Hyundai Santa Fe (2006 year). Manual — part 7
MECHANICAL POWER STEERING SYSTEM
ST -25
12. Remove the sub-frame (A) and stay by loosening the
bolts and nuts.
Tightening torque Nm (kgf.m, lb-ft):
Sub-frame stay mounting bolts
70 ~ 90 (7.0 ~ 9.0, 51 ~ 65)
Sub-frame mounting nuts
70 ~ 90 (7.0 ~ 9.0, 51 ~ 65)
Sub-frame mounting bolts
140 ~ 160 (14.0 ~ 16.0, 101 ~ 116)
A
SCMST6525D
13. Remove the heat protector (A).
Tightening torque Nm (kgf.m, lb-ft):
4 ~ 6 (0.4 ~ 0.6, 2.9 ~ 4.3)
A
SCMST6526D
14. Disconnect the pressure tube (A) and return (B) from
the valve body housing.
Tightening torque Nm (kgf.m, lb-ft):
12 ~ 18 (1.2 ~ 1.8, 9 ~ 13)
A
B
SCMST6527D
15. Remove the tube bracket bolts and nut.
SCMST6528D
ST -26
STEERING SYSTEM
16. Remove the power steering gear box from the sub-
frame by loosening the mounting bolts.
Tightening torque Nm (kgf.m, lb-ft):
60 ~ 80 (6.0 ~ 8.0, 43~58)
SCMST6529D
DISASSEMBLY
EDB5D50E
1.
Remove the tie rod end (B) from the tie rod (A).
B
A
KPBF202A
2.
Remove the dust cover (B) from the ball joint (A).
A
B
EPBF500H
3.
Remove the bellows band (A).
A
KPBF006F
MECHANICAL POWER STEERING SYSTEM
ST -27
4.
Remove the bellows clip (A).
A
EPKE013I
5.
Pull the bellows out toward the tie rod.
NOTE
Check for rust on the rack when the bellows are re-
placed.
6.
Remove the feed tube(A) from the rack housing.
A
APHE006H
7.
While moving the rack slowly, drain the fluid from the
rack housing.
8.
Unstake the tab washer (A) which fixes the tie rod (B)
and rack (C) with a chisel.
B
A
C
EPKE037A
9.
Remove the tie rod (B) from the rack (A).
CAUTION
Remove the tie rod (B) from the rack (A), taking
care not to twist the rack.
B
A
KPBF006J
10. Remove the yoke plug locking nut (A).
A
KPBF006K
ST -28
STEERING SYSTEM
11. Remove the yoke plug (B) with a 14mm socket (A).
A
B
KPBF006L
12. Remove the lock nut (D), yoke plug (C), rack support
spring (B) and rack support yoke (A) from the gear
box.
D
C
B
A
APJF005L
13. When the end of the circlip comes out of the notched-
hole of the housing rack cylinder, turn the rack stopper
(A) clockwise and remove the circlip.
CAUTION
Be careful not to damage the rack.
B
A
UPBG500K
14. When the end of the circlip comes out of the notched
hole (A) of the housing rack cylinder, turn the rack
stopper (B) counterclockwise and remove the circlip.
CAUTION
Be careful not to damage the rack.
A
B
EPKE013R
15. Remove the rack bushing and rack from the rack
housing.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст