Hyundai Tucson (2022 year). Manual in english — page 15
07
MANUAL SPEED LIMIT ASSIST (MSLA)
Manual Speed Limit Assist
Operation
To set speed limit
OTM070111L
(1) Manual Speed Limit Assist enabled
indicator
(2) Set speed
ONX4070032
You can set the speed limit when you do
1. Press and hold Driving Assist
not want to drive over a specific speed.
(
) button at the desired speed. The
If you drive over the preset speed limit,
Manual Speed Limit Assist enabled
Manual Speed Limit Assist will operate
(
) indicator will illuminate on
(set speed limit will blink and chime will
the cluster.
sound) until the vehicle speed returns
within the speed limit.
OCN7060143
OCN7060144
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase
or decrease to the nearest multiple of
five (multiple of ten in km/h) at first,
and then increase or decrease by 5
mph (10 km/h).
7-57
Driver assistance system
To temporarily pause Manual Speed
Limit Assist
OTM070203L
3. The set speed limit will be displayed
on the cluster.
OCN7060063
If you would like to drive over the
Push the
switch to temporarily
preset speed limit, depress the
pause the set speed limit. The set speed
accelerator pedal beyond the pressure
limit will turn off but the Manual Speed
point to activate the kickdown
Limit Assist enabled (
) indicator
mechanism.
will stay on.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
Information
• When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
• A clicking sound may be heard from
the kickdown mechanism when the
accelerator pedal is depressed beyond
the pressure point.
7-58
07
To resume Manual Speed Limit
To turn off Manual Speed Limit
Assist
Assist
OCN7060143
OCN7060144
ONX4070032
To resume Manual Speed Limit Assist
Press the Driving Assist (
) button
after the function was paused, push the
to turn Manual Speed Limit Assist off.
+, -,
switch.
The Manual Speed Limit Assist enabled
(
) indicator will go off.
If you push the + switch up or - switch
down, vehicle speed will be set to the
Always press the Driving Assist (
)
current speed on the cluster.
button to turn Manual Speed Limit Assist
off when not in use.
If you push the
switch, vehicle speed
will resume to the preset speed.
WARNING
Take the following precautions when
using Manual Speed Limit Assist:
• Always set the vehicle speed to the
speed limit in your country.
• Keep Manual Speed Limit Assist off
when the function is not in use, to
avoid inadvertently setting a speed.
Check that the Manual Speed Limit
Assist enabled (
) indicator is
off.
• Manual Speed Limit Assist does
not substitute for proper and safe
driving. It is the responsibility of
the driver to always drive safely
and should always be aware of
unexpected and sudden situations
from occurring. Pay attention to the
road conditions at all times.
7-59
Driver assistance system
INTELLIGENT SPEED LIMIT ASSIST (ISLA) (IF EQUIPPED)
Intelligent Speed Limit Assist uses
Intelligent Speed Limit Assist
information from the detected road sign
Settings
and navigation system to inform the
Setting features
driver of the speed limit and additional
information of the current road. Also,
Speed limit
Intelligent Speed Limit Assist helps the
With the engine on, select or deselect
driver to maintain within the speed limit
‘Vehicle settings → Speed limit’ from the
of the road.
Settings menu to set whether or not to
use each function.
--
If ‘Speed limit assist’ is selected,
CAUTION
Intelligent Speed Limit Assist will
Intelligent Speed Limit Assist may not
inform the driver of speed limit and
operate properly if the function is used
additional road signs. In addition,
in other countries.
Intelligent Speed Limit Assist will
inform the driver to change set speed
Detecting sensor
of Manual Speed Limit Assist or Smart
Cruise Control to help the driver stay
within the speed limit.
--
If ‘Speed limit warning’ is selected,
Intelligent Speed Limit Assist will
inform the driver of speed limit and
additional road signs. In addition,
Intelligent Speed Limit Assist will warn
the driver when the vehicle is driven
faster than the speed limit.
--
If ‘Off’ is selected, Intelligent Speed
Limit Assist will turn off.
ONX4E050146
[1] : Front view camera
CAUTION
Refer to the picture above for the
detailed location of the detecting sensor.
If ‘Speed limit warning’ is selected,
Intelligent Speed Limit Assist will not
inform the driver to adjust set speed.
CAUTION
For more details on the precautions
Speed Limit Offset
of the front view camera, refer to
With the Engine Start/Stop button in the
“Forward Collision-Avoidance Assist
ON position, when ‘Driver assistance
(FCA)” section in chapter 7.
→ Speed limit → Speed limit tolerance’
is selected, the Speed limit tolerance
can be changed. Speed Limit Warning
Information
and Speed Limit Assist will operate
If the navigation system is available, the
by applying the Speed limit tolerance
information from the navigation system is
setting to the detected speed limit.
used along with the road sign information
detected by the front view camera.
7-60
07
WARNING
• For your safety, change the Settings
after parking the vehicle at a safe
location.
• Speed Limit Assist function operates
based on the Speed limit tolerance
setting added to the speed limit. If
you want to change the set speed
according to the speed limit, adjust
the offset to ‘0’.
ONX4E070094
ONX4E070095
• Speed Limit Warning function warns
the driver when driving speed
Displaying speed limit
exceeds the speed at which the set
Speed limit information is displayed on
Speed limit tolerance is added to
the instrument cluster.
speed limit. If you want Speed limit
warning to warn you immediately
when the driving speed exceeds the
Information
speed limit, adjust the offset to ‘0’.
•
If speed limit information of the road
• Navigation-based Smart Cruise
cannot be recognized, '---' sign will be
Control (NSCC) function does not
displayed. Please refer to "Limitations
reflect Speed Limit Tolerance set-up.
of Intelligent Speed Limit Assist " if the
road signs are difficult to recognize.
Intelligent Speed Limit Assist
•
Supplementary sign displayed under
Operation
the speed limit or overtaking restriction
Warning and control
sign means the conditions under
which the signs must be followed. If
Intelligent Speed Limit Assist will warn
supplementary sign is not recognized, it
and control the vehicle by ‘Displaying
will be displayed as blank.
speed limit’, ‘Warning overspeed’ and
‘Changing set speed’.
•
Intelligent Speed Limit Assist provides
additional road sign information in
addition to speed limit. The additional
Information
road sign information provided may
vary according to your country.
Intelligent Speed Limit Assist warning and
control are described based on the Offset
adjust to '0'. For details on Offset setting,
refer to the “Intelligent Speed Limit Assist
Settings”.
7-61
Driver assistance system
WARNING
•
If the Speed limit tolerance is set
over ‘0’, the set speed will change
to a higher speed than the speed
limit of the road. If you want to drive
below the speed limit, set the Speed
limit tolerance under '0' or use the
- switch on the steering wheel to
lower the set speed.
•
Even after changing the set speed
ONX4E070096
according to the speed limit of the
Warning overspeed
road, the vehicle can still be driven
over the speed limit. If necessary,
When driving at a speed higher than the
depress the brake pedal to reduce
displayed speed limit, the speed limit is
your driving speed.
displayed in red.
•
If the speed limit of the road is under
20 mph (30 km/h), the set speed
change function will not work.
•
Intelligent Speed Limit Assist
operates using the speed unit in the
instrument cluster set by the driver.
If the speed unit is set to a unit other
than the speed unit used in your
country, Intelligent Speed Limit
Assist may not operate properly.
ONX4E070097
ONX4E070098
Information
Changing set speed
•
For more details on Manual Speed
Limit Assist operation, refer to
If the speed limit of the road changes
“Manual Speed Limit Assist (MSLA)”
during the operation of Manual Speed
section in chapter 7.
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
•
For more details on Smart Cruise
displayed to inform the driver that the set
Control operation, refer to “Smart
speed needs to be changed. At this time,
Cruise Control (SCC)” section in
the driver can change the set speed
chapter 7.
according to the speed limit by using the
+ or - switch on the steering wheel.
7-62
07
Intelligent Speed Limit Assist
Intelligent Speed Limit Assist
Malfunction and Limitations
disabled
Intelligent Speed Limit Assist
malfunction
OTM070226L
When the front windshield where the
OBC3070032
front view camera is located is covered
with foreign material, such as snow
When Intelligent Speed Limit Assist is not
or rain, it can reduce the detecting
working properly, the ‘Check speed limit
performance and temporarily limit or
system’ warning message will appear on
disable Intelligent Speed Limit Assist.
the cluster. If this occurs, we recommend
If this occurs, the ‘Speed limit system
that the vehicle be inspected by an
disabled. Camera obscured’ warning
authorized HYUNDAI dealer.
message will appear on the cluster.
Intelligent Speed Limit Assist will operate
normally when snow, rain or foreign
material is removed.
If Intelligent Speed Limit Assist does not
operate normally after it is removed,
we recommend that the vehicle be
inspected by an authorized HYUNDAI
dealer.
WARNING
• Even though the warning message or
warning light does not appear on the
cluster, Intelligent Speed Limit Assist
may not operate properly.
• If the detecting sensor is
contaminated immediately after
starting the engine, Intelligent
Speed Limit Assist may not operate
properly.
7-63
Driver assistance system
Limitations of Intelligent Speed
• The field of view of the front view
Limit Assist
camera is obstructed by sun glare
Intelligent Speed Limit Assist may not
• Driving on a road that is sharply
operate or may not provide correct
curved or continuously curved
information under the following
• Driving through speed bumps, or
circumstances:
driving up and down or left to right on
•
The road sign is contaminated or
steep inclines
indistinguishable
• The vehicle is shaking heavily
--
The road sign is difficult to see due
to bad weather, such as rain, snow,
Information
fog, etc.
For more details on the limitations of the
--
The road sign is not clear or
front view camera, refer to “Forward
damaged
Collision-Avoidance Assist (FCA)” section
--
The road sign is partially obscured
in chapter 7.
by surrounding objects or shadow
•
The road signs do not conform to the
standard
WARNING
--
The text or picture on the road sign
•
Intelligent Speed Limit Assist is a
is different from the standard
supplemental function that helps the
driver to comply with the speed limit
--
The road sign is installed between
on the road, and may not display the
the main line and the exit road or
correct speed limit or control the
between diverging roads
driving speed properly.
--
There is no conditional road signs
•
Always set the vehicle speed to the
on the road sign located on the exit
speed limit in your country.
road
--
A sign is attached to another vehicle
•
The brightness changes suddenly, for
example when entering or exiting a
tunnel or passing under a bridge
•
Headlamps are not used or the
brightness of the headlamps are weak
at night or in the tunnel
•
Road signs are difficult to recognize
due to the reflection of sunlight, street
lights, or oncoming vehicles
•
The distance between the driving lane
and the road sign is far
•
Luminous road signs
•
There is a similar object or text which
is in the road sign or an object like a
road sign
•
There is an error in the navigation map
data or GPS data
•
The vehicle does not drive based on
the route guidance
7-64
07
DRIVER ATTENTION WARNING (DAW)
Basic function
Driver Attention Warning
Driver Attention Warning will help
Settings
determine the driver's attention level by
Setting features
analyzing driving pattern, driving time,
Type A
Type B
etc. while vehicle is being driven. Driver
Attention Warning will recommend a
break when the driver’s attention level
falls below a certain level.
Leading Vehicle Departure Alert
function
Leading Vehicle Departure Alert function
will inform the driver when a detected
vehicle in front departs from a stop.
OTM070188N
OTM070188L
Detecting sensor
Driver Attention Warning
With the engine on, select ‘Driver
Assistance → Driver Attention Warning (or
DAW (Driver Attention Warning))’ from
the Settings menu to set whether or not
to use each function.
--
If ‘Inattentive Driving Warning’ (or
‘Swaying warning’) is selected, Driver
Attention Warning will inform the
driver of the driver’s attention level
and will recommend taking a break
when the level falls below a certain
ONX4E050146
level.
[1] : Front view camera
The front view camera is used to detect
Type A
Type B
driving patterns and front vehicle
departure while vehicle is being driven.
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Always keep the front view camera in
good condition to maintain optimal
performance of Driver Attention
Warning.
OTM070189N
OTM070189L
For more details on the precautions
Leading Vehicle Departure Alert
of the front view camera, refer to
--
If ‘Leading Vehicle Departure Alert’ is
“Forward Collision-Avoidance Assist
selected, the function will inform the
(FCA)” section in chapter 7.
driver when a detected vehicle in front
departs from a stop.
7-65
Driver assistance system
Driver Attention Warning
Operation
Basic function
Display and warning
The basic function of Driver Attention
Warning is to inform the driver of their
‘Attention Level’ and to warn the driver to
‘Consider taking a break’.
Attention level
OTM070140N
System off
Standby
Warning Timing
With the engine on, select ‘Driver
Assistance → Warning Timing’ from the
Settings menu to change the initial
warning activation time for Driver
Attention Warning.
When the vehicle is first delivered,
Warning Timing is set to ‘Normal’. If you
change the Warning Timing, the warning
time of other Driver Assistance systems
OTM070102N
OTM070106N
may change.
Attentive driving
Inattentive driving
Information
If the engine is restarted, Driver Attention
Warning will maintain the last setting.
OBC3070068
OTM070191N
• The driver can monitor his/her driving
conditions on the cluster.
--
When the ‘Inattentive Driving
Warning’ is deselected from the
Settings menu, ‘System Off’ is
displayed.
--
Driver Attention Warning will
operate when vehicle speed is
between 0~110 mph (0~180 km/h).
--
When vehicle speed is not within
the operating speed, the message
‘Standby’ will be displayed.
7-66
07
• The driver’s attention level is displayed
CAUTION
on the scale of 1 to 5. The lower the
level is, the more inattentive the driver
•
Driver Attention Warning may
is.
suggest a break depending on the
driver’s driving pattern or habits,
• The level decreases when the driver
even if the driver doesn’t feel
does not take a break for a certain
fatigued.
period of time.
•
Driver Attention Warning is a
supplemental function and may not
Taking a break
be able to determine whether the
driver is inattentive.
•
The driver who feels fatigued should
take a break at a safe location, even
though there is no break suggestion
by Driver Attention Warning.
Information
•
You may change settings from the
instrument cluster (User Settings) or
infotainment system (Vehicle Settings),
OTM070105L
whichever option that is provided with
•
The ‘Consider taking a break’ message
your vehicle. For more details, see
will appear on the cluster and an
"User Settings" section in chapter 4, or
audible warning will sound to suggest
"Vehicle Settings" section in supplied
that the driver take a break, when the
Infotainment Manual.
driver’s attention level is below 1.
•
Driver Attention Warning will reset the
•
Driver Attention Warning will not
last break time to 00:00 in the following
suggest a break when the total driving
situations:
time is shorter than 10 minutes or 10
--
The engine is turned off
minutes has not passed after the last
break was suggested.
--
The driver unfastens the seat belt
and opens the driver’s door
--
The vehicle is stopped for more than
WARNING
10 minutes
For your safety, change the Settings
•
When the driver resets Driver Attention
after parking the vehicle at a safe
Warning, the last break time is set to
location.
00:00 and the driver’s attention level is
set to High.
7-67
Driver assistance system
Leading Vehicle Departure Alert
Driver Attention Warning
function
Malfunction and Limitations
Driver Attention Warning
malfunction
ONX4E070099
When a detected vehicle in front departs
from a stop, Leading Vehicle Departure
OTM070107L
Alert will inform the driver by displaying
When Driver Attention Warning is not
the ‘Leading vehicle is driving away’
working properly, the ‘Check Driver
message on the cluster and an audible
Attention Warning (DAW) system’
warning will sound.
warning message will appear on the
cluster. If this occurs, have the vehicle
inspected by an authorized HYUNDAI
WARNING
dealer.
•
If any other system’s warning
message is displayed or audible
Limitations of Driver Attention
warning is generated, Leading
Warning
Vehicle Departure Alert's warning
Driver Attention Warning may not work
message may not be displayed
and audible warning may not be
properly in the following situations:
generated.
• The vehicle is driven violently
•
The driver should hold the
• The vehicle intentionally crosses over
responsibility to safely drive and
lanes frequently
control the vehicle.
• The vehicle is controlled by Driver
Assistance system, such as Lane
Keeping Assist
CAUTION
•
Leading Vehicle Departure Alert is a
supplemental function and may not
alert the driver whenever the front
vehicle departs from a stop.
•
Always check the front of the
vehicle and road conditions before
departure.
7-68
07
Leading Vehicle Departure Alert feature
• When the vehicle ahead sharply steers
• When the vehicle cuts in
OADAS034
[A] : Your vehicle, [B] : Front vehicle
OADAS021
If the vehicle in front makes a sharp
turn, such as to turn left or right or
make a U-turn, etc., Leading Vehicle
Departure Alert may not operate
properly.
• When the vehicle ahead abruptly
departures
OADAS022
[A] : Your vehicle, [B] : Front vehicle
If a vehicle cuts in front of your
vehicle, Leading Departure Alert may
not operate properly.
OADAS024
If the vehicle in front abruptly
departures, Leading Vehicle Departure
Alert may not operate properly.
7-69
Driver assistance system
• When a pedestrian or bicycle is
• When driving at a tollgate or
between you and the vehicle ahead
intersection, etc.
OADAS025
OADAS026
If there is a pedestrian(s) or bicycle(s)
If you pass a tollgate or intersection
in between you and the vehicle in
with lots of vehicles or you drive
front, Leading Vehicle Departure Alert
where lanes are merged or divided
may not operate properly.
frequently, Leading Vehicle Departure
Alert may not operate properly.
• When in a parking lot
Information
For more details on the precautions of
the front view camera, refer to “Forward
Collision-Avoidance Assist (FCA)” section
in chapter 7.
OADAS027
If a vehicle parked in front drives away
from you, Leading Vehicle Departure
Alert may alert you that the parked
vehicle is driving away.
7-70
07
BLIND-SPOT VIEW MONITOR (BVM) (IF EQUIPPED)
Left side
Right side
Blind-Spot View Monitor
Settings
Setting features
Blind-Spot View
With the engine on, select ‘Driver
Assistance → Blind-Spot Safety → Blind-
Spot View’ from the Settings menu to
turn on Blind-Spot View Monitor and
deselect to turn off the function.
ONX4070080
ONX4070081
Blind-Spot View Monitor
Blind-Spot View Monitor displays the
Operation
rear blind spot area of the vehicle in the
Operating switch
cluster when the turn signal is turned on
to help change lanes.
Detecting sensor
ODN8059207
Turn Signal switch
Blind-Spot View Monitor will turn on and
ONX4E070031
off when the turn signal is turned on and
[1], [2] : SVM-side view camera
off.
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting
sensors.
7-71
Driver assistance system
Blind-Spot View Monitor
Blind-Spot View Monitor
Operating conditions
Malfunction
When the left or right side turn signal
When Blind-Spot View Monitor is not
turns on, the image in that direction is
working properly, or the cluster display
displayed on the instrument cluster.
flickers, or the camera image does
not display normally, have the vehicle
Off conditions
inspected by an authorized HYUNDAI
dealer.
• When the turn signal turns off, the
image on the instrument cluster will
turn off.
WARNING
• When the hazard warning flasher
• The image shown on the cluster may
is on, Blind-Spot View Monitor will
differ from the actual distance of the
turn off, regardless of the turn signal
object. Make sure to directly check
status.
the vehicle's surroundings for safety.
• When other important warning is
• Always keep the camera lens clean.
displayed on the instrument cluster,
If the lens is covered with foreign
Blind-Spot View Monitor may turn off.
material, it may adversely affect
camera performance and Blind-
Spot View Monitor may not operate
normally.
7-72
07
CRUISE CONTROL (CC) (IF EQUIPPED)
Cruise Control Operation
Operating conditions
1. Accelerate to the desired speed,
which must be more than 20 mph (30
km/h).
OTM070111
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at
speeds above 20 mph (30 km/h) without
ONX4070032
depressing the accelerator pedal.
2. Press the Driving Assist (
) button
at the desired speed. The set speed
and Cruise (
) indicator will
illuminate on the cluster.
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
Information
On a steep slope, the vehicle may slightly
slow down or speed up while driving uphill
or downhill.
7-73
Driver assistance system
To increase speed
To decrease speed
OCN7060143
OCN7060144
•
Push the + switch up and release it
• Push the - switch down and release it
immediately. The cruising speed will
immediately. The cruising speed will
increase by 1 mph (1 km/h) each time
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.
the switch is operated in this manner.
•
Push the + switch up and hold it
• Push the - switch down and hold it
while monitoring the set speed on
while monitoring the set speed on
the cluster. The cruising speed will
the cluster. The cruising speed will
increase to the nearest multiple of
decrease to the nearest multiple of
five in mph (multiple of ten) at first,
five in mph (multiple of ten) at first,
and then increase by 5 mph (10 km/h)
and then decrease by 5 mph (10 km/h)
each time the switch is operated in
each time the switch is operated in
this manner.
this manner.
Release the switch when the desired
Release the switch at the speed you
speed is shown and the vehicle will
want to maintain.
accelerate to that speed.
To temporarily accelerate
If you want to speed up temporarily
when Cruise Control is on, depress the
accelerator pedal.
To return to the set speed, take your foot
off the accelerator pedal.
If you push the + switch up or - switch
down at increased speed, the cruising
speed will be set to the current increased
speed.
7-74
07
To temporarily pause Cruise Control
To resume Cruise Control
OCN7060063
OCN7060145
Cruise Control will be paused when:
Push the +, - switch or
button.
• Depressing the brake pedal.
If you push the + switch up or - switch
down, vehicle speed will be set to the
• Pushing the
button.
current speed on the cluster.
• Shifting the gear to N (Neutral).
If you push the
button, vehicle
• Decreasing vehicle speed to less than
speed will resume to the preset speed.
approximately 20 mph (30 km/h).
Vehicle speed must be above 20 mph
• ESC (Electronic Stability Control) is
(30 km/h) for the function to resume.
operating.
• Downshifting to 2nd gear when in
Manual Shift mode.
WARNING
Check the driving condition before
The set speed will turn off but the Cruise
using the
button. Driving speed
(
) indicator will stay on.
may sharply increase or decrease when
you press the
button.
NOTICE
If Cruise Control pauses during a
situation that is not mentioned, have
the vehicle inspected by an authorized
HYUNDAI dealer.
7-75
Driver assistance system
To turn off Cruise Control
WARNING
Take the following precautions when
using Cruise Control:
•
Always set the vehicle speed to the
speed limit in your country.
•
Keep Cruise Control off when the
function is not in use, to avoid
inadvertently setting a speed. Check
that the Cruise (
) indicator is
off.
•
Cruise Control does not substitute
ONX4070032
for proper and safe driving. It is the
Press the Driving Assist (
) button
responsibility of the driver to always
to turn Cruise Control off. The Cruise
drive safely and should always be
(
) indicator will go off.
aware of unexpected and sudden
situations from occurring.
Always press the Driving Assist (
)
button to turn Cruise Control off when
•
Always drive cautiously to prevent
not in use.
unexpected and sudden situations
from occurring. Pay attention to the
road conditions at all times.
Information
•
Do not use Cruise Control when it
If your vehicle is equipped with Manual
may be unsafe to keep the vehicle at
Speed Limit Assist, press and hold the
a constant speed:
Driving Assist button to turn off Cruise
--
When driving in heavy traffic, or
Control. However, Manual Speed Limit
when traffic conditions make it
Assist will turn on.
difficult to drive at a constant
speed
--
When driving on rainy, icy, or
snow-covered roads
--
When driving on hilly or windy
roads
--
When driving in windy areas
--
When driving with limited view
(possibly due to bad weather, such
as fog, snow, rain and sandstorm)
•
Do not use Cruise Control when
towing a trailer.
7-76
07
SMART CRUISE CONTROL (SCC) (IF EQUIPPED)
Smart Cruise Control is designed to
Detecting sensor
help detect the vehicle ahead and
help maintain the desired speed and
minimum distance between the vehicle
ahead.
Overtaking Acceleration Assist
While Smart Cruise Control is operating,
if the function judges that the driver is
determined to overtake the vehicle in
front, acceleration will be assisted.
ONX4E050146
ONX4070005
[1] : Front view camera,
[2] : Front radar
The front view camera and front radar
are used as a detecting sensor to help
detect the vehicles in front.
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Always keep the front view camera
and front radar in good condition to
maintain optimal performance of Smart
Cruise Control.
For more details on the precautions of
the front view camera and front radar,
refer to “Forward Collision-Avoidance
Assist (FCA)” section in chapter 7.
7-77
Driver assistance system
Smart Cruise Control Settings
Setting features
OCN7060069
To set vehicle distance
Each time the button is pressed, the
ONX4070032
vehicle distance changes as follows:
To turn on the Smart Cruise Control
•
Press the Driving Assist (
) button
Distance 4
Distance 3
Distance 2
to turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster.
Distance 1
•
If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
Information
the speed may decrease to maintain
• If you drive at 56 mph (90km/h), the
the distance to the vehicle ahead. If
distance is maintained as follows:
the vehicle ahead accelerates, your
Distance 4 -
vehicle will travel at a steady cruising
approximately 172 ft. (53 m)
speed after accelerating to the set
speed.
Distance 3 -
approximately 130 ft. (40m)
Distance 2 -
Information
approximately 106 ft. (30m)
•
If your vehicle speed is between 0~20
Distance 1 -
mph (0~30 km/h) when you press the
approximately 82 ft. (25m)
Driving Assist button, the Smart Cruise
• The distance is set to the last set
Control speed will be set to 20 mph (30
distance when the engine is restarted,
km/h).
or when Smart Cruise Control was
•
The Driving Assist button symbol may
temporarily canceled.
vary depending on your vehicle option.
7-78
07
OCN7060061
OCN7060062
To increase speed
To decrease speed
• Push the + switch up and release it
• Push the - switch down and release it
immediately. The cruising speed will
immediately. The cruising speed will
increase by 1 mph (1 km/h) each time
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.
the switch is operated in this manner.
• Push the + switch up and hold it
• Push the - switch down and hold it
while monitoring the set speed on
while monitoring the set speed on
the cluster. The cruising speed will
the cluster. The cruising speed will
increase by 5 mph or 10 km/h each
decrease by 5 mph or 10 km/h each
time the switch is operated in this
time the switch is operated in this
manner. Release the switch when
manner.
the desired speed is shown, and the
Release the switch at the speed you
vehicle will accelerate to that speed.
want to maintain. You can set the
You can set the speed to 110 mph (100
speed to 20 mph (30 km/h).
km/h).
WARNING
Check the driving condition before
using the + switch. Driving speed may
sharply increase when you push up and
hold the + switch.
7-79
Driver assistance system
WARNING
Check the driving condition before
using the
switch. Driving speed
may sharply increase or decrease when
you press the
switch.
OCN7060120
To temporarily cancel Smart Cruise
Control
Press the
switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
ONX4070032
To turn off Smart Cruise Control
Press the Driving Assist (
) button to
turn Smart Cruise Control off.
Information
If your vehicle is equipped with Manual
Speed Limit Assist, press and hold the
Driving Assist button to turn off Smart
Cruise Control. However, Manual Speed
OCN7060121
Limit Assist will turn on.
To resume Smart Cruise Control
To resume Smart Cruise Control after the
function was canceled, push the +, - or
switch.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the
switch, vehicle speed
will resume to the preset speed.
7-80
07
Based on Drive Mode
Smart Cruise Control will change
acceleration based on the drive mode
selected from Drive Mode Integrated
Control system. Refer to the following
chart.
Drive mode
Smart Cruise Control
COMFORT
Normal
ECO
Slow
OTM070141N
SPORT
Fast
Warning Volume
SMART
Normal
With the engine on, select ‘Driver
(if equipped)
Assistance → Warning Volume’ from the
CUSTOM
Based on selected
Settings menu to change the Warning
(if equipped)
Powertrain mode
Volume to ‘High’, ‘Medium’ or ‘Low’ for
Forward Collision-Avoidance Assist.
If you change the Warning Volume,
Information
the Warning Volume of other Driver
For more details on drive mode, refer to
Assistance systems may change.
“Drive Mode Integrated Control System”
section in chapter 6.
Information
If the engine is restarted, Warning Volume
will maintain the last setting.
7-81
Driver assistance system
Smart Cruise Control Operation
Overtaking Acceleration Assist
Operating conditions
Overtaking Acceleration Assist will
operate when the turn signal indicator
Smart Cruise Control will operate when
is turned on to the left (left-hand drive)
the following conditions are satisfied.
or turned on to the right (right-hand
drive) while Smart Cruise Control is
Basic function
operating, and the following conditions
•
The gear is in D (Drive)
are satisfied:
•
The driver’s door is closed
•
Your vehicle speed is above 40 mph
•
EPB (Electronic Parking Brake) is not
(60 km/h)
applied
•
The hazard warning flasher is off
•
Your vehicle speed is within the
•
A vehicle is detected in front of your
operating speed range
vehicle
--
5~110 mph (10~180 km/h): when
•
Deceleration is not needed to
there is no vehicle in front
maintain distance with the vehicle in
--
0~110 mph (0~180 km/h): when
front
there is a vehicle in front
•
ESC (Electronic Stability Control) or
WARNING
ABS is on
•
When the turn signal indicator is
•
ESC (Electronic Stability Control) or
turned on to the left (left-hand drive)
ABS is not controlling the vehicle
or turned on to the right (right-
•
Engine RPM is not in the red zone
hand drive) while there is a vehicle
ahead, the vehicle may accelerate
•
Forward Collision-Avoidance Assist
brake control is not operating (if
temporarily. Pay attention to the
road conditions at all times.
equipped)
•
Remote Smart Parking Assist brake
•
Regardless of your countries driving
control is not operating
direction, Overtaking Acceleration
Assist will operate when the
conditions are satisfied. When
Information
using the function in countries with
different driving direction, always
At a stop, if there is no vehicle in front of
check the road conditions at all
your vehicle, Smart Cruise Control will
times.
turn on when the brake pedal is depressed.
7-82
07
Smart Cruise Control Display and
Control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist mode on the cluster. Refer to “LCD
Display Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
OTM070155E
• When temporarily canceled
(1)
indicator is displayed.
(2) The previous set speed is shaded.
Information
• The distance of the front vehicle on the
cluster is displayed according to the
actual distance between your vehicle
and the vehicle ahead.
OTM070245E
• The target distance may vary according
• When operating
to the vehicle speed and the set
distance level. If vehicle speed is low,
(1) Whether there is a vehicle ahead
even though the vehicle distance have
and the selected distance level are
changed, the change of the target
displayed.
vehicle distance may be small.
(2) Set speed is displayed.
(3) Whether there is a vehicle ahead
and the target vehicle distance are
displayed.
7-83
Driver assistance system
To temporarily accelerate
Smart Cruise Control temporarily
canceled
ONX4070090N
ONX4070034N
OTM070113N
If you press the accelerator pedal above
Smart Cruise Control will be temporarily
a certain speed while Smart Cruise
canceled automatically when:
Control is operating, the vehicle can be
speeded up temporarily without altering
• The vehicle speed is above 120 mph
the set speed. The set speed, distance
(190 km/h)
level and target distance will blink on the
• The vehicle is stopped for a certain
cluster while pressing the accelerator
period of time
pedal above a certain speed. However,
• The accelerator pedal is continuously
the vehicle speed may be decreased
depressed for a certain period of time
when the pressing intensity is not
enough.
• The conditions for the Smart Cruise
Control to operate is not satisfied
If Smart Cruise Control is temporarily
WARNING
canceled automatically, the ‘Smart
Be careful when accelerating
Cruise Control canceled’ warning
temporarily, because the speed and
message will appear on the cluster, and
distance is not controlled automatically
an audible warning will sound to warn
even if there is a vehicle in front of you.
the driver.
If Smart Cruise Control is temporarily
canceled while the vehicle is at a
standstill with the function activated,
EPB (Electronic Parking Brake) maybe
applied.
WARNING
When Smart Cruise Control is
temporarily canceled, distance with the
front vehicle will not be maintained.
Always have your eyes on the road
while driving, and if necessary, depress
the brake pedal to reduce your driving
speed in order to maintain a safe
distance.
7-84
07
Smart Cruise Control conditions not
In traffic situation
satisfied
OTM070114L
OTM070112N
In traffic, your vehicle will stop if the
If the Driving Assist button, + switch,
vehicle ahead of you stops. Also, if the
- switch or
switch is pushed when
vehicle ahead of you starts moving, your
Smart Cruise Control’s operating
vehicle will start as well. In addition, after
conditions are not satisfied, the ‘Smart
the vehicle has stopped and a certain
Cruise Control conditions not met’ will
time have passed, the ‘Use switch or
appear on the cluster, and an audible
pedal to accelerate’ message will appear
warning will sound.
on the cluster. Depress the accelerator
pedal or push the + switch, - switch or
switch to start driving.
WARNING
While the message is displayed on the
cluster, if there is no vehicle in front or
the vehicle is far away from you, and
the + switch, - switch or
switch
is pushed, Smart Cruise Control will
automatically cancel and EPB will be
applied. However, if the accelerator
pedal is depressed, EPB will not be
applied even though the function is
canceled. Always pay attention to the
road condition ahead.
7-85
Driver assistance system
Warning road conditions ahead
Collision Warning
ONX4E070035
ONX4E070001
In the following situation, the ‘Watch for
While Smart Cruise Control is operating,
surrounding vehicles’ warning message
when the collision risk with the vehicle
will appear on the cluster, and an audible
ahead is high, the ‘Collision Warning’
warning will sound to warn the driver of
warning message will appear on the
road conditions ahead.
cluster, and an audible warning will
sound to warn the driver. Always have
--
The vehicle in front disappears when
Smart Cruise Control is maintaining
your eyes on the road while driving, and
if necessary, depress the brake pedal to
the distance with the vehicle ahead
while driving below a certain speed.
reduce your driving speed in order to
maintain a safe distance.
--
While the ‘Use switch or pedal to
accelerate’ message is displayed on
the cluster, if there is no vehicle in
WARNING
front or the vehicle is far away from
In the following situations, Smart Cruise
you, and the + switch, - switch or
Control may not warn the driver of a
switch is pushed.
collision.
--
The distance from the front vehicle
WARNING
is near, or the vehicle speed of the
front vehicle is faster or similar with
Always pay attention to vehicles or
your vehicle
objects that may suddenly appear in
front of you, and if necessary, depress
--
The speed of the front vehicle is very
the brake pedal to reduce your driving
slow or is at a standstill
speed in order to maintain a safe
--
The accelerator pedal is depressed
distance.
right after Smart Cruise Control is
turned on
7-86
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст