Hyundai Santa Fe (2006 year). Manual — part 213
BR -24
BRAKE SYSTEM
REMOVAL
EBEEEAD2
1.
Remove the lower crash pad.
[LHD]
SCMBR6507D
[RHD]
SCMST6001L
2.
Disconnect the stop lamp switch (A) connector.
A
SCMBR6505L
3.
Remove the snap pin (A) and joint pin (B).
A
B
SCMBR6004D
4.
Remove the brake pedal by loosen the joint bolt and
nut.
Tightening torque Nm (kgf.m, lb-ft):
24.5 ~ 34.3 (2.5 ~ 3.5, 18.1 ~ 25.3)
INSTALLATION
ED9EC71E
1.
Installation is the reverse of removal.
CAUTION
•
Before installing the pin, apply the grease to
the joint pin.
•
Use a new snap pin whenever installing.
2.
Check the brake pedal operation.
BRAKE SYSTEM
BR -25
FRONT DISC BRAKE
COMPONENTS
EAE6F9EB
1. Brake caliper assembly
2. Brake disc
3. Pad retainer
4. Guide rod bolt
5. Brake pad
6. Pad shim
TORQUE : Nm (Kgf m, lb-ft)
1
2
3
5
6
4
21.6 ~ 31.4
(2.2 ~ 3.2, 15.9 ~ 23.1)
SCMBR6507L
BR -26
BRAKE SYSTEM
1. Guide rod bolt
2. Caliper body
3. Piston
4. Piston seal
5. Piston boot
6. Pad shim
7. Brake pad
8. Pad retainer
9. Guide rod
10. Boot
TORQUE : Nm (Kgf m, lb-ft)
1
21.6 ~ 31.4
(2.2 ~ 3.2, 15.9 ~ 23.1)
2
3
4
5
6
7
8
9
10
SCMBR6508L
BRAKE SYSTEM
BR -27
REMOVAL
EBAEE8FD
1.
Remove the front wheel
&
tire.
Tightening torque Nm (kgf.m, lb-ft):
88.3 ~ 107.9 (9.0 ~ 11.0, 65.1 ~ 79.6)
SCMBR6532D
2.
Remove the split pin (A) and castle nut (B).
Tightening torque Nm (kgf.m, lb-ft):
200 ~ 260 (20 ~ 26, 145 ~ 188)
B
A
SCMBR6508D
3.
Loosen the hose eye-bolt (A) and caliper mounting
bolts, then remove the front caliper assembly (B).
Tightening torque Nm (kgf.m, lb-ft):
Brake hose to caliper:
24.5 ~ 29.4 (2.5 ~ 3.0, 18.1 ~ 21.7)
Caliper assembly to knuckle:
78.5 ~ 98.1 (8.0 ~ 10.0, 57.9 ~ 72.3)
A
B
SCMBR6510D
4.
Remove the front brake disc by loosening the screws
(A).
A
SCMBR6511D
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст