| | | ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Remote Control with Digital Key Information To use the remote control function with After reconnecting the vehicle battery your android smartphone, Bluetooth power supply or charging the battery, it must be turned on. may take time to operate due to remote renewal of security information. When you Remote Control Connection with Digital lock or unlock the door with NFC, please Key touch and hold your smartphone on the door handle until it works. 1. Open Hyundai digital key application on the smartphone. Select the When the mobile data connection of the vehicle to activate the remote control smartphone is weak, the remote renewal function as a main vehicle. of security information may fail. In this case, you should lock, unlock or turn on 2. Approach with the activated the vehicle with the card key. When you smartphone app to your vehicle are in the place where the mobile data and you can check whether the connection of your smartphone is available connection is available. If it enables and place your smartphone on the interior your smartphone to connect, connect authentication pad (wireless charger) and with your vehicle by pressing the start up your vehicle or touch the digital connect button. The remote control key on the door handle to lock or unlock function is activated after completing the door, the remote renewal of security the process. information starts automatically. Even though the engine is turned on, please Remote Control Operation with Digital wait until the remote renewal process Key is completed and wireless charger is You can execute the remote control converted to charging mode. operation including door lock/unlock, panic on/off, remote start / remote stop and trunk opening. The icon for CAUTION each function will be highlighted and The engine can be turned on if the alarm/vibration also provided when the registered smartphone or card key is operation is performed. placed on the interior authentication Note that you cannot lock your vehicle pad (wireless charger). Do not leave using the Hyundai digital key app if any unsupervised children or people who of the following occurs: are not aware of the system since it can result in serious injury or death. ś The POWER button is in ACC or ON Always have the registered digital key position. (smartphone) or card key with you to ś Any doors are open. prevent vehicle theft when leaving the When the smartphone and the vehicle vehicle. are connected by the Bluetooth function For more information, refer to the but the remote control command Engine Start/Stop button in chapter 6. cannot be received over 5 minutes, the remote control connection is canceled automatically. 5-20 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Remote Start with Digital Key CAUTION ś When the shift lever of your vehicle ś If metallic window tint was applied is in P (Park) and all of the doors to your vehicle, it may cause including trunk and hood is locked bad Bluetooth connection or and the vehicle is off, press the Door performance degradation of the Lock button in the Hyundai Digital digital key. Key app then press the Remote Start ś If multiple users operate the remote button within 4 seconds. control function simultaneously, the You can confirm the engine is on if the connection between the digital key hazard warning lights blinks two times and the vehicle might result in failed and the chime sounds. commands. Please connect and ś If you want to turn off the engine, operate the remote control function press Remote Engine Stop. Air only with the necessary user. Conditioner / Heating system ś When using the remote control maintains the same status as when operation, the driver (the remote you last used the vehicle. control user) should leave the vehicle ś Unless you put the registered digital after confirming the door lock (the key(smartphone) on the interior chime sounds once and the hazard authentication pad (wireless charger) warning lights blink). when the remote start function is on, ś The remote functions of the Digital the engine will turn off. Key app enable the vehicle to be ś If you do not get into the vehicle controlled from a set distance. If within 10 minutes after the engine the digital key or the vehicle goes turns on, the vehicle will turn off. beyond the operable distance, the For more information, refer to the Engine remote control function might be disconnected or canceled. Start/Stop button in chapter 6. ś If the digital key (smartphone) is Vehicle information Display connected with the vehicle for the remote control, the driver with the The digital key application displays key goes far away from the vehicle, the vehicle information such as the function might not work. driving or door conditions through the communication with the vehicle. ś If the remote control operation is executed where the mobile ś How to check : Select the vehicle connection is weak, Bluetooth what you want to check and touch connection is poor due to several the vehicle image, then vehicle Bluetooth devices or there is an information display page will be object such as metal or concrete, it shown. might be delayed or the operable ś Contents : accumulated odometer, distance might decrease. You should latest fuel economy, driving range, not cover the smartphone with your fuel remaining, tire pressure, doors hand or place other devices which lock/unlock status and last data can cause frequency interference. It updated time. may result in poor performance. à Displayed vehicle data could be ś If the remote control function is not differed from the current vehicle available, please use NFC function to condition. lock or unlock the doors. à For more information, please refer to the ‘Tutorial’ on your Digital key app. 5-21 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Smartphone change/App deletion CAUTION If you change your smartphone or delete ś Do not leave the registered digital the Hyundai Digital Key App, please refer key (smartphone) and card key in to the following to set up your Digital your vehicle. Please carry around Key: your keys all the time. ś If you happen to lose your digital Smartphone Change/ Reset key (smartphone) or card key If you change or reset the smartphone, registered as a main user’s key, you the registered digital key in your previous should immediately delete the key smartphone may not be used. Please on the vehicle’s key menu. For more refer to following procedure to use the information, refer to the Digital Key digital key. Deletion in this chapter. 1. Install the digital key application and ś If you registered your digital key log in. (smartphone) or card key in the 2. If you are the owner, retry the Digital vehicle, a message appears on the key save process. instrument cluster and informs you 3. If you are the sharer, need to re-share that the key is registered. the key from owner. (Message: Digital key(s) active.) ś If you buy a used vehicle, you should App delete & reinstall/ Delete App data confirm the message and delete the registered smartphone key and card You can re-download the digital key from key. In this case, you should carry the server and follow these procedures. your smart key. 1. Reinstall the application and log in. ś If you keep the NFC card of 2. Input the PIN number for user the digital key on the interior verification. authentication pad (wireless 3. If PIN is correct, digital key data charger) while driving, it may cause a will be re-downloaded to your malfunction of the NFC card. smartphone and you can use it ś You should remove your NFC card without any further registration or of the digital key on the interior sharing. authentication pad after turning on the engine. Smartphone operability with Digital Key ś Hyundai digital key app may not The digital key application may not be work properly when the NFC or available to older type smartphones. Bluetooth communication between Please check the available smartphone smartphone and car is poor. models with your dealer. NFC antenna ś If the remote control operation position on the smartphone can be is executed where the mobile confirmed on each smartphone’s manual connection is weak, Bluetooth or contact to customer service center of connection is poor due to other the smartphone manufacturer. Bluetooth devices or there is an object such as metal or concrete, it might be delayed or the operable distance might decrease. You should not cover the smartphone with your hand or place other devices which can cause frequency interference. It may result in poor performance. 5-22 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 ś If the remote control function is not - If you use a smart phone cover that activated, please use NFC function to uses wireless communication or is lock or unlock the doors made of metal, the digital key NFC function may not work properly. ś You should be careful not to press the remote control button Remove the smart phone cover before using the digital key NFC on the digital key (smartphone) function. accidentally. ś The vehicle may not be controlled by ś If the digital key (smartphone) is the smartphone if any of the following discharged or defective or you occurs: cannot use the digital key since the vehicle battery is discharged, use the - Basic and necessary functions of inside door lock button to lock all of the smartphone manufacturer are the doors. operating. (General call, urgent call, audio or NFC payment) - Wireless earphone is operating. CAUTION (General call, urgent call or audio) ś Hyundai digital key app on the - The digital key app function such smartphone and card key may not as basic setting or app launching work if any of the following occurs: is limited by prior policy according - Hyundai digital key app on the to the manufacturer while using a smartphone is deleted. (Required smartphone produced by domestic to reinstall the app) and foreign manufactures. - Account log in information of à If you change the smartphone Hyundai digital key app is expired. number, you should modify the user (Required to re-log in) account information on the HYUNDAI - When you try to log in to another customer web site to use the digital smartphone instead of the key app. registered smartphone with same à If the vehicle owner changes user account. the smartphone device, the new - Smartphone rooting or app smartphone should be registered in hacking is detected. the car after deleting the registered digital key(smartphone). - Smartphone battery or the vehicle battery is discharged. à If a sharer changes or resets the smartphone, the key should be re- - Smartphone’s screen is off or shared from owner. locked. à Some older smartphones may not - NFC or Bluetooth is turned off on work properly. Please check the the smartphone settings. available smartphone models with - Smartphone’s mobile network your dealer. setting is off or airplane mode is à NFC antenna position on the activated. smartphone can be confirmed - A credit card is overlapped in the on each smartphone’s manual or back of your smartphone or metal contact to customer service center or thick case is used. of the smartphone manufacturer. - The card key is overlapped with other credit cards or the key is used as inserted in the wallet or card wallet. 5-23 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Digital key (Card key) 3. Register the NFC card key on the User’s Settings menu after turning on the vehicle. à With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Card Key] then select the [Save] from submenu. à Without navigation screen : From cluster menu, go to [Digital Key] - [Card Key] and select [Save]. The [Save] button will be disabled if ODN8A059243 the digital key (Card key) is already saved. Please refer to “Digital Key Delete” in this manual and follow the digital key delete procedure in your car before Digital key save. 4. Place the NFC card key onto the interior authentication pad (wireless charger). The saving process will begin automatically. 5. If the key is enrolled, the message ODN8A059131 will be displayed on the infotainment screen or instrument cluster. Digital key (Card key) save 1. Install Hyundai digital key app in main user’s smartphone and register ś Once the card key registration mode the digital key (smartphone). Please is activated, the process should be refer to the registration method of the completed within 5 minutes. After digital key (smartphone). then, you should reactivate once 2. Using the [Pair Card Key] menu on again for registration. the digital key application, you can ś For the digital key(card key) saving, activate the Card Key registration the smart key(fob) must be inside the mode. vehicle. à NFC authentication : enter the NFC ś Once a Card key is registered, it authentication menu and touch the cannot be reused in another vehicle. smartphone on the outside door handle. à Bluetooth authentication : enter the Bluetooth authentication menu and press the [OK] button for activation. If you activate the registration mode, you should complete the Card saving process with in 5 minutes. à If you have not registered the digital key (smartphone), please register the digital key (card key) with two smart keys. 5-24 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 ś To delete the saved digital key (card key), the smart key must be inside the vehicle. ś The deleted digital key (card key) can be re-registered before registering a new digital key (card key). ś If you register a new digital key (card key), the previously registered digital key (card key) cannot be used again. ODN8A059243 ODN8A059132 Digital key (Card key) deletion You should have the smart key to delete digital key (card key). Please have the smart key in your possession. 1. Get into the vehicle with the smart key. 2. Delete the NFC card key on the User’s Settings menu after turning on the engine. à With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Card Key] then select the [Delete] from submenu. à Without navigation screen : From cluster menu, go to [Digital Key] - [Card Key] and select [Delete]. If there is no saved digital key(card key), [Delete] menu will not be activated. 5-25 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features If the digital key (card key) does not work, please move the card 4 inches (0.1m) away from the handle authentication pad and retry to touch. If the card key is damaged by impact, it may not operate properly or at all. You should buy a new card and register again. Long-time exposure to high temperature may cause the card key to malfunction. Please be careful not to expose the key to direct sunlight or high temperature. OCN7050128 [1] : Door handle authentication pad NFC door lock/unlock You should touch digital key (card key) to door handle authentication pad (1, marked position near by the lock button) of driver’s (or front passenger’s) outside door for 2 seconds to lock or unlock the doors. If the Two Press Unlock feature is applied (press twice for unlocking), driver’s seat door will be unlocked by touching the digital key (card key). In this state, if you touch one more time within 4 seconds, all the doors unlock. Inoperable condition If you do not touch the digital key (card key) to the center of the door handle authentication pad accurately. it may not work. In addition, if you overlap and use the key with NFC-enabled cards such as transportation card or credit card, it may not work. Note that if you try to lock your vehicle with digital key (card key) in following cases, the doors will not be locked and chime will sound for 3 seconds. ś The Smart Key is in the vehicle. ś The POWER button is in ACC or ON position. ś Any of the doors, hood or trunk are open 5-26 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Start-up with Card key Type A After placing your registered card key onto the interior authentication pad (wireless charger), step on the brake and press the Engine Start/Stop button. WARNING ś If you do not place the digital key (card key) onto the center of the interior authentication pad (wireless charger) exactly, the card key may ODN8A059133 not be recognized. If the engine is Type B not turned on, adjust and place the key again. ś If you overlap and use the key with NFC-enabled cards such as transportation card or credit card, the card key may not be recognized. ś If the digital key (card key) does not work, please move the card 4 inches (0.1m) away from the handle authentication pad and retry to ODN8A059247 touch. Digital key application/cancellation ś If the card key is damaged by impact, it may not operate properly or at If you do not want to use the digital key all. You should buy a new card and (smartphone and card key), you can register again. disable the function temporarily. You should have the smart key when you For more information, refer to the change the settings Engine Start/Stop button in chapter 6. à With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Enable Digital Keys] (deselect) à Without navigation screen : From cluster menu, go to [Digital Key] - [Enable Digital Keys] (deselect) Information If you do not have the smart key in your possession, you cannot deselect [Enable digital keys]. However, if you want to select [Enable digital keys] again, you do not need to have the smart key in your possession. 5-27 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Profile link/unlinked CAUTION Profile link If you uncheck Enable digital keys, it is 6HOHFW 6HWXS Ɵ 8VHU 3URILOH Ɵ impossible to lock or unlock the doors or start up the vehicle with digital keys 3URILOH 6HWWLQJV Ɵ /LQN 'LJLWDO .H\ (Smartphone) on the infotainment such as smartphone and card key. If you check Enable digital keys again, the system menu. registered digital keys(smartphone and 2. Unlock your digital key installed card key) are available. Even though smart phone screen and place it onto you stop the digital key function, the the wireless charger according to a registered keys (smartphone and card message. key) are not deleted. 3. It begins the profile link with a message. Personalized profile and vehicle 4. If you select Link, the registered settings phone number’s digital key and the Connect the registered digital key with user’s profile are linked. personalized profile. Then in case you 5. The interconnection process is lock or unlock the door with the digital completed with a message. key NFC function or unlock the door remotely by digital key application Profile unlink Bluetooth connection, the vehicle will play the personalized user profile 1. Select Digital Key information on settings. Profile connection and infotainment Vehicle Settings menu. It personalization are available for Driver 1 is possible to unlink only if the profile and Driver 2. is interconnected. 2. Profile unlink is completed with a message. Information If you connect both Driver 1 and Driver 2 with a single smartphone, the smartphone digital key always works as Driver 1. If you unlink the Driver 1, personalization function will operate as Driver 2. 5-28 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 PRECAUTION for vehicle profile link and Vehicle personalization operation unlink The personalization function linked with When you link or unlink the profile of digital key works as following conditions: digital key, you should be careful of the ś Touch the driver’s door handle with following. the profile linked smart phone to lock ś Profile link is possible to use with the or unlock the doors (Personalization digital key. (Infotainment Vehicle does not operate when locking or 6HWWLQJV 0RGH Ɵ 'LJLWDO .H\ Ɵ (QDEOH unlocking the front passenger door.) Digital Keys) ś Remote door unlock with the profile ś Profile link information remains even linked smartphone digital key app. when you disable the digital key The profile linked with digital key can be function. changed manually in the infotainment ś Only the smart phone with digital key system setup screen. app enables you to link your profile. (Impossible to link with NFC card) Precaution for digital key profile link and ś Profile link works only when the unlink smart phone and the digital key are Profile operation according to door lock/ registered to the vehicle. The smart unlock system is as follows. phone with another vehicle’s digital key cannot link profile. Personalization Item ś If you remove the smart phone Operation from the wireless charger before Initial value Guest completing the profile link, it does not work. Profile linked smart phone Linked profile ś To unlink the profile, the smart phone key does not need to be on the wireless charger. Profile unlinked smart phone key Recently activated profile NFC card key Smart key ś The personalization function using the digital key can be operated after linking the digital key on the infotainment system profile menu. ś You should use the personalization function only when the vehicle is safely parked. 5-29 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Vehicle personalization with digital key The available personalization function in the vehicle is as follows. System Personalization Item Lamp Blink number of one-touch signal lamps USM Door Automatic door lock/unlock, Two Press Unlock Preferred volume of the navigation system, Recent Navigation destination AVN User preset Radio preset Bluetooth Bluetooth preferential connect Latest operation setup of the following functions: Air conditioning (for automatic Operating Temperature, AUTO, air flow direction, air volume, climate control condition air conditioner, air intake control, SYNC, Front system) windshield defroster, OFF For more information of personalization, refer to the infotainment system manual. CAUTION If you leave the digital key after locking or unlocking the doors or starting up the vehicle with the smart key, the doors can be locked by the central door lock. Please carry the digital key at all times. 5-30 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 DOOR LOCKS Operating Door Locks from Information Outside the Vehicle Be careful when locking the door by Mechanical key mechanical key operation, only the driver’s door can be locked/unlocked. Refer to Chapter 5 “Operating door locks from inside the vehicle” to lock from inside the vehicle. Information When removing the cover, be careful not to lose cover and any scratches. When the key cover freezes and does not open, lightly tap or indirectly warm(hand OCN7050009 temperature, etc.) it. 1. Press the lever located under the cover with mechanical key. (1) Do not apply excessive force to the door and door handle. It may be damaged. 2. While pushing the lever so that the mechanical key does not fall out of the cover hole, slowly push it towards the rear of the vehicle and remove the cover. (2) 3. After removing the cover, only driver’s door can be locked or unlocked by using mechanical key. 4. Turn the key toward the rear of the vehicle to lock and toward the front of the vehicle to unlock. (3) If you lock/unlock the driver’s door with a key, the driver’s door will lock/ unlock automatically. Once the door is unlocked, it may be opened by pulling the door handle. Make sure that doors are closed securely. 5-31 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Remote key Smart key ODN8059279L OCN7050078 To lock the doors, press the button on To lock the doors, press the Door Lock the outside door handle while carrying button (1) on the remote key. the smart key with you or press the door To unlock the doors, press the Door lock button on the smart key. Unlock button (2) on the remote key. To unlock the doors, press the button on Once the doors are unlocked, they may the outside door handle while carrying be opened by pulling the door handle. the smart key with you or press the door When closing the door, push the door by unlock button on the smart key. hand. Make sure that doors are closed Once the doors are unlocked, they may securely. be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely. Information ś In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions. ś If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components. ś Two press unlock setting can be changed in the User Settings mode on the cluster. 5-32 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Operating Door Locks from With the central door lock switch Inside the Vehicle Driver’s door With the door handle OCN7050011 Front passenger’s door OCN7050010 Front door If the inner door handle is pulled when the door is locked, the door will unlock and open. Rear door If the inner door handle is pulled once when the door is locked, the door will OCN7050083N unlock. If the inner door handle is pulled once more, the door will open. ś When pressing the ( ) portion (1) of the switch, all vehicle doors will lock. If any door is opened, the doors will not - If any door is opened, the doors will lock even though the central door lock not lock even though the central switch is pressed. door lock switch (1) is pressed. ś When pressing the ( ) portion (2) of the switch, all vehicle doors will Information unlock. If a power door lock ever fails to function ś Doors indicating light (3) while you are in the vehicle try one or more of the following techniques to exit: When all vehicle doors are locked, the indicating lights on the driver’s door ś Operate the door unlock feature and passenger’s door will turn on. If repeatedly (both electronic and any door is unlocked, it would go off. manual) while simultaneously pulling on the door handle. ś Operate the other door locks and handles, front and rear. ś Lower a front window and use the mechanical key to unlock the door from outside. 5-33 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features WARNING WARNING ś The doors should always be fully If you stay in the vehicle for a long time closed and locked while the while the weather is very hot or cold, vehicle is in motion. If the doors there are risks of injuries or danger to are unlocked, the risk of being life. Do not lock the vehicle from the thrown from the vehicle in a crash is outside when someone is in the vehicle. increased. ś Do not pull the inner door handle of WARNING the driver’s or passenger’s door while the vehicle is moving. Opening a door when something is approaching may cause damage or injury. Be careful when opening doors WARNING and watch for vehicles, motorcycles, bicycles or pedestrians approaching the Do not leave the elderly, children or vehicle in the path of the door. animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or serious injury to the elderly, unattended children or animals who cannot escape from the vehicle. Children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle. WARNING Always secure your vehicle. Leaving your vehicle unlocked increases the potential risk to you or others from someone hiding in your vehicle. To secure your vehicle, while depressing the brake, move the shift button to the P (Park) position, engage the parking brake, and place the ignition switch in the LOCK/OFF position, close all windows, lock all doors, and always take the key with you. 5-34 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Automatic Door Lock and Unlock Child-Protector Rear Door Locks Features Impact sensing door unlock system (if equipped) All doors will be automatically unlocked when an impact causes the air bags to deploy. Speed sensing door lock system (if equipped) All doors will be automatically locked OCN7050129 when vehicle speed exceeds 9 mph (15 km/h). The child safety lock is provided to help prevent children seated in the rear from You can activate or deactivate the Auto accidentally opening the rear doors. Door Lock/Unlock features from the User Settings Mode on the LCD display. The rear door safety locks should be used whenever children are in the vehicle. For more details, refer to “LCD Display” in chapter 4. If your vehicle is equipped The child safety lock is located on the with additional navigation, please refer edge of each rear door. When the child to the infotainment system manual safety lock is in the lock position, the separately supplied. rear door will not open if the inner door handle is pulled. To lock the child safety lock, insert a key (or screwdriver) (1) into the hole and turn it to the lock position. To allow a rear door to be opened from inside the vehicle, unlock the child safety lock. WARNING If children accidently open the rear doors while the vehicle is in motion, they could fall out of the vehicle. The rear door safety locks should always be used whenever children are in the vehicle. 5-35 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features 5($5 2&&83 $17 $/(57 ǣ52$Ǥ Rear Occupant Alert helps prevent the WARNING driver from leaving a passenger in the rear seats. Rear Occupant Alert provides information to the driver to check the rear seats but it does not detect Rear Occupant Alert Operation whether there is an object or passenger. Always check the rear seats when leaving the vehicle. Information The open and close history of the rear door is initialized if the driver turns off the engine and lock vehicle doors. However, the alarm may sound again whenever the driver’s door is opened if the previous history of the rear door is not OCN7050135L initialized. When the driver turns off the engine and opens the driver’s door after opening and closing a rear door, a warning message “Check rear seats” appears on the cluster. 5-36 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 7+()7ǘ$/$50 6<67(0 This system helps to protect your vehicle Information and valuables. The horn will sound and the hazard warning lights will blink ś Do not lock the doors until all continuously if any of the following passengers have left the vehicle. If the occur: remaining passenger leaves the vehicle when the system is armed, the alarm - A door is opened without using the will be activated. remote key or smart key. ś If the vehicle is not disarmed with the - The trunk is opened without using the remote key or smart key, open the remote key or smart key. doors by using the mechanical key and - The engine hood is opened. place the ignition switch in the ON The alarm continues for 30 seconds, then position (for remote key) or start the the system resets. To turn off the alarm, engine (for smart key) and wait for 30 unlock the doors with the remote key or seconds. smart key. ś When the system is disarmed but a The Theft Alarm System automatically door or trunk is not opened within 30 sets 30 seconds after you lock the doors seconds, the system will be rearmed. and the trunk. For the system to activate, you must lock the doors and the trunk from outside the vehicle with the remote key or smart key or by pressing the button on the outside of the door handle with the smart key in your possession. The hazard warning lights will blink and the chime will sound once to indicate the system is armed. Once the security system is set, opening any door, the trunk, or the hood without using the remote key or smart key will cause the alarm to activate. The Theft Alarm System will not set if the hood, the trunk, or any door is not fully closed. If the system will not set, check the hood, the trunk, or the doors are fully closed. Do not attempt to alter this system or add other devices to it. 5-37 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features STEERING WHEEL Electric Power Steering (EPS) Information The system assists you with steering the The following symptoms may occur during vehicle. If the vehicle is turned off or normal vehicle operation: if the power steering system becomes ś The steering effort may be high inoperative, you may still steer the immediately after placing the ignition vehicle, but it will require increased switch in the ON position. steering effort. This happens as the system performs Also, the steering effort becomes heavier the EPS system diagnostics. When the as the vehicle’s speed increases and diagnostics are completed, the steering becomes lighter as the vehicle’s speed wheel effort will return to its normal decreases for better control of the condition. steering wheel. ś When the battery voltage is low, you Should you notice any change in the may have to put more steering effort. effort required to steer during normal However, it is a temporary condition so vehicle operation, have the system that it will return to normal condition checked by an authorized HYUNDAI after charging the battery. dealer. ś A click noise may be heard from the EPS relay after the ignition switch is in CAUTION the ON or LOCK/OFF position. ś If the Electric Power Steering System ś Motor noise may be heard when the does not operate normally, the vehicle is at a stop or at a low driving warning light ( ) will illuminate speed. on the instrument cluster. You may ś When you operate the steering wheel steer the vehicle, but it will require in low temperatures, abnormal noise increased steering efforts. Take your may occur. If the temperature rises, the vehicle to an authorized HYUNDAI noise will disappear. This is a normal dealer and have the system checked condition. as soon as possible. ś When an error is detected from the ś When an abnormality is detected EPS, the steering effort assist function in the electric power steering may become inoperative in order to system, to prevent an accident, the prevent fatal accidents. Instrument steering assist function may become cluster warning lights may be on or the inoperative. At this time, the warning steering effort may be high. If these light turns on or blinks on the cluster. symptoms occur, drive the vehicle to The steering wheel may become a safe area as soon as it is safe to do difficult to control or operate. Have so. Have the system checked by an your vehicle checked immediately, authorized HYUNDAI dealer as soon after moving the vehicle to a safe as possible. area. 5-38 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Tilt Steering / Telescope Steering When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After locking the lever, push the steering wheel both up and down to be certain it is locked in position. Always adjust the position of the steering wheel before driving. OCN7050013 To adjust the steering wheel angle and WARNING height: NEVER adjust the steering wheel while 1. Pull down the lock-release lever (1). driving. This may cause loss of vehicle 2. Adjust the steering wheel to the control resulting in an accident. desired angle (2) and distance forward/back (3). 3. Pull up the lock-release lever to lock the steering wheel in place. Information Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lock release lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place. CAUTION While adjusting the steering wheel height, please do not push or pull it hard since the fixture can be damaged. 5-39 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Horn OCN7050016 To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed. NOTICE Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object. 5-40 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 0,55256 Inside Rearview Mirror Day/night rearview mirror (if equipped) Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered. WARNING Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear head restraints which could interfere with your vision through the rear OCN7050017L window. [A] : Lever, [B] : Day, [C] : Night Make this adjustment before you start WARNING driving and while the day/night lever is in the day position. To prevent serious injury during an accident or deployment of the air bag, Pull the day/night lever towards you to do not modify the rearview mirror and reduce glare from the headlights of the do not install a wide mirror. vehicles behind you during night driving. Remember that you lose some rearview clarity in the night position. WARNING NEVER adjust the mirror while driving. This may cause loss of vehicle control resulting in an accident. NOTICE When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid cleaner to enter the mirror housing. 5-41 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Electrochromic mirror (ECM) with Automatic-Dimming Night Vision Safety™ HomeLink® system (if equipped) (NVS®) Mirror (if equipped) The NVS® Mirror automatically helps reduce glare by monitoring light levels in the front and the rear of the vehicle. Any object that obstructs either light sensor will degrade the automatic dimming control feature. For more information regarding NVS® mirrors and other applications, please refer to the Gentex website: OCN7050084N Your mirror will automatically dim Your vehicle may be equipped with upon detecting glare from the vehicles a Gentex Automatic-Dimming Mirror traveling behind you. with an Integrated HomeLink® Wireless The mirror defaults to the ON position Control System. each time the vehicle is started. During nighttime driving, this feature will automatically detect and help reduce Integrated HomeLink® Wireless Control rearview mirror glare. The HomeLink® System Universal Transceiver allows you to activate your garage door(s), electric The HomeLink® Wireless Control System gate, home lighting, etc. can replace up to three hand-held radio-frequency (RF) transmitters with (1) HomeLink Channel 1 a single built-in device. This innovative (2) HomeLink Channel 2 feature will learn the radio frequency (3) HomeLink Channel 3 codes of most current transmitters to (4) Garage Door Opener Status Indicator : operate devices such as gate operators, Closing or Closed garage door openers, entry door locks, security systems, even home lighting. (5) HomeLink Operation Indicator Both standard and rolling code-equipped (6) Garage Door Opener Status Indicator : transmitters can be programed by Opening or Opened following the outlined procedures. (7) HomeLink User Interface Indicator Additional HomeLink® information can youtube.com/HomeLinkGentex or by calling 1-800-355-3515. Retain the original transmitter of the RF device you are programing for use in other vehicles as well as for future HomeLink® programing. It is also suggested that upon the sale of the vehicle, the programed HomeLink® buttons be erased for security purposes. 5-42 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Programing WARNING To program most devices, follow these Before programing HomeLink® to a instructions: garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. Do not use the HomeLink® with any garage door opener that lacks the safety stop and reverse features required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse - does not meet current U.S. OCN7050085N federal safety standards. Using a garage 1. Press and release (1), (2) or (3) button. door opener without these features ś ,I WKH LQGLFDWRU LV WXUQHG 21 LQ increases the risk of serious injury or Orange, go to Step 3) since it is a death. new programing. ś ,I WKH LQGLFDWRU LV FRQWLQXRXVO\ Programing HomeLink® turned ON or flashes in Green rapidly Please note the following: several times, go to Step 2) since it is a programed button. ś :KHQ SURJUDPLQJ D JDUDJH GRRU opener, it is advised to park the 2. Press and hold the button you wish vehicle outside of the garage. to program for approximately 15- 25 seconds until the LED flashes in ś ,W LV UHFRPPHQGHG WKDW D QHZ EDWWHU\ Orange for several times. be placed in the hand-held transmitter of the device being programed to 3. Hold the Garage Door Opener Original HomeLink® for quicker training and Transmitter near the HomeLink Mirror. accurate transmission of the radio- frequency signal. ś 6RPH YHKLFOHV PD\ UHTXLUH WKH Engine Start/Stop button to be in the ACC (or “Accessories”) position for programing and/or operation of HomeLink®. ś ,Q WKH HYHQW WKDW WKHUH DUH VWLOO programing difficulties or questions after following the programing steps listed below, contact HomeLink® at: com/HomeLinkGentex or by calling 1-800-355-3515. 5-43 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features 7. Return to the vehicle and firmly press, hold for two seconds and release the HomeLink button up to three times. Do not press the HomeLink button rapidly. At this point programing is complete and your device should operate when the HomeLink button is pressed and released. Information OCN7050086N ś Some garage door openers require to press the programed button on the 4. Press the Original Transmitter button until the indicator (4) is mirror up to three times right after the programing is just completed to turned continuously ON or flashes in Green for approximately 10 seconds operate the garage door. and it indicates the programing is ś The indicator (4) is turned ON in completed. Orange and flashes for about 60 seconds, during the programing mode 5. However, the indicator (4) flashes in Green continuously, but if the and if a programing is not succeeded within the 60 seconds, the programing garage door opener does not operate, please continue to follow the step mode will be abort. 6 and 7 (“Rolling Code Programing” procedures). HomeLink® should now activate your 6. Firmly press and release the “Learn,” rolling code equipped device. “Smart,” or “Program” button while the indicator (4) flashes in Green. Once the button is pressed, you have approximately 30 seconds to initiate the next step. Information At the garage door opener motor, (security gate motor, etc.) locate the “Learn,” “Smart,” or “Program” button. This can usually be found where the hanging antenna wire is attached to the motor-head unit (see the device’s manual to identify this button). The name and color of the button may vary by manufacturer. A ladder and/or second person may simplify the following steps. 5-44 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Gate operator & Canadian programing During programing, your handheld transmitter may automatically stop transmitting. Continue to press the Integrated HomeLink® Wireless Control System button while you press and re- press (“cycle”) your handheld transmitter every two seconds until the frequency signal has been learned. The indicator light will flash slowly and then rapidly after several seconds upon successful training. OCN7050087N Erasing HomeLink® buttons 1. Press and hold the button (1) and (3) simultaneously. 2. The indicator (4) is turned continuously ON in orange for about 10 seconds. 3. Then the indicator (4) color changes to Green and flashes rapidly. Release the buttons once the green indicator flashes. 4. Now HomeLink button (1), (2) and (4) OCN7050085N memories are all cleared. Operating HomeLink® NVS® is a registered trademark and 1. Press and release one of the Z-Nav™ is a trademark of the Gentex HomeLink buttons (1, 2 or 3) that Corporation, Zeeland, Michigan. programed. HomeLink® is a registered trademark 2. The HomeLink indicator (4) will owned by Johnson Controls, operate as below: Incorporated, Milwaukee, Wisconsin. - Indicates Green and is continuously FCC ID: NZLUAHL5A ON (Fixed Code Garage Door IC: 4112A-UAHL5A Opener) - Flashes in Green rapidly (Rolling Code Garage Door Opener) 5-45 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Two Way Communication Programing Information 1. Complete the HomeLink This device complies with Part 15 of the “Programing” first. FCC Rules. 2. Before the first 10 times HomeLink Operation is subject to the following three button is pressed after the conditions: programing, the following steps 1. This device may not cause harmful MUST occur to program two way interference, and communication. (only for some older 2. This device must accept any garage doors) interference received, including interference that may cause undesired operation. 3. The transceiver has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. OCN7050088N 3. Press and release the programed HomeLink button to activate the garage door. 4. Once the garage door is stopped, press and release the “Learn” or “Smart” button on the Garage door opener within 1 minute from the time of pressing the programed HomeLink button on mirror. 5-46 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 OCN7050089N OCN7050088N 5. If the both indicator (4) and (5) are Operating Two Way Communication flashing rapidly for about 5 seconds, 1. Press and release (1), (2) or (3) button. the two way synchronization is completed. Information Some newer garage door openers provide two-way communication synchronizing when programing the original transmitter. 5-47 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Recalling Garage Door Status Homelink mirror with two way communication provides a way to view the last stored message from the garage door opener. In order to recall the last known status of the last activated device, press the buttons “1 and 2” OR “2 and 3” simultaneously. ś ,I WKH LQGLFDWRU LV 21 FRQWLQXRXVO\ in Green, it indicates that the last activated device was “closed” properly. OCN7050089N ś ,I WKH LQGLFDWRU LV 21 FRQWLQXRXVO\ 2. The indicator (4) and (5) operates as in Green, it indicates that the last below: activated device was “open” properly. - If the indicator (4) flashes in Orange, it indicates that the garage door is “closing”. Information - If the indicator (4) is ON continuously Two way communication range distance in Green, it indicates that the garage between “vehicle” and “garage door door is “closed”. opener” is 100m. - If the indicator (5) flashes in Orange, The range may be reduced or increased it indicates that the garage door is a little due to obstacle conditions around “Opening”. the garage door opener, such as houses or trees. - If the indicator (5) is ON continuously in Green, it indicates that the garage door is “Opened”. - If the indicator (4) or (5) does not turn to Green, it indicates that the last status of garage door was not received properly. The HomeLink mirror tries to receive the last known status of the garage door for a few seconds. 5-48 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Side View Mirrors WARNING Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle control resulting in an accident. NOTICE ś Do not scrape ice off the mirror face; this may damage the surface of the glass. ś If the mirror is jammed with ice, do OCN7050019 not adjust the mirror by force. Use Make sure to adjust the side view mirrors an approved de-icer (not radiator to your desired position before you begin antifreeze) spray, or a sponge or soft driving. cloth with very warm water, or move the vehicle to a warm place and Your vehicle is equipped with both allow the ice to melt. left-hand and right-hand side view mirrors. The mirrors can be adjusted remotely with the remote switch. The side view mirrors can be folded to help prevent damage when going through an automatic car wash or when passing through a narrow street. The right side view mirror is convex. Objects seen in the mirror are closer than they appear. Use the inside rear view mirror or look back directly to determine the actual distance of other vehicles prior to changing lanes. 5-49 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Side View Mirror Adjustment Folding the side view mirrors OCN7N050001N OCN7050022 1. Press either the L (left side) or R (right To fold the side view mirrors, grasp the side) button (1) to select the side view housing of the mirror and then fold it mirror you would like to adjust. inwards. 2. Use the mirror adjustment control (2) to position the selected mirror up, down, left or right. 3. After adjustment, put the button into neutral (center) position to prevent inadvertent adjustment. NOTICE ś The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor. ś Do not attempt to adjust the side view mirrors by hand, because this can damage the motor. 5-50 | |
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст