Hyundai Tiburon (2003 year). Manual — part 65
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Troubleshooting,
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Troubleshooting
TROUBLESHOOTING
Symptom
Possible cause
Remedy
Vehicle pulls to one side
Galling of drive shaft ball joint
Wear, rattle or galling of wheel bearing
Defective front suspension and steering
Replace
Replace
Adjust or replace
Vibration
Wear, damage or bending of drive shaft
Drive shaft rattle and hub serration
Wear, rattle or scratching of wheel bearing
Replace
Replace
Replace
Shimmy
Improper wheel balance
Defective front suspension and steering
Adjust or replace
Adjust or replace
Excesive noise
Wear, damage or bent drive shaft
Drive shaft rattle and hub serration
Drive shaft rattle and side gear serration
Wear, rattle or galling of wheel bearing
Loose hub nut
Defective front suspension and steering
Replace
Replace
Replace
Replace
Adjust or replace
Adjust or replace
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Specifications,
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Specifications
SPECIFICATIONS
Driveshaft
Joint type
2.0L M/T
2.0L A/T
2.0L 6M/T
2.7L
Outer
B.J.
B.J.
B.J.
B.J.
Inner
D.O.J.
T.J.
T.J.
T.J.
Maximum permissible joint angle
B.J.
46° or more
45.8° or
more
46° or more
46.5° or
more
D.O.J.
22° or more
T.J.
23° or more 23° or more 23° or more
Hub end play mm(in.)
0.008 (0.0003) or less
Wheel bearing starting torque
Nm (kg·cm, lbf·ft)
1.8 (18, 1.33) or less
B. J. : Birfield joint
D.O.J. : Double offset joint
T. J. : Tripod joint
M/T : 5 Speed Manual transaxle
6M/T : 6 Speed Manual transaxle
A/T : Automatic transaxle
TIGHTENING TORQUE
Nm
Kgf·cm
lbf·ft
Driveshaft nut
2.0L
2.7L
200 ~ 260
200 ~ 280
2000 ~ 2600
2000 ~ 2800
148 ~ 192
148 ~ 207
Knuckle to strut assembly nut
140 ~ 160
1400 ~ 1600
104 ~ 118
Lower arm ball joint to knuckle nut
60 ~ 72
600 ~ 720
44 ~ 53
Tie rod end to knuckle
24 ~ 34
240 ~ 340
18 ~ 25
Front brake caliper to knuckle
69 ~ 85
690 ~ 850
51 ~ 63
Wheel nut
90 ~ 110
900 ~ 1100
66 ~ 81
Rear hub bearing flange nut
200 ~ 260
2000 ~ 2600
148 ~ 192
Rear brake to rear axle carrier mounting
bolt
65 ~ 75
650 ~ 750
48 ~ 56
Rear strut to carrier nut
110 ~ 130
1100 ~ 1300
81 ~ 96
Trailing arm to rear axle carrier mounting
nut
100 ~ 120
1000 ~ 1200
74 ~ 88
Rear suspension arm to rear axle carrier
mounting nut
160 ~ 180
1600 ~ 1800
118 ~ 133
Replace self-locking nuts with new ones after removal.
LUBRICANTS
Items
Recommended
Quantity
Birfield joint + Double offset joint Type driveshaft (For 2.0L M/T)
Birfield joint boot grease
CENTOPLEX 278M/136K
CASMOLY BJ
ROLLUBE BJ
Sunlight SW-2
115 ± 6gr.
Double offset joint boot greasE
AMBLYGON TA 10/2A
CASMOLY DOJ
DURALUBE DOJ
Variant SD-R2
100 ± 6gr.
Birfield joint +Tripod joint Type driveshaft (For 2.0L A/T, 2.0L 6M/T)
Birfield joint boot grease
CENTOPLEX 278M/136K
CASMOLY BJ
ROLLUBE BJ
Sunlight SW-2
110 ± 6gr.
Tripod joint boot greas
KLK TJ 41-182
CASMOLY TJ
ROLLUBE TJ
Oneluber MK
145 ± 6gr.
Birfield joint + Tripod joint Type driveshaft (For 2.7L)
Birfield joint boot grease
CENTOPLEX 278M/136K
CASMOLY BJ
ROLLUBE BJ
Sunlight SW-2
135 ± 6gr.
Tripod joint boot grease
KLK TJ 41-182
CASMOLY TJ
ROLLUBE TJ
Oneluber MK
145 ± 6gr.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст