Hyundai Elantra GT (2018 year). Instruction — part 11
Floor & Defrost
Face-Level (B, D, F)
(A, C, D, E, F)
Air flow is directed toward the upper
Most of the air flow is directed to the
body and face. Additionally, each
floor and the windshield with a small
outlet can be controlled to direct the
amount directed to the side window
air discharged from the outlet.
defrosters, and side vents.
3
Defrost-Level (A, D)
Bi-Level (B, C, D, E, F)
OPD046308
Most of the air flow is directed to the
MAX A/C-Level (B, D, F)
Air flow is directed towards the face
windshield with a small amount of air
(if equipped)
and the floor.
directed to the side vents.
The MAX A/C mode is used to cool
the inside of the vehicle faster. Air
flow is directed toward the upper
Floor-Level (A, C, D, E, F)
body and face.
In this mode, the air conditioning and
the recirculated air position cannot be
Most of the air flow is directed to the
selected. Turn the fan speed mode to
floor, with a small amount of the air
adjust.
being directed to the windshield, side
window defrosters, and side vents.
After the interior has cooled suffi-
ciently, whenever possible, move the
temperature knob away from Max AC
and press the A/C button.
3-97
Convenient features of your vehicle
Instrument panel vents
Temperature control
Air intake control
■ Front
■ Type A
■ Type B
■ Type A
OPD046309
OPD046312
■ Rear (if equpipped)
■ Type B
OPD046351
The temperature will increase by
turning the knob to the right.
The temperature will decrease by
turning the knob to the left.
OPD046310
OPD046313
The outlet vents can be opened (
)
This button is used to select the out-
or closed (
) separately using the
side (fresh) air position or recirculat-
thumbwheel.
ed air position.
Also, you can adjust the direction of
air delivered from these vents using
the vent control lever as shown.
3-98
Recirculated air position
i
Information
WARNING
With the recirculated air
Using the system in the fresh air posi-
position selected, air
tion is recommended.
•
Continued use of the climate
from the passenger
control system operation in
Prolonged operation of the heater in
compartment will be
the recirculated air position
the recirculated air position (without
drawn through the heat-
can cause drowsiness or
air conditioning selected) can cause
ing system and heated
sleepiness, that may cause
fogging of the windshield and side
3
or cooled according to
loss of vehicle control result-
windows and the air within the pas-
the function selected.
ing in an accident. Set the air
senger compartment will become
intake control to the outside
stale.
(fresh) air position as much as
Outside (fresh) air position
In addition, prolonged use of the air
possible while driving.
■ Type A
conditioning with the recirculated air
With the outside (fresh)
•
Continued use of the climate
position selected will result in exces-
air position selected, air
control system operation in
sively dry air in the passenger com-
enters the vehicle from
the recirculated air position
partment.
outside and is heated or
(without the air conditioning
■ Type B
cooled according to the
selected) may allow humidity
function selected.
to increase inside the vehicle
which may fog the glass and
obscure visibility.
•
Do not sleep in a vehicle with
the air conditioning or heating
system on. It may cause seri-
ous injury or death due to a
drop in the oxygen level
and/or body temperature.
3-99
Convenient features of your vehicle
Fan speed control
Air conditioning (if equipped)
System Operation
Ventilation
1. Select the Face Level
mode.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
OPD047311N
OPD046314
1. Select the Floor Level
mode.
Turn the knob to the right to increase
Push the A/C button to turn the sys-
2. Set the air intake control to the
the fan speed and airflow. Turn the
tem on (indicator light will illuminate)
outside (fresh) air position.
knob to the left to decrease fan
and off.
3. Set the temperature control to the
speed and airflow.
desired position.
Setting the fan speed control knob to
4. Set the fan speed control to the
the "0" position turns off the fan.
desired speed.
NOTICE
5. If dehumidified heating is desired,
turn the air conditioning system on.
Operating the fan speed when the
If the windshield fogs up, select the
ignition switch is in the ON posi-
Floor & Defrost
mode or press
tion could cause the battery to
the Front Defrost
mode.
discharge. Operate the fan speed
when the engine is running.
3-100
Operation Tips
Air conditioning
NOTICE
•
To keep dust or unpleasant fumes
All HYUNDAI Air Conditioning
When using the air conditioning
from entering the vehicle through
Systems are filled with environmen-
system, monitor the engine tem-
the ventilation system, temporarily
tally friendly R-1234yf refrigerant.
perature gauge closely while driv-
set the air intake control to the
1. Start the engine.
ing up hills or in heavy traffic when
recirculated air position. Return the
2. Push the air conditioning button.
outside temperatures are high. Air
control to the fresh air position
conditioning system operation can
when the irritation has passed.
3. Set the mode to the Face Level
3
cause engine overheating.
This will help keep the driver alert
mode.
and comfortable.
4. Set the air intake control to the
Continue to use the fan, but turn
the air conditioning system off if
•
To help prevent the inside of the
recirculated air position. However,
the engine temperature gauge
windshield from fogging, set the air
prolonged operation of the recircu-
indicates engine overheating.
intake control to the fresh air posi-
lated air position will excessively
tion and fan speed to the desired
dry the air. In this case, change the
position, turn on the air conditioning
air position.
system, and adjust the temperature
5. Adjust the fan speed control and
control to the desired temperature.
temperature control to maintain
maximum comfort.
When maximum cooling is desired,
set the temperature control to the
extreme left position then set the fan
speed control to the highest speed.
3-101
Convenient features of your vehicle
Air conditioning system operation tips
System Maintenance
Checking the amount of air
•
If the vehicle has been parked in
conditioner refrigerant and
Climate control air filter
direct sunlight during hot weather,
compressor lubricant
open the windows for a short time
When the amount of refrigerant is
Outside air
to let the hot air inside the vehicle
low, the performance of the air con-
escape.
ditioning is reduced. Overfilling also
Recirculated
•
After sufficient cooling has been
air
reduces the performance of the air
achieved, switch back from the
conditioning system.
recirculated air to the fresh outside
Therefore, if abnormal operation is
air position.
found, have the system inspected by
•
To help reduce moisture inside of
an authorized HYUNDAI dealer.
Blower
the windows on rainy or humid
Heater core
days, decrease the humidity inside
Climate control
Evaporator
NOTICE
air filter
core
the vehicle by operating the air con-
1LDA5047
It is important that the correct
ditioning system with the windows
This filter is installed behind the glove
type and amount of oil and refrig-
and sunroof closed.
box. It filters the dust or other pollu-
erant is used. Otherwise, damage
•
Use the air conditioning system
tants that enter the vehicle through the
to the compressor and abnormal
every month only for a few minutes
heating and air conditioning system.
system operation may occur.
to ensure maximum system per-
Have the climate control air filter be
formance.
replaced by an authorized HYUNDAI
•
If you operate air conditioner exces-
dealer according to the maintenance
sively, the difference between the
schedule. If the vehicle is being driven
temperature of the outside air and
in severe conditions such as dusty or
that of the windshield could cause
rough roads, more frequent air condi-
the outer surface of the windshield
tioner filter inspections and changes
to fog up, causing loss of visibility.
are required.
In this case, set the mode selection
If the air flow rate suddenly decreas-
knob or button to the
position
es, the system should be checked at
and fan speed control to the lower
an authorized HYUNDAI dealer.
speed.
3-102
Air Conditioning refrigerant label
WARNING
■ Example
Because the refrigerant
is mildly inflammable at
very high pressure, the
air conditioning system
should only be serv-
3
iced by trained and cer-
tified technicians. It is
important that the cor-
rect type and amount of oil and
refrigerant is used. Otherwise, it
may cause damage to the vehi-
ODH043366
cle and personal injury.
The actual Air Conditioning refriger-
ant label in the vehicle may differ
from the illustration.
The air conditioning system should
be serviced by an authorized
HYUNDAI dealer.
Each symbols and specification on air
conditioning refrigerant label means
as below :
1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of Compressor lubri-
cant
Refer to chapter 8 for more detail
location of the air conditioning refrig-
erant label.
3-103
Convenient features of your vehicle
AUTOMATIC CLIMATE CONTROL SYSTEM
1. Driver's temperature control knob
2. Passenger's temperature control knob
3. AUTO (automatic control) button
4. OFF button
5. Fan speed control button
6. Mode selection button
7. SYNC button
8. Front windshield defroster button
9. Rear window defroster button
10. Air conditioning button
11. Air intake control button
12. Climate control information screen
OPD046302
3-104
Automatic Heating and Air
To turn the automatic operation off,
Conditioning
select any button of the following:
- Mode selection button
- Front windshield defroster button
(Press the button one more time
to deselect the front windshield
defroster function. The 'AUTO'
sign will illuminate on the infor-
3
mation display once again.)
- Fan speed control button
OPD046315
The selected function will be con-
trolled manually while other functions
2. Turn the temperature control knob
operate automatically.
to the desired temperature. If the
OPD046350
For your convenience and to improve
temperature is set to the lowest
The Automatic Climate Control
setting
(Lo), the air conditioning
the effectiveness of the climate con-
System is controlled by setting the
system will operate continuously.
trol, use the AUTO button and set the
desired temperature.
After the interior has cooled suffi-
temperature to 73°F (23°C).
1. Press the AUTO button.
ciently, adjust the knob to a higher
To change the temperature unit from
temperature set point whenever
°F to °C or °C to °F:
The modes, fan speeds, air intake
possible.
and air-conditioning will be controlled
Press and hold the AUTO and OFF
automatically by the temperature set-
buttons on the climate control unit for
ting you select.
3 seconds.
3-105
Convenient features of your vehicle
Manual Heating and Air
3. Set the temperature control to the
Conditioning
desired position.
4. Set the air intake control to the
The heating and cooling system can
be controlled manually by pushing
outside (fresh) air position.
buttons other than the AUTO button.
5. Set the fan speed control to the
In this case, the system works
desired speed.
sequentially according to the order of
6. If air conditioning is desired, turn
buttons selected.
the air conditioning system on.
When pressing any button except the
7. Press the AUTO button to convert
AUTO button while using automatic
to full automatic control of the sys-
operation, the functions not selected
OPD046316
tem.
will be controlled automatically.
NOTICE
1. Start the engine.
Never place anything near the
2. Set the mode to the desired posi-
sensor to ensure better control of
tion.
the heating and cooling system.
To improve the effectiveness of
heating and cooling, select:
- Heating:
- Cooling:
3-106
Mode selection
The air flow outlet direction is cycled
as follows:
Face-Level (B, D, F)
3
Air flow is directed toward the upper
body and face. Additionally, each
outlet can be controlled to direct the
air discharged from the outlet.
Bi-Level (B, C, D, E, F)
Air flow is directed towards the face
and the floor.
(if equipped)
(if equipped)
OPDE046307/OPD046317
The mode selection button controls the direction of the air flow through the
ventilation system.
3-107
Convenient features of your vehicle
Instrument panel vents
Floor & Defrost
■ Front
(A, C, D, E, F)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
Floor-Level (A, C, D, E, F)
OPD046352
OPD046309
■ Rear (if equpipped)
Defrost-Level (A)
Most of the air flow is directed to the
floor, with a small amount of the air
Most of the air flow is directed to the
being directed to the windshield and
windshield with a small amount of air
side window defrosters.
directed to the side window defrosters.
OPD046310
The outlet vents can be opened (
)
or closed (
) separately using the
thumbwheel.
Also, you can adjust the direction of
air delivered from these vents using
the vent control lever as shown.
3-108
Temperature control
Adjusting the driver and passenger
side temperature individually
Press the "SYNC" button again to
operate the driver and passenger
side temperature individually. The
button indicator will turn off.
3
Temperature conversion
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.
OPD046320
To change the temperature unit from
Adjusting the driver and passenger
OPD046315
°F to °C or °C to °F:
side temperature equally
Turn the knob to the right to increase
- On the instrument cluster, go to
• Press the "SYNC" button to oper-
the temperature. Turn the knob to the
ate the driver and passenger side
User Settings Mode ➝ Other ➝
left to decrease temperature.
Temperature Unit.
temperature equally.
The temperature will increase or
- Press and hold the AUTO and OFF
The passenger side temperature
decrease by 1°F/0.5°C for each incre-
buttons on the climate control unit
will be set to the same temperature
mental location. When set to the low-
for 3 seconds.
as the driver side temperature.
est temperature setting, the air condi-
tioning will operate continuously.
• Turn the left temperature control
The temperature unit on both the
knob. The driver and passenger
cluster LCD display and climate con-
side temperature will be adjusted
trol screen will change.
equally.
3-109
Convenient features of your vehicle
Air intake control
Outside (fresh) air position
WARNING
With the outside (fresh)
air position selected, air
•
Continued use of the climate
enters the vehicle from
control system operation in
outside and is heated or
the recirculated air position
cooled according to the
can cause drowsiness or
function selected.
sleepiness, that may cause
loss of vehicle control result-
i
Information
ing in an accident. Set the air
intake control to the outside
Using the system in the fresh air position
(fresh) air position as much as
is recommended.
possible while driving.
Prolonged operation of the heater in the
OPD046321
•
Continued use of the climate
recirculated air position
(without air
control system operation in
This button is used to select the out-
conditioning selected) can cause fogging
the recirculated air position
side (fresh) air position or recirculat-
of the windshield and side windows and
(without the air conditioning
ed air position.
the air within the passenger compart-
selected) may allow humidity
ment will become stale.
to increase inside the vehicle
Recirculated air position
In addition, prolonged use of the air
which may fog the glass and
conditioning with the recirculated air
With the recirculated air
obscure visibility.
position selected will result in exces-
position selected, air
•
Do not sleep in a vehicle with
sively dry air in the passenger com-
from the passenger
the air conditioning or heating
partment.
compartment will be
system on. It may cause seri-
drawn through the heat-
ous injury or death due to a
ing system and heated
drop in the oxygen level
or cooled according to
and/or body temperature.
the function selected.
3-110
Fan speed control
Air conditioning
i
Information
For better sound quality, fan speed
may automatically slow down for a
couple of minutes when you activate
voice recognition or hands free.
NOTICE
3
Operating the fan when the igni-
tion switch is in the ON position
could cause the battery to dis-
charge. Operate the fan when the
engine is running.
OPD046323
OPD046322
The fan speed can be set as desired
Push the A/C button to manually turn
by pushing the fan speed control but-
the system on (indicator light will illu-
ton.
minate) and off.
More air is delivered with higher fan
speeds.
Pressing the OFF button turns off the
fan.
3-111
Convenient features of your vehicle
OFF mode
System Operation
Operation Tips
Ventilation
•
To keep dust or unpleasant fumes
from entering the car through the
1. Select the Face Level
mode.
ventilation system, temporarily set
2. Set the air intake control to the
the air intake control to the recircu-
outside (fresh) air position.
lated air position. Return the con-
3. Set the temperature control to the
trol to the fresh air position when
desired position.
the irritation has passed. This will
help keep the driver alert and com-
4. Set the fan speed control to the
fortable.
desired speed.
•
To help prevent the inside of the
windshield from fogging, set the air
Heating
intake control to the fresh air posi-
OPD046324
1. Select the Floor Level
mode.
tion and fan speed to the desired
Push the OFF button to turn the cli-
position, turn on the air conditioning
2. Set the air intake control to the
mate control system off. You can still
outside (fresh) air position.
system, and adjust the temperature
operate the mode and air intake but-
control to the desired temperature.
3. Set the temperature control to the
tons as long as the ignition switch is
desired position.
in the ON position.
4. Set the fan speed control to the
desired speed.
5. If dehumidified heating is desired,
turn the air conditioning system on.
If the windshield fogs up, select the
Floor & Defrost
mode or press
the Front Defrost
mode.
3-112
Air conditioning
NOTICE
•
To help reduce moisture inside of
the windows on rainy or humid
All HYUNDAI Air Conditioning
When using the air conditioning
days, decrease the humidity inside
Systems are filled with environmen-
system, monitor the engine tem-
the vehicle by operating the air
tally friendly R-1234yf refrigerant.
perature gauge closely while driv-
conditioning system with the win-
1. Start the engine.
ing up hills or in heavy traffic
dows and sunroof closed.
2. Push the air conditioning button.
when outside temperatures are
•
Use the air conditioning system
high. Air conditioning system
3. Set the mode to the Face Level
every month only for a few minutes
3
operation can cause engine over-
mode.
to ensure maximum system per-
heating. Continue to use the fan,
4. Set the air intake control to the
formance.
but turn the air conditioning sys-
recirculated air position. However,
•
If you operate air conditioner
tem off if the engine temperature
prolonged operation of the recircu-
excessively, the difference between
gauge indicates engine overheat-
lated air position will excessively
the temperature of the outside air
ing.
dry the air. In this case, change the
and that of the windshield could
air position.
cause the outer surface of the
5. Adjust the fan speed control and
Air conditioning system operation
windshield to fog up, causing loss
temperature control to maintain
tips
of visibility. In this case, set the
maximum comfort.
• If the vehicle has been parked in
mode selection knob or button to
direct sunlight during hot weather,
the
position and fan speed
When maximum cooling is desired,
open the windows for a short time
control to the lower speed.
set the temperature control to the
to let the hot air inside the vehicle
extreme left position then set the fan
escape.
speed control to the highest speed.
• After sufficient cooling has been
achieved, switch back from the
recirculated air to the fresh outside
air position.
3-113
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст