Hyundai Tiburon (2003 year). Manual — part 187

Be careful not to remove more adhesive than nesessary, and also not to damage the paintwork on the
body surface with the knife. If the paintwork is damaged, repair the damage area with touch-up paint.

2. Clean the body flange surface of quarter fixed glass flange with a sponge dampened in isopropyl alchol.

A. Clean completely the contaminats such as oil and dust in the primer-applied part of body flange.

B. After cleaning body flange surface, pass a minute or more then, apply the body primer to body flange.

3. Apply the body primer to body flange surface of quarter fixed glass.

A. To use the body primer, shake the vessel enough.

4. Apply the glass primer to the glass and the glass moulding assembly.

5. Apply the sealant to the entire circumferenco of the quarter fixed glass.

Install the glass to the body within five minutes.

6. Install the guarter fixed glass.

7. Install the removed parts.

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Bumper > front bumper > Components
and Components Location, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Bumper >
front bumper > Components and Components Location

COMPONENTS

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Bumper > front bumper > Repair
procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Bumper > front
bumper > Repair procedures

REMOVAL AND INSTALLATION

1. Remove the front bumper upper cover.

2. Loosen the head lamp mounting bolts, disconnect the connector, and remove the head lamp assembly.

3. Disconnect the fog lamp connectors.

4. Remove the front bumper upper mounting bolt and screws.

Tightening torque:
4~6 Nm (40~60 kg·cm, 2.9~4.4 lb·ft)

5. Remove the mounting screws in the corner of front bumper.