Hyundai Tucson (2022 year). Manual in english — page 11
06
The indicator in the instrument cluster
WARNING
displays the shift lever/button position
when the ignition switch is in the ON
• Shifting into P (Park) while the
position.
vehicle is in motion may cause you to
lose control of the vehicle.
• After the vehicle has stopped, always
WARNING
make sure the shift lever is in P
To reduce the risk of serious injury or
(Park), apply the parking brake, and
death:
turn the engine off.
• ALWAYS check the surrounding
• When parking on an incline, shift
areas near your vehicle for people,
the gear to P (Park) and apply the
especially children, before shifting a
parking brake to prevent the vehicle
vehicle into D (Drive) or R (Reverse).
from rolling downhill.
• Before leaving the driver’s seat,
• Do not use the P (Park) position in
always make sure the shift lever
place of the parking brake.
is in the P (Park) position, then set
the parking brake, and place the
R (Reverse)
ignition switch in the LOCK/OFF
Use this position to drive the vehicle
position. Unexpected and sudden
backward.
vehicle movement can occur if these
precautions are not followed.
NOTICE
• When using the paddle shifter
(manual shift mode), do not use
Always come to a complete stop before
engine braking (shifting from a
shifting into or out of R (Reverse); you
high gear to lower gear) rapidly on
may damage the transmission if you
slippery roads. The vehicle may slip
shift into R (Reverse) while the vehicle is
causing an accident.
in motion.
When the vehicle is stopped in R
P (Park)
(Reverse) or D (Drive) position, if you
Always come to a complete stop before
open the driver’s door with the seat
shifting into P (Park).
belt unfastened, the gear is shifted to P
(Park) position automatically.
To shift from P (Park), you must depress
firmly on the brake pedal and make sure
However when the vehicle moves in R
your foot is off the accelerator pedal.
(Reverse) or D (Drive) position, if you
open the driver’s door with the seat belt
If you have done all of the above and
unfastened, the gear may be not shifted
still cannot shift the lever out of P
to P (Park) position automatically for
(Park), see "Shift-Lock Release" in this
protecting the automatic transmission.
chapter. (shift lever type)
The shift lever/button must be in P (Park)
before turning the engine off.
6-15
Driving your vehicle
N (Neutral)
To stay in N (Neutral) when vehicle is
OFF (button type)
The wheels and transmission are not
engaged.
Use N (Neutral) if you need to restart a
stalled engine, or if it is necessary to stop
with the engine ON. Shift into P (Park)
if you need to leave your vehicle for any
reason.
Always depress the brake pedal when
you are shifting from N (Neutral) to
another gear.
ONX4060004
WARNING
Do not shift into gear unless your foot is
firmly on the brake pedal. Shifting into
gear when the engine is running at high
speed can cause the vehicle to move
very rapidly. You could lose control of
the vehicle and hit people or objects.
ONX4E060021
If you want to stay in N (Neutral) after the
engine is OFF (in the ACC state), do the
following.
1. Release the parking brake when the
engine is running or the Engine Start/
Stop button is ON position. If Auto
Hold is activated, please turn off Auto
Hold.
2. Push the N (neutral) button while
depressing the brake pedal.
3. When you take your foot off the brake
pedal, the message ‘Press and hold
OK button to stay in Neutral when
vehicle is Off’ (or 'Hold OK button to
stay in neutral gear position when
vehicle is Off') will appear on the
cluster LCD display.
6-16
06
4. Press and hold the OK button on
D (Drive)
the steering wheel for more than 1
This is the normal driving position. The
second.
transmission will automatically shift
5. When the message ‘Vehicle will stay in
through an 8-gear sequence, providing
(N). Change gear to cancel’ (or ‘N will
the best fuel economy and power.
stay engaged when the vehicle is Off’)
To start the vehicle forward, push the D
will appear on the cluster LCD display,
(Drive) button by depressing the brake
press the Engine Start/Stop button
pedal with the engine ON. (button type)
while depressing the brake pedal.
Then depress the accelerator pedal
However, if you open the driver's
smoothly.
door, the gear will automatically
shift to P (Park) and the Engine Start/
For extra power when passing another
vehicle or driving uphill, depress the
Stop button will change to the OFF
position.
accelerator fully. The transmission will
automatically downshift to the next
lower gear (or gears, as appropriate).
NOTICE
When the vehicle is stopped in D (Drive)
With the gear in N (Neutral) the Engine
position, if you open the driver’s door
Start/Stop button will be in the ACC
with the seat belt unfastened, the gear is
position. Note that the doors cannot be
shifted to P (Park) position automatically.
locked in the ACC position. The battery
(button type)
may discharge if left in the ACC position
However while the vehicle is moving in D
for a long period.
(Drive) position, if you open the driver’s
door with the seat belt unfastened, the
gear may not shift to P (Park) position
automatically to protect the automatic
transmission.
The DRIVE MODE switch, located on the
shift lever console, allows the driver to
switch from NORMAL/COMFORT mode
to SPORT. (if equipped)
For more Details, refer to "Drive Mode
Integrated Control System" later in this
chapter.
6-17
Driving your vehicle
Manual shift mode (lever type)
OCN7060007
ONX4E060040
DS mode (Drive Sporty)
[A] : + (Up), [B] : - (Down)
To shift into Ds mode, move the shift
Whether the vehicle is stationary or in
lever from D (Drive) to the left, without
motion, manual shift mode is selected by
upshifting to the (+) or downshifting
pushing the shift lever from the D (Drive)
to the (-). The engine and transmission
position into the manual gate. To return
control logic is automatically optimized
to D (Drive) range operation, push the
for sporty driving.
shift lever back into the main gate.
In Ds mode, if you move the shift lever
to + (up) or (down), the gear will change
In manual shift mode, moving the shift
to manual shift mode. If the shift lever is
lever backwards and forwards will allow
moved back into D (Drive), it will change
you to select the desired range of gears
to D (Drive). The vehicle will perform
for the current driving conditions.
according to the mode selected from
+ (Up) : Push the lever forward once to
drive mode (NORMAL, SPORT).
shift up one gear.
- (Down) : Pull the lever backwards
once to shift down one gear.
6-18
06
Shift-lock release (lever type)
Information
If the shift lever cannot be moved from
•
Only the eight forward gears can be
the P (Park) position into R (Reverse)
selected. To reverse or park the vehicle,
position with the brake pedal depressed,
move the shift lever to the R (Reverse)
continue depressing the brake, and then
or P (Park) position as required.
do the following:
•
Downshifts are made automatically
when the vehicle slows down. When the
vehicle stops, 1st gear is automatically
selected.
•
When the engine RPM approaches the
red zone the transmission will upshift
automatically.
•
If the driver presses the lever to + (Up)
or - (Down) position, the transmission
may not make the requested gear
change if the next gear is outside of
the allowable engine RPM range.
ONX4E060037
The driver must execute upshifts in
1. Place the ignition switch in the LOCK/
accordance with road conditions,
OFF position.
taking care to keep the engine RPMs
below the red zone.
2. Apply the parking brake.
•
When driving on a slippery road, push
3. Carefully remove the shift lever boots.
the shift lever forward into the + (Up)
4. Move the Shift lever while holding
position. This causes the transmission
the release button (1) with a tool (e.g.
to shift into the 2nd gear which is better
flathead screw-driver).
for smooth driving on a slippery road.
If you need to use the shift-lock release,
Push the shift lever to the - (Down) side
we recommend that the system be
to shift back to the 1st gear.
inspected by an authorized HYUNDAI
dealer immediately.
6-19
Driving your vehicle
Shift-lock system
Parking
For your safety, the automatic
Always come to a complete stop and
transmission has a shift-lock system
continue to depress the brake pedal.
which prevents shifting the transmission
Move the shift lever/button into the P
from P (Park) into R (Reverse) unless the
(Park) position, apply the parking brake,
brake pedal is depressed.
and place the ignition switch in the
LOCK/OFF position. Take the Key with
To shift the transmission from P (Park)
into R (Reverse):
you when exiting the vehicle.
1. Depress and hold the brake pedal.
2. Start the engine or place the ignition
WARNING
switch in the ON position.
When you stay in the vehicle with
3. Depress the brake pedal and push the
the engine running, be careful not to
R (Reverse) button. (button type)
depress the accelerator pedal for a long
period of time. The engine or exhaust
Ignition key interlock system
system may overheat and start a fire.
The ignition key cannot be removed
The exhaust gas and the exhaust system
unless the shift lever is in the P (Park)
are very hot. Keep away from the
position.
exhaust system components.
Do not stop or park over flammable
When the battery is discharged
materials, such as dry grass, paper or
(button type) :
leaves. They may ignite and cause a fire.
You cannot shift gears, when the battery
is discharged.
In emergencies, do the following to shift
the gear to N (Neutral) on a level ground.
1. Connect the battery cables from
another vehicle or from a another battery
to the jump-starting terminals inside the
engine compartment. For more details,
refer to “Jump Starting” in chapter 8.
2. Release the parking brake with the
ignition switch in the ON position.
3. Shift the gear to the N(Neutral)
position refer to the “To stay in N
(Neutral) when the engine is OFF (button
type)” in this chapter.
6-20
06
LCD display message (button
Press and hold the OK button on the
type)
steering wheel to stay in Neutral
ÃÃ
The actual message may differ from
The warning message appears on
the following LCD display message.
the LCD display, when pushing the
N(Neutral) button. If you want to stay
ÃÃ
The application of the following
N(Neutral) after turning off the engine,
message may vary according to the
press and hold the “OK” button on the
vehicle model.
steering wheel more than 1 second.
Shifting conditions not met. Reduce
Vehicle will stay in (N). Change gear
speed, then shift
to cancel
The warning message appears on the
The warning message appears on the
LCD display, when engine RPM is too
LCD display, when pushing the “OK”
high, or when driving speed is too fast to
button on the steering wheel after the
shift the gear.
message (“Press and hold OK button
We recommend you decrease the engine
to stay in Neutral when vehicle is Off”)
speed or slow down before shifting the
appears on the cluster LCD display. The
gear.
gear stays in N(Neutral) position after
turning off the engine.
Press brake pedal to change gear
The warning message appears on the
NEUTRAL engaged
LCD display, when the brake pedal is not
The message appears on the LCD
depressed while shifting the gear.
display, when the N (Neutral) position is
We recommend you to depress the brake
engaged.
pedal and then shift the gear.
Gear already selected
Shift to P after stopping
The message appears on the LCD
The warning message appears on the
display, when pushing the current shift
LCD display, when the gear is shifted to P
button again.
(Park) while the vehicle is moving.
Stop the vehicle before shifting to P
(Park).
PARK engaged
Make sure that the vehicle is completely
stopped before shifting to P (Park).
Push-button gear selector
If the gear selector is shifted to P (Park)
while the vehicle is still moving, a
warning message will appear in the LCD
display.
6-21
Driving your vehicle
Shift button held down / Shift
Paddle shifter (Manual shift
button is stuck
mode)
The warning message appears on the
LCD display, when the shift button is
pressed continuously or the shift button
does not properly operate. Clean the
surroundings of gear shift button.
If this message appears again, we
recommend you to have the vehicle
inspected by an authorized HYUNDAI
dealer.
Shifter system malfunction! Service
immediately
ONX4060005
The warning message appears on the
The paddle shifter is available when
LCD display, when the transmission
the shift lever/button is in the D (Drive)
or the shift button does not properly
position or the manual shift mode.
operate in the P (Park) position.
In this case, we recommend you to
With the shift lever/button in the D
immediately have the vehicle inspected
position
by an authorized HYUNDAI dealer.
The paddle shifter will operate when the
vehicle speed is more than 6mph.
Check shift controls
Pull the [+] or [-] paddle shifter once
The warning message appears on the
to shift up or down one gear and the
LCD display, when there is a malfunction
system changes from automatic mode to
with transmission shift button.
manual shift mode.
In this case, we recommend you to
To change back to automatic shift mode
immediately have the vehicle inspected
from manual shift mode, do one of the
by an authorized HYUNDAI dealer.
followings :
--
Pull the [+] paddle shifter for more
than one second
--
Move the shift lever from D(Drive)
to manual gate and return it to D
position again in the shift lever type.
In the shift button type, press the D
button.
6-22
06
The manual shift mode also changes
Good driving practices
back to automatic shift mode in one of
•
Never move the shift button from
following situations
P (Park) or N (Neutral) to any other
--
When the accelerator pedal is gently
position with the accelerator pedal
depressed for more than 6 seconds
depressed.
while driving
•
Never move the shift lever/button into
--
When the vehicle stops
P (Park) when the vehicle is in motion.
Be sure the vehicle is completely
Information
stopped before you attempt to shift
into R (Reverse) or D (Drive).
If the [+] and [-] paddle shifters are pulled
•
Do not move the shift button to N
at the same time, gear shift may not occur.
(Neutral) when driving. Doing so
may result in an accident because
of a loss of engine braking and the
transmission could be damaged.
•
Driving uphill or downhill, shift to D
(Drive) to drive forward or R (Reverse)
to drive backwards, and check
the gear position indicated on the
cluster before driving. If the vehicle
is moving in the opposite direction
of the selected gear, the engine may
stop and a serious accident may
occur. Never attempt to select a gear
that is opposite to the direction of
the vehicle motion. Stop the vehicle
before changing to the desired gear.
•
Do not drive with your foot resting
on the brake pedal. Even light, but
consistent pedal pressure can result
in the brakes overheating, brake wear
and possibly even brake failure.
•
When driving with shifter paddles,
slow down before shifting to a lower
gear. Otherwise, the lower gear may
not be engaged if the engine RPMs
are outside of the allowable range.
•
Always apply the parking brake when
leaving the vehicle. Do not depend on
placing the transmission in P (Park) to
keep the vehicle from moving.
6-23
Driving your vehicle
• Exercise extreme caution when
driving on a slippery surface. Be
especially careful when braking,
accelerating or shifting gears. On a
slippery surface, an abrupt change
in vehicle speed can cause the drive
wheels to lose traction and may cause
loss of vehicle control resulting in an
accident.
• Optimum vehicle performance and
economy is obtained by smoothly
depressing and releasing the
accelerator.
WARNING
To reduce the risk of SERIOUS INJURY
or DEATH:
•
ALWAYS wear your seatbelt. In a
collision, an unbelted occupant
is significantly more likely to be
seriously injured or killed than a
properly belted occupant.
•
Avoid high speeds when cornering or
turning.
•
Do not make quick steering wheel
movements, such as sharp lane
changes or fast, sharp turns.
•
The risk of rollover is greatly
increased if you lose control of your
vehicle at highway speeds.
•
Loss of control often occurs if two or
more wheels drop off the roadway
and the driver over steers to reenter
the roadway.
•
In the event your vehicle leaves
the roadway, do not steer sharply.
Instead, slow down before pulling
back into the travel lanes.
•
HYUNDAI recommends you follow all
posted speed limits.
6-24
06
BRAKING SYSTEM
Power-assist brakes
• Wet brakes may impair the vehicle's
ability to safely slow down; the
Your vehicle has power-assisted brakes
vehicle may also pull to one side
that adjust automatically through normal
when the brakes are applied.
usage.
Applying the brakes lightly will
If the engine is not running or is turned
indicate whether they have been
off while driving, the power assist for
affected in this way. Always test your
the brakes will not work. You can still
brakes in this fashion after driving
stop your vehicle by applying greater
through deep water. To dry the
force to the brake pedal than typical.
brakes, lightly tap the brake pedal to
The stopping distance, however, will be
heat up the brakes while maintaining
longer than with power brakes.
a safe forward speed until brake
When the engine is not running, the
performance returns to normal.
reserve brake power is partially depleted
Avoid driving at high speeds until the
each time the brake pedal is applied.
brakes function correctly.
Do not pump the brake pedal when the
power assist has been interrupted.
Disc brakes wear indicator
When your brake pads are worn and new
pads are required, you will hear a high
WARNING
pitched warning sound from your front
Take the following precautions:
or rear brakes. You may hear this sound
• Do not drive with your foot resting
come and go or it may occur whenever
on the brake pedal. This will create
you depress the brake pedal.
abnormal high brake temperatures,
Note that some driving conditions or
excessive brake lining and pad wear,
climates may cause a brake squeal
and increased stopping distances.
when you first apply (or lightly apply)
• When descending down a long or
the brakes. This is normal and does not
steep hill, use the paddle shifter
indicate a problem with your brakes.
and manually downshift to a
lower gear in order to control your
NOTICE
speed without using the brake
pedal excessively. Applying the
To avoid costly brake repairs, do not
brakes continuously will cause
continue to drive with worn brake pads.
the brakes to overheat and could
result in a temporary loss of braking
Information
performance.
Always replace brake pads as complete
front or rear axle sets.
6-25
Driving your vehicle
Electronic Parking Brake (EPB)
Emergency braking
Applying the parking brake
If there is a problem with the brake
pedal while driving, emergency braking
Type A
is possible by pulling up and holding
the EPB switch. Braking is possible only
while you are holding the EPB switch.
However, braking distance will be longer
than normal.
WARNING
To reduce the risk of SERIOUS INJURY
or DEATH, do not operate the EPB
while the vehicle is moving except
ONX4E060036
in an emergency situation. It could
Type B
damage the brake system and lead to
an accident.
Information
During emergency braking, the Parking
Brake warning light will illuminate to
indicate that the system is operating.
NOTICE
ONX4060006
If you continuously notice a noise or
To apply EPB (Electronic Parking Brake):
burning smell when the EPB is used for
1. Depress and hold the brake pedal.
emergency braking, we recommend
that you have the system checked by an
2. Pull up the EPB switch.
authorized HYUNDAI dealer.
Make sure the Parking Brake warning
light comes on.
EPB (Electronic Parking Brake) may be
automatically applied when:
• Requested by other systems
• The driver turns the vehicle off while
Auto Hold is operating.
6-26
06
Releasing the parking brake
To release EPB (Electronic Parking Brake)
automatically:
Type A
• Gear in P (Park)
With the engine running depress the
brake pedal and shift out of P (Park) to R
(Reverse) or D (Drive).
• Gear in N (Neutral)
With the engine running depress the
brake pedal and shift out of N (Neutral)
to R (Reverse) or D (Drive).
ONX4E060025
Type B
•
Satisfy the following conditions
1.
Ensure the doors, hood and liftgate
are closed.
2.
With the engine running, depress the
brake pedal and shift out of P (Park) to
R (Reverse), D (Drive) or Manual shift
mode.
3.
Depress the accelerator pedal.
Make sure the Parking Brake warning
light goes off.
ONX4E060026
To release EPB (Electronic Parking
Brake):
Information
1. Press the Engine Start/Stop button to
•
For your safety, you can engage EPB
the ON or START position.
even though the Engine Stop/Start
button is in the OFF position (only if
2. Press the EPB switch while depressing
battery power is available), but you
the brake pedal.
cannot release it.
Make sure the Parking Brake warning
light goes off.
•
For your safety, depress the brake
pedal and release the parking brake
manually with the EPB switch when
you drive downhill or when backing up
the vehicle.
NOTICE
• If the Parking Brake warning light
is still on even though the EPB has
been released, we recommend that
you have the system checked by an
authorized HYUNDAI dealer.
• Do not drive your vehicle with EPB
applied. It may cause excessive brake
pad and brake rotor wear.
6-27
Driving your vehicle
Warning messages
• NEVER allow anyone who is
unfamiliar with the vehicle to touch
the EPB switch. If EPB is released
unintentionally, serious injury may
occur.
• Only release EPB when you are
seated inside the vehicle with your
foot firmly on the brake pedal.
NOTICE
•
Do not apply the accelerator pedal
while the parking brake is engaged.
OTM058132L
If you depress the accelerator pedal
To release EPB, close the doors, hood and
with EPB engaged, a warning will
liftgate and fasten the seatbelt
sound and a message will appear.
• If you try to drive with EPB applied, a
Damage to the parking brake may
warning will sound and a message will
occur.
appear.
•
Driving with the parking brake on
• If the driver's seat belt is unfastened
can overheat the braking system and
and the engine hood or liftgate is
cause premature wear or damage
opened, a warning will sound and a
to brake parts. Make sure EPB is
message will appear.
released and the Parking Brake
warning light is off before driving.
• If there is a problem with the vehicle,
a warning may sound and a message
may appear.
Information
If the situation occurs, depress the brake
•
A clicking sound may be heard while
pedal and release EPB by pressing the
operating or releasing the EPB. These
EPB switch.
conditions are normal and indicate that
EPB is functioning properly.
WARNING
•
When leaving your keys with a parking
attendant or assistant, make sure to
• Whenever leaving the vehicle or
inform him/her how to operate EPB.
parking, always come to a complete
stop and continue to depress the
brake pedal.
Shift the gear into P (Park), pull
up the EPB switch, and press the
Engine Start/Stop button to the OFF
position. Take the Key with you when
leaving the vehicle.
Vehicles not fully engaged in P (Park)
with the parking brake set are at risk
for moving inadvertently and causing
injury to yourself or others.
6-28
06
Type A
EPB malfunction
Electronic Parking Brake (EPB) warning
light illuminates if the Engine Start/Stop
button is pressed to the ON position and
goes off in approximately 3 seconds if
the system is operating normally.
If the EPB warning light remains on,
comes on while driving, or does not
come on when the Engine Start/Stop
button is pressed to the ON position,
this indicates that the EPB may have
OJX1069034L
malfunctioned.
Type B
If this occurs, we recommend that
you have the system checked by an
authorized HYUNDAI dealer.
The EPB warning light may illuminate
when the ESC indicator comes on to
indicate that ESC is not working properly,
but it does not indicate a malfunction of
EPB.
NOTICE
OJX1069065L
• If the EPB warning light is still on,
AUTO HOLD turning Off! Press brake
we recommend that you have the
pedal /Turning off AUTO HOLD. Press
system checked by an authorized
brake pedal
HYUNDAI dealer.
When the conversion from Auto Hold to
• If the Parking Brake warning light
EPB is not working properly a warning
does not illuminate or blinks even
will sound and a message will appear.
though the EPB switch was pulled
up, EPB may not be applied.
• If the Parking Brake warning light
blinks when the EPB warning light is
on, press the switch, and then pull
it up. Repeat this one more time.
If the EPB warning does not go off,
we recommend that you have the
system checked by an authorized
HYUNDAI dealer.
OJX1069028L
OJX1069066L
Parking brake automatically engaged /
Parking brake automatically applied
When EPB is applied while Auto Hold
is activated, a warning will sound and a
message will appear.
6-29
Driving your vehicle
Parking brake warning light
Auto Hold
Check the Parking Brake
Auto Hold maintains the vehicle in a
warning light by pressing the
standstill even though the brake pedal is
Engine Stop/Start button to the
not depressed after the driver brings the
ON position.
vehicle to a complete stop by depressing
This light will be illuminated when the
the brake pedal.
parking brake is applied with the Engine
Stop/Start button in the START or ON
To apply:
position.
Type A
Before driving, be sure the parking
brake is released and the Parking Brake
warning light is OFF.
If the Parking Brake warning light
remains on after the parking brake is
released while the engine is running,
there may be a malfunction in the
brake system. Immediate attention is
necessary.
If at all possible, cease driving the vehicle
ONX4060008
immediately. If that is not possible,
Type B
use extreme caution while operating
the vehicle and only continue to drive
the vehicle until you can reach a safe
location.
Electronic Parking Brake (EPB)
Malfunction
If the Electronic Parking Brake (EPB) does
not release normally, DO NOT DRIVE THE
VEHICLE. Have your vehicle inspected at
an authorized HYUNDAI dealer.
ONX4E060027
It is recommended to have your vehicle
1. With the driver’s door, engine hood
towed on a flatbed tow truck if the EPB
and liftgate (vehicle equipped with
malfunction occurs.
shift button) closed, then press the
AUTO HOLD switch. The white AUTO
HOLD indicator will come on and the
system will be in the standby position.
6-30
06
To cancel:
Type A
ONX4060009
2. When you stop the vehicle completely
ONX4060010
by depressing the brake pedal, Auto
Type B
Hold maintains the brake pressure
to hold the vehicle stationary. The
indicator changes from white to
green.
3. The vehicle will remain stationary
even if you release the brake pedal.
4. If EPB is applied, Auto Hold will be
released.
To release:
ONX4E060028
• If you depress the accelerator pedal
1. Depress and hold the brake pedal.
with the gear in D(Drive) or Manual
shift mode or R(vehicle equipped
2. Press the AUTO HOLD switch.
with shift button), the Auto Hold will
The AUTO HOLD indicator will turn off.
be released automatically and the
vehicle will start to move. The AUTO
HOLD indicator changes from green
WARNING
to white.
To prevent, unexpected and sudden
• If the vehicle is restarted using the
vehicle movement, ALWAYS press your
+/- switch operation while Auto
foot on the brake pedal to cancel the
Hold and Smart Cruise Control or
Auto Hold before you:
Highway Driving Assist is operating,
--
Drive downhill.
Auto Hold will be released regardless
of accelerator pedal operation. The
--
Drive the vehicle in R (Reverse).
AUTO HOLD indicator changes from
(vehicle equipped with shift button)
green to white.
--
Park the vehicle.
WARNING
When Auto Hold is automatically
released by depressing the accelerator
pedal, always take a look around your
vehicle.
Slowly depress the accelerator pedal
for a smooth start.
6-31
Driving your vehicle
Information
WARNING
•
The Auto Hold does not operate when:
• Depress the accelerator pedal slowly
when you start the vehicle.
--
The driver's door is opened
• For your safety, cancel Auto Hold
--
The engine hood is opened
when you drive downhill, back up the
--
The liftgate is opened (vehicle
vehicle or park the vehicle.
equipped with shift button)
--
The gear is in P (Park)
NOTICE
--
EPB is applied
If there is a malfunction with the
•
For your safety, the Auto Hold
driver's door or engine hood open
automatically switches to EPB when:
detection system, Auto Hold may not
--
The driver's door is opened
work properly.
--
The engine hood is opened
We recommend that you contact an
--
The vehicle is in a standstill for more
authorized HYUNDAI dealer.
than 10 minutes
--
The vehicle is standing on a steep
slope
--
The vehicle moved several times
--
The liftgate is opened
In these cases, the Parking Brake
warning light comes on, the AUTO
HOLD indicator changes from green
to white, and a warning sound and a
message will appear to inform you that
EPB has been automatically engaged.
Before driving off again, depress the
brake pedal, check the surrounding
area near your vehicle and release the
parking brake manually with the EPB
switch.
•
While operating Auto Hold, you may
hear mechanical noise. However, it is
normal operating noise.
NOTICE
If the AUTO HOLD indicator changes
to yellow, Auto Hold is not working
properly. We recommend that you
contact an authorized HYUNDAI dealer.
6-32
06
Warning messages
Type A
Type B
OTM060049L
OJX1069028L
OJX1069066L
AUTO HOLD conditions not met.
Close door, hood and liftgate.
Parking brake automatically engaged /
Parking brake automatically applied
When you press the AUTO HOLD switch,
if the driver's door and engine hood are
When EPB is applied while Auto Hold
not closed, a warning will sound and a
is activated, a warning will sound and a
message will appear on the cluster LCD
message will appear.
display.
Press the AUTO HOLD switch after
closing the driver's door and hood.
OJX1069035L
Press brake pedal to deactivate AUTO
HOLD
If you did not apply the brake pedal when
you release Auto Hold by pressing the
AUTO HOLD switch, a warning will sound
and a message will appear.
6-33
Driving your vehicle
Anti-lock Brake System (ABS)
Using ABS
To obtain the maximum benefit from
your ABS in an emergency situation,
WARNING
do not attempt to modulate your brake
Anti-Lock Braking System (ABS) or
pressure and do not try to pump your
Electronic Stability Control (ESC)
brakes. Depress your brake pedal as hard
system will not prevent accidents
as possible.
due to improper or dangerous driving
When you apply your brakes under
maneuvers. Even though vehicle
conditions which may lock the wheels,
control is improved during emergency
you may hear sounds from the brakes,
braking, always maintain a safe
or feel a corresponding sensation in the
distance between you and objects
brake pedal. This is normal and it means
ahead of you. Vehicle speeds should
your ABS is active.
always be reduced during extreme
ABS does not reduce the time or distance
road conditions. The braking distance
it takes to stop the vehicle.
for vehicles equipped with ABS or ESC
may be longer than for those without
Always maintain a safe distance from the
these systems in the following road
vehicle in front of you.
conditions.
ABS will not prevent a skid that results
Drive your vehicle at reduced speeds
from sudden changes in direction, such
during the following conditions:
as trying to take a corner too fast or
making a sudden lane change. Always
• Rough, gravel or snow-covered
drive at a safe speed for the road and
roads.
weather conditions.
• On roads where the road surface is
ABS cannot prevent a loss of stability.
pitted or has different surface height.
Always steer moderately when braking
• Tire chains are installed on your
hard. Severe or sharp steering wheel
vehicle.
movement can still cause your vehicle to
The safety features of ABS or ESC
veer into oncoming traffic or off the road.
equipped vehicle should not be tested
On loose or uneven road surfaces,
by high speed driving or cornering. This
operation of the anti-lock brake system
could endanger the safety of yourself or
may result in a longer stopping distance
others.
than for vehicles equipped with a
conventional brake system.
ABS is an electronic braking system that
The ABS (
) warning light will stay
helps prevent a braking skid. ABS allows
on for several seconds after the Engine
the driver to steer and brake at the same
Start/Stop button is in the ON position.
time.
During that time, ABS will go through
self-diagnosis and the light will go off
if everything is normal. If the light stays
on, you may have a problem with your
ABS. We recommend that you contact an
authorized HYUNDAI dealer as soon as
possible.
6-34
06
Electronic Stability Control (ESC)
WARNING
If the ABS (
) warning light is on and
stays on, you may have a problem with
the ABS. Your power brakes will work
normally. To reduce the risk of serious
injury or death, contact your authorized
HYUNDAI dealer as soon as possible.
NOTICE
When you drive on a road having poor
traction, such as an icy road, and apply
your brakes continuously, ABS will be
ONX4060011
active continuously and the ABS (
)
Electronic Stability Control helps to
warning light may illuminate. Pull your
stabilize the vehicle during cornering
vehicle over to a safe place and turn the
maneuvers.
vehicle off.
ESC checks where you are steering and
Restart the vehicle. If the ABS warning
where the vehicle is actually going. ESC
light is off, then your ABS system is
applies braking pressure to any one of
normal.
the vehicle's brakes and intervenes in the
Otherwise, you may have a problem
engine management system to assist the
with your ABS system. We recommend
driver with keeping the vehicle on the
that you contact an authorized
intended path. It is not a substitute for
HYUNDAI dealer as soon as possible.
safe driving practices. Always adjust your
speed and driving to the road conditions.
Information
WARNING
When you jump start your vehicle because
of a drained battery, the ABS (
)
Never drive too fast for the road
warning light may turn on at the same
conditions when cornering. ESC will not
time. This happens because of the low
prevent accidents.
battery voltage. It does not mean your
Excessive speed in turns, abrupt
ABS is malfunctioning. Have the battery
maneuvers, and hydroplaning on wet
recharged before driving the vehicle.
surfaces can result in severe accidents.
6-35
Driving your vehicle
ESC operation
ESC OFF condition
ESC ON condition
To cancel ESC operation:
When the Engine Start/Stop button is
in the ON position, ESC and the ESC
OFF indicator lights illuminate for
• State 1
approximately three seconds. After both
Press the ESC OFF button briefly. The
lights go off, ESC is enabled.
ESC OFF indicator light and/or message
'Traction Control disabled' will illuminate.
When operating
In this state, the traction control function
When ESC is in operation, the
of ESC (engine management) is disabled,
ESC indicator light blinks:
but the brake control function of ESC
(braking management) still operates.
•
When you apply your brakes under
• State 2
conditions which may lock the wheels,
you may hear sounds from the brakes,
Press and hold the ESC OFF button
or feel a corresponding sensation in
continuously for more than 3 seconds.
the brake pedal. This is normal and it
The ESC OFF indicator light and/or
means your ESC is active.
message 'Traction & Stability Control
disabled' illuminates and a warning
•
When ESC activates, the engine may
chime sounds. In this state, both the
not respond to the accelerator as it
traction control function of ESC (engine
does under routine conditions.
management) and the brake control
•
If Cruise Control was in use when
function of ESC (braking management)
ESC activates, Cruise Control
are disabled.
automatically disengages. Cruise
If the Engine Start/Stop button is pressed
Control can be reengaged when the
to the OFF position when ESC is off, ESC
road conditions allow. See “Cruise
remains off. Upon restarting the vehicle,
Control (CC)” section in chapter 7 (if
ESC will automatically turn on again.
equipped).
•
When moving out of the mud or
driving on a slippery road, the engine
RPM (revolutions per minute) may
not increase even if you press the
accelerator pedal deeply. This is to
maintain the stability and traction of
the vehicle and does not indicate a
problem.
6-36
06
Indicator lights
NOTICE
■ ESC indicator light (blinks)
Driving with wheels and tires with
different sizes may cause the ESC
system to malfunction. Before replacing
tires, make sure all four tires and wheels
are the same size. Never drive the
vehicle with different sized wheels and
■ ESC OFF indicator light (comes on)
tires installed.
ESC OFF usage
When Driving
The ESC OFF mode should only be used
briefly to help free the vehicle if stuck in
When the Engine Start/Stop button is
snow or mud, by temporarily stopping
pressed to the ON position, the ESC
operation of ESC, to maintain wheel
indicator light illuminates, then goes off
torque.
if the ESC system is operating normally.
To turn ESC off while driving, press the
The ESC indicator light blinks whenever
ESC OFF button while driving on a flat
ESC is operating.
road surface.
If the ESC indicator light stays on, your
vehicle may have a malfunction with
NOTICE
the ESC system. When this warning light
To prevent damage to the transmission:
illuminates we recommend that the
• Do not allow wheel(s) of one axle to
vehicle be checked by an authorized
HYUNDAI dealer as soon as possible.
spin excessively while the ESC, ABS,
and Parking Brake warning lights
The ESC OFF indicator light comes on
are displayed. The repairs would not
when ESC is turned off.
be covered by the vehicle warranty.
Reduce engine power and do not
spin the wheel(s) excessively while
WARNING
these lights are displayed.
When ESC is blinking, this indicates ESC
• When operating the vehicle
is active:
on a dynamometer, make sure
Drive slowly and NEVER attempt to
ESC is turned off (ESC OFF light
accelerate. NEVER turn ESC off while
illuminated).
the ESC indicator light is blinking or you
may lose control of the vehicle resulting
in an accident.
Information
Turning ESC off does not affect ABS or
standard brake system operation.
6-37
Driving your vehicle
Vehicle Stability Management
VSM operation
(VSM)
When operating
Vehicle Stability Management is a
When you apply your brakes under
function of the Electronic Stability
conditions which may activate ESC, you
Control (ESC) system. It helps the vehicle
may hear sounds from the brakes, or feel
stay stable when accelerating or braking
a corresponding sensation in the brake
suddenly on wet, slippery and rough
pedal. This is normal and it means your
roads where traction over the four tires
VSM is active.
can suddenly become uneven.
Information
WARNING
VSM does not operate when:
Take the following precautions when
• Driving on a banked road such as
using Vehicle Stability Management:
gradient or incline.
• ALWAYS check the speed and the
• Driving in reverse.
distance to the vehicle ahead. VSM
• The ESC OFF indicator light is on.
is not a substitute for safe driving
practices.
• The EPS (Electric power steering)
warning light (
) is on or blinks.
• Never drive too fast for the road
conditions. VSM will not prevent
accidents. Excessive speed in bad
weather, on slippery and uneven
roads can result in severe accidents.
6-38
06
VSM OFF condition
Trailer stability assist (TSA)
To cancel VSM operation, press the ESC
Trailer stability assist is operated as a
OFF button. ESC OFF (
) indicator light
vehicle stability control system. The
will illuminate.
Trailer stability assist system stabilizes
To turn on VSM, press the ESC OFF
the vehicle and trailer when the trailer
button again. The ESC OFF indicator light
sways or oscillates. There are various
will go out.
reasons making vehicle sway and
oscillate. In most case it happens at high
speed however, if the trailer is affected
WARNING
by crosswinds, buffeting, and improper
If the ESC (
) indicator light or EPS
overloading, it may also be a risk of sway.
(
) warning light stays illuminated
or blinks, your vehicle may have a
Factors of swaying such as:
malfunction with the VSM system.
--
High speed
When the warning light illuminates
--
Strong crosswinds
we recommend that the vehicle be
checked by an authorized HYUNDAI
--
Improper overloading
dealer as soon as possible.
--
Sudden controlling of steering wheel
--
Uneven road
NOTICE
Driving with wheels and tires with
Trailer stability assist system
different sizes may cause the VSM
continuously analyzes the vehicle
and trailer instability. When the
system to malfunction. Before replacing
tires, make sure all four tires and wheels
Trailer stability assist system detects
some sway, the brakes are applied
are the same size. Never drive the
vehicle with different sized tires and
automatically to stabilize the vehicle
on the front wheel. However, if it is
wheels installed.
not enough to stabilize, the brakes are
applied on all wheels automatically and
engine power is properly reduced. When
the vehicle is stable from swaying, trailer
stability assist system does not operate.
6-39
Driving your vehicle
Hill-Start Assist Control (HAC)
Downhill Brake Control (DBC)
Hill-Start Assist Control helps prevent
Type A
the vehicle from rolling backwards
when starting a vehicle from a stop
on a hill. The system operates the
brakes automatically for approximately
2 seconds and releases when the
accelerator pedal is depressed.
WARNING
Always be ready to depress the
accelerator pedal when starting off
ONX4060012
an incline. Hill-Start Assist Control
Type B
activates only for approximately 2
seconds.
Information
• Hill-Start Assist Control does not
operate when the gear is shifted to P
(Park) or N (Neutral).
• Hill-Start Assist Control activates even
when the ESC (Electronic Stability
Control) is off. However, it does not
ONX4E060029
activate, when ESC does not operate
Downhill Brake Control assists the driver
normally.
to descend down a steep hill without
having to depress the brake pedal.
The system automatically applies the
brakes to maintain vehicle speed below
a certain speed and allows the driver
to concentrate on steering the vehicle
down hill.
The system is turned off whenever the
engine is turned off.
Press the button to turn on the system
and press the button again to turn it off.
6-40
06
System operation
Mode
Indicator
Description
Press the Downhill Brake Control button when vehicle
speed is under 37 mph (60 km/h). Downhill Brake
Standby
Control will turn on and enter the standby mode. The
system does not turn on if vehicle speed is over 37 mph
(60 km/h).
Green light on
In the standby mode, Downhill Brake Control will
activate under the following conditions:
• The hill is steep enough.
• The brake pedal or accelerator pedal is not depressed.
Activated
• Vehicle speed is within 2~25 mph (4~40 km/h) range.
Within the activation speed range 2~25 mph (4~40
Green light blink
km/h), the driver can control the vehicle speed by
depressing the brake pedal or accelerator pedal.
Downhill Brake Control will turn off under the following
conditions:
• The Downhill Brake Control button is pressed again.
• Vehicle speed is over 37 mph (60 km/h).
Green light off
Deactivated
Downhill Brake Control will be deactivated but maintain
the standby mode under the following conditions:
• The hill is not steep enough.
• Vehicle speed is between 25~37 mph (40~60 km/h).
Green light on
The yellow warning light illuminates when the system
may have malfunctioned or may not work properly
System
during activation. If this occurs, Downhill Brake Control
malfunction
is deactivated. We recommend that the system be
inspected by an authorized HYUNDAI dealer as soon as
Yellow light on
possible.
6-41
Driving your vehicle
Information
•
Downhill Brake Control may not
deactivate on steep inclines even though
the brake pedal or accelerator pedal is
depressed.
•
Downhill Brake Control may not
always maintain vehicle speed at a
certain speed.
•
Downhill Brake Control does not
operate when:
OJX1069039L
--
The gear is in P (Park).
Downhill Brake Control disabled. Control
--
ESC is activated.
vehicle speed (manually)
•
Noise or vibration may occur from the
When Downhill Brake Control is not
brakes when Downhill Brake Control is
working properly this warning message
activated.
will appear on the cluster LCD display
and you will hear a warning sound. If
•
The rear stop light comes on when
this occurs, control vehicle speed by
Downhill Brake Control is activated.
depressing the brake pedal.
WARNING
Always turn off Downhill Brake Control
on normal roads. The system might
activate inadvertently from the standby
mode when driving through speed
bumps or making sharp curves.
6-42
06
Good braking practices
Wet brakes can be dangerous! The
brakes may get wet if the vehicle is
driven through standing water or if it
WARNING
is washed. Your vehicle will not stop as
quickly if the brakes are wet. Wet brakes
Whenever leaving the vehicle or
may cause the vehicle to pull to one side.
parking, always come to a complete
stop and continue to depress the brake
To dry the brakes, apply the brakes
pedal. Shift the gear to the P (Park)
lightly until the braking action returns to
position, then apply the parking brake,
normal. If the braking action does not
and press the Engine Start/Stop button
return to normal, stop as soon as it is safe
to the OFF position.
to do so and we recommend that you
call an authorized HYUNDAI dealer for
Vehicles parked with the parking brake
assistance.
not applied or not fully engaged may
roll inadvertently and may cause injury
DO NOT drive with your foot resting on
to the driver and others. ALWAYS apply
the brake pedal. Even light, but constant
the parking brake before exiting the
pedal pressure can result in the brakes
vehicle.
overheating, brake wear, and possibly
even brake failure.
If a tire goes flat while you are driving,
apply the brakes gently and keep the
vehicle pointed straight ahead while you
slow down. When you are moving slowly
enough for it to be safe to do so, pull off
the road and stop in a safe location.
Keep your foot firmly on the brake pedal
when the vehicle is stopped to prevent
the vehicle from rolling forward.
6-43
Driving your vehicle
IDLE STOP AND GO (ISG) SYSTEM
Idle Stop and Go helps reduce fuel
ISG system operation
consumption by automatically shutting
Prerequisite for activation
down the engine, when the vehicle is
ISG system operates in the following
at a standstill (i.e. red stop light, stop
situations.
sign, and traffic jam) subject to certain
prerequisite conditions being satisfied as
• The driver's seatbelt is fastened
listed below.
• The driver's door and hood are closed
The engine is automatically started upon
• The brake vacuum pressure is
satisfying the starting conditions.
adequate
ISG system is always active, when the
• The battery sensor is activated and
engine is running.
the battery is sufficiently charged
• Outside temperature is not too low or
Information
too high
When the engine is automatically started
• The vehicle is driven over a constant
speed and stops
by ISG system, warning lights (i.e. ABS,
ESC, ESC OFF, EPS, and parking brake
• The climate control system satisfies
warning light) may illuminate for a few
the conditions
seconds due to low battery voltage.
• The vehicle is sufficiently warmed up
However, it does not indicate a
• ISG related parts are working properly
malfunction with ISG system.
• The incline is gradual
• The steering wheel is turned less than
180 degrees and then the vehicle
stops
Information
If the ISG light (white) is turned on on the
instrument cluster and does not meet the
ISG system operating conditions, the ISG
system is not activated.
When the ISG light (yellow) is on while the
ISG system meets operating conditions, we
recommend that the system be inspected
by an authorized HYUNDAI dealer.
6-44
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст