Hyundai Tiburon (2003 year). Manual — part 139
Measure the resistance.
RESISTANCE-TEMP. CHARACTERISIC TABLE
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Air conditioning
System > Ambient sensor > Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC >
Heating,Ventilation, Air Conditioning > Air conditioning System > Ambient sensor > Repair procedures
INSPECTION
Temp (°C)
Rmin (k
Ω
)
R (k
Ω
)
Rmax (k
Ω
)
-20
261.090
271.120
281.150
0
92.617
95.089
97.656
25
29.550
30.000
30.450
50
10.676
10.950
11.224
80
3.964
3.828
3.366
CHARACTERISTICS
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Air conditioning
System > A.Q.S (Air Quality Sensor) > Schematic Diagrams, TIBURON(GK) > 2003 > G 2.7 V6 DOHC >
Heating,Ventilation, Air Conditioning > Air conditioning System > A.Q.S (Air Quality Sensor) >
Schematic Diagrams
CONNECTOR
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Air conditioning
System > A.Q.S (Air Quality Sensor) > Description and Operation, TIBURON(GK) > 2003 > G 2.7 V6
DOHC > Heating,Ventilation, Air Conditioning > Air conditioning System > A.Q.S (Air Quality Sensor) >
Description and Operation
DESCRIPTION
1. The A.Q.S. sensor, located at the center support in front of the engine radiator, detects hazardous elements in
ambient air and provides output signals to the control module.
2. It will detect sulfurous acid gas, carbon dioxide, carbon monoxide, hydrocarbon and allergen.
3. Sensitivity of used gas sensor
A. Sensitivity at NO2 0.3PPM : more than 2.8
B. Sensitivity at gasoline 10PPM : less than 0.45
4. Delay time
SENSOR OUTPUT
A. ON time (on) : 5sec.
B. OFF time (off) : 0sec.
Condition
Resistance
Normal condition
5V
Hazardous gas detection
0V
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Air conditioning
System > A.Q.S (Air Quality Sensor) > Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC >
Heating,Ventilation, Air Conditioning > Air conditioning System > A.Q.S (Air Quality Sensor) > Repair
procedures
INSPECTION
CHECKING METHOD OF GAS DETECTING BENCH
1. Put the sensor part of AQS toward the air inflow (intake) direction.
2. Connect all of the power supply line and output line to AQS.
3. Close the chamber lid after putting the lines in order.
4. Connect the air outlet part of vacuum pump with the air inlet door of chamber by using air hose.
5. Turn on the power of vacuum pump.
6. Supply the power to the AQS. (DC 12V)
7. LED of AQS is kept "ON" for the first 35 ± 2 seconds after supplying the power.
8. Wait until all of the LEDs are "OFF". Put the diesel engine exhaust gas into the chamber. Then check the
LEDs of number 1 to 10 are "ON".
9. After check LEDs are "ON". Put the clean air into the chamber. Then check LEDs are "OFF".
10. Wait until all of the LEDs are "OFF".
11. And then put the gasoline engine exhaust gas into the chamber, then check the LEDs of number 1 to 10 are
"ON".
12. After check LEDs are "ON". Put the clean air into the chamber. Then check LEDs are "OFF".
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст