Hyundai Tucson (2022 year). Manual in english — page 9
Convenient features
Floor/Defrost-Level
(A, B, D, E, F)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
Front defroster (A, B)
ONX4050101
Most of the air flow is directed to the
windshield with a small amount of air
Face-Level (B, C, E)
directed to the side window defrosters.
Air flow is directed toward the upper
MAX A/C-Level (B, C, E)
body and face. Additionally, each outlet
can be controlled to direct the air
discharged from the outlet.
Bi-Level (B, C, D, E, F)
Air flow is directed towards the face and
the floor.
ONX4E050153
Floor-Level (A, B, D, E, F)
The MAX A/C mode is used to cool the
inside of the vehicle faster. Air flow is
Most of the air flow is directed to the
directed toward the upper body and
floor, with a small amount of the air
face.
being directed to the windshield and side
window defrosters.
In this mode, the air conditioning and the
recirculated air position is selected. Turn
the fan speed mode to adjust.
5-96
05
Front
Temperature control
ONX4050104
Rear
ONX4E050106
The temperature will increase by turning
the knob to the right. The temperature
will decrease by turning the knob to the
left.
Air intake control
This is used to select outside (fresh) air
position or recirculated air position. To
change the air intake control position,
press the control button.
ONX4050105
Instrument panel vents
Recirculated air position
The instrument panel vent air flow can
With the recirculated air
be directed up/down or left/right using
position selected, air from the
the vent adjustment lever. The air flow
passenger compartment will
can also be CLOSED using the vent
be drawn through the heating
adjustment lever.
system and heated or cooled
according to the function
selected.
Outside (fresh) air position
With the outside (fresh) air
position selected, air enters
the vehicle from outside
and is heated or cooled
according to the function
selected.
5-97
Convenient features
Fan speed control
Information
Using the system in the fresh air position is
recommended.
Prolonged operation of the heater in the
recirculated air position (without air
conditioning selected) can cause fogging of
the windshield and side windows and the
air within the passenger compartment will
become stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in excessively
ONX4050107N
dry air in the passenger compartment.
Turn the knob to the right to increase
the fan speed and airflow. Turn the knob
to the left to decrease fan speed and
WARNING
airflow.
• Continued climate control system
Setting the fan speed control knob to the
operation in the recirculated air
“0” position turns off the fan.
position may allow humidity to
increase inside the vehicle which
may fog the glass and obscure
NOTICE
visibility.
Operating the fan speed when the
• Do not sleep in a vehicle with the air
ignition switch is in the ON position
conditioning or heating system on. It
could cause the battery to discharge.
may cause serious harm or death due
Operate the fan speed when the engine
to a drop in the oxygen level and/or
is running.
body temperature.
Air conditioning (A/C) (if equipped)
• Continued climate control system
operation in the recirculated air
position can cause drowsiness
or sleepiness, and loss of vehicle
control. Set the air intake control
to the outside (fresh) air position as
much as possible while driving.
ONX4050108
Press the A/C button to turn the air
conditioning system on (indicator light
will illuminate). Press the button again to
turn the air conditioning system off.
5-98
05
System operation
Air conditioning
Ventilation
HYUNDAI Air Conditioning Systems are
filled with R-1234yf refrigerant.
1. Set the mode to the
position.
1. Start the engine. Push the air
2. Set the air intake control to the
conditioning button.
outside (fresh) air position.
2. Set the mode to the position.
3. Set the temperature control to the
desired position.
3. Set the air intake control to the
outside air or recirculated air position.
4. Set the fan speed control to the
desired speed.
4. Adjust the fan speed control and
temperature control to maintain
Heating
maximum comfort.
1. Set the mode to the
position.
2. Set the air intake control to the
Information
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If desired, turn the air conditioning ON
with the temperature control knob set
to heat in order to dehumidify the air
before it enters into the cabin.
If the windshield fogs up, set the mode
to the
or
position.
ONX4050071
Your HYUNDAI vehicle is filled with
Operation Tips
R-1234-yf refrigerant. Information
• To help keep dust or unpleasant fumes
regarding the refrigerant designation
from entering the vehicle through the
for your vehicle can be found on the
ventilation system, temporarily set the
information label located under the hood.
air intake control to the recirculated
Refer to chapter 8 for the location of the
air position. Be sure to return the
air conditioning refrigerant label.
control to the fresh air position when
the irritation has passed to keep fresh
air in the vehicle. This will help keep
the driver alert and comfortable.
• To prevent interior fog on the
windshield, set the air intake control
to the fresh air position and fan speed
to the desired position, turn on the air
conditioning system, and adjust the
temperature control to the desired
temperature.
5-99
Convenient features
NOTICE
Air conditioning system operation tips
• The refrigerant system should only
•
If the vehicle has been parked in
be serviced by trained and certified
direct sunlight during hot weather,
technicians to insure proper and safe
open the windows for a short time
operation.
to let the hot air inside the vehicle
escape.
• The refrigerant system should be
serviced in a well-ventilated place.
•
After sufficient cooling has been
achieved, switch back from the
• The air conditioning evaporator
recirculated air to the fresh outside air
(cooling coil) shall never be repaired
position.
or replaced with one removed from
a used or salvaged vehicle and new
•
To help reduce moisture inside of
replacement MAC evaporators shall
the windows on rainy or humid
be certified (and labeled) as meeting
days, decrease the humidity inside
SAE Standard J2842.
the vehicle by operating the air
conditioning system with the windows
and sunroof closed.
NOTICE
•
Use the air conditioning system every
• When using the air conditioning
month for a few minutes to ensure
system, monitor the temperature
maximum system performance.
gauge closely while driving up
•
If you operate the air conditioner
hills or in heavy traffic when
excessively, the difference between
outside temperatures are high.
the temperature of the outside air and
Air conditioning system operation
that of the windshield could cause
may cause engine overheating.
the outer surface of the windshield to
Continue to use the fan but turn the
fog up, causing loss of visibility. In this
air conditioning system off if the
case, set the mode selection knob to
temperature gauge indicates engine
the
position and set the fan speed
overheating.
control knob to the lowest speed
• When opening the windows in humid
setting.
weather air conditioning may create
water droplets inside the vehicle.
Since excessive water droplets
may cause damage to electrical
equipment, air conditioning should
only be used with the windows
closed.
5-100
05
System maintenance
Air Conditioning Performance and
Cabin air filter
Maintenance at Your HYUNDAI
Dealer
When the amount of refrigerant is low,
the performance of the air conditioning
is reduced. Overfilling also reduces the
performance of the air conditioning system.
Therefore, if abnormal operation is found, we
recommend that the system be inspected by
an authorized HYUNDAI dealer.
NOTICE
It is important that the correct type and
OIK047401L
[A] : Outside air, [B] : Recirculated air
amount of oil and refrigerant is used.
Otherwise, damage to the compressor
[C] : Cabin air filter, [D] : Blower
[E] : Evaporator core, [F] : Heater core
and abnormal system operation may
occur. To prevent damage, the air
The cabin air filter is installed behind
conditioning system in your vehicle
the glove box. It filters the dust or other
should only be serviced by trained and
pollutants that enter the vehicle through
certified technicians.
the heating and air conditioning system.
We recommend that the cabin air filter
be replaced by an authorized HYUNDAI
WARNING
dealer according to the maintenance
Vehicles equipped with R-1234yf
schedule.
Since the refrigerant is
If the vehicle is being driven in severe
mildly flammable and
conditions such as dusty or rough roads,
operated at high pressure,
more frequent climate control filter
the air conditioning system
inspections and changes are required.
should only be serviced
If the air flow rate suddenly decreases,
by trained and certified
we recommend the system be checked
technicians. It is important
at an authorized HYUNDAI dealer.
that the correct type and
amount of oil and refrigerant
are used.
All refrigerants should be reclaimed
with proper equipment.
Venting refrigerants directly to the
atmosphere is harmful to individuals
and environment. Failure to heed these
warnings can lead to serious injuries.
5-101
Convenient features
ONX4050071
Air Conditioning refrigerant label
You can find out which air conditioning
refrigerant is applied to your vehicle on
the label located inside of the hood.
Example
OHYK059001
Each symbol and specification on the
air conditioning refrigerant label is
represented as below:
1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of compressor lubricant
4. Caution
5. Flammable refrigerant
6. To require registered technician to
service air conditioning system
5-102
05
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)
Type A
Type B
The actual shape of air conditioner may differ from the illustration.
ONX4050110N/ONX4050140L
1. Driver’s temperature control button/
7. A/C (air conditioning) button
knob
8. Fan speed control button
2. Passenger’s temperature control
9. Mode selection button
button/knob
10.Multi Air Mode button
3. AUTO (automatic control) button
11. Rear window defroster button
4. Air intake control button
12. SYNC button
5. OFF button
13. Climate control information screen
6. Front windshield defroster button
5-103
Convenient features
Automatic heating and air
2. Turn the temperature control button/
knob to set the desired temperature.
conditioning
If the temperature is set to the lowest
The Automatic Climate Control System
setting (Lo), the air conditioning
is controlled by setting the desired
system will operate continuously.
temperature.
After the interior has cooled
1. Press the AUTO button.
sufficiently, adjust the button/knob
The modes, fan speeds, air intake and
to a higher temperature set point
whenever possible.
air-conditioning will be controlled
automatically by the temperature
setting you select.
To turn the automatic operation off,
select any button of the following:
--
Mode selection button
--
Front windshield defroster button
(Press the button one more time
to deselect the front windshield
defroster function. The ‘AUTO’ sign
will illuminate on the information
display once again.)
--
Fan speed control button
The selected function will be
controlled manually while other
ONX4E050162
functions operate automatically.
You can control the fan speed in three
For your convenience and to improve
stages by pushing the AUTO button
the effectiveness of the climate control,
during automatic operation.
use the AUTO button and set the
temperature to 72°F (22°C).
--
HIGH : Provide rapid air conditioning
and heating with maximum fan speed
setting
--
MEDIUM : Provide air conditioning
and heating with mid-level fan speed
setting
--
LOW : Fan speed is set to the lowest
setting range (1 to 3 bars range)
5-104
05
Manual heating and air
conditioning
1. Start the engine.
2. Set the mode to the desired position.
For improving the effectiveness of
heating and cooling, select:
--
Heating:
--
Cooling:
3. Set the temperature control to the
desired position.
ONX4050072
4. Set the air intake control to the
outside (fresh) air position.
Information
5. Set the fan speed control to the
Never place anything near the sensor to
desired speed.
ensure better control of the heating and
6. If air conditioning is desired, turn the
cooling system.
air conditioning system on.
7. Press the AUTO button to convert to
full automatic control of the system.
5-105
Convenient features
Mode selection (12)
The actual shape of air conditioner may differ from the illustration.
ONX4050118
The mode selection button controls the direction of the air flow through the ventilation
system.
5-106
05
Floor-Level (A, B, D, E, F)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and side
window defrosters.
Floor/Defrost-Level
(A, B, D, E, F)
Most of the air flow is directed to the
ONX4050117
floor and the windshield with a small
The air flow outlet direction is cycled as
amount directed to the side window
follows:
defrosters.
Defrost-Level (A, B)
Most of the air flow is directed to the
Face-Level (B, C, E)
windshield with a small amount of air
directed to the side window defrosters.
Air flow is directed toward the upper
body and face. Additionally, each outlet
can be controlled to direct the air
Multi air mode (B, C, D, E, F, G)
discharged from the outlet.
Gentle breezes come out the outlet
vents.
Bi-Level (B, C, D, E, F)
Air flow is directed towards the face and
the floor.
5-107
Convenient features
Front
Temperature control
Type A
ONX4050104
Rear
ONX4050114
Type B
ONX4050105
Instrument panel vents
ONX4050115
The instrument panel vent air flow can
The temperature setting will increase
be directed up/down or left/right using
when you toggle up or touch the UP
the vent adjustment lever. The air flow
arrow on the touchscreen (if equipped).
can also be CLOSED using the vent
The temperature setting will decrease
adjustment lever.
when you toggle down or touch the
DOWN arrow on the touchscreen (if
equipped).
5-108
05
Air intake control
The air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).
Recirculated air position
With the recirculated air
position selected, air from the
passenger compartment will
be drawn through the heating
ONX4050122
system and heated or cooled
according to the function
Adjusting the temperature equally
selected.
Press the SYNC button (indicator light
ON) to adjust the driver and passenger
Outside (fresh) air position
side and the rear seat’s temperature
equally.
With the outside (fresh) air
position selected, air enters
Adjusting the temperature and
the vehicle from outside
and is heated or cooled
individually
according to the function
Press the SYNC button (indicator light
selected.
OFF) again to adjust the driver and
passenger side and the rear seat’s
temperature individually.
Temperature conversion
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.
To change the temperature unit from °C
to °F or °F to °C :
--
Instrument cluster or infotainment
system screen
Go to Setup->Unit ->Temperature unit
The temperature unit on both the cluster
LCD display and the climate control
screen will change.
5-109
Convenient features
Fan speed control
Information
Using the system in the fresh air position is
recommended.
Prolonged operation of the heater in the
recirculated air position (without air
conditioning selected) can cause fogging of
the windshield and side windows and the
air within the passenger compartment will
become stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in excessively
ONX4050124
dry air in the passenger compartment.
The fan speed can be set as desired by
pushing the fan speed control button.
WARNING
Increased air flow is delivered with
higher fan speeds.
•
Continued climate control system
operation in the recirculated air
Pressing the OFF button turns off the fan.
position may allow humidity to
increase inside the vehicle which
NOTICE
may fog the glass and obscure
visibility.
Operating the fan when the ignition
switch is in the ON position could cause
•
Do not sleep in a vehicle with the air
the battery to discharge. Operate the
conditioning or heating system on. It
fan when the engine is running.
may cause serious harm or death due
to a drop in the oxygen level and/or
Air conditioning
body temperature.
Push the A/C button to turn
•
Continued climate control system
the air conditioning system
operation in the recirculated air
on (indicator light will
position can cause drowsiness
illuminate).
or sleepiness, and loss of vehicle
control. Set the air intake control
Push the button again to turn
to the outside (fresh) air position as
the air conditioning system
much as possible while driving.
off.
OFF mode
Push the OFF button to turn
the climate control system
off. However, you can still
operate the mode and air
intake buttons as long as the
ignition switch is in the ON
position.
5-110
05
Multi Air Mode (if equipped)
The actual shape of air conditioner may differ from the illustration.
ONX4050129
5-111
Convenient features
System operation
Ventilation
1. Set the mode to the
position.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
ONX4050128
Heating
When the Multi-Air mode button is
1. Set the mode to the
position.
pressed, air flow is directed to the
face level and floor level and through
2. Set the air intake control to the
perforated sections along the instrument
outside (fresh) air position.
panel for the driver and passenger. The
3. Set the temperature control to the
multi-air mode LED indicator will be
desired position.
illuminated. If the multi air mode button
4. Set the fan speed control to the
is pressed when the air volume is beyond
desired speed.
level 4, it decreases to Level 3.
5. If desired, turn the air conditioning ON
with the temperature control knob set
OFF
to heat in order to dehumidify the air
If you press the multi-air button again,
before it enters into the cabin.
the indicator will turn OFF and the
If the windshield fogs up, set the mode
directed air flow will be according to the
to the
or
position.
previous setting before multi-air mode
was enabled.
Operation Tips
If you press the MODE selection button,
the airflow will change based on the
• To help keep dust or unpleasant fumes
MODE selected.
from entering the vehicle through the
ventilation system, temporarily set the
air intake control to the recirculated
air position. Be sure to return the
control to the fresh air position when
the irritation has passed to keep fresh
air in the vehicle. This will help keep
the driver alert and comfortable.
• To prevent interior fog on the
windshield, set the air intake control
to the fresh air position and fan speed
to the desired position, turn on the air
conditioning system, and adjust the
temperature control to the desired
temperature.
5-112
05
Air conditioning
NOTICE
HYUNDAI Air Conditioning Systems are
• The refrigerant system should only
filled with R-1234yf refrigerant.
be serviced by trained and certified
1.
Start the engine. Push the air
technicians to insure proper and safe
conditioning button.
operation.
2.
Set the mode to the position.
• The refrigerant system should be
serviced in a well-ventilated place.
3.
Set the air intake control to the
outside air or recirculated air position.
• The air conditioning evaporator
(cooling coil) shall never be repaired
4.
Adjust the fan speed control and
or replaced with one removed from
temperature control to maintain
a used or salvaged vehicle and new
maximum comfort.
replacement MAC evaporators shall
be certified (and labeled) as meeting
SAE Standard J2842.
Information
NOTICE
• When using the air conditioning
system, monitor the temperature
gauge closely while driving up
hills or in heavy traffic when
outside temperatures are high.
Air conditioning system operation
may cause engine overheating.
Continue to use the fan but turn the
air conditioning system off if the
temperature gauge indicates engine
ONX4050071
overheating.
Your vehicle is filled with R1234yf
• When opening the windows in humid
according to the regulation in your
weather air conditioning may create
country at the time of production. You can
water droplets inside the vehicle.
find out which air conditioning refrigerant
Since excessive water droplets
is applied to your vehicle on the label
may cause damage to electrical
located inside of the hood. Refer to chapter
equipment, air conditioning should
8 for the location of the air conditioning
only be used with the windows
refrigerant label.
closed.
5-113
Convenient features
Air conditioning system operation tips
System maintenance
•
If the vehicle has been parked in
Cabin air filter
direct sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.
•
After sufficient cooling has been
achieved, switch back from the
recirculated air to the fresh outside air
position.
•
To help reduce moisture inside of
the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
OIK047401L
conditioning system with the windows
[A] : Outside air, [B] : Recirculated air
and sunroof closed.
[C] : Cabin air filter, [D] : Blower
[E] : Evaporator core, [F] : Heater core
•
Use the air conditioning system every
month for a few minutes to ensure
The cabin air filter is installed behind
maximum system performance.
the glove box. It filters the dust or other
•
If you operate the air conditioner
pollutants that enter the vehicle through
excessively, the difference between
the heating and air conditioning system.
the temperature of the outside air and
We recommend that the cabin air filter
that of the windshield could cause
be replaced by an authorized HYUNDAI
the outer surface of the windshield to
dealer according to the maintenance
fog up, causing loss of visibility. In this
schedule. If the vehicle is being driven
case, set the mode selection button to
in severe conditions such as dusty or
the
position and set the fan speed
rough roads, more frequent climate
control knob to the lowest speed
control filter inspections and changes are
setting.
required.
If the air flow rate suddenly decreases,
we recommend the system be checked
at an authorized HYUNDAI dealer.
5-114
05
Air Conditioning Performance and
Maintenance at Your HYUNDAI
Dealer
When the amount of refrigerant is low,
the performance of the air conditioning
is reduced. Overfilling also reduces the
performance of the air conditioning system.
Therefore, if abnormal operation is found, we
recommend that the system be inspected by
an authorized HYUNDAI dealer.
ONX4050071
NOTICE
Air Conditioning refrigerant label
It is important that the correct type and
You can find out which air conditioning
amount of oil and refrigerant is used.
refrigerant is applied to your vehicle on
Otherwise, damage to the compressor
the label located inside of the hood.
and abnormal system operation may
occur. To prevent damage, the air
Example
conditioning system in your vehicle
should only be serviced by trained and
certified technicians.
WARNING
Vehicles equipped with R-1234yf
Since the refrigerant is
mildly flammable and
operated at high pressure,
OHYK059001
the air conditioning system
should only be serviced
Each symbol and specification on the
by trained and certified
air conditioning refrigerant label is
technicians. It is important
represented as below:
that the correct type and
1. Classification of refrigerant
amount of oil and refrigerant
2. Amount of refrigerant
are used.
3. Classification of compressor lubricant
All refrigerants should be reclaimed
with proper equipment.
4. Caution
Venting refrigerants directly to the
5. Flammable refrigerant
atmosphere is harmful to individuals
6. To require registered technician to
and environment. Failure to heed these
service air conditioning system
warnings can lead to serious injuries.
5-115
Convenient features
WINDSHIELD DEFROSTING AND DEFOGGING
Manual climate control system
WARNING
To defog inside windshield
Windshield heating
Do not use the position during
cooling operation in extremely humid
weather. The difference between the
temperature of the outside air and that
of the windshield could cause the outer
surface of the windshield to fog up,
causing loss of visibility could cause
an accident resulting in serious injury
or death. In this case, set the mode
selection button to the position
and fan speed control knob to a lower
speed.
ONX4050132
1. Select any fan speed except “0”
• For maximum defrost performance,
position.
set the temperature control to the
2. Select the desired temperature.
highest temperature setting and
3. Press the defroster button (
).
the fan speed control to the highest
setting.
4. The outside (fresh) air will be selected
automatically. Additionally, the
• If warm air to the floor is desired while
air conditioning (if equipped) will
defrosting or defogging, set the mode
automatically operate if the mode is
to the floor-defrost position.
selected to the
position.
• Before driving, clear all snow and ice
If the air conditioning and outside
from the windshield, rear window,
(fresh) air position are not selected
side view mirrors, and all side
automatically, press the corresponding
windows.
button manually.
• Clear all snow and ice from the
hood and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up the inside of
the windshield.
NOTICE
If the engine temperature is still cold
after starting, then a brief engine warm
up period may be required for the
vented air flow to become warm or hot.
5-116
05
To defrost outside windshield
Automatic climate control
system
To defog inside windshield
ONX4050133
1. Set the fan speed to the highest
(extreme right) position.
ONX4050144N
2. Set the temperature to the extreme
hot position.
3. Press the defroster button (
).
4. The outside (fresh) air and air
conditioning (if equipped) will be
selected automatically.
ONX4050145N
1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defroster button (
).
4. The air-conditioning will turn on
according to the detected ambient
temperature, outside (fresh) air
position and higher fan speed will be
selected automatically.
If the air-conditioning, outside (fresh)
air position and higher fan speed are
not selected automatically, adjust the
corresponding button or knob manually.
If the
position is selected, lower fan
speed is controlled to higher fan speed.
5-117
Convenient features
To defrost outside windshield
Auto Defogging System
on Models with Automatic
Temperature Control
Auto defogging help reduce the
possibility of fogging up the inside of the
windshield by automatically sensing the
moisture on inside the windshield.
The auto defogging system operates
when the heater or air conditioning is on.
Information
ONX4050146N
The auto defogging system may not
operate normally, when the outside
temperature is below 14°F(-10°C).
To cancel or set the Auto Defogging
System, keep the front defroster button
pressed for 3 seconds. The “ADS OFF”
symbol will be shown in the climate
display to inform you that the system
is deactivated. To re-activate the auto
defogging system, follow the procedure
mentioned above and the “ADS OFF”
ONX4050147N
symbol will disappear.
1.
Set fan speed to the highest position.
If the battery has been disconnected
2.
Set temperature to the extreme hot
or discharged, it resets to the auto
(HI) position.
defogging status.
3.
Press the defroster button (
).
4.
The air-conditioning will turn
Information
on according to the detected
For efficiency, do not select recirculated
ambient temperature and outside
air position while the Auto defogging
(fresh) air position will be selected
system is operating.
automatically.
If the
position is selected, lower fan
NOTICE
speed is controlled to higher fan speed.
Do not remove the sensor cover located
on the top of the windshield glass.
Damage to system parts could occur
and may not be covered by your vehicle
warranty.
5-118
05
Rear window defroster
Information
• If there is heavy accumulation of snow
NOTICE
on the rear window, brush it off before
To prevent damage to the rear window
operating the rear defroster.
defroster conducting elements bonded
• The rear window defroster
to the inside surface of the rear window,
automatically turns off after
never use sharp instruments or window
approximately 20 minutes or when the
cleaners containing abrasives to clean
Engine Start/Stop button is in the OFF
the window.
position.
The defroster heats the
Side view mirror defroster (if
window to remove frost, fog
equipped)
and thin ice from the interior
If your vehicle is equipped with the Side
and exterior of the rear
view mirror defrosters, they will operate
window, while the engine is
at the same time you turn on the rear
running.
window defroster.
• To activate the rear window defroster,
press the rear window defroster
button located in the center control
panel. The indicator on the rear
window defroster button illuminates
when the defroster is ON.
• To turn off the defroster, press the rear
window defroster button again.
5-119
Convenient features
CLIMATE CONTROL ADDITIONAL FEATURES
Auto Defogging System
Turning the Auto Defogging System
on Models with Automatic
ON or OFF
Temperature Control
Climate control system
Press the front windshield defroster
button for 3 seconds when the Engine
Start/Stop button is in the ON position.
When the Auto Defogging System is
turned off, the ADS OFF symbol will blink
3 times and ADS OFF will be displayed on
the climate control information screen.
When the Auto Defogging System is
turned on, the ADS OFF symbol will blink
6 times without a signal.
ONX4050046
Infotainment system
Auto defogging helps reduce the
Auto Defogging System can be turned
possibility of fogging up the inside of the
on and off by selecting ‘Setup →
windshield by automatically sensing the
Vehicle Settings → Climate → Defog/
moisture on inside the windshield.
Defrost Options → Auto Defog’ from the
The auto defogging system operates
infotainment system screen.
when the heater or air conditioning is on.
For detailed information, refer to the
separately supplied infotainment
system manual.
Information
The auto defogging system may not
operate normally, when the outside
Information
temperature is below 14°F (10°C).
• When the air conditioning is turned
on by Auto Defogging System, if you
When the Auto Defogging
try to turn off the air conditioning, the
System operates, the indicator
indicator will blink 3 times and the air
will illuminate.
conditioning will not be turned off.
If a high amount of humidity is detected
• To maintain the effectiveness and
in the vehicle, the Auto Defogging
efficiency of the Auto Defogging
System will be enabled. The following
System, do not select Recirculation
steps will be performed automatically:
mode while the system is operating.
Step 1) Air conditioning will turn ON.
• When Auto Defogging System is
Step 2) Air intake control will change to
operating, fan speed adjustment,
Fresh mode.
temperature adjustment, and air intake
control selection are all disabled.
Step 3) Mode will change to defrost to
direct airflow to the windshield.
Step 4) Fan speed will be set to MAX.
NOTICE
Do not remove the sensor cover located
If the air conditioning is off or
on the upper end of the windshield
recirculation mode is manually selected
glass.
while Auto Defogging System is ON, the
Auto Defogging System indicator will
Damage to system parts could occur
blink 3 times to signal that the manual
and may not be covered by your vehicle
operation has been canceled.
warranty.
5-120
05
Auto dehumidify (if equipped)
Recirculating air when washer
To increase cabin air quality and reduce
fluid is used
windshield misting, recirculation mode
Recirculation mode automatically
switches off automatically after about 5
activates to reduce any objectionable
to 30 minutes, depending on the outside
scent of the washer fluid from entering
temperature, and the air intake will
the cabin when the windshield washer is
change to fresh mode.
used.
When it is shifted to the recirculation
Turning Auto Dehumidify ON or OFF
mode, the unpleasant scent may flow
Climate control system
into the vehicle.
To turn the Auto Dehumidify feature on
However, in cold weather to prevent
or off, select Face level (
) mode and
the windshield from fogging up, the
while holding down the A/C icon, press
recirculation mode may not be selected.
the air intake control (
) button at
least five times within three seconds.
Turning Activate upon Washer Fluid
When Auto Dehumidify is turned on,
Use ON or OFF
the air intake control button indicator
Climate control system
will blink 6 times. When turned off, the
indicator will blink 3 times.
To turn the Activate upon Washer Fluid
Use feature on or off, select Floor level
(
) mode, and then press the air
Infotainment system
intake control (
) button four times
Auto Dehumidify can be turned on and
within two seconds while pressing the
off by selecting ‘Setup → Vehicle Settings
A/C icon.
→ Climate → Automatic Ventilation →
When Activate upon Washer Fluid Use
Auto Dehumidify’ from the infotainment
ON is turned on, the air intake control
system screen.
button indicator will blink 6 times. When
For detailed information, refer to the
turned off, the indicator will blink 3
separately supplied infotainment
times.
system manual.
Infotainment system
Activate upon Washer Fluid Use can be
turned on and off by selecting ‘Setup →
Vehicle Settings → Climate → Recirculate
Air → Activate upon Washer Fluid Use
(or Interlocking washer fluid)’ from the
infotainment system screen.
For detailed information, refer to the
separately supplied infotainment
system manual.
5-121
Convenient features
Sunroof inside air recirculation
Scheduled Ventilation Control
(if equipped)
The Scheduled Ventilation Control
When the sunroof is opened, fresh
releases hot air in the vehicle to lower
mode will be automatically selected.
cabin temperature before getting in the
At this time, if you press the air intake
vehicle.
control button, recirculation mode will
Depending on the outside ambient
be selected but will change back to fresh
temperature, the blower is operated for 5
mode after 3 minutes. When the sunroof
to 15 minutes while the vehicle is parked.
is closed, the air intake position will
return to the original position that was
Turning Schedule Ventilation
selected.
Control On or Off
The Schedule Ventilation Control can be
Automatic Controls for the
turned on and off by selecting ‘Setup →
Driver Based on Climate Control
Vehicle Settings → Automatic Ventilation
System Settings
→ Scheduled Ventilation Control’ from
The temperature of the driver’s seat
the infotainment system screen. Also, the
warmer, air ventilated seat and heated
starting time can be set within 24 hours.
steering wheel is automatically
Schedule Ventilation Control operates
controlled depending on the inside and
only once when the feature is set.
outside temperature of the vehicle when
the engine is running.
To use these features, it must be
enabled from the Settings menu in the
infotainment system screen. Select:
--
Setup → Vehicle Settings → Seat →
Heated/Ventilated Features → Heated/
Ventilated Features → Auto. Controls
That Use Climate Control Settings
For more details on Auto Comfort
Control, refer to “Seat Warmers” and
“Air ventilation seats” section in chapter
3 and “Heated Steering Wheel” section
in chapter 5.
5-122
05
STORAGE COMPARTMENT
Center console storage
WARNING
Never store cigarette lighters, propane
cylinders, or other flammable/explosive
materials in the vehicle. These items
may catch fire and/or explode if the
vehicle is exposed to hot temperatures
for extended periods.
WARNING
ALWAYS keep the storage compartment
covers closed securely while driving.
ONX4050047
Items inside your vehicle are moving as
fast as the vehicle. If you have to stop
To open:
or turn quickly, or if there is a crash, the
Press the button.
items may fly out of the compartment
and may cause an injury if they strike
the driver or a passenger.
NOTICE
To avoid possible theft, do not leave
valuables in the storage compartments.
5-123
Convenient features
Glove box
Luggage tray
ONX4050048
ONX4050096N
To open:
You can place a first aid kit, a reflector
triangle (front tray), tools, etc. in the box
Pull the lever.
for easy access.
• Grasp the handle on the top of the
WARNING
cover and lift it.
ALWAYS close the glove box door after
use.
An open glove box door can cause
serious injury to the passenger in an
accident, even if the passenger is
wearing a seat belt.
5-124
05
INTERIOR FEATURES
Cup holder
WARNING
Front
• Avoid abrupt starting and braking
when the cup holder is in use to
prevent spilling your drink. If hot
liquid spills, you could be burned.
Such a burn to the driver could cause
loss of vehicle control resulting in an
accident.
• Do not place uncovered or unsecured
cups, bottles, cans, etc., in the cup
holder containing hot liquid while
the vehicle is in motion. Injuries may
ONX4050050
result in the event of a sudden stop
Rear
or collision.
• Only use soft cups in the cup holders.
Hard objects can injure you in an
accident.
WARNING
Keep cans or bottles out of direct sun
light and do not put them in a hot
vehicle. It may explode.
ONX4050051
Cups or small beverages cups may be
NOTICE
placed in the cup holders.
• Keep your drinks sealed while
driving to prevent spilling your drink.
If liquid spills, it may get into the
vehicle’s electrical/electronic system
and damage electrical/electronic
parts.
• When cleaning spilled liquids do not
use hot air to blow out or dry the cup
holder. This may damage the interior.
5-125
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст