Hyundai Elantra GT (2018 year). Instruction — part 19
• If you push the advanced smart
Sensor to Detect Distance to
Warning message
cruise control toggle switch (RES+
the Vehicle Ahead
or SET-) while Auto Hold and
advanced smart cruise control is
operating the Auto Hold will be
released regardless of accelerator
pedal operation and the vehicle will
start to move. The AUTO HOLD
indicator changes from green to
white.
OAE056166L
OPDE056039
5
Smart Cruise Control disabled.
The Smart Cruise Control uses a
Radar blocked
sensor to detect distance to the vehi-
When the sensor lens cover is
cle ahead.
blocked with dirt, snow, or debris, the
Smart Cruise Control System opera-
tion may stop temporarily. If this
occurs, a warning message will
appear on the LCD display. Remove
any dirt, snow, or debris and clean
the radar sensor lens cover before
operating the Smart Cruise Control
System. The Smart Cruise Control
system may not properly activate, if
the radar is totally contaminated, or if
any substance is not detected after
turning on the engine
(e.g. in an
open terrain).
5-99
Driving your vehicle
i
Information
(Continued)
For the SCC operation is temporarily
•
Be careful not to apply unnec-
stopped if the radar is blocked, but
essary force on the radar sen-
you wish to use conventional cruise
sor or sensor cover. If the sen-
control mode (speed only control func-
sor is forcibly moved out of
tion), you must convert to the cruise
proper alignment, the Smart
control mode (refer to "To convert to
Cruise Control System may
Cruise Control mode" in the following
not operate correctly. In this
page.
case, a warning message may
not be displayed. Have the
vehicle inspected by an
CAUTION
OAE056167L
authorized HYUNDAI dealer.
Check Smart Cruise Control System
•
If the front bumper becomes
•
Do not apply license plate
damaged in the area around
The message will appear when the
frame or foreign objects such
the radar sensor, the Smart
vehicle to vehicle distance control
as a bumper sticker or a
Cruise Control System may
system is not functioning normally.
bumper guard near the radar
not operate properly. Have the
Take your vehicle to an authorized
sensor. Doing so may
vehicle inspected by an
HYUNDAI dealer and have the sys-
adversely affect the sensing
authorized HYUNDAI dealer.
tem checked.
performance of the radar.
•
Use only genuine HYUNDAI
•
Always keep the radar sensor
parts to repair or replace a
and lens cover clean and free
damaged sensor or sensor
of dirt and debris.
cover. Do not apply paint to
•
Use only a soft cloth to wash
the sensor cover.
the vehicle. Do not spray pres-
surized water directly on the
sensor or sensor cover.
(Continued)
5-100
To Adjust the Sensitivity of
To Convert to Cruise Control
WARNING
Smart Cruise Control
Mode
The sensitivity of vehicle speed
The driver may choose to switch to
When using the conventional
when following the front vehicle to
use the conventional Cruise Control
Cruise Control mode, you must
maintain the set distance can be
mode (speed only control function)
manually adjust the distance to
adjusted. Go to the 'User Settings →
by following these steps:
other vehicles by depressing
Driving Assist
→ Smart Cruise
1. Push the CRUISE button on the
the accelerator or brake pedal.
Control Response → Slow/Normal/
steering wheel to turn the system
The system does not automati-
Fast' on the LCD display. You may
on. The cruise (
) indi-
cally adjust the distance to
select one of the three stages you
cator will illuminate.
vehicles in front of you.
prefer.
2. Push and hold the Vehicle-to-
• Slow:
Vehicle Distance button for more
Vehicle speed following the front
than 2 seconds.
vehicle to maintain the set distance
5
3. Choose between "Smart Cruise
is slower than normal speed.
Control" and "Cruise Control".
• Normal:
When the system is canceled using
Vehicle speed following the front
the CRUISE button or the CRUISE
vehicle to maintain the set distance
button is used after the engine is
is normal.
turned on, the Smart Cruise Control
mode will turn on.
• Fast:
Vehicle speed following the front
vehicle to maintain the set distance
is faster than normal speed.
i
Information
The last selected speed sensitivity of
the smart cruise control is remained in
the system.
5-101
Driving your vehicle
Limitations of the System
On curves
The Smart Cruise Control System
may have limits to its ability to detect
distance to the vehicle ahead due to
road and traffic conditions.
OAE056101
Your vehicle speed can be reduced
OAE056100
due to a vehicle in the adjacent lane.
• The Smart Cruise Control System
Apply the accelerator pedal and
may not detect a moving vehicle in
select the appropriate set speed.
your lane, and then your vehicle
Check to be sure that the road con-
could accelerate to the set speed.
ditions permit safe operation of the
Also, the vehicle speed will
Smart Cruise Control.
decrease when the vehicle ahead
is recognized suddenly.
• Select the appropriate set speed
on curves and apply the brakes or
accelerator pedal if necessary.
5-102
On inclines
Lane changing
Detecting vehicles
OAE056102
OAE056103
OAE056104
5
•
During uphill or downhill driving,
•
A vehicle which moves into your
Some vehicles in your lane cannot
the Smart Cruise Control System
lane from an adjacent lane cannot
be recognized by the sensor:
may not detect a moving vehicle in
be recognized by the sensor until it
- Narrow vehicles such as motorcy-
your lane, and cause your vehicle
is in the sensor's detection range.
cles or bicycles
to accelerate to the set speed.
•
The radar may not detect immedi-
- Vehicles offset to one side
Also, the vehicle speed will rapidly
ately when a vehicle cuts in sud-
decrease when the vehicle ahead
- Slow-moving vehicles or sudden-
denly. Always pay attention to the
is recognized suddenly.
decelerating vehicles
traffic, road and driving conditions.
•
Select the appropriate set speed
- Stopped vehicles
•
If a slower vehicle moves into your
on inclines and apply the brake or
- Vehicles with small rear profile
lane, your speed may decrease to
accelerator pedal if necessary.
such as trailers with no loads
maintain the distance to the vehicle
ahead.
•
If a faster vehicle which moves into
your lane, your vehicle will acceler-
ate to the set speed.
5-103
Driving your vehicle
A vehicle ahead cannot be recog-
nized correctly by the sensor if any of
following occurs:
- When the vehicle is pointing
upwards due to overloading in the
luggage compartment
- While the steering wheel is operat-
ing
- When driving to one side of the
lane
- When driving on narrow lanes or
OAE056108
OAE056109
on curves
•
Your vehicle may accelerate when
•
When driving in stop-and-go traffic,
Apply the brake or accelerator pedal
a vehicle ahead of you disappears.
and a stopped vehicle in front of
if necessary.
you merges out of the lane, the
•
When you are warned that the
system may not immediately
vehicle ahead of you is not detect-
detect the new vehicle that is now
ed, drive with caution.
in front of you. In this case, you
must maintain a safe braking dis-
tance, and if necessary, depress
the brake pedal to reduce your
driving speed in order to maintain a
safe distance.
5-104
WARNING
When using the Smart Cruise
Control take the following pre-
cautions:
•
If an emergency stop is nec-
essary, you must apply the
brakes. The vehicle cannot be
stopped at every emergency
situation by using the Smart
Cruise Control System.
OAE056110
OPD056040
•
Keep a safe distance accord-
•
Always look out for pedestrians
•
Always be cautious for vehicles
ing to road conditions and
when your vehicle is maintaining a
with higher height or vehicles car-
vehicle speed. If the vehicle to
5
distance with the vehicle ahead.
rying loads that sticks out from the
vehicle distance is too close
back of the vehicle.
during a high-speed driving, a
serious collision may result.
•
Always maintain sufficient
braking distance and deceler-
ate your vehicle by applying
the brakes if necessary.
•
The Smart Cruise Control
System cannot recognize a
stopped vehicle, pedestrians or
an oncoming vehicle. Always
look ahead cautiously to pre-
vent unexpected and sudden
situations from occurring.
(Continued)
5-105
Driving your vehicle
NOTICE
i
(Continued)
Information
•
Vehicles moving in front of
The Smart Cruise Control System
Radio frequency radiation exposure
you with a frequent lane
may not operate temporarily due
information:
change may cause a delay in
to:
This equipment complies with FCC
the system's reaction or may
radiation exposure limits set forth for
• Electrical interference
cause the system to react to a
an uncontrolled environment.
• Modifying the suspension
vehicle actually in an adjacent
This equipment should be installed
• Differences of tire abrasion or
lane. Always drive cautiously
and operated with minimum distance
to prevent unexpected and
tire pressure
of 8 in. (20 cm) between the radiator
sudden situations from occur-
• Installing different type of tires
(antenna) and your body.
ring.
This transmitter must not be co-locat-
•
Always be aware of the select-
i
Information
ed or operating in conjunction with
ed speed and vehicle to vehi-
any other antenna or transmitter.
This device complies with Part 15 of
cle distance. The driver
the FCC rules.
should not solely rely on the
system but always pay atten-
Operation is subject to the following
tion to driving conditions and
three conditions:
control your vehicle speed.
1. This device may not cause harmful
•
The Smart Cruise Control
interference, and
System may not recognize
2. This device must accept any interfer-
complex driving situations so
ence received, including interference
always pay attention to driv-
that may cause undesired operation.
ing conditions and control
3. Changes or modifications not
your vehicle speed.
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the device.
5-106
SPECIAL DRIVING CONDITIONS
Hazardous Driving Conditions
Rocking the Vehicle
WARNING
When hazardous driving elements
If it is necessary to rock the vehicle
are encountered such as water,
to free it from snow, sand, or mud,
If the vehicle is stuck and
snow, ice, mud and sand, take the
first turn the steering wheel right and
excessive wheel spin occurs,
below suggestions:
left to clear the area around your
the temperature in the tires can
• Drive cautiously and keep a longer
front wheels. Then, shift back and
increase very quickly. If the tires
forth between R (Reverse) and a for-
braking distance.
become damaged, a tire blow
ward gear.
out or tire explosion can occur.
• Avoid abrupt braking or steering.
Try to avoid spinning the wheels, and
This condition is dangerous -
• When your vehicle is stuck in snow,
do not race the engine.
you and others may be injured.
mud, or sand, use second gear.
Do not attempt this procedure if
To prevent transmission wear, wait
Accelerate slowly to avoid unnec-
people or objects are anywhere
essary wheel spin.
until the wheels stop spinning before
near the vehicle.
shifting gears. Release the accelera-
• Put sand, rock salt, tire chains or
tor pedal while shifting, and press
If you attempt to free the vehicle,
5
other non-slip materials under the
lightly on the accelerator pedal while
the vehicle can overheat quickly,
wheels to provide additional trac-
the transmission is in gear. Slowly
possibly causing an engine
tion while the vehicle becomes
spinning the wheels in forward and
compartment fire or other dam-
stuck in ice, snow, or mud.
reverse directions causes a rocking
age. Try to avoid spinning the
motion that may free the vehicle.
wheels as much as possible to
WARNING
prevent overheating of either the
tires or the engine. DO NOT
Downshifting with an automatic
allow the vehicle to spin the
transmission/dual clutch trans-
wheels above 35 mph (56 km/h).
mission while driving on slip-
pery surfaces can cause an
accident. The sudden change in
tire speed could cause the tires
to skid. Be careful when down-
shifting on slippery surfaces.
5-107
Driving your vehicle
Driving at Night
Driving in the Rain
i
Information
Night driving presents more hazards
Rain and wet roads can make driving
The ESC system must be turned OFF
than driving in the daylight. Here are
dangerous. Here are a few things to
before rocking the vehicle.
some important tips to remember:
consider when driving in the rain or
on slick pavement:
•
Slow down and keep more dis-
NOTICE
tance between you and other vehi-
•
Slow down and allow extra follow-
If you are still stuck after rocking
cles, as it may be more difficult to
ing distance. A heavy rainfall
the vehicle a few times, have the
see at night, especially in areas
makes it harder to see and increas-
vehicle pulled out by a tow vehicle
where there may not be any street
es the distance needed to stop
to avoid engine overheating, pos-
lights.
your vehicle.
sible damage to the transmission,
•
Adjust your mirrors to reduce the
•
Turn OFF your Cruise Control.
and tire damage. See "Towing" in
glare from other driver's head-
•
Replace your windshield wiper
chapter 6.
lamps.
blades when they show signs of
•
Keep your headlamps clean and
streaking or missing areas on the
Smooth Cornering
properly aimed. Dirty or improperly
windshield.
aimed headlamps will make it
Avoid braking or gear changing in
•
Tires should be properly main-
much more difficult to see at night.
corners, especially when roads are
tained with at least 2/32nds of an
wet. Ideally, corners should always
•
Avoid staring directly at the head-
inch of tread depth. If your tires do
be taken under gentle acceleration.
lamps of oncoming vehicles. You
not have enough tread, making a
could be temporarily blinded, and it
quick stop on wet pavement can
will take several seconds for your
cause a skid and possibly lead to
eyes to readjust to the darkness.
an accident. See "Tire Tread" in
chapter 7.
•
Turn on your headlamps to make it
easier for others to see you.
5-108
• Driving too fast through large pud-
Driving in Flooded Areas
Fuel, engine coolant and engine
dles can affect your brakes. If you
oil
Avoid driving through flooded areas
must go through puddles, try to
unless you are sure the water is no
Driving at higher speeds on the high-
drive through them slowly.
higher than the bottom of the wheel
way consumes more fuel and is less
• If you believe your brakes may be
hub. Drive through any water slowly.
efficient than driving at a slower,
wet, apply them lightly while driv-
Allow adequate stopping distance
more moderate speed. Maintain a
ing until normal braking operation
because brake performance may be
moderate speed in order to conserve
returns.
reduced.
fuel when driving on the highway.
After driving through water, dry the
Be sure to check both the engine
Hydroplaning
brakes by gently applying them sev-
coolant level and the engine oil
eral times while the vehicle is moving
before driving.
If the road is wet enough and you are
going fast enough, your vehicle may
slowly.
have little or no contact with the road
Drive belt
surface and actually ride on the
5
Highway Driving
A loose or damaged drive belt may
water. The best advice is SLOW
overheat the engine.
DOWN when the road is wet.
Tires
Adjust the tire inflation, as specified.
The risk of hydroplaning increas-
Under-inflation may overheat or
WARNING
es as the depth of tire tread
damage the tires.
decreases, refer to "Tire Tread" in
In a rollover crash, an unbelted
Do not install worn-out or damaged
chapter 7.
person is significantly more
tires, which may reduce traction or
likely to die than a person wear-
adversely affect vehicle handling.
ing a seat belt. Make sure all
This could lead to sudden tire failure
passengers are wearing their
that may cause loss of vehicle con-
seat belts.
trol resulting in an accident.
i
Information
Never over-inflate your tires above the
maximum inflation pressure, as speci-
fied on your tires.
5-109
Driving your vehicle
WINTER DRIVING
The severe weather conditions of
Snow tires
Tire chains
winter quickly wear out tires and
cause other problems. To minimize
WARNING
winter driving problems, you should
take the following suggestions:
Snow tires should be equivalent
in size and type to the vehicle’s
standard tires. Otherwise, the
Snow or Icy Conditions
safety and handling of your
You need to keep sufficient distance
vehicle may be adversely affect-
between your vehicle and the vehicle
ed.
in front of you.
Apply the brakes gently. Speeding,
If you mount snow tires on your vehi-
rapid acceleration, sudden brake
cle, make sure to use radial tires of
OPD056072
applications, and sharp turns are
the same size and load range as the
potentially very hazardous practices.
original tires. Mount snow tires on all
Since the sidewalls of radial tires are
During deceleration, use engine
four wheels to balance your vehicle’s
thinner than other types of tires, they
braking to the fullest extent. Sudden
handling in all weather conditions.
may be damaged by mounting some
brake applications on snowy or icy
The traction provided by snow tires
types of tire chains on them.
roads may cause the vehicle to skid.
on dry roads may not be as high as
Therefore, the use of snow tires is
your vehicle's original equipment
recommended instead of tire chains.
To drive your vehicle in deep snow, it
may be necessary to use snow tires
tires. Check with the tire dealer for
Do not mount tire chains on vehicles
maximum speed recommendations.
equipped with aluminum wheels; if
or to install tire chains on your tires.
unavoidable use a wire type chain. If
Always carry emergency equipment.
tire chains must be used, use gen-
Some of the items you may want to
i
Information
uine HYUNDAI parts and install the
carry include tire chains, tow straps
Do not install studded tires without
tire chain after reviewing the instruc-
or chains, a flashlight, emergency
first checking local, state and munici-
tions provided with the tire chains.
flares, sand, a shovel, jumper cables,
pal regulations for possible restric-
Damage to your vehicle caused by
a window scraper, gloves, ground
tions against their use.
improper tire chain use is not cov-
cloth, coveralls, a blanket, etc.
ered by your vehicle manufacturer’s
warranty.
5-110
Chain installation
i
Information
WARNING
When installing tire chains, follow the
•
Install tire chains on both left and
manufacturer’s instructions and
The use of tire chains may
right front tires. It should be noted
mount them as tightly possible. Drive
adversely affect vehicle han-
that installing tire chains on the
slowly (less than 20 mph (30 km/h))
dling:
tires will provide a greater driving
with chains installed. If you hear the
• Drive less than
20 mph
force, but will not prevent side
chains contacting the body or chas-
(30 km/h) or the chain manu-
skids.
sis, stop and tighten them. If they still
facturer's recommended speed
•
Do not install studded tires without
make contact, slow down until the
limit, whichever is lower.
first checking local, state and
noise stops. Remove the tire chains
• Drive carefully and avoid
municipal regulations for possible
as soon as you begin driving on
bumps, holes, sharp turns,
restrictions against their use.
cleared roads.
and other road hazards, which
When mounting snow chains, park
may cause the vehicle to
the vehicle on level ground away
bounce.
5
from traffic. Turn on the vehicle
• Avoid sharp turns or locked
Hazard Warning Flasher and place a
wheel braking.
triangular emergency warning device
behind the vehicle
(if available).
Always place the vehicle in P (Park),
CAUTION
apply the parking brake and turn off
the engine before installing snow
If your vehicle has
225/40R18
chains.
size tires do not use tire chain;
they can damage your vehicle
(wheel, suspension and body).
5-111
Driving your vehicle
NOTICE
Winter Precautions
Change to "winter weight" oil if
necessary
Use high quality ethylene glycol
- When using tire chains:
coolant
In some climates it is recommended
•
Wrong size chains or improperly
that a lower viscosity "winter weight"
installed chains can damage
Your vehicle is delivered with high
oil be used during cold weather. See
quality ethylene glycol coolant in the
your vehicle's brake lines, sus-
chapter
8 for recommendations. If
pension, body and wheels.
cooling system. It is the only type of
you aren't sure what weight oil you
coolant that should be used because
•
Use SAE "S" class or wire
should use, consult an authorized
it helps prevent corrosion in the cool-
chains.
HYUNDAI dealer.
ing system, lubricates the water
•
If you hear noise caused by
pump and prevents freezing. Be sure
chains contacting the body,
to replace or replenish your coolant
Check battery and cables
retighten the chain to prevent
in accordance with the maintenance
Winter puts additional burdens on
contact with the vehicle body.
schedule in chapter 7. Before winter,
the battery system. Visually inspect
•
To prevent body damage,
have your coolant tested to assure
the battery and cables as described
retighten the chains after driving
that its freezing point is sufficient for
in chapter 7. The level of charge in
0.3~0.6 miles (0.5~1.0 km).
the temperatures anticipated during
your battery can be checked by an
the winter.
•
Do not use tire chains on vehi-
authorized HYUNDAI dealer or a
cles equipped with aluminum
service station.
wheels. If unavoidable, use a
wire type chain.
•
Use wire chains less than 0.47
inch (12 mm) wide to prevent
damage to the chain’s connec-
tion.
5-112
Check spark plugs and ignition
Do not let your parking brake
Don't place foreign objects or
system
freeze
materials in the engine com-
Inspect your spark plugs as
Under some conditions your parking
partment
described in chapter 7 and replace
brake can freeze in the engaged
Placement of foreign object or mate-
them if necessary. Also check all
position. This is most likely to happen
rials which prevent cooling of the
ignition wiring and components to be
when there is an accumulation of
engine, in the engine compartment,
sure they are not cracked, worn or
snow or ice around or near the rear
may cause a failure or combustion.
damaged in any way.
brakes or if the brakes are wet. If
The manufacturer is not responsible
there is a risk the parking brake may
for the damage caused by such
freeze, apply it only temporarily while
placement.
Use approved window washer
you put the gear selector lever in P
anti-freeze in system
and block the rear wheels so the car
To keep locks from freezing
To keep the water in the window
cannot roll. Then release the parking
washer system from freezing, add an
brake.
To keep the locks from freezing,
approved window washer anti-freeze
squirt an approved de-icer fluid or
5
solution in accordance with instruc-
glycerine into the key opening. If a
Do not let ice and snow accu-
tions on the container. Window wash-
lock is covered with ice, squirt it with
mulate underneath
er anti-freeze is available from an
an approved de-icing fluid to remove
authorized HYUNDAI dealer and
Under some conditions, snow and
the ice. If the lock is frozen internally,
most auto parts outlets. Do not use
ice can build up under the fenders
you may be able to thaw it out by
engine coolant or other types of anti-
and interfere with the steering. When
using a heated key. Handle the heat-
freeze as these may damage the
driving in severe winter conditions
ed key with care to avoid injury.
paint finish.
where this may happen, you should
periodically check underneath the
car to be sure the movement of the
front wheels and the steering com-
ponents is not obstructed.
5-113
Driving your vehicle
VEHICLE LOAD LIMIT
Two labels on your driver's door sill
Cargo Weight
GVW (Gross Vehicle Weight)
show how much weight your vehicle
This figure includes all weight added
This is the Base Curb Weight plus
was designed to carry: the Tire and
to the Base Curb Weight, including
actual Cargo Weight plus passen-
Loading Information Label and the
cargo and optional equipment.
gers.
Certification Label.
Before loading your vehicle, familiar-
GAW (Gross Axle Weight)
GVWR (Gross Vehicle Weight
ize yourself with the following terms
Rating)
for determining your vehicle’s weight
This is the total weight placed on
ratings, from the vehicle's specifica-
each axle (front and rear) - including
This is the maximum allowable
tions and the Certification Label:
vehicle curb weight and all payload.
weight of the fully loaded vehicle
(including all options, equipment,
passengers and cargo). The GVWR
Base Curb Weight
GAWR (Gross Axle Weight Rating)
is shown on the Certification Label
This is the weight of the vehicle
This is the maximum allowable
located on the driver’s door sill.
including a full tank of fuel and all
weight that can be carried by a single
standard equipment. It does not
axle (front or rear). These numbers
include passengers, cargo, or option-
are shown on the Certification Label.
al equipment.
The total load on each axle must
never exceed its GAWR.
Vehicle Curb Weight
This is the weight of your new vehicle
when you picked it up from your deal-
er plus any aftermarket equipment.
5-114
Tire Loading Information Label The label located on the driver's door
Seating capacity
sill gives the original tire size, cold
Total : 5 persons
■ Type A
tire pressures recommended for your
(Front seat : 2 persons,
vehicle, the number of people that
Rear seat : 3 persons)
can be in your vehicle and vehicle
Seating capacity is the maximum
capacity weight.
number of occupants including a
driver, your vehicle may carry.
Vehicle capacity weight
However, the seating capacity may
be reduced based upon the weight of
849 lbs. (385 kg)
all of the occupants, and the weight
Vehicle capacity weight is the maxi-
of the cargo being carried or towed.
■ Type B
mum combined weight of occupants
Do not overload the vehicle as there
and cargo. If your vehicle is equipped
is a limit to the total weight, or load
with a trailer, the combined weight
limit including occupants and cargo,
includes the tongue load.
5
the vehicle can carry.
Towing capacity
We do not recommend using this
vehicle for trailer towing.
■ Type C
Cargo capacity
The cargo capacity of your vehicle
will increase or decrease depending
on the weight and the number of
occupants and the tongue load, if
your vehicle is equipped with a trailer.
OPD067040N/OPD067038N/OPD067037N
5-115
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст