Hyundai Elantra GT (2018 year). Instruction — part 18
Driving your vehicle
DRIVER ATTENTION ALERT SYSTEM (DAA, IF EQUIPPED)
The Driver Attention Alert (DAA) sys-
•
The driver can select the mode of
Driver's attention level
tem displays the condition of the dri-
the Driver Attention Alert system.
■ System off
ver's fatigue level and inattentive
- Off
: The Driver Attention Alert
driving practices.
system is deactivated.
- Normal
: The Driver Attention
System Setting and Activation
Alert system helps alert the driv-
er of his/her fatigue level or inat-
System setting
tentive driving practices.
• The Driver Attention Alert system
- Early : The Driver Attention Alert
is set to be in the OFF position,
system helps alert the driver of
when your vehicle is first delivered
OPDE056125
his/her fatigue level or inattentive
■ Attentive driving
to you from the factory.
driving practices faster than
• To turn ON the Driver Attention
Normal mode.
Alert system, turn on the engine,
•
The set-up of the Driver Attention
and then select 'User Settings →
Alert system will be maintained, as
Driving Assist → Driver Attention
selected, when the engine is re-
Alert → Normal/Early' on the LCD
started.
display.
OPDE056061
■ Inattentive driving
OPDE056062
5-82
•
The driver can monitor their driving
Take a break
Resetting the System
conditions on the LCD display.
•
The last break time is set to 00:00
The DAA screen will appear when
and the driver's attention level is
you select the Assist mode tab (
)
set to 5 (very attentive) when the
on the LCD display if the system is
driver resets the Driver Attention
activated.
(For more information,
Alert system.
refer to "LCD Display Modes" in
•
The Driver Attention Alert system
chapter 3.)
resets in the following situations.
•
The driver's attention level is dis-
- The engine is turned OFF.
played on the scale of 1 to 5. The
- The driver unfastens the seat belt
lower the number is, the more inat-
and then opens the driver's door.
tentive the driver is.
- The vehicle is stopped for more
•
The number decreases when the
OPDE056063
driver does not take a break for a
than 10 minutes.
5
•
The "Consider taking a break"
certain period of time.
•
The Driver Attention Alert system
message appears on the LCD dis-
•
The number increases when the
operates again, when the driver
play and a warning sounds in order
restarts driving.
driver attentively drives for a cer-
to suggest the driver to take a
tain period of time.
break, when the driver’s attention
•
When the driver turns on the sys-
level is below 1.
tem while driving, it displays 'Last
•
The Driver Attention Alert system
Break time' and level.
does not suggest the driver to take
a break, when the total driving time
is shorter than 10 minutes.
5-83
Driving your vehicle
System Standby
System Malfunction
WARNING
•
The Driver Attention Alert
system is not a substitute for
safe driving practices, but a
convenience function only. It
is the responsibility of the
driver to always drive cau-
tiously to prevent unexpected
and sudden situations from
occurring. Pay attention to the
road conditions at all times.
OPDE056126
OPDE057065N
•
The system may suggest a
break according to the dri-
The Driver Attention Alert system
Check Driver Attention Alert sys-
ver's driving pattern or habits
enters the ready status and displays
tem
even if the driver doesn't feel
the 'Standby' screen in the following
When the warning message
fatigue.
situations.
appears, the system is not working
•
The driver, who feels fatigued,
- The camera does not detect the
properly. In this case, have the vehi-
should take a break, even
lanes.
cle inspected by an authorized
though there is no break sug-
HYUNDAI dealer.
- Driving speed remains under 40
gestion by the Driver Attention
mph (60 km/h) or over 125 mph
Alert system.
(200 km/h).
5-84
NOTICE
CAUTION
(Continued)
The Driver Attention Alert system
•
The vehicle drives through a
utilizes the camera sensor on the
The Driver Attention Alert sys-
windy area.
front windshield for its operation.
tem may not properly operate
•
The vehicle is controlled by the
To keep the camera sensor in the
with limited alerting in the fol-
following driving assist sys-
best condition, you should
lowing situations:
tems:
observe the followings:
•
The lane detection perform-
- Lane Keeping Assist System
•
NEVER install any accessories
ance is limited. (For more infor-
(LKAS)
or stickers on the front wind-
mation, refer to "Lane Keeping
- Automatic Emergency Braking
shield, nor tint the front wind-
Assist System (LKAS)" in this
(AEB) System
shield.
chapter.)
- Smart Cruise Control (SCC)
•
NEVER locate any reflective
•
The vehicle is violently driven
System
objects (i.e. white paper, mirror)
or is abruptly turned for obsta-
over the dashboard. Any light
cle avoidance (e.g. construc-
5
reflection may cause a malfunc-
tion area, other vehicles, fallen
tion of the Driver Attention Alert
objects, bumpy road).
CAUTION
(DAA) system.
•
Forward drivability of the vehi-
Playing the vehicle audio sys-
•
Pay extreme caution to keep the
cle is severely undermined
tem at high volume may offset
camera sensor out of water.
(possibly due to wide variation
the Driver Attention Alert sys-
in tire pressures, uneven tire
•
NEVER arbitrarily disassemble
tem warning sounds.
wear-out, toe-in/toe-out align-
the camera assembly, nor apply
ment).
any impact on the camera
assembly.
•
The vehicle drives on a curvy
road.
•
The vehicle drives on a bumpy
road.
(Continued)
5-85
Driving your vehicle
CRUISE CONTROL
Cruise Control operation
WARNING
(Continued)
•
Do not use when:
Take the following precautions:
- Driving in heavy traffic or
•
Always set the vehicle speed
when traffic conditions make
under the speed limit.
it difficult to drive at a con-
•
If the Cruise Control is left on,
stant speed
(cruise indicator light in the
- Driving on rainy, icy, or
instrument cluster is illumi-
snow-covered roads
nated) the Cruise Control can
- Driving on hilly or windy
be activated unintentionally.
roads
Keep the Cruise Control sys-
- Driving in windy areas
tem off (cruise indicator light
OPD047149L
OFF) when the Cruise Control
- Driving with limited view
is not in use, to avoid inadver-
(possibly due to bad weather
1. Cruise indicator
tently setting a speed.
such as fog, snow, rain and
2. SET indicator
sandstorm)
•
Use the Cruise Control sys-
tem only when traveling on
The Cruise Control system allows
open highways in good
NOTICE
you to drive at speeds above 20 mph
weather.
(30 km/h) without depressing the
During cruise-speed driving of a
•
Do not use the Cruise Control
accelerator pedal.
manual transmission vehicle, do
when it may be unsafe to keep
not shift into neutral without
the vehicle at a constant
depressing the clutch pedal, since
speed.
the engine will be overrevved. If
(Continued)
this happens, depress the clutch
pedal or press the cruise control
ON / OFF button.
5-86
To set Cruise Control speed
i
Information
•
During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
•
Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. Depress the brake
OPD056068
pedal at least once after turning ON
3. Push the toggle switch down
the ignition or starting the engine.
OPD056067
(SET-), and release it. The SET
5
1. Press the CRUISE button on the
indicator light will illuminate.
steering wheel to turn the system
4. Release the accelerator pedal.
on. The cruise indicator will illumi-
nate.
i
Information
2. Accelerate to the desired speed,
which must be more than 20 mph
On a steep slope, the vehicle may
(30 km/h).
slightly slow down or speed up, while
driving uphill or downhill.
i
Information - Manual trans-
mission
For manual transmission vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
5-87
Driving your vehicle
To increase Cruise Control
• Depress the accelerator pedal.
To decrease Cruise Control
speed
When the vehicle attains the
speed
desired speed, push the toggle
switch down (SET-).
OPD056069
OPD056068
• Push the toggle switch up (RES+)
• Push the toggle switch down (SET-)
and hold it, while monitoring the
and hold it.Your vehicle will gradual-
SET speed on the instrument clus-
ly slow down. Release the toggle
ter.
switch at the speed you want to
Release the toggle switch when
maintain.
the desired speed is shown and
• Push the toggle switch down (SET-)
the vehicle will accelerate to that
and release it immediately. The
speed.
cruising speed will decrease
1.0
mph (1.6 km/h) each time the toggle
• Push the toggle switch up (RES+)
switch is operated in this manner.
and release it immediately. The
cruising speed will increase
1.0
• Lightly tap the brake pedal. When
mph (1.6 km/h) each time the tog-
the vehicle attains the desired
gle switch is operated in this man-
speed, push the toggle switch
ner.
down (SET-).
5-88
To temporarily accelerate with
Cruise Control will be canceled
• The ESC
(Electronic Stability
the Cruise Control ON
when:
Control) is operating.
Depress the accelerator pedal. When
• Downshifting to the
2nd gear in
you take your foot off the accelerator,
manual shift mode. (for automatic
the vehicle will return to the previ-
transmission/dual clutch transmis-
ously set speed.
sion vehicle)
If you push the toggle switch down
(SET-) at the increased speed, the
i
Information
Cruise Control will maintain the
Each of the above actions will cancel
increased speed.
Cruise Control operation (the "SET"
indicator in the instrument cluster will
go off), but only pressing the CRUISE
button will turn the system off. If you
OPD056070
wish to resume Cruise Control opera-
5
tion, push the toggle switch up (RES+)
•
Depressing the brake pedal.
located on your steering wheel. You
•
Depressing the clutch pedal.
will return to your previously preset
(for manual transmission vehicle)
speed, unless the system was turned off
•
Pressing the CANCEL button
using the CRUISE button.
located on the steering wheel.
•
Pressing the CRUISE button. Both
the cruise indicator and the "SET"
indicator will turn OFF.
•
Moving the shift lever into N
(Neutral).(for automatic transmis-
sion/ dual clutch transmission vehi-
cle)
•
Decreasing the vehicle speed to
less than approximately
20 mph
(30 km/h).
5-89
Driving your vehicle
To resume preset Cruising
To turn Cruise Control off
speed
OPD056067
OPD056069
• Press the CRUISE button
(the
Push the toggle switch up (RES+). If
cruise indicator light will go off).
the vehicle speed is over 20 mph (30
• Turn the vehicle OFF.
km/h), the vehicle will resume the
preset speed.
5-90
ADVANCED SMART CRUISE CONTROL SYSTEM (IF EQUIPPED)
The Smart Cruise Control System
WARNING
allows you to program the vehicle to
maintain constant speed and mini-
Take the following precautions :
mum distance between the vehicle
ahead.
•
Always set the vehicle speed
under the speed limit.
The Smart Cruise Control System
will automatically adjust your vehicle
•
If the Smart Cruise Control is
speed to maintain your programmed
left on,
(cruise
(
)
speed and following distance without
indicator light in the instru-
requiring you to depress the acceler-
ment cluster is illuminated)
ator or brake pedals.
the Smart Cruise Control can
OAE056097N
be activated unintentionally.
Keep the Smart Cruise
➀ Cruise indicator
WARNING
Control System off
(cruise
➁ Set speed
5
(
) indicator light
For your safety, please read the
➂ Vehicle-to-vehicle distance
OFF) when the Smart Cruise
owner's manual before using the
Control is not in use, to avoid
Smart Cruise Control system.
inadvertently setting a speed.
To see the SCC screen on the LCD
display in the cluster, select Assist
•
Use the Smart Cruise Control
mode (
). For more details, refer to
System only when traveling
WARNING
"LCD Display Modes" in chapter 3.
on open highways in good
weather.
The Smart Cruise Control
System is not a substitute for
(Continued)
safe driving practices, but a
convenience function only. It is
the responsibility of the driver
to always check the speed and
distance to the vehicle ahead.
5-91
Driving your vehicle
Smart Cruise Control Speed
(Continued)
To set Smart Cruise Control
•
Do not use the Smart Cruise
speed
Control when it may not be
safe to keep the vehicle at a
constant speed.
•
Do not use when:
- Driving in heavy traffic or
when traffic conditions make
it difficult to drive at a con-
stant speed
OPD056068
- Driving on rainy, icy, or
snow-covered roads
3. Push the toggle switch down
(SET-). The Set Speed and
- Driving on a steep downhill
Vehicle-to-Vehicle Distance on the
or uphill
OPD056067
LCD display will illuminate.
- Driving in windy areas
1. Push the CRUISE button on the
4. Release the accelerator pedal.
- Driving in parking lots
steering wheel to turn the system
The desired speed will automati-
- Driving near crash barriers
on. The cruise (
) indi-
cally be maintained.
- Driving on a sharp curve
cator will illuminate.
If there is a vehicle in front of you, the
- Driving with limited view
2. Accelerate to the desired speed.
speed may decrease to maintain the
(possibly due to bad weath-
The Smart Cruise Control speed
distance to the vehicle ahead.
er, such as fog, snow, rain or
can be set as follows:
On a steep grade, the vehicle may
sandstorm)
slow down or speed up slightly while
• 20 - 110 mph (30 -180 km/h) :
- The vehicle's sensing ability
going uphill or downhill.
when there is no vehicle in front
decreases due to vehicle
• 0
- 110 mph (0 -180 km/h) :
modification, resulting in a
when there is a vehicle in front
i
Information
level difference of the vehi-
cle's front and rear
Vehicle speed may decrease on an
upward slope and increase on a down-
ward slope.
5-92
To increase Smart Cruise
To decrease the Smart Cruise
CAUTION
Control set speed
Control set speed
Check the driving condition
before using the toggle switch.
Driving speed sharply increas-
es, when you push up and hold
the toggle switch.
OPD056069
OPD056068
5
Follow either of these procedures:
Follow either of these procedures:
• Push the toggle switch up (RES+),
• Push the toggle switch down
and release it immediately. The
(SET-), and release it immediately.
cruising speed will increase by
The cruising speed will decrease
1 mph (1 km/h) each time you
by 1 mph (1 km/h) each time you
move the toggle switch up in this
move the toggle switch down in
manner.
this manner.
• Push the toggle switch up (RES+),
• Push the toggle switch down
and hold it. Your vehicle set speed
(SET-), and hold it. Your vehicle set
will increase by 5 mph (10 km/h).
speed will decrease by 5 mph (10
Release the toggle switch at the
km/h). Release the toggle switch
speed you want.
at the speed you want.
• You can set the speed to 20 mph
(30 km/h).
5-93
Driving your vehicle
To temporarily accelerate with
Smart Cruise Control set speed
Canceled automatically
the Smart Cruise Control on
will be temporarily canceled
•
The driver's door is opened.
If you want to speed up temporarily
when:
•
The vehicle is shifted to N (Neutral),
when the Smart Cruise Control is on,
R (Reverse) or P (Park).
depress the accelerator pedal.
•
The EPB (Electronic Parking Brake)
Increased speed will not interfere
is applied.
with Smart Cruise Control operation
•
The vehicle speed is over 120 mph
or change the set speed.
(190 km/h).
To return to the set speed, take your
•
The vehicle stops on a steep incline.
foot off the accelerator pedal.
•
The ESC
(Electronic Stability
If you push the toggle switch down
Control), TCS
(Traction Control
(SET-) at increased speed, the cruis-
System) or ABS is operating.
ing speed will be set again pedal.
•
The ESC is turned off.
i
Information
OPD056070
•
The sensor or the cover is dirty or
blocked with foreign matter.
Be careful when accelerating tem-
Canceled manually
•
The vehicle is stopped for a certain
porarily, because the speed is not con-
• Depressing the brake pedal.
period of time.
trolled automatically at this time even
• Pressing the CANCEL button
if there is a vehicle in front of you.
•
The vehicle stops and goes repeat-
located on the steering wheel.
edly for a long period of time.
The Smart Cruise Control turns off
•
The accelerator pedal is continuous-
temporarily when the Set Speed and
ly depressed for a long period of
Vehicle-to-Vehicle Distance indicator
time.
on the LCD display turns off.
• The engine performance is abnor-
The cruise (
) indicator is
mal.
illuminated continuously.
5-94
•
The driver starts driving by pushing
To resume Smart Cruise Control
i
Information
the toggle switch up (RES+)/down
set speed
(SET-) or depressing the accelera-
If the Smart Cruise Control is canceled
If any method other than the cruise
tor pedal, after the vehicle is
by other than the reasons mentioned,
toggle switch was used to cancel
stopped by the Smart Cruise
have the system checked by an author-
cruising speed and the system is still
Control System with no other vehi-
ized HYUNDAI dealer.
activated, the cruising speed will
cle ahead.
automatically resume when you
•
The driver starts driving by pushing
push the toggle switch up (RES+) or
the toggle switch up (RES+)/down
down (SET-).
(SET-) or depressing the accelera-
If you push the toggle switch up
tor pedal, after stopping the vehicle
(RES+), the speed will resume to the
with a vehicle stopped far away in
recently set speed. However, if vehi-
front.
cle speed drops below 20 mph (30
•
The AEB is activated.
km/h), it will resume when there is a
5
Each of these actions will cancel
vehicle in front of your vehicle.
the Smart Cruise Control opera-
tion. The Set Speed and Vehicle-to-
i
Information
Vehicle Distance on the LCD dis-
OAEE056165N
Always check the road conditions
play will go off.
Smart Cruise Control canceled
when you push the toggle switch up
In a condition the Smart Cruise
If the system is cancelled, the warn-
(RES+) to resume speed.
Control is cancelled automatically,
ing chime will sound and a message
the Smart Cruise Control will not
will appear for a few seconds.
resume even though the RES+ or
You must adjust the vehicle speed by
SET- toggle switch is pushed.
depressing the accelerator or brake
pedal according to the road condition
ahead and driving condition.
Always check the road conditions.
Do not rely on the warning chime.
5-95
Driving your vehicle
To turn Cruise Control off
Smart Cruise Control Vehicle-
Each time the button is pressed, the
to-Vehicle Distance
vehicle to vehicle distance changes
as follows:
To set Vehicle-to-Vehicle
Distance
Distance 4
Distance 3
Distance 2
Distance 1
For example, if you drive at 56 mph
(90 km/h), the distance is maintained
as follows:
OPD056067
Distance 4 - approximately 172 feet
• Press the CRUISE button
(the
Distance 3 - approximately 130 feet
cruise (
) indicator light
Distance 2 - approximately 106 feet
will go off).
OPD056083
Distance 1 - approximately 82 feet
When the Smart Cruise Control
System is ON, you can set and main-
i
Information
tain the distance from the vehicle
The distance is set to the last set dis-
ahead of you without pressing the
tance when the system is used for the
accelerator or brake pedal.
first time after starting the engine.
5-96
When the lane ahead is clear:
When there is a vehicle ahead
WARNING
of you in your lane:
Distance 4
Distance 3
OPDE056089R
OPDE056084R
Distance 2
Distance 1
When using the Smart Cruise
5
The vehicle speed will maintain the
OPDE056085R/OPDE056086R/OPDE056087R/OPDE056088R
Control System:
set speed.
• Your vehicle speed will slow down
• The warning chime sounds
or speed up to maintain the select-
and the Vehicle-to Vehicle
ed distance.
Distance indicator blinks if
• If the vehicle ahead speeds up,
the vehicle is unable to main-
your vehicle will travel at a steady
tain the selected distance
cruising speed after accelerating to
from the vehicle ahead.
the set speed.
• If the warning chime sounds,
depress the brake pedal or
use the steering wheel to
actively adjust the vehicle
speed, and the distance to the
vehicle ahead.
(Continued)
5-97
Driving your vehicle
In traffic situation
(Continued)
CAUTION
• Even if the warning chime is
not activated, always pay
attention to the driving condi-
tions to prevent dangerous
situations from occurring.
• Playing the vehicle audio sys-
tem at high volume may offset
the system warning sounds.
OPDE056090
OPDE056091
If the vehicle ahead
(vehicle
Use switch or pedal to accelerate
speed: less than 20 mph (30
km/h)) disappears to the next
• In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if
lane, the warning chime will
sound and a message "Watch
the vehicle ahead of you starts
moving, your vehicle will start as
for surrounding vehicles" will
appear. Adjust your vehicle
well. However, if the vehicle stops
for more than 3 seconds, you must
speed for vehicles or objects
that can suddenly appear in
depress the accelerator pedal or
push up the toggle switch
(RES+)
front of you by depressing the
brake pedal.
or push down the toggle switch
(SET-) to start driving.
Always pay attention to the road
condition ahead.
5-98
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст