Hyundai Santa Fe (2006 year). Manual — part 782
FRONT SUSPENSION SYSTEM
SS -35
FRONT STABILIZER BAR
COMPONENT
EA57CFB0
1. Front stabilizer bar
2. Front stabilizer link
3. Front stabilizer bar bracket
4. Front stabilizer bushing
TORQUE : Nm (kgf.m, lb-ft)
98.1~117.7
(10~12, 72.3~86.8)
98.1~117.7
(10~12, 72.3~86.8)
49.0~63.7
(5.0~6.5, 36.2~47.0)
2
3
4
1
4
3
2
SCMSS6503L
SS -36
SUSPENSION SYSTEM
REMOVAL
EBD7E8CF
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely sup-
ported.
2.
Remove the front wheel and tire (A) from the front hub
(B).
B
C
A
SCMSS6502D
CAUTION
Be careful not to damage to the hub bolts (C) when
removing the front wheel and tire (A).
3.
Remove the front stabilizer link (A) from the strut as-
sembly.
A
SCMSS6503D
4.
Remove the split pin and front lower arm mounting
bolt (B) from the knuckle (A).
B
A
SCMSS6505D
5.
Remove the under cover (A).
A
SCMSS6506D
6.
Remove the connecting bolt (A) between the steering
universal joint assembly and the pinion shaft.
7.
Disconnect the EPS connector (B).
A
B
SCMSS6507D
FRONT SUSPENSION SYSTEM
SS -37
8.
Remove the front muffler (A).
A
SCMSS6508D
9.
Remove the front roll stopper mounting bolts (A).
A
B
SCMSS6509D
10. Remove the rear roll stopper mounting bolts (A).
A
SCMSS6510D
11. Remove the sub frame stay mounting bolts (A), nuts
(B) and the sub frame mounting bolts (C) by support-
ing it with a jack.
A
B
C
SCMSS6004D
A
B
C
SCMSS6005D
12. Remove the sub frame (A).
A
SCMSS6511D
SS -38
SUSPENSION SYSTEM
13. Remove the stabilizer bar bracket (A) mounting bolts
(B) from the sub frame.
B
A
SCMSS6006D
14. Remove the stabilizer bar.
INSPECTION
EEE538DD
1.
Check the bushing for wear and deterioration.
2.
Check the stabilizer bar for bending or breakage.
3.
Check the ball joint dust cover for cracks.
4.
Check all bolts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст