (Reverse), N
(Neutral), or D (Drive) position. (Only when the engine is running)
Auto Lock
ś Enable on Speed: All doors will be automatically locked when the
vehicle speed exceeds 15km/h (9.3mph).
ś Disable : The auto door lock operation will be deactivated.
ś On Shift to P: All doors will be automatically unlocked if the shift
lever is moved to P (Park) position. (Only when the engine is
running)
Auto Unlock
ś On key out/Vehicle Off : All doors will be automatically
unlockedwhen the ignition key is removed from the ignition switch
or the Engine Start/Stop button is set to the OFF position.
ś Disable : The auto door unlock operation will be canceled.
ś Off: The two press unlock function will be deactivated. Therefore, all
doors will unlock if the door unlock button is pressed.
Two Press
ś On: Only the driver’s door will unlock if the door unlock button is
Unlock
pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
To activate or deactivate the horn feedback.
If the horn feedback is activated, after locking the door by pressing the
Horn
lock button on the remote key, and pressing it again within 4 seconds,
Feedback
the horn feedback sound will operate once to indicate that all doors
are locked (if equipped with remote key).
To activate or deactivate the smart trunk.
Smart Trunk
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items
Explanation
To adjust the illumination level.
Illumination
- Level 1~20
ś Off: The one touch turn signal function will be deactivated.
One Touch
ś
3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
Turn Signal
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight
ś To activate or deactivate the headlight delay function.
Delay
For more details, refer to “Lighting” in chapter 5.
High Beam
ś To activate or deactivate the High Beam Assist function.
Assist
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
4-33
Instrument Cluster
4. Sound
Items
Explanation
Cluster
Voice
To adjust the cluster voice guidance volume.
Guidance
Volume
Welcome
To activate or deactivate the welcome sound.
sound
5. Convenience
Items
Explanation
ś Off: The seat easy access function is deactivated.
ś Normal/Extended: When you turn off the engine, the driver’s seat
Seat Easy
will automatically move rearward short (Normal) or long (Extended)
Access
for you to enter or exit the vehicle more comfortably.
For more details, refer to “Driver Position Memory System” in
chapter 5.
Rear
ś To activate or deactivate the rear occupant alert system.
Occupant
For more details, refer to the “Rear Occupant Alert (ROA)" in chapter
Alert
5.
ś On door unlock: The welcome light turns on automatically when the
doors are unlocked.
Welcome
ś On driver approach: The welcome light turns on automatically when
Light
the vehicle is approached with the smart key.
For more details, refer to ‘’Welcome System’’ in chapter 5.
Wireless
To activate or deactivate the wireless charging system in the front seat.
Charging
For more details, refer to “Wireless cellular phone charging system”
System
in chapter 5.
To activate or deactivate the Wiper/ Light mode.
Wiper/Lights
When activated, the LCD display shows the selected Wiper/Light mode
Display
whenever you changed the mode.
Icy Road
To activate or deactivate the icy road warning function.
Warning
4-34
04
6. Service interval
Items
Explanation
Enable
Service
To activate or deactivate the service interval function.
Interval
Information
To use the service interval menu, consult an authorized HYUNDAI dealer.
If the service interval is activated and the time and distance is adjusted, messages are
displayed in the following situations each time the vehicle is turned on.
- Service in
: Displayed to inform the driver the remaining mileage and days to service.
- Service required
: Displayed when the mileage and days to service has been reached or passed.
Information
If any of the following conditions occur, the mileage and number of days to service may be
incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
7. Theme selection
To select the style of instrument cluster graphic style and setting.
ś Theme A / Theme B / Theme C
4-35
Instrument Cluster
8. Other
Items
Explanation
ś Off: The average fuel economy will not reset automatically
whenever refueling.
ś After ignition: When the engine has been OFF for 4 hours or longer
Fuel Econ.
the average fuel economy will reset automatically.
Reset
ś After refueling: The average fuel economy will reset automatically
after adding 6 liters (1.6 gallons) of fuel or more and after driving
speed exceeds 1 km/h (1 mph).
For more details, refer to “Trip Computer” in this chapter.
Speed Unit
To select the speed unit. (km/h, MPH)
(if equipped)
Fuel Econ.
To select the fuel economy unit. (km/L, L/100km, MPG)
Unit
Temperature
To select the temperature unit. (°C,°F)
Unit
Tire Pressure
To select the tire pressure unit. (psi, kPa, bar)
Unit
9. ECO vehicle
Items
Explanation
ś Enable Coasting Guide : On/Off
To inform driver when taking foot off from accelerator pedal
by getting information from Navigation system.
Coasting Guide
ś Sound
To adjust the sound of coasting guide.
ś Early/Normal/Late
Start Coasting
To select options when Coasting Pop-up is displayed.
4-36
04
10. Language (if equipped)
Items
Explanation
Choose the language. You can choose the language in infotain-
Language
ment system. (if equipped)
11. Reset
Items
Explanation
You can reset the menus in the User Settings Mode. All menus in
Reset
the User Settings Mode are reset to factory settings, except language
and service interval.
4-37
Instrument Cluster
Trip Computer
The trip computer is a microcomputer-
controlled driver information system that
displays information related to driving.
Information
Some driving information stored in the
trip computer (for example Average
Vehicle Speed) resets if the battery
connector is disconnected.
ODN8A069203
To change the trip mode, toggle the “
,
Trip modes
” switch on the steering wheel.
Fuel Economy
Average fuel economy/
ś Average Fuel Economy
Instant fuel economy
ś Instant Fuel Economy
Accumulated Info
ś Tripmeter
ś Average Fuel Economy
ś Elapsed Time
Drive Info
ś Tripmeter
OCN7040045N
ś Average Fuel Economy
Average Fuel Economy (1)
ś Elapsed Time
ś The average fuel economy is
calculated by the total driving
distance and fuel consumption since
the last average fuel economy reset.
Digital Speedometer
ś The average fuel economy can
be reset both manually and
automatically.
Auto Stop (if equipped)
ś Auto Stop accumulated
time
Smart Shift
4-38
04
Manual reset
Accumulated Info display
To clear the average fuel economy
manually, press the OK button on the
steering wheel for more than 1 second
when the average fuel economy is
displayed.
Automatic reset
To automatically reset the average fuel
economy after refueling, select the "Fuel
Econ. Reset" mode in the User Settings
menu on the LCD display.
OCN7040085N
- After Ignition: When the engine has
been OFF for 4 hours or longer the
This display shows the accumulated trip
average fuel economy will reset
distance (1), the average fuel economy
automatically.
(2), and the total driving time (3).
- After Refueling: The average fuel
The information is accumulated starting
economy will reset automatically after
from the last reset.
adding 1.6 gallons (6 liters) of fuel or
To reset the information, press and
more and after driving speed exceeds
hold the OK button when viewing the
1 mph (1 km/h).
Accumulated driving info. The trip
distance, the average fuel economy,
and total driving time will reset
Information
simultaneously.
The vehicle must be driven for a minimum
The accumulated driving information will
of 0.19 miles (300 meters) since the last
continue to be counted while the engine
ignition key cycle before the average fuel
is still running (for example, when the
economy will be recalculated.
vehicle is in traffic or stopped at a stop
light).
Instant Fuel Economy (2)
The instantaneous fuel economy is
Information
displayed according to the bar graph in
the LCD display while driving.
The vehicle must be driven for a minimum
of 300 meters (0.19 miles) since the last
ignition key cycle before the average fuel
economy will be recalculated.
4-39
Instrument Cluster
Drive Info display
Digital speedometer
OCN7040086N
OIK047151N
This display shows the trip distance (1),
The digital speedometer display shows
the average fuel economy (2), and the
the speed of the vehicle.
total driving time (3).
The information is combined for each
Auto Stop accumulated time
ignition cycle. However, when the engine
has been OFF for 4 hours or longer the
Drive Info screen will reset.
To manually reset the information, press
and hold the OK button when viewing
the Drive Info. The trip distance, the
average fuel economy, and total driving
time will reset simultaneously.
The driving information will continue
to be counted while the engine is still
running (for example, when the vehicle is
in traffic or stopped at a stop light).
ODN8A049036
This mode displays the Auto Stop
accumulated time within ISG vehicles.
Information
The vehicle must be driven for a minimum
of 0.19 miles (300 meters) since the last
ignition key cycle before the average fuel
economy will be recalculated.
4-40
04
Smart shift
ODN8059274L
This mode displays the currently selected
drive mode.
For more information, refer to "Drive
Mode Integrated Control System'' in
chapter 6.
4-41
Instrument Cluster
/&' ',63/$< ǣ7<3( %Ǥ
LCD Display Control
Type A
Type B
OCN7040023L
The LCD display modes can be changed by using the control buttons.
Switch
Operation
Function
Tap
MODE button for changing view modes
Tap
MOVE switch for changing items
,
Tap
SELECT/RESET button for setting the selected item
OK
SELECT/RESET button for retrieving assist information or
Tap and hold
resetting the selected item
Information
When the infotainment system is applied, only the User’s Setting mode on the
infotainment system is supported but the User’s Setting mode on the instrument cluster is
not supported.
4-42
04
View Modes
View Modes
Explanation
The Utility group displays driving information such as the trip
Utility group
distance, fuel economy and etc.
Driving assist group
The Driving Assist mode displays the driving status.
Navigation group
This mode displays the state of the navigation.
Display for 4 seconds when the vehicle mode changes from
Driving info. group
IGN ON to OFF.
The information provided may differ depending on which functions are applicable
to your vehicle.
4-43
Instrument Cluster
Utility Group
Accumulated Information
The Utility group displays information
The vehicle information such as trip
related to vehicle driving parameters
distance, fuel economy (undisplayed
including fuel economy and trip distance
item in fuel economy: driving speed)
and trip time is displayed after manual
information.
initialization.
Utility Items
Digital Speed Display
The utility items appear as well in utility
view mode, driving assist view mode and
It shows current vehicle speed.
turn by turn view mode. The utility items
in utility view mode display in the center
Auto Stop accumulated time
of the instrument cluster but the items in
This mode displays the Auto Stop
other modes show up on the right side of
accumulated time within ISG vehicles.
the instrument cluster.
The information provided may differ
Driver Attention Warning
depending on which functions are
Display the status of the Driver Attention
applicable to your vehicle
Warning system. When the engine is
off or the vehicle comes to a stop, the
Driving Information
system is reset. Press and hold OK button
The trip distance for each ignition cycle,
to initialize set up.
fuel economy (undisplayed item in fuel
economy: driving speed), trip time
Tire pressure
are shown. Press and hold OK button
to initialize set up. When the engine
Smart shift
has been OFF for 4 hours or longer
the average fuel economy will reset
automatically.
Information after Refueling
The vehicle information such as trip
distance, fuel economy (undisplayed
item in fuel economy: driving speed)
and trip time is displayed after refueling.
Press and hold OK button to initialize set
up.
4-44
04
Driving Assist group
Driving info. group
OCN7040082N
OCN7040083N
SCC/LKA/LFA/DAW
Driving information summary (1)
This group displays the state of Smart
The current operation conditions of the
Cruise Control, Lane Following Assist and
Cruise Control mode, Smart
Highway Driving Assist.
Cruise Control and Highway Driving
For more details, refer to each function
Assist modes.
information in chapter 7.
Navigation group
OCN7040042N
Driving information summary (2)
OCN7040023L
The current operation conditions of
It shows the information by interworking
the Cruise Control mode, Smart Cruise
with the navigation.
Control and Highway Driving Assist
modes.
4-45
Instrument Cluster
Warning message group
Shift to P to edit settings / Engage parking
brake to edit settings
When the warning message light
appears, check the detailed information
This warning message illuminates if
in warning message group.
you try to select an item from the User
Settings mode while driving.
User Settings Mode
ś Intelligent variable transmission
In this mode, you can change the
For your safety, change the User
settings of the instrument cluster, doors,
Settings after parking the vehicle,
lamps, etc.
applying the parking brake and
moving the shift level to P(Park).
1. Driver Assistance
ś Manual transmission
2. Door
For your safety, change the User
3. Lights
Settings after engaging the parking
4. Sound
brake.
5. Convenience
6. Service interval
Quick guide (Help)
7. Theme selection
This mode provides quick guides for the
systems in the User Settings mode.
8. Other
Select an item, press and hold the OK
9. ECO vehicle
button.
10. Language
For more details about each system,
11. Reset
refer to this Owner’s Manual.
The information provided may differ
depending on which functions are
applicable to your vehicle.
4-46
04
1.
Driver Assistance
Items
Explanation
ś Highway Driving Assist: The function assists the driver to maintain
Driving
the set speed, keep a safe distance with a vehicle ahead and help
Assist
keep the vehicle inside of the lane while driving on the highway.
For more details, refer to the "Highway Driving Assist (HDA)" in chapter 7.
Warning
To adjust the warning timing of the driver assistance system.
Timing
ś Normal / Late
Warning
To adjust the warning volume of the driver assistance system.
Volume
ś High / Medium / Low / Off
ś Leading Vehicle Departure Alert
To activate or deactivate Leading vehicle departure alert.
Driver
ś Inattentive Driving Warning
Attention
Warning
To activate or deactivate Driver Attention Warning.
For more details, refer to the “Driver Attention Warning (DAW)” in
chapter 7.
To adjust Forward Collision-Avoidance Assist function.
Forward
ś Active Assist/Warning only/Off
Safety
For more details, refer to the "Forward Collision-Avoidance Assist
(FCA)" in chapter 7.
To adjust Lane Keeping Assist.
Lane Safety
ś Lane Keeping Assist/Lane Departure Warning/Off
For more details, refer to "Lane Keeping Assist (LKA)" in chapter 7.
ś Safe Exit Assist (SEA)
To activate or deactivate Safe Exit Assist.
Blind-Spot
For more details, refer to the “Safe Exit Assist (SEA)” in chapter 7.
Safety
(if equipped)
ś Active Assist/Warning only/Off
For more details, refer to “Blind-Spot Collision-Avoidance Assist
(BCA)” in chapter 7.
ś Rear Cross-Traffic Safety
Parking
To Activate or deactivate Rear Cross-Traffic Collision-Avoidance Assist.
Safety
ś Active Assist/Warning only/Off
(if equipped)
For more details, refer to “Rear Cross-Traffic Collision-Avoidance
Assist (RCCA)” in chapter 7.
4-47
Instrument Cluster
2. Door
Items
Explanation
ś Enable on Shift: All doors will be automatically locked if the shift
lever is moved from the P (Park) position to the R (Reverse), N
(Neutral), or D (Drive) position. (Only when the engine is running)
Auto Lock
ś Enable on Speed: All doors will be automatically locked when the
vehicle speed exceeds 15km/h (9.3mph).
ś Disable : The auto door lock operation will be deactivated.
ś On Shift to P: All doors will be automatically unlocked if the shift
lever is moved to P (Park) position. (Only when the engine is
running)
Auto Unlock
ś On key out/Vehicle Off : All doors will be automatically
unlockedwhen the ignition key is removed from the ignition switch
or the Engine Start/Stop button is set to the OFF position.
ś Disable : The auto door unlock operation will be canceled.
ś Off: The two press unlock function will be deactivated. Therefore, all
doors will unlock if the door unlock button is pressed.
Two Press
ś On: Only the driver’s door will unlock if the door unlock button is
Unlock
pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
To activate or deactivate the horn feedback.
If the horn feedback is activated, after locking the door by pressing the
Horn
lock button on the remote key, and pressing it again within 4 seconds,
Feedback
the horn feedback sound will operate once to indicate that all doors
are locked (if equipped with remote key).
To activate or deactivate the smart trunk.
Smart Trunk
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items
Explanation
To adjust the illumination level.
Illumination
- Level 1~20
ś Off: The one touch turn signal function will be deactivated.
One Touch
ś
3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
Turn Signal
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight
ś To activate or deactivate the headlight delay function.
Delay
For more details, refer to “Lighting” in chapter 5.
High Beam
ś To activate or deactivate the High Beam Assist.
Assist
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
4-48
04
4. sound
Items
Explanation
Cluster
Voice
To adjust the cluster voice guidance volume.
Guidance
Volume
Welcome
To activate or deactivate the welcome sound.
sound
5. Convenience
Items
Explanation
ś Off: The seat easy access function is deactivated.
ś Normal/Extended: When you turn off the engine, the driver’s seat
Seat Easy
will automatically move rearward short (Normal) or long (Extended)
Access
for you to enter or exit the vehicle more comfortably.
For more details, refer to “Driver Position Memory System” in
chapter 5.
Rear
ś To activate or deactivate the rear occupant alert system.
Occupant
For more details, refer to the “Rear Occupant Alert (ROA)" in chapter
Alert
5.
ś On door unlock: The welcome light turns on automatically when the
doors are unlocked.
Welcome
ś On driver approach: The welcome light turns on automatically when
Light
the vehicle is approached with the smart key.
For more details, refer to ‘’Welcome System’’ in chapter 5.
Wireless
To activate or deactivate the wireless charging system in the front seat.
Charging
For more details, refer to “Wireless cellular phone charging system”
System
in chapter 5.
To activate or deactivate the traffic information.
Traffic
When activated, the traffic information will be displayed on the LCD
Information
display. (for cluster type B)
Tunnel Entry
Automatically adjusts climate controls upon entering a tunnel.
Assist
Icy Road
To activate or deactivate the icy road warning function.
Warning
4-49
Instrument Cluster
6. Service interval
Items
Explanation
Enable
Service
To activate or deactivate the service interval function.
Interval
To use the service interval menu, consult an authorized HYUNDAI dealer.
If the service interval is activated and the time and distance is adjusted, messages are
displayed in the following situations each time the vehicle is turned on.
- Service in
: Displayed to inform the driver the remaining mileage and days to service.
- Service required
: Displayed when the mileage and days to service has been reached or passed.
Information
If any of the following conditions occur, the mileage and number of days to service may be
incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
7. Theme selection
To select the style of instrument cluster graphic style and setting.
ś Theme A / Theme B / Theme C
ś Link to Drive Mode
4-50
04
8. Other
Items
Explanation
ś At vehicle start : This displays the average fuel economy after
restarting.
Reset fuel
ś After refueling : This displays the average fuel economy after
economy
refueling.
ś Manually : You can calculate the accumulated average fuel
economy manually.
ś Off: The average fuel economy will not reset automatically
whenever refueling.
ś After ignition: When the engine has been OFF for 4 hours or longer
Fuel Econ.
the average fuel economy will reset automatically.
Reset
ś After refueling: The average fuel economy will reset automatically
after adding 6 liters (1.6 gallons) of fuel or more and after driving
speed exceeds 1 km/h (1 mph).
For more details, refer to “Trip Computer” in this chapter.
Speed Unit
To select the speed unit. (km/h, MPH)
(if equipped)
Fuel Econ.
To select the fuel economy unit. (km/L, L/100km, MPG)
Unit
Temperature
To select the temperature unit. (°C,°F)
Unit
Tire Pressure
To select the tire pressure unit. (psi, kPa, bar)
Unit
9. ECO vehicle
Items
Explanation
ś Enable Coasting Guide : On/Off
To inform driver when taking foot off from accelerator pedal
by getting information from Navigation system.
Coasting Guide
ś Sound
To adjust the sound of coasting guide.
ś Early/Normal/Late
Start Coasting
To select options when Coasting Pop-up is displayed.
4-51
Instrument Cluster
10. Language (if equipped)
Items
Explanation
Choose the language. You can choose the language in infotainment
Language
system. (if equipped)
11. Reset
Items
Explanation
You can reset the menus in the User Settings Mode. All menus in the
Reset
User Settings Mode are reset to factory settings, except language and
service interval.
4-52
5. Convenience Features
Accessing Your Vehicle
5-4
Remote Key
5-4
Smart Key
5-7
Immobilizer System
5-14
Hyundai Digital Key
5-15
Door Locks
5-31
Operating Door Locks from Outside the Vehicle
5-31
Operating Door Locks from Inside the Vehicle
5-33
Automatic Door Lock and Unlock Features
5-35
Child-Protector Rear Door Locks
5-35
Rear Occupant Alert (ROA)
5-36
Rear Occupant Alert Operation
5-36
Theft-Alarm System
5-37
Driver Position Memory System
5-38
Storing Memory Positions
5-38
Recalling Memory Positions
5-38
Driver Position Memory System Reset
5-39
Easy Access Function
5-40
5
Steering Wheel
5-41
Motor Driven Power Steering (MDPS)
5-41
Tilt Steering / Telescope Steering
5-42
Horn
5-43
Mirrors
5-44
Inside Rearview Mirror
5-44
Side View Mirrors
5-52
Windows
5-54
Power Windows
5-55
Sunroof
5-58
Sunshade
5-58
Tilt Open/Close
5-59
Slide Open/Close
5-59
Automatic Reversal
5-60
Resetting the Sunroof
5-61
Sunroof Open Warning
5-61
Hood
5-62
Trunk
5-64
Emergency Trunk Safety Release
5-65
Smart Trunk Release
5-66
Fuel Filler Door
5-69
Exterior Lights
5-72
Lighting Control
5-72
High Beam Operation
5-73
Turn Signals and Lane Change Signals
5-74
Battery Saver Function
5-75
Headlight Delay Function
5-75
High Beam Assist (HBA)
5-76
Detecting Sensor (Front view camera)
5-76
Function Settings
5-76
Function Operation
5-77
High Beam Assist Malfunction and Limitations
5-77
Interior Lights
5-79
Interior Lamp AUTO Cut
5-79
5
Front Lamps
5-79
Mood lamp
5-80
Room Lamp
5-80
Luggage Compartment Lamp
5-81
Vanity Mirror Lamp
5-81
Welcome System
5-82
Wipers and Washers
5-83
Windshield Wipers
5-83
Windshield Washers
5-84
Automatic Climate Control System
5-85
Automatic Heating and Air Conditioning
5-86
Manual Heating and Air Conditioning
5-87
System Operation
5-93
System Maintenance
5-95
Windshield defrosting and defogging
5-97
Automatic Climate Control System
5-97
Defogging Logic
5-98
Auto Defogging System
5-99
Defroster
5-100
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст