Hyundai Sonata (2022 year). Manual in english — page 6

Convenience Features

Accessing Your Vehicle

Remote Key (if equipped)

WARNING

Do not leave the keys in your

vehicle with unsupervised children.

Unattended children could place the

key in the ignition switch and may

operate power windows or other

controls, or even make the vehicle

move, which could result in serious

injury or death.

Unlocking your vehicle

To unlock your vehicle:

OIG046001

1. Press the Door Unlock button (2) on

Your HYUNDAI uses a remote key, which

the remote key.

you can use to lock or unlock the driver

and passenger doors or the rear trunk.

2. The driver’s door will unlock. The

hazard warning lights will blink two

(1) Door Lock

times.

(2) Door Unlock

• Two press unlock setting:

(3) Trunk Unlock

If you press the Door Unlock button

(4) Panic

on the remote key again within

four seconds, then all the doors will

Locking your vehicle

unlock.

To lock your vehicle:

Two press unlock setting can be

1. Make sure all doors, the engine hood

changed according to owner’s

and the trunk are closed.

preference in the cluster User Settings

mode or with the remote key.

2. Press the Door Lock button (1) on the

remote key to lock all doors.

• User settings mode method:

3. If the Door Lock button (1) is pressed

Select or deselect the ‘Two Press

once more within four seconds, the

Unlock’ feature in the User Settings

horn will beep once and the hazard

mode on the cluster LCD display (User

warning lights will blink.

Settings → Door → Two Press Unlock).

4. Make sure the doors are locked by

checking the position of the door lock

Information

button inside the vehicle.

After unlocking the doors, the doors will

automatically relock after 30 seconds

unless a door is opened.

5-4

Trunk unlocking

Mechanical key

To unlock the trunk :

1. Press and hold the Trunk Unlock

button (3) on the remote key for more

than one second.

2. The hazard warning lights will blink

two times and the trunk will be

unlocked.

3. Once the trunk is opened and then

closed, the trunk will automatically

re-lock after 30 seconds.

OIG046004

Information

If the remote key does not operate

normally, you can lock or unlock the

The word “HOLD” is written on the

driver’s door by using the mechanical

button to inform you that you must press

key.

and hold the button for more than one

second.

To unfold the mechanical key, press the

release button on the remote.

Panic button (4)

To return the key to its stored position,

press the release button and fold the key

Press and hold the Panic button (4) for

back into the remote.

more than one second. The horn sounds

and hazard warning lights flash for about

30 seconds.

Remote key precautions

To cancel the panic mode, press any

The remote key will not work if any of the

button on the remote key.

following occur:

• The key is in the ignition switch.

Start-up

• You exceed the operating distance

For information, refer to the “Key

limit (about 30 m [90 feet]).

Ignition Switch” section in chapter 6.

• The remote key battery is weak.

• Other vehicles or objects may be

NOTICE

blocking the signal.

To prevent damaging the remote key:

• The weather is extremely cold.

• Keep the remote key away from

• The remote key is close to a radio

water or any liquid and fire. Internal

transmitter such as a radio station or

circuits may malfunction if the inside

an airport which can interfere with

of the remote key gets damp (from

normal operation of the remote key.

liquids or moisture) or if it is heated.

If the remote key does not work

This can exclude the remote key from

correctly, open and close the door

being covered under warranty.

with the mechanical key. If you have a

• Avoid dropping or throwing the

problem with the remote key contact an

remote key.

authorized HYUNDAI dealer.

• Protect the remote key from extreme

temperatures.

5-5

Convenience Features

If the remote key is in close proximity to

Battery replacement

your mobile phone, the signal could be

blocked by your mobile phone’s normal

operational signals. This is specifically

relevant when the phone is active such

as making and receiving calls, text

messaging, and/or sending/receiving

emails.

When possible, avoid placing the remote

key and your mobile phone in the same

location such as a pants or jacket pocket

in order to avoid interference between

the two devices.

OPD046002

If the remote key is not working properly,

Information

try replacing the battery with a new one.

This device complies with Industry

Battery Type: CR2032

Canada RSS-210 standard.

To replace the battery:

Operation is subject to the following three

1. Insert a slim tool into the slot and

conditions:

gently pry open the cover.

1. This device may not cause harmful

2. Using a screw driver, remove the

interference.

battery cover.

2. This device must accept any

3. Remove the old battery and insert the

interference received, including

new battery. Make sure the battery

interference that may cause undesired

position is correct.

operation.

4. Reinstall the battery cover and key

3. Changes or modifications not expressly

cover in the reverse order of removal.

approved by the party responsible

for compliance could void the user’s

If you suspect your remote key might

authority to operate the device.

have sustained some damage, or you feel

your remote key is not working correctly

NOTICE

contact an authorized HYUNDAI dealer.

Keep the remote key away from

electromagnetic materials that block

electromagnetic waves to the key

surface.

5-6

Smart Key (if equipped)

Information

Type A

An inappropriately disposed

battery can be harmful to

the environment and human

health. Dispose of the battery

according to your local law(s) or

regulations.

IC WARNING

This device complies with Industry

ODN8059006

Canada licence-exempt RSS

Type B

standard(s).

Operation is subject to the following

two conditions: (1) this device may not

cause interference, and (2) this device

must accept any interference, including

interference that may cause undesired

operation of the device.

ODN8059007

Your HYUNDAI uses a smart key, which

you can use to lock or unlock a door (and

trunk) and even start the engine even just

carrying the key.

(1) Door Lock

(2) Door Unlock

(3) Trunk Open

(4) Panic

(5) Remote Smart Parking Assist

(rearward)

(6) Remote Smart Parking Assist

(forward)

(7) Remote Start

5-7

Convenience Features

Locking your vehicle (Button type)

CAUTION

When you leave your vehicle with

the smart key, make sure to press the

button on the front door handle to lock

the doors after close all of the doors,

the hood and the trunk. If you do not

press the button, the doors might not

be locked so please use caution.

WARNING

Do not leave the Smart Key in your

ODN8059001

vehicle with unsupervised children.

1. Close all of the doors, the hood and

Unattended children could press the

the trunk.

Engine Start/ Stop button and may

operate power windows or other

2. Make sure you have the smart key in

your possession and press either the

controls, or even make the vehicle

move, which could result in serious

button on the door handle or the Door

Lock button (1) on the smart key.

injury or death.

3. The doors, the hood and the trunk are

locked. The chime will sound once

and the hazard warning lights will

blink.

• The door handle button will only

operate when the smart key is within

0.7~1 m (28~40 inches) from the

outside door handle.

• Make sure the doors are locked by

pulling the door handle.

5-8

Unlocking your vehicle

(When the Two Press Unlock feature

is off)

is on)

Button type

1. Make sure you have the smart key in

your possession.

2. Press the Door Unlock button (2) on

the smart key, press the button on the

front door handle or touch the door

unlock sensor inside of the front door

handle to unlock the doors.

3. The driver’s door will unlock.

4. If you press the button on the front

door handle or touch the door unlock

sensor inside of the front door handle

ODN8059001

Make sure you have the smart key in

to unlock the doors within 4 seconds,

all of the doors unlock. When the

your possession.

doors unlock, the hazard warning

Press the Door Unlock button (2) on

lights will blink two times and the

the smart key, press the button on the

chime will sound.

front door handle unlock the doors.

• The door handle button will only

All of the doors will unlock. When the

operate when the smart key is within

doors unlock, the hazard warning

0.7~1 m (28~40 inches) from the

lights will blink two times and the

outside door handle.

chime will sound.

• If you do not open the door after

•

The door handle button will only

unlocking within 30 seconds, it will

operate when the smart key is within

return to the lock mode.

0.7~1 m (28~40 inches) from the

• The factory default setting is in off

outside door handle.

mode so you should set in the User’s

•

If you do not open the door after

Settings mode.

unlocking within 30 seconds, it will

• If you unlocked the door with the door

return to the lock mode.

handle, the doors cannot be unlocked

•

If you unlocked the door with the door

with the sensor within 2 seconds.

handle, the doors cannot be locked

with the sensor within 2 seconds.

5-9

Convenience Features

Two Press Unlock Feature

Smart Key Reminder

The priority for unlocking the driver door

If the smart key is in the vehicle and

only, or unlocking all the doors with

any door is opened, the doors will not

one press may be adjusted in the User

lock even though the lock button of the

Settings mode in the cluster LCD display.

central door lock switch is pressed.

The Two Press Unlock feature, when

enabled, will require the user to press

Trunk opening

the door unlock button once for driver

To open:

door only and twice for unlocking all the

1. Make sure you have the smart key

doors.

in your possession and either press

Select or Deselect the Two Press Unlock

inside the trunk emblem or press the

feature in the User Settings mode in the

Trunk Unlock button (3) on the smart

cluster LCD display. The option can be

key for more than one second.

found under the following menu:

2. Once the trunk is opened, the hazard

warning lights will blink two times.

User Settings → Door → Two Press Unlock

• The trunk handle button will only

operate when the smart key is within

The Two Press Unlock feature can also be

0.7~1 m (28~40 inches) from the

enabled or disabled by pressing the door

outside door handle.

lock and unlock buttons simultaneously

on the Key FOB:

• Once the trunk is opened and then

closed, the trunk will automatically

Press and hold both the Door Lock

re-lock and the hazard warning will

button and the Door Unlock button

blink once.

simultaneously until the hazard warning

• If you leave the smart key and close

lights blink.

the trunk, the chime will sound for 5

This will enable or disable the Two Press

seconds. In the case, the trunk cannot

Unlock feature. Repeat this procedure to

be locked so open it with the trunk

enable/disable the mode again.

handle button.

Panic button

Information

Press and hold the Panic button (4) for

If you press the front passenger outside

more than one second. The horn sounds

door handle with the smart key in your

and hazard warning lights blink for about

possession, all the doors will unlock.

30 seconds. To cancel the panic mode,

press any button on the Smart Key.

5-10

Start-up

Remote start

You can start the vehicle without

You can start the vehicle using the

inserting the key.

Remote Start button (7) of the smart key.

For information, refer to the “Engine

To start the vehicle remotely:

Start/Stop Button” section in chapter 6.

• Lock the doors by pressing the door

lock button within 10 m (32 feet)

NOTICE

distance from the vehicle.

• Press the remote start button for over

To prevent damaging the smart key:

2 seconds within 4 seconds after

•

Keep the smart key in a cool,

locking the doors and the hazard

dry place to avoid damage or

warning will blink.

malfunction. Exposure to moisture

or high temperature may cause

To turn off the remote start function,

press the remote start button once.

the internal circuit of the smart key

to malfunction which may not be

In case of the manual operation,

the climate control system will be

covered under warranty.

maintained even when the engine is

•

Avoid dropping or throwing the

turned OFF. However, the automatic

smart key.

operation is set to 22°C (72°F).

•

Protect the smart key from extreme

temperatures.

Remote smart parking assist (RSPA)

(if equipped)

The Remote smart parking assist (RSPA)

system helps the drivers park their

vehicle by using sensors to measure

parking spaces and control the steering

wheel, gear shift and vehicle speed to

semi-automatically park the vehicle.

With the smart key, the driver can move

the vehicle forward or backward using

the rearward /forward buttons (5, 6) on

the smart key.

For information, refer to “Remote smart

parking assist (RSPA)” in this chapter.

5-11

Convenience Features

Mechanical key

Loss of a smart key

If the Smart Key does not operate

A maximum of two Smart Keys can be

normally, you can lock or unlock the

registered to a single vehicle. If you

driver’s door by using the mechanical

happen to lose your smart key, you

key.

should immediately take the vehicle

and remaining keys to your authorized

HYUNDAI dealer or tow the vehicle, if

necessary.

Smart key precautions

The smart key may not work if any of the

following occur:

• The smart key is close to a radio

transmitter such as a radio station or

an airport which can interfere with

normal operation of the transmitter.

OFE048007

• The smart key is near a mobile two

way radio system or a cellular phone.

To remove the mechanical key from the

smart key FOB, slide the release lever in

• Another vehicle’s smart key is being

the direction of the arrow (1) and then

operated close to your vehicle.

pull the mechanical key (2) outward.

If the smart key does not work correctly,

To unlock the vehicle using the

open and close the door with the

mechanical key. insert the mechanical

mechanical key. If you have a problem

key into the key hole in the driver door.

with the smart key, contact an authorized

HYUNDAI dealer.

To reinstall the mechanical key into the

FOB, insert the key in the top of the key

If the smart key is in close proximity to

FOB and push inward until a click sound

your mobile phone, the signal could be

is heard.

blocked by your mobile phone’s normal

operational signals. This is specifically

relevant when the phone is active such

as making and receiving calls, text

messaging, and/or sending/receiving

emails. When possible, avoid keeping the

smart key and your mobile phone in the

same location such as a pants or jacket

pocket in order to avoid interference

between the two devices.

5-12

Battery replacement

Information

This device complies with Industry

Canada RSS-210 standard.

Operation is subject to the following three

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any

interference received, including

interference that may cause undesired

operation.

OFE048009

3. Changes or modifications not expressly

approved by the party responsible

for compliance could void the user’s

authority to operate the device.

NOTICE

Keep the smart key away from

electromagnetic materials that blocks

electromagnetic waves to the key

surface.

ODN8059266

NOTICE

If the Smart Key is not working properly,

Always have the smart key with you

try replacing the battery with a new one.

when leaving the vehicle. If the smart

Battery Type: CR2032

key is left near the vehicle, the vehicle

battery may be discharged.

To replace the battery:

1. Remove the mechanical key.

2. Use a slim tool to pry open the rear

cover of the smart key.

3. Remove the old battery and insert the

new battery. Make sure the battery

position is correct.

4. Reinstall the rear cover of the smart

key.

If you suspect your smart key might have

sustained some damage, or you feel

your smart key is not working correctly,

contact an authorized HYUNDAI dealer.

5-13

Convenience Features

Immobilizer System

Information

An inappropriately disposed

The immobilizer system protects your

vehicle from theft. If an improperly

battery can be harmful to the

environment and human health.

coded key (or other device) is used, the

engine’s fuel system is disabled.

Dispose of the battery according

to your local law(s) or regulation.

When the ignition switch is placed in

the ON position, the immobilizer system

indicator should come on briefly, then

IC WARNING

go off. If the indicator starts to blink, the

This device complies with Industry

system does not recognize the coding

Canada licence-exempt RSS

of the key. Turn the ignition switch to

standard(s).

the LOCK/OFF position, then turn the

ignition switch to the ON position again.

Operation is subject to the following

two conditions: (1) this device may not

In some circumstances, the vehicle may

cause interference, and (2) this device

not recognize your smart key if another

must accept any interference, including

smart key device is nearby or a metal

interference that may cause undesired

object such as a key chain is causing

operation of the device.

interference with the smart key.

If this occurs, your vehicle may not

start. Remove any metal objects or

additional keys near the smart key before

attempting to start the vehicle again.

If the system repeatedly does not

recognize the coding of the key, it is

recommended that you contact your

HYUNDAI dealer.

Do not attempt to alter this system

or add other devices to it. Electrical

problems could result that may make

your vehicle inoperable.

WARNING

In order to prevent theft of your

vehicle, do not leave spare keys

anywhere in your vehicle. Your

immobilizer password is a customer

unique password and should be kept

confidential.

NOTICE

The transponder in your key is an

important part of the immobilizer

system. It is designed to give years

of trouble-free service, however you

should avoid exposure to moisture,

static electricity and rough handling.

Immobilizer system malfunction could

occur.

5-14

1. To activate the password, turn

Information

the ignition key “ON” and “OFF“

This device complies with Industry

according to the digit numbers. The

Canada RSS-210 standard.

immobilizer indicator will blink along

Operation is subject to the following three

with the operation of the ignition

conditions:

key. For example, turn the ignition

key once for digit number “1”, and

1. This device may not cause harmful

twice for “2”, and so on. For the digit

interference.

number “0”, you must cycle the

2. This device must accept any

ignition key 10 times.

interference received, including

2. Wait for 3~10 seconds.

interference that may cause undesired

operation.

3. You may set the remaining number of

digits by following steps 1 and 2.

3. Changes or modifications not expressly

approved by the party responsible

4. If all of the four password digits have

for compliance could void the user’s

been successfully entered, turn the

authority to operate the device.

ignition key “ON” and check that the

immobilizer indicator illuminates.

“Limp Home” Mode and Related

From this time, you have to start your

Procedures

engine within 30 seconds. If you try

to start your engine after 30 seconds,

If the immobilizer warning indicator

your engine will not start.

blinks for five seconds when the ignition

key is turned to the “ON” position,

this indicates the immobilizer system

NOTICE

requires service. The engine cannot be

If the engine stalls while driving in the

started without using the procedure

“limp home” mode, you can start your

below.

engine within 3 seconds without re-

The following procedure describes

entering the password.

how to start the engine using the limp

home function (0, 1, 2, 3 as a sample

If the immobilizer indicator blinks for

password).

five seconds, you must re-enter the

password (steps 1~4).

NOTICE

After performing the limp home

You can get a limp home password

activation procedure, consult with your

when the vehicle is first delivered to

authorized HYUNDAI dealer as soon as

you. If you do not have a password,

possible.

consult your authorized HYUNDAI

dealer.

CAUTION

• If the password is entered incorrectly

three consecutive times, wait for

about one hour to perform the limp

home activation procedure again.

• If you cannot start your engine using

the limp home activation procedure,

have your vehicle towed by an

authorized HYUNDAI dealer.

5-15

Convenience Features

Door locks

Operating Door Locks from

When closing the door, push the door by

hand. Make sure that doors are closed

Outside the Vehicle

securely.

Mechanical key

Smart key

ODN8059011

If you lock the driver’s door with a

ODN8059001

mechanical key, all vehicle doors will

Press the button on the driver’s outside

lock. If you unlock the driver’s door with

door handle while carrying the Smart Key

a mechanical key, you can open and

with you or press the Door Unlock button

close the driver’s door only.

on the Smart Key, the driver’s door will

Once the doors are unlocked, they may

unlock.

be opened by pulling the door handle.

If you press the button on the front

When closing the door, push the door by

passenger’s outside door, all doors will

hand. Make sure that doors are closed

unlock.

securely.

Once the doors are unlocked, they may

Remote key

be opened by pulling the door handle.

When closing the door, push the door by

hand. Make sure that doors are closed

securely.

Information

• In cold and wet climates, door lock

and door mechanisms may not work

properly due to freezing conditions.

• If the door is locked/unlocked multiple

times in rapid succession with either

ODN8059279L

the vehicle key or door lock switch, the

system may stop operating temporarily

To lock the doors, press the Door Lock

in order to protect the circuit and

button (1) on the remote key.

prevent damage to system components.

Press the Door Unlock button (2) on the

• Two press unlock setting can be

remote key, the driver’s door will unlock.

changed in the User Settings mode on

If you press the Door Unlock button

the cluster.

on the remote key again within four

seconds, then all the doors will unlock.

Once the doors are unlocked, they may

be opened by pulling the door handle.

5-16

In case of an emergency

Operating Door Locks from

Inside the Vehicle

With the door handle

ODN8059291

If the electrical power door lock switch

ODN8059012

is not operating (ex. dead car battery)

the only way to lock the door(s) is

Front door

with the mechanical key from the out-

If the inner door handle is pulled when

side key hole.

the door is locked, the door will unlock

and open.

Doors without an outside key hole

can be locked as follows:

Rear door

1. Open the door.

If the inner door handle is pulled once

2. Insert the key into the emergency

when the door is locked, the door will

door lock hole and turn the key

unlock.If the inner door handle is pulled

horizontally to lock.

once more, the door will open.

3. Close the door securely.

i Information

If the electrical power to door lock

switch is not operating (ex. dead car

battery) and the trunk is closed, you

will not be able to open the trunk until

power is restored.

5-17

Convenience Features

With the central door lock switch

Information

Driver’s door

If a power door lock ever fails to function

while you are in the vehicle try one or

more of the following techniques to exit:

• Operate the door unlock feature

repeatedly (both electronic and

manual) while simultaneously pulling

on the door handle.

• Operate the other door locks and

handles, front and rear.

• Lower a front window and use the

mechanical key to unlock the door from

ODN8A059013

outside.

Front passenger’s door

ODN8059014

• When pressing the (

) portion (1) of

the switch, all vehicle doors will lock.

- If the key is in the ignition switch

and any door is opened, the doors

will not lock even though the lock

button (1) of the central door lock

switch is pressed.

- If the smart key is in the vehicle

and any door is opened, the doors

will not lock even though the lock

button (1) of the central door lock

switch is pressed.

• When pressing the (

) portion (2)

of the switch, all vehicle doors will

unlock.

• Doors indicating light (3)

When all vehicle doors are locked, the

indicating lights on the driver’s door

and passenger’s door will turn on. If

any door is unlocked, it would go off.

5-18

WARNING

• The doors should always be fully

If you stay in the vehicle for a long time

closed and locked while the

while the weather is very hot or cold,

vehicle is in motion. If the doors

there are risks of injuries or danger to

are unlocked, the risk of being

life. Do not lock the vehicle from the

thrown from the vehicle in a crash is

outside when someone is in the vehicle.

increased.

• Do not pull the inner door handle of

WARNING

the driver’s or passenger’s door while

the vehicle is moving.

Opening a door when something is

approaching may cause damage or

injury. Be careful when opening doors

and watch for vehicles, motorcycles,

WARNING

bicycles or pedestrians approaching the

Do not leave children or animals

vehicle in the path of the door.

unattended in your vehicle. An enclosed

vehicle can become extremely hot,

causing death or serious injury to

unattended children or animals who

cannot escape the vehicle.

Children might operate features of the

vehicle that could injure them, or they

could encounter other harm, possibly

from someone gaining entry to the

vehicle.

WARNING

Always secure your vehicle.

Leaving your vehicle unlocked increases

the potential risk to you or others from

someone hiding in your vehicle.

To secure your vehicle, while depressing

the brake, move the shift button to the

P (Park) position, engage the parking

brake, and place the ignition switch

in the LOCK/OFF position, close all

windows, lock all doors, and always

take the key with you.

CAUTION

Opening a door when something is

approaching may cause damage or

injury. Be careful when opening doors

and watch for vehicles, motorcycles,

bicycles or pedestrians approaching the

vehicle in the path of the door.

5-19

Convenience Features

Automatic Door Lock and Unlock

Child-Protector Rear Door Locks

Features

Your vehicle is equipped with features

that will automatically lock or unlock

your vehicle based on settings you select

in the LCD cluster display.

Auto LOCK - Enable on Speed

When this feature is set in the LCD

cluster display, all the doors will be

locked automatically when the vehicle

exceeds 15 km/h (9 mph).

ODN8059015L

Auto LOCK - Enable on Shift

The child safety lock is provided to help

prevent children seated in the rear from

When this feature is set in the LCD

accidentally opening the rear doors. The

cluster display, all the doors will be

rear door safety locks should be used

locked automatically when the vehicle is

whenever children are in the vehicle.

shifted out of P (Park) while the engine is

running.

The child safety lock is located on the

edge of each rear door. When the child

Auto UNLOCK - Enable on Shift

safety lock is in the lock position, the

rear door will not open if the inner door

When this feature is set in the LCD

handle is pulled.

cluster display, all the doors will be

unlocked automatically when the vehicle

To lock the child safety lock, insert a

is shifted back into P (Park).

small flat blade tool (like a screwdriver or

similar) (1) into the slot and turn it to the

For more information on these features,

lock position as shown.

refer to the LCD Display section later in

this chapter.

To allow a rear door to be opened from

inside the vehicle, unlock the child safety

lock.

Additional Unlock Safety Feature -

Air Bag Deployment

As an additional safety feature, all doors

WARNING

will be automatically unlocked when an

If children accidently open the rear

impact causes the air bags to deploy.

doors while the vehicle is in motion,

they could fall out of the vehicle. The

rear door safety locks should always

be used whenever children are in the

vehicle.

5-20

Rear Occupant Alert (ROA)

CAUTION

System

• The system does not actually detect

The Rear Occupant Alert (ROA) system

objects or people in the rear seat. By

is provided to help prevent exiting the

using a rear door opened and closed

vehicle with the rear passenger left in the

history, the system indicates that

vehicle. When you open the front door

there may be something in the rear

after opening and closing the rear door

seat.

and turning off the engine, the “Check

• The rear door opened and closed

rear seats” warning message appears on

history can be initialized only when

the cluster.

you turn off the engine normally, get

off the vehicle and lock the door with

Cluster

the remote control key. Therefore,

there could be alarms even though

the back doors are locked.

ex) When you get in and drive your

vehicle without locking the doors

after the alarm sounds, there could

be the alarm sounds if you turn off

the engine and open the driver’s seat

door.

WARNING

ODN8A059339

Steering wheel

It does not use the actual sensors but it

provides the alarm sounds by checking

the rear door lock/unlock status as a

reminder.

ODN8A059134

5-21

Convenience Features

Vehicle Auto-Shut Off Function

Operating conditions

If your parked vehicle in a garage is on

Vehicle Auto-Shut Off timer activates

for a period of time, the engine turns

when the following conditions are met.

off automatically to prevent carbon

• Ignition [ON] or engine running

monoxide poisoning.

• Shift button is in P (Park) position

• Unfastened driver’s seat belt

System setting

• Even one of the doors opens

Select ‘User Settings → Convenience →

Vehicle Auto-Shut Off’ in the LCD display.

Deactivations

• In case of selecting “Disable” for

Vehicle Auto-Shut Off in the User

Settings mode (30 min. based timer is

reset automatically if you restart.)

• Gear shift other than P

• Fastened driver’s seat belt

• Step on the brake or accelerator

System operation

ODN8A059340

At the set time on Vehicle Auto-Shut Off

timer, the engine turns off automatically.

5-22

ThefT-AlArm SySTem

This system helps to protect your vehicle

Information

and valuables. The horn will sound and

the hazard warning lights will blink

•

Do not lock the doors until all

continuously if any of the following

passengers have left the vehicle. If the

occur:

remaining passenger leaves the vehicle

when the system is armed, the alarm

- A door is opened without using the

will be activated.

remote key or smart key.

•

If the vehicle is not disarmed with the

- The trunk is opened without using the

remote key or smart key, open the

remote key or smart key.

doors by using the mechanical key

- The engine hood is opened.

and place the ignition switch in the

The alarm continues for 30 seconds, then

ON position (for remote key) or start

the system resets. To turn off the alarm,

the engine (for smart key) by directly

unlock the doors with the remote key or

pressing the ignition switch with the

smart key.

The Theft Alarm System automatically

•

If the system is disarmed by unlocking

sets 30 seconds after you lock the doors

the vehicle, but neither a door or the

and the trunk. For the system to activate,

trunk is opened within 30 seconds, the

you must lock the doors and the trunk

doors will relock and the system will

from outside the vehicle with the remote

rearm automatically.

key or smart key or by pressing the

button on the outside of the door handle

with the smart key in your possession.

The hazard warning lights will blink and

the chime will sound once to indicate the

system is armed.

Once the security system is set, opening

any door, the trunk, or the hood without

using the remote key or smart key will

cause the alarm to activate.

The Theft Alarm System will not set if the

hood, the trunk, or any door is not fully

closed. If the system will not set, check

the hood, the trunk, or the doors are fully

closed.

Do not attempt to alter this system or

add other devices to it.

5-23

Convenience Features

Driver poSiTion memory SySTem (if eQUippeD)

Storing Positions into Memory

1. Shift to P (Park) while the ignition

switch is in the ON position.

2. Adjust the driver’s seat position, side

view mirror position, instrument panel

illumination intensity and head-up

display height/brightness to positions

comfortable for the driver.

3. Press the SET button. The system

will beep once and notify you “Press

ODN8A059019

button to save settings” on the cluster

LCD display.

The Driver Position Memory System is

provided to store and recall the following

4. Press one of the memory buttons (1

memory settings with a simple button

or 2) within 4 seconds. The system

operation.

will beep twice when the memory has

been successfully stored.

- Driver’s seat position (Power seat)

5. “Settings 1 (or 2) saved” will appear on

- Side view mirror position

the cluster LCD display.

- Instrument panel illumination intensity

- Head Up Display (HUD) position and

brightness (if equipped)

WARNING

Never attempt to operate the driver

position memory system while the

vehicle is moving.

This could result in loss of control, and

an accident causing death, serious

injury, or property damage.

Information

• If the battery is disconnected, the

memory settings will be erased.

• If the Driver Position Memory System

does not operate normally, have the

system checked by an authorized

HYUNDAI dealer.

5-24

Recalling Positions from Memory

Resetting the Driver’s Seat

1. Shift to P (Park) while the ignition

Memory System

switch is in the ON position.

Take the following procedures to reset

2. Press the desired memory button

the driver’s seat memory system, when it

(1 or 2). The system will beep once,

does not operate properly.

and then the driver’s seat position,

side view mirror position, instrument

To reset the driver’s seat memory

panel illumination intensity and

system

head-up display height/brightness

1. Place the ignition switch to the ON

will automatically adjust to the stored

position, shift to P (Park), and open

positions.

the driver’s door.

3. “Settings 1 (or 2) applied” will appear

2. Operate the control switch to set

on the cluster LCD display.

the driver’s seat and seatback to the

If your vehicle is equipped with

foremost position.

additional navigation, please refer to the

3. Simultaneously press the SET button

infotainment system manual separately

and push forward the seat movement

supplied.

switch over 2 seconds.

While resetting the driver’s seat

Information

memory system

•

While recalling the “1” memory

1. It starts with the notification sound.

position, pressing the SET or 1 button

temporarily stops the adjustment of

2. The driver’s seat and seatback is

the recalled memory position. Pressing

adjusted to the rearward position with

the 2 button recalls the “2” memory

the notification sound.

position.

3. The driver’s seat and seatback is

•

While recalling the “2” memory

re-adjusted to the default position

position, pressing the SET or 2 button

(central position) with the notification

temporarily stops the adjustment of

sound.

the recalled memory position. Pressing

However, in the following cases, the

the 1 button recalls the “1” memory

resetting procedure and the notification

position.

sound may stop.

•

While recalling the stored positions,

- The memory button is pressed.

pressing one of the control buttons

- The control switch is operated.

for the driver’s seat, side view mirror,

instrument panel illumination or head-

- The gear is shifted out of P (Park) .

up display will cause the movement of

- The driving speed exceeds 3 km/h (2

that component to stop and move in

mph).

the direction that the control button is

- The driver’s door is closed.

pressed.

5-25

Convenience Features

NOTICE

Easy Access Function

•

Reattempt to do the resetting

The system will move the driver’s seat

procedure again, when the resetting

automatically as follows:

procedure incompletely stops or the

• It will move the driver’s seat rearward

notification sound do not stop.

when the Engine Start/Stop button is

•

Make sure that there is no obstacle

pressed to the OFF position.

around the driver’s seat in advance

• It will move the driver’s seat forward

of resetting the driver’s seat memory

when the Engine Start/Stop button is

system.

pressed to the ACC or START position.

You can activate or deactivate the Easy

Access Function from the User Settings

mode in the cluster LCD display.

‘Convenience → Seat Easy Access →

Off/Normal/Extended’.

For more information, refer to “LCD

Display” in chapter 4.If your vehicle is

equipped with additional navigation,

please refer to the infotainment system

manual separately supplied.

CAUTION

Driver should be cautious when using

this function to assure no injury to

passenger or child on the back seat.

In case of emergency the driver has to

stop movement of front seat (when easy

access feature is activated) by pressing

SET button or any of the driver seat

control switches.

5-26

steering Wheel

Electric Power Steering (EPS)

Information

The system assists you with steering the

The following symptoms may occur during

vehicle. If the vehicle is turned off or

normal vehicle operation:

if the power steering system becomes

•

The steering effort may be high

inoperative, you may still steer the

immediately after placing the ignition

vehicle, but it will require increased

switch in the ON position.

steering effort.

This happens as the system performs

Also, the steering effort becomes heavier

the EPS system diagnostics. When the

as the vehicle’s speed increases and

diagnostics are completed, the steering

becomes lighter as the vehicle’s speed

wheel effort will return to its normal

decreases for better control of the

condition.

steering wheel.

•

When the battery voltage is low, you

Should you notice any change in the

might have to put more steering effort.

effort required to steer during normal

However, it is a temporary condition so

vehicle operation, have the system

that it will return to normal condition

checked by an authorized HYUNDAI

after charging the battery.

dealer.

•

A click noise may be heard from the

EPS relay after the ignition switch is in

CAUTION

the ON or LOCK/OFF position.

• If the Electric Power Steering System

•

Motor noise may be heard when the

does not operate normally, the

vehicle is at a stop or at a low driving

warning light (

) will illuminate

speed.

on the instrument cluster. You may

•

When you operate the steering wheel

steer the vehicle, but it will require

in low temperatures, abnormal noise

increased steering efforts. Take your

may occur. If the temperature rises, the

vehicle to an authorized HYUNDAI

noise will disappear. This is a normal

dealer and have the system checked

condition.

as soon as possible.

•

When an error is detected from the

• When an abnormality is detected

EPS, the steering effort assist function

in the electric power steering

may become inoperative in order to

system, to prevent a an accident, the

prevent fatal accidents. Instrument

steering assist function may become

cluster warning lights may be on or the

inoperative. At this time, the warning

steering effort may be high. If these

light turns on or blinks on the cluster.

symptoms occur, drive the vehicle to

The steering wheel may become

a safe area as soon as it is safe to do

difficult to control or operate. Have

so. Have the system checked by an

your vehicle checked immediately,

authorized HYUNDAI dealer as soon

after moving the vehicle to a safe

as possible.

area.

5-27

Convenience Features

Tilt Steering / Telescope Steering

When adjusting the steering wheel to a

comfortable position, adjust the steering

wheel so that it points toward your chest,

not toward your face. Make sure you can

see the instrument cluster warning lights

and gauges. After locking the lever, push

the steering wheel both up and down to

be certain it is locked in position. Always

adjust the position of the steering wheel

before driving.

ODN8059021

To adjust the steering wheel angle and

WARNING

height:

NEVER adjust the steering wheel while

1. Pull down the lock-release lever (1).

driving. This may cause loss of vehicle

2. Adjust the steering wheel to the

control resulting in an accident.

desired angle (2) and distance

forward/back (3).

3. Pull up the lock-release lever to lock

the steering wheel in place.

Information

Sometimes the lock release lever may not

engage completely. This may occur when

the gears of the locking mechanism do not

completely mesh. If this occurs, pull down

on the lock release lever, readjust the

steering wheel again, and then pull back

up on the release lever to lock the steering

wheel in place.

CAUTION

While adjusting the steering wheel

height, please do not push or pull it

hard since the fixture can be damaged.

5-28

Heated Steering Wheel

To turn the heated steering wheel off,

press the button again. The indicator on

(if equipped)

the button will turn off.

Type A

•

The heated steering wheel defaults

to the OFF position whenever the

ignition switch is in the ON position.

However, if the Auto Comfort Control

function is ON, the heated steering

wheel will turn on and off depending

on the outside temperature.

•

Auto Comfort Control (for driver’s

seat) (if equipped)

The heated steering wheel

ODN8059103

automatically controls the steering

Type B

wheel temperature depending on

the ambient temperature when

the engine is running. If the heated

steering wheel switch is pushed, the

heated steering wheel will have to be

controlled manually.

To use this function, it must be

activated from the Settings menu

in the infotainment system screen.

For more information, refer to the

separately supplied manual with

ODN8059104

your vehicle.

When the ignition switch is in the ON

position or when the engine is running,

Information

press the heated steering wheel button

to warm the steering wheel. The

The heated steering wheel will turn off

indicator on the button will illuminate.

automatically approximately 30 minutes

after the heated steering wheel is turned

on.

NOTICE

Do not install any cover or accessory

on the steering wheel. This cover or

accessory could cause damage to the

heated steering wheel system.

5-29

Convenience Features

Horn

ODN8059022

To sound the horn, press the area

indicated by the horn symbol on your

steering wheel (see illustration). The

horn will operate only when this area is

pressed.

NOTICE

Do not strike the horn severely to

operate it, or hit it with your fist. Do not

press on the horn with a sharp-pointed

object.

5-30

mirrorS

Inside Rearview Mirror

Day/night rearview mirror

(if equipped)

Before driving your vehicle, check to

see that your inside rearview mirror is

properly positioned. Adjust the rearview

mirror so that the view through the rear

window is properly centered.

WARNING

Make sure your line of sight is not

obstructed. Do not place objects in the

rear seat, cargo area, or behind the rear

head restraints which could interfere

with your vision through the rear

ODN8059025L

window.

[A] : Day, [B] : Night

Make this adjustment before you start

WARNING

driving and while the day/night lever is in

the day position.

To prevent serious injury during an

accident or deployment of the air bag,

Pull the day/night lever towards you to

do not modify the rearview mirror and

reduce glare from the headlamps of the

do not install a wide mirror.

vehicles behind you during night driving.

Remember that you lose some rearview

clarity in the night position.

WARNING

NEVER adjust the mirror while driving.

This may cause loss of vehicle control

resulting in an accident.

NOTICE

When cleaning the mirror, use a paper

towel or similar material dampened

with glass cleaner. Do not spray glass

cleaner directly on the mirror as this

may cause the liquid cleaner to enter

the mirror housing.

5-31

Convenience Features

Electrochromic Mirror (ECM)

Electrochromic mirror (ECM) with

(if equipped)

HomeLink® system (if equipped)

ODN8059023L

ODN8A059135

The electric rearview mirror automatically

Your vehicle may be equipped with

controls the glare from the headlamp of

a Gentex Automatic-Dimming Mirror

the vehicle behind you in nighttime or low

with an Integrated HomeLink® Wireless

light driving conditions.

Control System.

When the engine is running, the glare is

During nighttime driving, this feature

automatically controlled by the sensor

will automatically detect and reduce

mounted in the rearview mirror. The

rearview mirror glare. The HomeLink®

sensor detects the light level around the

Universal Transceiver allows you to

vehicle, and automatically adjusts to

activate your garage door(s), electric

control the headlamp glare from vehicles

gate, home lighting, etc.

behind you.

(1) HomeLink Channel 1

Whenever the shift button is placed in R

(2) HomeLink Channel 2

(Reverse), the mirror will automatically

(3) HomeLink Channel 3

go to the brightest setting in order to

improve the driver’s view behind the

(4) Garage Door Opener Status Indicator :

vehicle.

Closing or Closed

(5) HomeLink Operation Indicator

(6) Garage Door Opener Status Indicator

: Opening or Opened

(7) HomeLink User Interface Indicator

5-32

Automatic-Dimming Night Vision Safety™

WARNING

(NVS^®) Mirror (if equipped)

Before programming HomeLink® to a

The NVS® Mirror automatically reduces

garage door opener or gate operator,

glare by monitoring light levels in the

make sure people and objects are out

front and the rear of the vehicle. Any

of the way of the device to prevent

object that obstructs either light sensor

potential harm or damage. Do not

will degrade the automatic dimming

use the HomeLink® with any garage

control feature.

door opener that lacks the safety

For more information regarding NVS®

stop and reverse features required by

mirrors and other applications, please

federal safety standards (this includes

refer to the Gentex website:

any garage door opener model

www.gentex.com

manufactured before April 1, 1982).

A garage door that cannot detect an

Your mirror will automatically dim

object - signaling the door to stop

upon detecting glare from the vehicles

and reverse does not meet current

traveling behind you.

federal safety standards.Using a garage

door opener without these features

The mirror defaults to the ON position

increases the risk of serious injury or

each time the vehicle is started.

death.

Integrated HomeLink^® Wireless Control

Programming HomeLink^®

System

Please note the following:

The HomeLink® Wireless Control System

can replace up to three hand-held

• When programming a garage door

radio-frequency (RF) transmitters with

opener, it is advised to park the

a single built-in device. This innovative

vehicle outside of the garage.

feature will learn the radio frequency

• It is recommended that a new battery

codes of most current transmitters to

be placed in the hand-held transmitter

operate devices such as gate operators,

of the device being programmed to

garage door openers, entry door locks,

HomeLink® for quicker training and

security systems, even home lighting.

accurate transmission of the radio-

Both standard and rolling code-equipped

frequency signal.

transmitters can be programmed by

• Some vehicles may require the

following the outlined procedures.

Engine Start/Stop button to be in the

Additional HomeLink® information can

ACC (or “Accessories”) position for

be found at: www.homelink.com, www.

programming and/or operation of

youtube.com/HomeLinkGentex or by

HomeLink®.

calling 1-800-355-3515.

• In the event that there are still

Retain the original transmitter of the

programming difficulties or questions

RF device you are programming for use

after following the programming steps

in other vehicles as well as for future

listed below, contact HomeLink® at:

HomeLink® programming. It is also

www.homelink.com, www.youtube.

suggested that upon the sale of the

com/HomeLinkGentex or by calling

vehicle, the programmed HomeLink®

1-800-355-3515.

buttons be erased for security purposes.

5-33

Была ли эта страница вам полезна?

Да!Нет

8 посетителей считают эту страницу полезной.

Hyundai Sonata (2022 year). Manual in english — page 6

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.