Hyundai Santa Fe (2006 year). Manual — part 215
BR -32
BRAKE SYSTEM
REPLACEMENT
E3FC22C7
REAR BRAKE PADS
1.
Loosen the guide rod bolt (A) and pivot the caliper up
out of the way.
A
SCMBR6517D
2.
Replace shims (A), pad retainers (B), and brake pads
(C).
B
A
SCMBR6518D
3.
Push the piston in the cylinder using a SST (09581-
11000)
09581-11000
SCMBR6519D
4.
Pivot the caliper dwon and tighten the guide rod bolt.
Tightening torque Nm (kgf.m, lb-ft):
21.6 ~ 31.4 (2.2 ~ 3.2, 15.9 ~ 23.1)
BRAKE SYSTEM
BR -33
INSPECTION
EE4792FD
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
3.
Check the thickness of the brake disc and run-out us-
ing a micrometer and a dial gauge on the part dotted
line in the illustration below.
Brake disc thickness
Standard: 11 mm (0.43 in)
Service limit: 9.4 mm (0.37 in)
Deviation: less than 0.01 mm (0.00039 in)
Run-out
Standard: 0.03 mm (0.00118 in) or less
5 mm
SCMBR6510L
INSTALLATION
E6402430
1.
Installation is the reverse of removal.
2.
Use a SST (09581-11000) when installing the brake
caliper assembly.
09581-11000
SCMBR6519D
3.
After installation, bleed the brake system. (Refer to
Brake system bleeding)
BR -34
BRAKE SYSTEM
PARKING BRAKE SYSTEM
PARKING BRAKE
COMPONENTS
EA606AC8
1. Parking brake lever assembly
2. Equalizer assembly
3. Parking brake cable
[Hand type]
1
3
2
SCMBR6512L
PARKING BRAKE SYSTEM
BR -35
1. Parking brake pedal assembly
2. Equalizer assembly
3. Parking brake cable
[Foot type]
1
2
3
SCMBR6513L
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст