Hyundai Tiburon (2003 year). Manual — part 22
Thin or diluted engine oil
Oil relief valve stuck (open)
Excessive bearing clearance
Change and find out cause
Repair
Replace
High oil pressure
Oil relief valve stuck (closed)
Repair or replace
Excessive engine rolling and
vibration
Misfire
Loose engine roll stopper (front, rear)
Loose transaxle mount bracket
Loose center member
Broken transaxle mount insulator
Broken engine mount insulator
Broken engine roll stopper insulator
Correct
Re-tighten
Re-tighten
Re-tighten
Re-tighten
Replace
Repalce or repalce
Low coolant level
Leakage of coolant
Damaged radiator core joint
Corroded or cracked hoses (Radiator hose,
heater hose, etc.)
Faulty radiator cap valve or setting or
spring
Faulty thermostat
Faulty engine coolant pump
Correct
Replac
Replace
Replace
Repacle
Repalce
Clogged radiator
Foreign material in coolant
Replace
Abnormally high coolant
temperature
Faulty thermostat
Faulty radiator cap
Restriction of flow in cooling system
Loose or missing drive belt
Faulty engine coolant pump
Faulty thermostat seder or wiring
Faulty electric fan
Faulty thermo-sensor on radiator
Insufficient coolant
Replace parts
Replace
Clear restriction or replace parts
Adjust or replace
Replace
Repair or repalce
Repair or replace
Replace
Refill coolant
Abnormally low coolant
temperature
Faulty thermostat
Faulty temperature gauge or wiring
Replace
Repair or replace
Leakage from oil cooling system Loose hose and pipe connection
Blocked or collapsed hose and pipe
Replace
Repair or replace
Inoperative electrical cooling fan Damaged
Loose pipe or in operative sensor
Replace or repair
Repair or replace
Exhaust gas leakage
Loose connections
Broken pipe or muffler
Re-tighten
Repair or replace
Abnormal noise
Detached baffler plate in muffler
Broken rubber hanger
Pipe or muffler contacting vehicle body
Broken pipe or muffler
Replace
Replace
Correct
Repair or replace
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Mechanical System > Timing System > Timing Belt >
Components and Components Location, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Mechanical System >
Timing System > Timing Belt > Components and Components Location
COMPONENTS
Timing belt
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Mechanical System > Timing System > Timing Belt >
Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Mechanical System > Timing
System > Timing Belt > Repair procedures
REMOVAL
1. Remove the engine cover.
2. Using a [16 mm], rotate the tensioner arm clockwise (about 14° )and remove the belt from the pulley.
3. Remove the power steering pump pulley, idler pulley, tensioner pulley and crankshaft pulley.
4. Remove the upper and lower timing belt covers.
5. Remove the auto tensioner.
Rotate the crankshaft clockwise and align the timing mark to set the No.1 cylinder's piston to TDC
(compression stroke).
At this time, the timing marks of the camshaft sprocket and cylinder head cover should coincide with each
other.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст