Hyundai Kona (2022 year). Manual in english — page 4
Seats & Safety System
SRS care
WARNING
The SRS is virtually maintenance-free
To reduce the risk of serious injury or
and there are no parts you can safely
death take the following precautions:
service by yourself. If the SRS air bag
•
Do not attempt to modify or
warning light does not illuminate when
disconnect the SRS components or
the Engine Start/Stop button is in the
wiring, including the addition of any
ON position, or continuously remains on,
kind of badges to the pad covers or
have the system immediately inspected
modifications to the body structure.
by an authorized HYUNDAI dealer.
•
Do not place objects over or near
We recommend any work on the SRS
the air bag modules on the steering
system, such as removing, installing,
wheel, instrument panel, and the
repairing, or any work on the steering
front passenger’s panel above the
wheel, the front passenger’s panel, front
glove box.
seats and roof rails be performed by an
authorized HYUNDAI dealer. Improper
•
Clean the air bag pad covers with
handling of the SRS system may result in
a soft cloth moistened with plain
serious personal injury.
water. Solvents or cleaners could
adversely affect the air bag covers
and proper deployment of the
system.
•
We recommend that inflated air
bags be replaced by an authorized
HYUNDAI dealer.
•
If components of the air bag system
must be discarded, or if the vehicle
must be scrapped, certain safety
precautions must be observed.
Consult an authorized HYUNDAI
dealer for the necessary information.
Failure to follow these precautions
could increase the risk of personal
injury.
3-60
03
Additional safety precautions
Air bag warning labels
Passengers should not move out of
or change seats while the vehicle is
moving. A passenger who is not wearing
a seat belt during a crash or emergency
stop can be thrown against the inside of
the vehicle, against other occupants, or
be ejected from the vehicle.
Do not use any accessories on seat
belts. Devices claiming to improve
occupant comfort or reposition the seat
belt can reduce the protection provided
by the seat belt and increase the chance
OAD035053N
of serious injury in a crash.
Air bag warning labels, required by the
Do not modify the front seats.
Canadian Motor Vehicle Safety Standards
Modification of the front seats could
(CMVSS), are attached to alert the driver
interfere with the operation of the
and passengers of potential risks of the
supplemental restraint system sensing
air bag system. Be sure to read all of the
components or side air bags.
information about the air bags that are
installed on your vehicle in this Owners
Do not place items under the front
Manual.
seats. Placing items under the front seats
could interfere with the operation of the
supplemental restraint system sensing
components and wiring harnesses.
Do not cause impact to the doors.
Impact to the doors when the Engine
Start/Stop button is in the ON or START
position may cause the air bags to
inflate.
Modifications to accommodate
disabilities. If you are considering
modification of your vehicle due to a
disability, please contact the HYUNDAI
Customer Center at 1-888-216-2626.
Adding equipment to or modifying
your air bag equipped vehicle
If you modify your vehicle by changing
your vehicle’s frame, bumper system,
front end or side sheet metal or ride
height, this may affect the operation of
your vehicle’s air bag system.
3-61
4. Instrument cluster
Instrument cluster
4-4
Instrument cluster control
4-5
Instrument panel illumination
4-5
Gauges and meters
4-5
Speedometer
4-5
Tachometer
4-5
Engine coolant temperature gauge
4-6
Fuel gauge
4-6
Outside temperature gauge
4-7
Odometer
4-7
Distance to empty
4-7
Transmission shift indicator
4-8
Intelligent variable transmission
4-8
Dual clutch transmission shift indicator
4-9
Warning and indicator lights
4-9
Seat belt warning light
4-9
Air bag warning light
4-9
4
Parking brake & Brake fluid warning light
4-10
Anti-lock Brake System (ABS) warning light
4-11
Electronic Brake Force Distribution (EBD) system warning light
4-11
Electric Power Steering (EPS) warning light
4-12
Charging system warning light
4-12
Engine oil pressure warning light
4-12
Low fuel level warning light
4-13
Malfunction Indicator Lamp (MIL)
4-13
Exhaust system (GPF) warning light (for gasoline engine)
4-14
Electronic Parking Brake (EPB) warning light
4-14
AUTO HOLD indicator light
4-15
Low tire pressure warning light
4-15
Forward Safety warning light
4-16
Lane Safety indicator light
4-16
4 Wheel Drive (4WD) warning light
4-16
4 Wheel Drive (4WD) LOCK Indicator Light
4-16
LED headlight warning light
4-17
Electronic Stability Control (ESC) indicator light
4-17
Electronic Stability Control (ESC) OFF indicator light
4-17
Immobilizer Indicator Light (without smart key)
4-18
Immobilizer Indicator Light (with smart key)
4-18
Downhill Brake Control (DBC) indicator light
4-19
AUTO STOP indicator light
4-19
Turn signal indicator light
4-20
High beam indicator light
4-20
High Beam Assist indicator light
4-20
Cruise Indicator Light
4-20
SPORT Mode Indicator Light
4-20
ECO Mode Indicator Light
4-20
SMART Mode Indicator Light
4-21
Master warning light
4-21
LCD display messages
4-21
Shift to P (for smart key system and dual clutch transmission)
4-21
Low key battery (for smart key system)
4-21
Press START button while turning wheel (for smart key system)
4-21
Steering wheel not locked (for smart key system)
4-21
Press brake pedal to start engine
(for smart key system and dual clutch transmission)
4-21
4
Key not in vehicle (for smart key system)
4-22
Key not detected (for smart key system)
4-22
Press START button again (for smart key system)
4-22
Press START button with key (for smart key system)
4-22
Check BRAKE SWITCH fuse
(for smart key system and dual clutch transmission)
4-22
Shift to P or N to start engine
(for smart key system and dual clutch transmission)
4-22
Battery discharging due to external electrical devices
4-22
Door, Hood, Tailgate open indicator
4-23
Sunroof open indicator
4-23
Low tire pressure
4-23
Lights
4-24
4. Instrument cluster
Wiper
4-24
Heated Steering Wheel turned off
4-24
Low washer fluid
4-24
Low fuel
4-24
Engine overheated / Engine has overheated
4-24
Check exhaust system
4-24
Check headlight
4-25
Check turn signal
4-25
Check headlamp LED
4-25
Check Forward Safety system
4-25
Check Lane Keeping Assist (LKA) system
4-25
Check Blind-Spot Safety system
4-25
Check Driver Attention Warning system
4-25
Check High Beam Assist (HBA) system
4-25
Check Smart Cruise Control system
4-25
LCD display
4-26
LCD display control
4-26
4
View modes
4-27
Trip computer mode
4-28
Turn By Turn (TBT) mode
4-28
Driving assist mode
4-28
Master warning group
4-29
User settings mode
4-30
Trip computer (Type A)
4-36
Trip modes
4-36
Trip computer (Type B)
4-38
Trip modes
4-38
Instrument cluster
Instrument cluster
Conventional cluster (Type A)
Full LCD cluster (Type B)
The actual cluster in the vehicle may differ from the illustration.
For more information, refer to “Gauges and meters” section in this chapter.
OOS040015C/ONX4040002
1. Tachometer
4. Fuel gauge
2. Speedometer
5. Warning and indicator lights
3. Engine coolant temperature gauge
6. LCD display (including Trip computer)
4-4
04
Instrument cluster control
Gauges and meters
Instrument panel illumination
Speedometer
Type A
Type B
OOS040120
OOS040001K
OCN7040005
When the vehicle's position lights or
The speedometer indicates the speed of
headlights are on, press the illumination
the vehicle and is calibrated in kilometers
control button to adjust the brightness of
per hour (km/h) and/or miles per hour
the instrument panel illumination.
(MPH).
When pressing the illumination control
Tachometer
button, the interior switch illumination
intensity is also adjusted.
Type A
Type B
WARNING
Never adjust the instrument cluster
while driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
OOS047104L
OCN7040007
The tachometer indicates the
approximate number of engine
revolutions per minute (rpm).
Use the tachometer to select the correct
shift points and to prevent lugging and/
or over-revving the engine.
NOTICE
OCN7040019L
Do not operate the engine within the
• The brightness of the instrument
tachometer's RED ZONE. This may
panel illumination is displayed.
cause severe engine damage.
• If the brightness reaches to the
maximum or minimum level, a chime
will sound.
4-5
Instrument cluster
Engine coolant temperature gauge
Fuel gauge
Type A
Type B
Type A
Type B
OOS047106
OCN7040009
OOS047107
OCN7040011
This gauge indicates the temperature
This gauge indicates the approximate
of the engine coolant when the ignition
amount of fuel remaining in the fuel tank.
switch is in the ON position.
Information
NOTICE
• The fuel tank capacity is given in
If the gauge pointer moves beyond
chapter 2.
the normal range area toward the
• The fuel gauge is supplemented by
“H (Hot) or 130” position, it indicates
a low fuel warning light, which will
overheating that may damage the
illuminate when the fuel tank is nearly
engine.
empty.
Do not continue driving with an
• On inclines or curves, the fuel gauge
overheated engine. If your vehicle
pointer may fluctuate or the low fuel
overheats, refer to “If the Engine
warning light may come on earlier than
Overheats” section in chapter 8.
usual due to the movement of fuel in
the tank.
WARNING
Never remove the engine coolant
WARNING
reservoir cap when the engine is hot.
Running out of fuel can expose vehicle
The engine coolant is under pressure
occupants to danger.
and could cause severe burn. Wait until
the engine is cool before adding coolant
You must stop and obtain additional
to the reservoir.
fuel as soon as possible after the
warning light comes on or when the
gauge indicator comes close to the “E
(Empty) or 0” level.
NOTICE
Avoid driving with an extremely low
fuel level. Running out of fuel could
cause the engine to misfire damaging
the catalytic converter.
4-6
04
Outside temperature gauge
Odometer
Type A
Type B
Type A
Type B
OOS040003K
OCN7040012
OTM040017
OTM040019
The odometer indicates the total
This gauge indicates the current outside
air temperatures by 1°C (1°F).
distance that the vehicle has been
driven and should be used to determine
Note that the temperature indicated
when periodic maintenance should be
on the LCD display may not change
performed.
as quickly as the outside temperature
(there may be a slight delay before the
Distance to empty
temperature changes.)
Type A
Type B
The temperature unit (from °C to °F or
from °F to °C) can be changed by:
- User Settings mode in the Cluster :
You can change the temperature unit
in the “Other Features - Temperature
unit” .
- Automatic climate control system :
While pressing the OFF button, press
the AUTO button for 3 seconds or
more.
The temperature unit of the instrument
OTM040018
OTM040020
cluster and climate control system will
• The distance to empty is the
change at once.
estimated distance the vehicle can be
driven with the remaining fuel.
• If the estimated distance is below 1 km
(1 mi.), the trip computer will display
“---” as distance to empty.
4-7
Instrument cluster
Transmission shift indicator
Information
Intelligent variable transmission
• If the vehicle is not on level ground or
(if equipped)
the battery power has been interrupted,
the distance to empty function may not
Type A
operate correctly.
• The distance to empty may differ
from the actual driving distance as it
is an estimate of the available driving
distance.
• The trip computer may not register
additional fuel if less than 6 liters (1.5
gallon) of fuel are added to the vehicle.
• The distance to empty may vary
significantly based on driving
OTL045132
conditions, driving habits, and
Type B
condition of the vehicle.
OCN7040013
This indicator displays which shift lever
position is selected.
4-8
04
Dual clutch transmission shift
Warning and indicator lights
indicator
Type A
Type B
Information
Make sure that all warning lights are OFF
after starting the engine. If any light is still
ON, this indicates a situation that needs
attention.
Seat belt warning light
This warning light informs the driver that
OTL045132
OCN7040013
the seat belt is not fastened.
This indicator displays which shift lever
For more details, refer to “Seat Belts”
position is selected.
section in chapter 3.
• Park : P
• Reverse : R
Air bag warning light
• Neutral : N
• Drive : D
• Manual shift mode : 1, 2, 3, 4, 5, 6
This warning light illuminates:
• When you turn the ignition switch or
the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 3~6
seconds and then goes off.
• When there is a malfunction with the
SRS.
In this case, have the vehicle
inspected by an authorized HYUNDAI
dealer.
4-9
Instrument cluster
Parking brake & Brake fluid
Dual-diagonal braking system
warning light
Your vehicle is equipped with dual-
diagonal braking system. This means you
This warning light illuminates:
still have braking on two wheels even if
one of the dual systems should fail.
• When you set the ignition switch or
the Engine Start/Stop button to the
With only one of the dual systems
ON position.
working, more than normal pedal travel
and greater pedal pressure is required to
- The parking brake & brake fluid
stop the vehicle.
warning light illuminates for about 3
seconds and will then turn off once
Also, the vehicle will not stop in as short
the parking brake is released.
a distance with only a portion of the
brake system working.
• Whenever the parking brake is
applied.
If the brakes fail while you are driving,
shift to a lower gear for additional engine
• Whenever the brake fluid level in the
braking and stop the vehicle as soon as it
reservoir is low.
is safe to do so.
- If the warning light illuminates
with the parking brake released, it
indicates the brake fluid level in the
WARNING
reservoir is low.
Parking Brake & Brake Fluid warning
light
If the brake fluid level in the reservoir is
Driving the vehicle with a warning light
low:
ON is dangerous. If the Parking Brake
1. Drive carefully to the nearest safe
& Brake Fluid warning light illuminates
location and stop your vehicle.
with the parking brake released, it
2. With the engine stopped, check the
indicates that the brake fluid level is
brake fluid level immediately and add
low.
fluid as required (For more details,
If this occurs, have the vehicle
refer to “Brake Fluid” section in
inspected by an authorized HYUNDAI
chapter 9). After adding brake fluid,
dealer.
check all brake components for fluid
leaks. If a brake fluid leak is found, or
if the warning light remains on, or if
the brakes do not operate properly, do
not drive the vehicle. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
4-10
04
Anti-lock Brake System (ABS)
WARNING
warning light
Electronic Brake Force Distribution
(EBD) system warning light
This warning light illuminates:
When both ABS and Parking Brake &
• When you set the ignition switch or
Brake Fluid warning lights are on, the
the Engine Start/Stop button to the
brake system will not work normally
ON position.
and you may experience an unexpected
- The ABS warning light illuminates
and dangerous situation during sudden
for about 3 seconds and then goes
braking.
off.
If this occurs, avoid high speed driving
• Whenever there is a malfunction with
and abrupt braking.
the ABS.
Have the vehicle inspected by an
Note that the hydraulic braking
authorized HYUNDAI dealer as soon as
system will still be operational even if
possible.
there is a malfunction with the ABS.
If this occurs, have the vehicle
NOTICE
inspected by an authorized HYUNDAI
Electronic Brake Force Distribution
dealer.
(EBD) system warning light
Electronic Brake Force
When the ABS warning light is on
Distribution (EBD) system
or both ABS and Parking Brake &
warning light
Brake Fluid warning lights are on, the
speedometer, odometer, or tripmeter
may not work. Also, the EPS warning
light may illuminate and the steering
effort may increase or decrease.
When the ABS warning and
If this occurs, have the vehicle
Parking Brake warning lights are on
inspected by an authorized HYUNDAI
simultaneously, it may indicate a
dealer as soon as possible.
problem with the Electronic Brake Force
Distribution system.
If this occurs, have the vehicle inspected
by an authorized HYUNDAI dealer.
4-11
Instrument cluster
Electric Power Steering (EPS)
Engine oil pressure warning
warning light
light
This warning light illuminates:
This warning light illuminates:
• When you set the ignition switch or
When the engine oil pressure is low.
the Engine Start/Stop button to the
ON position.
If the engine oil pressure is low:
- The electric power steering warning
1. Drive carefully to the nearest safe
light illuminates for about 3 seconds
location and stop your vehicle.
and then goes off.
2. Turn the engine off and check the
• Whenever there is a malfunction with
engine oil level (For more details,
the electric power steering.
refer to “Engine Oil” section in
If this occurs, have the vehicle
chapter 9). If the level is low, add oil
inspected by an authorized HYUNDAI
as required.
dealer.
If the warning light remains on after
adding oil or if oil is not available, have
Charging system warning
the vehicle inspected by an authorized
light
HYUNDAI dealer as soon as possible.
Continued driving with the warning
This warning light illuminates:
light on may cause engine failure.
When there is a malfunction with either
the alternator or electrical charging
Information
system.
When engine oil pressure decreases due to
insufficient engine oil, etc., the Engine Oil
If there is a malfunction with either the
Pressure warning light will illuminate. In
alternator or electrical charging system:
addition, the enhanced engine protection
1. Drive carefully to the nearest safe
system which restrains engine power
location and stop your vehicle.
will operate. If the engine oil pressure is
2. Turn the engine off and check the
restored, the Engine Oil Pressure warning
alternator drive belt for looseness or
light and the enhanced engine protection
breakage.
system will turn off.
If the belt is adjusted properly, there
may be a problem in the electrical
charging system.
If this occurs, have the vehicle
inspected by an authorized HYUNDAI
dealer as soon as possible.
4-12
04
NOTICE
Malfunction Indicator Lamp
(MIL)
• If the engine does not stop
immediately after the Engine Oil
Pressure warning light is illuminated,
This indicator light illuminates:
severe damage could result.
• When you set the ignition switch or
• If the warning light stays on while the
the Engine Start/Stop button to the
engine is running, it indicates that
ON position.
there may be serious engine damage
- The malfunction indicator light
or malfunction. In this case:
illuminates for about 3 seconds and
1. Stop the vehicle as soon as it is
then goes off.
safe to do so.
• Whenever there is a malfunction with
2. Turn off the engine and check the
either the emission control system or
oil level. If the oil level is low, fill
the engine or the vehicle powertrain.
the engine oil to the proper level.
If this occurs, have the vehicle
3. Start the engine again. If the
inspected by an authorized HYUNDAI
warning light stays on after the
dealer.
engine is started, turn the engine
• If the enhanced engine protection
off immediately. If this occurs,
system becomes activated due to lack
have the vehicle inspected by an
of engine oil, engine power will be
authorized HYUNDAI dealer.
limited. If such condition continues
repeatedly, the Malfunction Indicator
Low fuel level warning light
Lamp will illuminate.
NOTICE
This warning light illuminates:
• Driving with the Malfunction
When the fuel tank is nearly empty.
Indicator Lamp (MIL) on may cause
damage to the emission control
Add fuel as soon as possible.
system which could affect drivability
and/or fuel economy.
NOTICE
• If the enhance engine protection
Driving with the Low Fuel Level warning
system starts operation due to lack
light on or with the fuel level below “E
of engine oil, engine power will be
or 0” can cause the engine to misfire
limited. If such condition continues
and damage the catalytic converter.
repeatedly, the Malfunction Indicator
Lamp will illuminate.
NOTICE
If the Malfunction Indicator Lamp
(MIL) illuminates, potential catalytic
converter damage is possible which
could result in loss of engine power.
If this occurs, have the vehicle
inspected by an authorized HYUNDAI
dealer as soon as possible.
4-13
Instrument cluster
Exhaust system (GPF)
Electronic Parking Brake
warning light (for gasoline
(EPB) warning light
engine, if equipped)
(if equipped)
• This warning light illuminates, when
This warning light illuminates:
accumulated soot reaches a certain
• When you set the ignition switch or
amount.
the Engine Start/Stop button to the
• When this warning light illuminates, it
ON position.
may turn off after driving the vehicle
- The EPB warning light illuminates
at more than 80 km/h (50 mph) for
for about 3 seconds and then goes
about 30 minutes (above 3rd gear
off.
with 1500 ~ 4000 engine rpm).
• Whenever there is a malfunction with
If this warning light blinks in spite
EPB.
of the procedure (at this time LCD
If this occurs, have the vehicle
warning message will be displayed),
inspected by an authorized HYUNDAI
have the GPF system checked by an
dealer.
authorized HYUNDAI dealer.
NOTICE
Information
If you continue to drive with the GPF
The Electronic Parking Brake (EPB)
warning light blinking for a long time,
warning light may illuminate when
the GPF system can be damaged and
the Electronic Stability Control (ESC)
fuel consumption can worsen.
indicator light comes on to indicate that
ESC is not working properly. This does
not indicate malfunction of EPB.
4-14
04
AUTO HOLD indicator light
This warning light remains ON after
blinking for approximately 60 seconds, or
repeatedly blinks ON and OFF in 3 second
intervals:
This indicator light illuminates:
When there is a malfunction with the
•
[White] When you activate Auto Hold
TPMS.
by pressing the AUTO HOLD switch.
If this occurs, have the vehicle inspected
•
[Green] When you stop the vehicle
by an authorized HYUNDAI dealer as
completely by depressing the brake
soon as possible.
pedal with Auto Hold activated.
For more details, refer to “Tire Pressure
•
[Yellow] Whenever there is a
Monitoring System (TPMS)” section in
malfunction with the Auto Hold
chapter 8.
function.
If this occurs, have the vehicle
inspected by an authorized HYUNDAI
WARNING
dealer.
Safe Stopping
For more details, refer to “Electronic
• The TPMS cannot alert you to severe
Parking Brake (EPB)” section in chapter
and sudden tire damage caused by
6.
external factors.
• If you notice any vehicle instability,
Low tire pressure warning
immediately take your foot off the
light
accelerator pedal, apply the brakes
gradually with light force, and slowly
This warning light illuminates:
move to a safe position off the road.
• When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
- The low tire pressure warning light
illuminates for approximately 3
seconds and then goes off.
• When one or more of your tires are
significantly underinflated. (The
location of the underinflated tires are
displayed on the LCD display.)
For more details, refer to “Tire Pressure
Monitoring System (TPMS)” section in
chapter 8.
4-15
Instrument cluster
Forward Safety warning light
4 Wheel Drive (4WD) warning
(if equipped)
light
This warning light illuminates:
This warning light illuminates:
• When you set the ignition switch or
Whenever there is a malfunction with the
the Engine Start/Stop button to the
4WD system.
ON position.
If this occurs, have the vehicle inspected
- The Forward Safety warning light
by an authorized HYUNDAI dealer.
illuminates for approximately 3
For more details, refer to “4 Wheel Drive
seconds and then goes off.
(4WD)” section in chapter 6.
• Whenever there is a malfunction with
Forward Collision-Avoidance Assist.
4 Wheel Drive (4WD) LOCK
If this occurs, have the vehicle inspected
Indicator Light
by an authorized HYUNDAI dealer.
For more details, refer to “Forward
This indicator light illuminates:
Collision-Avoidance Assist (FCA)”
section in chapter 7.
• Once you set the ignition switch or
Engine Start/Stop Button to the ON
Lane Safety indicator light
position.
(if equipped)
- It illuminates for approximately 3
seconds and then goes off.
This indicator light illuminates:
• When you select 4WD Lock mode by
pressing the 4WD LOCK button.
•
[Green] When the function operating
conditions are satisfied.
- The 4WD LOCK mode is to increase
the drive power when driving on
•
[White] When the function operating
wet pavement, snow covered roads
conditions are not satisfied.
and/or off-road.
•
[Yellow] Whenever there is a
malfunction with Lane Keeping Assist.
NOTICE
If this occurs, have the vehicle
inspected by an authorized HYUNDAI
Do not use 4WD LOCK mode on dry
dealer.
paved roads or highway, it can cause
noise, vibration or damage of 4WD
For more details, refer to “Lane Keeping
related parts.
Assist (LKA)” section in chapter 7.
4-16
04
LED headlight warning light
Electronic Stability Control
(if equipped)
(ESC) indicator light
This warning light illuminates:
This indicator light illuminates:
• When you set the ignition switch or
• When you set the ignition switch or
the Engine Start/Stop button to the
the Engine Start/Stop button to the
ON position.
ON position.
- The LED headlight warning light
- The Electronic Stability Control
illuminates for approximately 3
indicator light illuminates for about
seconds and then goes off.
3 seconds and then goes off.
• Whenever there is a malfunction with
• Whenever there is a malfunction with
the LED headlight.
ESC system.
If this occurs, have the vehicle
If this occurs, have the vehicle
inspected by an authorized HYUNDAI
inspected by an authorized HYUNDAI
dealer.
dealer.
This warning light blinks:
This indicator light blinks:
Whenever there is a malfunction with a
While ESC is operating.
LED headlight related part.
For more details, refer to “Electronic
If this occurs, have the vehicle inspected
Stability Control (ESC)” section in
by an authorized HYUNDAI dealer.
chapter 6.
NOTICE
Electronic Stability Control
Continuous driving with the LED
(ESC) OFF indicator light
Headlight warning light on or blinking
(if equipped)
can reduce LED headlight life.
This indicator light illuminates:
• When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
- The ESC OFF indicator light
illuminates for approximately 3
seconds and then goes off.
• When you deactivate ESC system by
pressing the ESC OFF button.
For more details, refer to “Electronic
Stability Control (ESC)” section in
chapter 6.
4-17
Instrument cluster
Immobilizer Indicator Light
This indicator light blinks for a few
(without smart key)
seconds:
• When the smart key is not in the
This indicator light illuminates:
vehicle.
• When the vehicle detects the
- At this time, you cannot start the
immobilizer in the key with the
engine.
ignition switch in the ON position.
This indicator light illuminates for 2
- At this time, you can start the
engine.
seconds and goes off:
• If the smart key is in the vehicle and
- The indicator light goes off after
the Engine Start/Stop button is ON,
starting the engine.
but the vehicle cannot detect the
smart key.
This indicator light blinks:
In this case, have the vehicle
• When there is a malfunction with the
inspected by an authorized HYUNDAI
immobilizer system.
dealer.
In this case, have the vehicle
inspected by an authorized HYUNDAI
This indicator light blinks:
dealer.
• When there is a malfunction with the
Immobilizer Indicator Light
immobilizer system.
(with smart key)
In this case, have the vehicle
inspected by an authorized HYUNDAI
dealer.
This indicator light illuminates for up to
30 seconds:
• When the vehicle detects the smart
key in the vehicle with the Engine
Start/Stop button in the ACC or ON
position.
- At this time, you can start the
engine.
- The indicator light goes off after
starting the engine.
4-18
04
Downhill Brake Control (DBC)
AUTO STOP indicator light
indicator light
This indicator light illuminates:
This indicator light illuminates:
• When you set the ignition switch or
When the engine enters the Idle Stop
the Engine Start/Stop button to the
mode of ISG (Idle Stop and Go) system.
ON position.
When the engine automatically starts,
- The downhill brake control indicator
the AUTO STOP indicator on the cluster
light illuminates for about 3 seconds
Illuminates to white.
and then goes off.
• When you activate the system by
For more details, refer to "ISG (Idle Stop
pressing the DBC button.
and Go) system" section in chapter 6.
This indicator light blinks:
Information
When Downhill Brake Control system is
When the engine automatically starts
operating.
by the ISG system, some warning lights
(ABS, ESC, ESC OFF, EPS or Parking
This indicator light illuminates yellow:
brake warning light) may turn on for a
Whenever there is a malfunction with
few seconds. This happens because of
Downhill Brake Control system.
low battery voltage. It does not mean the
If this occurs, have the vehicle inspected
system has malfunctioned.
by an authorized HYUNDAI dealer.
For more details, refer to "Downhill
Brake Control (DBC)“ section in chapter
6.
4-19
Instrument cluster
Turn signal indicator light
High Beam Assist indicator
light (if equipped)
This indicator light blinks:
This indicator light illuminates:
When you operate the turn signal
When the high-beam is on with the light
indicator stalk.
switch in the AUTO position.
If your vehicle detects oncoming or
If any of the following occur, there may
preceding vehicles, High Beam Assist
be a malfunction with the turn signal
will switch the high beam to low beam
system.
automatically.
- The turn signal indicator light
For more details, refer to “High Beam
illuminates but does not blink
Assist (HBA)” section in chapter 5.
- The turn signal indicator light blinks
rapidly
Cruise Indicator Light
- The turn signal indicator light does not
(if equipped)
illuminate at all
If any of these conditions occur, have
This indicator light illuminates:
the vehicle inspected by an authorized
When the cruise control system is
HYUNDAI dealer.
enabled.
For more details, refer to "Cruise
High beam indicator light
Control (CC)" in chapter 7.
SPORT Mode Indicator Light
This indicator light illuminates:
(if equipped)
• When the headlamps are on and in
the high beam position
This indicator light illuminates
• When the turn signal lever is pulled
When you select "SPORT" mode as drive
into the Flash-to-Pass position.
mode.
For more details, refer to "Drive Mode
Integrated Control System" in chapter
6.
ECO Mode Indicator Light
(if equipped)
This indicator light illuminates
When you select "ECO" mode as drive
mode.
For more details, refer to "Drive Mode
Integrated Control System" in chapter
6.
4-20
04
SMART Mode Indicator Light
LCD display messages
(if equipped)
Shift to P (for smart key system and
dual clutch transmission)
This indicator light illuminates:
This message is displayed if you try to
When you select ''SMART" mode as drive
turn off the vehicle without the gear in
mode.
the P (Park) position.
For more details, refer to "Drive Mode
If this occurs, the Engine Start/Stop
Integrated Control System'' in chapter
button turns to the ACC position.
6.
Low key battery (for smart key
Master warning light
system)
This message is displayed if the battery
of the smart key is discharged while
This warning light illuminates:
changing the Engine Start/Stop button to
the OFF position.
When there is a malfunction in operation
in any of the following systems:
Press START button while turning
- Forward Collision-Avoidance Assist
wheel (for smart key system)
malfunction (if equipped)
This message is displayed if the steering
- Forward Collision-Avoidance Assist
wheel does not unlock normally when
radar blocked (if equipped)
the Engine Start/Stop button is pressed.
- Blind-Spot Collision Warning
You should press the Engine Start/Stop
malfunction (if equipped)
button while turning the steering wheel
- Blind-Spot Collision Warning radar
right and left.
blocked (if equipped)
- LED headlamp malfunction
Steering wheel not locked
(if equipped)
(for smart key system)
- High Beam Assist malfunction
This message is displayed if the steering
(if equipped)
wheel does not lock normally while the
Engine Start/Stop button is pressed to
- Smart Cruise Control with Stop & Go
malfunction (if equipped)
the OFF position.
- Smart Cruise Control with Stop & Go
Press brake pedal to start engine (for
radar blocked (if equipped)
smart key system and dual clutch
- Tire Pressure Monitoring System
transmission)
(TPMS) malfunction
This message is displayed if the Engine
To identify the details of the warning,
Start/Stop button changes to the ACC
look at the LCD display.
position twice by pressing the button
repeatedly without depressing the brake
pedal.
You can start the vehicle by depressing
the brake pedal and then pressing the
Engine Start/Stop button.
4-21
Instrument cluster
Key not in vehicle (for smart key
Check BRAKE SWITCH fuse
system)
(for smart key system and dual
clutch transmission)
This message is displayed if the smart
key is not in the vehicle when you leave
This message is displayed if the brake
the vehicle with the Engine Start/Stop
switch fuse is disconnected.
button in the ON or Start position.
You need to replace the fuse with a new
Always turn off the engine before leaving
one before starting the engine.
your vehicle.
If that is not possible, you can start the
engine by pressing the Engine Start/
Key not detected (for smart key
Stop button for 10 seconds in the ACC
system)
position.
This message is displayed if the smart
key is not detected when you press the
Shift to P or N to start engine
Engine Start/Stop button.
(for smart key system and dual
clutch transmission)
Press START button again (for smart
This message is displayed if you try to
key system)
start the engine in any other position
This message is displayed if you were
except P (Park) or N (Neutral).
unable to start the vehicle when the
Engine Start/Stop button was pressed.
Information
If this occurs, attempt to start the engine
by pressing the Engine Start/ Stop button
You can start the engine with the gear
again.
in N (Neutral). But, for your safety, we
recommend that you start the engine with
If the warning message appears each
the gear shifted to P (Park).
time you press the Engine Start/Stop
button, have the vehicle inspected by an
Battery discharging due to external
authorized HYUNDAI dealer.
electrical devices (if equipped)
Press START button with key
This message is displayed if the 12V
(for smart key system)
battery voltage is weak due to any
non-factory electrical accessories (ex.
This message is displayed if you press
dashboard camera) while parking. Be
the Engine Start/Stop button while the
careful that the battery is not discharged.
warning message “Key not detected” is
displayed.
If the message appears after removing
the non-factory electrical accessories,
At this time, the immobilizer indicator
have the vehicle inspected by an
light blinks.
authorized HYUNDAI dealer.
4-22
04
Door, Hood, Tailgate open indicator
Sunroof open indicator (if equipped)
OOS040004K
OOS047113
This warning is displayed if any door or
This warning is displayed if you turn off
hood or tailgate is left open. The warning
the engine when the sunroof is open.
will indicate which door is open in the
Close the sunroof securely before leaving
display.
your vehicle.
Low tire pressure (if equipped)
CAUTION
Before driving the vehicle, you should
confirm that the door/ hood/tailgate is
fully closed.
Also, check there is no door/hood/
tailgate open warning light or message
displayed on the instrument cluster.
OTM040022L
This warning message is displayed if the
tire pressure is low. The corresponding
tire on the vehicle will be illuminated.
For more details, refer to “Tire Pressure
Monitoring System (TPMS)” section in
chapter 8.
4-23
Instrument cluster
Lights
Heated Steering Wheel turned off
(if equipped)
This message is displayed if you turn off
the heated steering wheel.
For more details, refer to “Heated
Steering Wheel” in chapter 5.
Low washer fluid (if equipped)
This message is displayed if the washer
fluid level in the reservoir is nearly empty.
Have the washer fluid reservoir refilled.
OIK047145L
Low fuel
This indicator displays which exterior
light is selected using the lighting
This message is displayed if the fuel tank
control.
is almost out of fuel.
When this message is displayed, the low
Wiper
fuel level warning light in the cluster will
come on.
It is recommended to look for the nearest
fueling station and refuel as soon as
possible.
Engine overheated / Engine has
overheated (if equipped)
This message is displayed when the
engine coolant temperature is above
120°C (248°F). This means that the
engine is overheated and may be
OJX1049008L
damaged.
This indicator displays which wiper speed
If your vehicle is overheated, refer to
is selected using the wiper control.
“Overheating” section in chapter 8.
Check exhaust system (if equipped)
This message is displayed if there is a
problem with the GPF system. At this
time, the GPF warning light will also
blink. If this occurs, have the GPF system
checked by an authorized HYUNDAI
dealer.
GPF : Gasoline Particulate Filter
For more details, refer to “Warning
lights” in this chapter.
4-24
04
Check headlight (if equipped)
Check Blind-Spot Safety system
(if equipped)
This warning message is displayed if the
headlamps are not operating properly.
This warning message is displayed if
A corresponding bulb may need to be
there is a problem with the Blind-Spot
replaced.
Collision Warning. Have the vehicle
inspected by an authorized HYUNDAI
Make sure to replace the burned out
dealer.
bulb with a new one of the same wattage
rating.
For more details, refer to “Blind-Spot
Collision-Avoidance Assist (BCA)” in
chapter 6.
Check turn signal (if equipped)
This message is displayed if the turn
Check Driver Attention Warning
signal lamps are not operating properly.
system (if equipped)
A lamp may need to be replaced.
This warning message is displayed if
Make sure to replace the burned out
there is a problem with Driver Attention
bulb with a new one of the same wattage
Warning. Have the vehicle inspected by
rating.
an authorized HYUNDAI dealer.
For more details, refer to “Driver
Check headlamp LED (if equipped)
Attention Warning (DAW)” in chapter 6.
This message is displayed if there is a
problem with the LED headlamp. Have
Check High Beam Assist (HBA)
the vehicle inspected by an authorized
system
HYUNDAI dealer.
(if equipped)
Check Forward Safety system
This warning message is displayed if
(if equipped)
there is a problem with the High Beam
Assist. Have the vehicle inspected by an
This warning message is displayed
authorized HYUNDAI dealer.
if there is a problem with Forward
Collision-Avoidance Assist. Have the
For more details, refer to “High Beam
vehicle inspected by an authorized
Assist (HBA)” in chapter 5.
HYUNDAI dealer.
Check Smart Cruise Control system
For more details, refer to “Forward
(if equipped)
Collision-Avoidance Assist (FCA)” in
chapter 6.
This warning message is displayed if
there is a problem with Smart Cruise
Check Lane Keeping Assist (LKA)
Control. Have the vehicle inspected by
system (if equipped)
an authorized HYUNDAI dealer.
This warning message is displayed if
For more details, refer to “Smart Cruise
there is a problem with Lane Keeping
Control (SCC)” in chapter 6.
Assist. Have the vehicle inspected by an
authorized HYUNDAI dealer.
For more details, refer to “Lane Keeping
Assist (LKA)” in chapter 6.
4-25
Instrument cluster
lcD DIsplay
LCD display control
OOS040025N
The LCD display modes can be changed by using the control buttons.
Switch
Function
MODE button for changing modes
,
MOVE switch for changing items
OK
SELECT/RESET button for setting or resetting the selected item
4-26
04
View modes
View modes
Symbol
Explanation
This mode displays the state of :
- Smart Cruise Control
- Highway Driving Assist
- Lane Keeping Assist
Driving Assist
- Driver Attention Warning
For more information, refer to "Smart Cruise Control
(SCC) ", "Highway Driving Assist (HDA) ", "Lane Keeping
Assist (LKA) ”, “Driver Attention Warning (DAW) ” in
chapter 7 and "4 Wheel Drive (4WD)" in chapter 6.
This mode displays driving information such as the
Trip
tripmeter, fuel economy, etc.
Computer
For more details, refer to "Trip Computer" in this chapter.
Turn By Turn
This mode displays the state of the navigation.
(TBT)
In this mode, you can change settings of the doors, lamps,
User Settings
etc.
The Warning mode displays warning messages related to
Warning
the vehicle when one or more systems are not operating
normally.
The information provided may differ depending on which functions are applicable
to your vehicle.
4-27
Instrument cluster
Trip computer mode
Driving Assist mode
OJX1049042L
OOSH049028L
The trip computer mode displays
SCC/HDA/LKA
information related to vehicle driving
This mode displays the state of Smart
parameters including fuel economy,
Cruise Control, Highway Driving Assist
tripmeter information and vehicle speed.
and Lane Keeping Assist.
For more information, refer to "Trip
For more details, refer to each system
Computer" in this chapter.
information in chapter 7.
Turn By Turn (TBT) mode
OIG059288L
OCN7060149
Driver Attention Warning
Turn-by-turn navigation, distance/time
This mode displays the state of Driver
to destination information is displayed
Attention Warning.
when Turn by Turn view is selected.
For more details, refer to “Driver
Attention Warning (DAW)” in chapter 7.
4-28
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст