Hyundai Santa Fe (2006 year). Manual — part 177
WINDSHIELD WIPER/WASHER
BE -169
INSPECTION
E8B9F4EC
1.
Multifunction switch operates head lamps and wiper
by communicating with BCM through LIN communi-
cation.
2.
Check BCM input/output value of each position of
multifunction switch when you inspect the module
whether faulty or not.
3.
Select model and BCM menu.
1. HYUNDAI VEHICLE DIAGNOSIS
MODEL : SANTAFE 06-
01. ENGINE (GASOLINE)
02. ENGINE (DIESEL)
03. AUTOMATIC TRANSAXLE
04. ABS/ESP
05. SRS-AIRBAG
06. ELEC.POWER STEERING
07. FULL AUTO AIR/CON.
08. BODY CONTROL MODULE
SCMBE6385L
1. HYUNDAI VEHICLE DIAGNOSIS
MODEL : SANTAFE 06-
SYSTEM : BODY CONTROL MODULE
01. GENERAL
02. NAS
SCMBE6355L
4.
Select "Current data" and wiper.
SANTAFE 06-
SCMBE6356L
5.
Check input/output value of washer & wiper switch.
DEFROSTER SW
HEAD LAMP WASH SW
DEFROSTER REPLAY
HEAD LAMP WASH RLY
MIST SW
SCMBE6358L
BE -170
BODY ELECTRICAL SYSTEM
FRONT WIPER MOTOR
COMPONENT LOCATION
EDBF6DB7
TORQUE : Nm (kgf·m, lbf.ft)
3
6
28~33 (2.8~3.3, 20~23.8)
5
7~11 (0.7~1.1, 5.0~7.9)
2
4
1. Wiper motor & linkage assembly
2. Wiper arm & blade
3. Wiper motor connector
4. Cap
5. Rivet
6. Nut
1
This illustration shows the LHD type.
RHD type is symmetrical.
SCMBE6340L
WINDSHIELD WIPER/WASHER
BE -171
INSPECTION
EF6CA691
SPEED OPERATION CHECK
1.
Remove the connector from the wiper motor.
2.
Attach the positive (+) lead from the battery to terminal
6 and the negative (-) lead to terminal 5.
3.
Check that the motor operates at low speed.
4.
Connect the positive (+) lead from the battery to ter-
minal 4 and the negative (-) lead to terminal 5.
5.
Check that the motor operates at high speed.
1. -
2. B+
3. Parking
4. High
5. GND
6. Low
1
4
5
2
6
3
SCMBE6343L
AUTOMATIC STOP OPERATION CHECK
1.
Operate the motor at low speed using the stalk con-
trol.
2.
Stop the motor operation anywhere except at the off
position by disconnecting terminal 6.
3.
Connect terminals 3 and 6.
4.
Connect the positive (+) lead from the battery to ter-
minal 2 and the negative (-) lead to terminal 5.
5.
Check that the motor stops running at the off position.
1
4
5
2
6
3
SCMBE6344D
BE -172
BODY ELECTRICAL SYSTEM
REPLACEMENT
EAC38CCF
1.
Remove the windshield wiper arm and blade after re-
moving a nut (A).
TORQUE: 28~32 Nm (2.8~3.2 kgf.m, 20~23.1 lbf.ft)
SCMBE6341D
2.
Remove the weather strip and the cowl top cover (A)
after removing 4 rivets.
ATIE362C
3.
Remove the windshield wiper motor and linkage as-
sembly after removing 2 bolts. Disconnect the wiper
motor connector and windshield deicer connector
from the wiper motor & linkage assembly.
TORQUE: 7-11Nm (0.7-1.1, kgf.m, 5.0-7.9 lbf.ft)
SCMBE6342D
4.
Installation is the reverse of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст