Hyundai Santa Fe (2006 year). Manual — part 783
FRONT SUSPENSION SYSTEM
SS -39
INSTALLATION
E2DAFBCB
1.
Install the bushing (B) on the stabilizer bar (A).
A
B
C
SCMSS6007D
NOTE
Bring clamp (C) of stabilizer bar (A) into contact with
bushing (B).
2.
Install the bracket on the bushing (B).
3.
Install the stabilizer bar to the sub frame.
4.
Install the stabilizer bar bracket (A) mounting bolts (B).
Tightening torque Nm (kgf-m, lb-ft) :
Bolt(B) : 49.0~63.7 (5.0~6.5, 36.2~47.0)
B
A
SCMSS6006D
5.
Install the sub frame (A) by supporting it with a jack.
A
SCMSS6511D
6.
Install the sub frame stay mounting bolts(A), nuts(B)
and the sub frame mounting bolts(C).
Tightening torque Nm (kgf-m, lb-ft) :
Bolt(A) : 68.6~88.3 (7.0~9.0, 50.6~65.1)
Nut(B) : 68.6~88.3 (7.0~9.0, 50.6~65.1)
Bolt(C) : 137.3~156.9 (14~16, 101.3~115.7)
A
B
C
SCMSS6004D
A
B
C
SCMSS6005D
SS -40
SUSPENSION SYSTEM
7.
Install the front roll stopper mounting bolts (A).
Tightening torque Nm (kgf-m, lb-ft) :
Bolt(A) : 49.0~63.7 (5.0~6.5, 36.2~47.0)
Bolt(B) : 78.5~98.1 (8.0~10.0, 57.9~72.3)
A
B
SCMSS6509D
8.
Install the rear roll stopper mounting bolts (A).
Tightening torque Nm (kgf-m, lb-ft) :
Bolt(A) : 49.0~63.7 (5.0~6.5, 36.2~47.0)
A
SCMSS6510D
9.
Install the front muffler (A).
Tightening torque Nm (kgf-m, lb-ft) :
39.2~58.8 (4.0~6.0, 28.9~43.4)
A
SCMSS6508D
10. Install the connecting bolt (A) between the steering
universal joint assembly and the pinion shaft.
Tightening torque Nm (kgf-m, lb-ft) :
29.4~44.1 (3.0~4.5, 21.7~32.5)
11. Reconnect the EPS connector (B).
A
B
SCMSS6507D
FRONT SUSPENSION SYSTEM
SS -41
12. Install the under cover (A).
Tightening torque Nm (kgf-m, lb-ft) :
16.7~25.5 (1.7~2.6, 12.3~18.8)
A
SCMSS6506D
13. Install the split pin and front lower arm mounting bolt
(B) to the knuckle (A).
Tightening torque Nm (kgf-m, lb-ft) :
98.1~117.7 (10.0~12.0, 72.3~86.8)
B
A
SCMSS6505D
14. Install the front stabilizer link (A) to the strut assembly.
Tightening torque Nm (kgf-m, lb-ft):
Nut(B) : 98.1~117.7 (10.0~12.0, 72.3~86.8)
A
B
SCMSS6504D
15. Install the wheel and tire (A) to the front hub (B).
Tightening torque Nm (kgf-m, lb-ft):
88.3~107.9 (9~11, 65.1~79.6)
B
C
A
SCMSS6502D
CAUTION
Be careful not to damage the hub bolts (C) when
installing the front wheel and tire (A).
SS -42
SUSPENSION SYSTEM
REAR SUSPENSION
SYSTEM
COMPONENT
E0ADC96A
1. Rear shock absorber assembly
2. Rear upper arm
3. Rear lower arm
4. Rear coil spring
5. Rear stabilizer bar assembly
6. Rear stabilizer link assembly
7. Rear cross member
8. Rear assist arm
9. Trailing arm
10. Differential Carrier (4WD)
11. Drive shaft (4WD)
7
1
3
10
5
9
8
6
11
4
2
SCMSS6504L
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст