Hyundai Kona (2022 year). Manual in english — page 5
04
Master warning group
OTM040024
Driving force distribution (4WD)
OIG059097L
This mode displays information related to
This warning light informs the driver the
4WD driving force.
following situations.
If the vehicle is in 4WD lock state, this
- Forward Collision-Avoidance Assist
mode is not displayed.
malfunction (if equipped)
For detailed information, refer to the
- Forward Collision-Avoidance Assist
"Four Wheel Drive" in the chapter 6.
radar blocked (if equipped)
- Blind-Spot Collision Warning
malfunction (if equipped)
- Blind-Spot Collision Warning radar
blocked (if equipped)
- LED headlamp malfunction
(if equipped)
- High Beam Assist malfunction
(if equipped)
- Smart Cruise Control malfunction
(if equipped)
- Smart Cruise Control radar blocked
(if equipped)
- Tire Pressure Monitoring System
(TPMS) malfunction
The Master Warning Light illuminates
if one or more of the above warning
situations occur.
At this time, a Master Warning icon (
)
will appear beside the User Settings icon
(
), on the LCD display.
If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.
4-29
Instrument cluster
Shift to P to edit settings
This warning message illuminates if
you try to select an item from the User
Settings mode while driving.
• Dual clutch transmission.
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
selecting the shift button to P(Park).
OCN7040026L
Quick guide (Help)
Tire Pressure
This mode provides quick guides for the
systems in the User Settings mode.
This mode displays information related to
Tire Pressure.
Select an item, press and hold the OK
button.
For more details, refer to "Tire Pressure
Monitoring System (TPMS)" in chapter
For more details about each system,
8.
refer to this Owner’s Manual.
User settings mode
Information
When the infotainment system is applied,
only the User’s Setting mode on the
infotainment system is supported but the
User’s Setting mode on the instrument
cluster is not supported.
OTM040060L
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver Assistance
2. Head-up display
3. Cluster
4. Lights
5. Door
6. Convenience
7. Units
The information provided may differ
depending on which functions are
applicable to your vehicle.
4-30
04
1. Driver Assistance
Items
Explanation
To adjust the sensitivity of the Smart Cruise Control.
SCC
• Fast/Normal/Slow
Reaction
For more details, refer to ''Smart Cruise Control (SCC)'' in chapter 7.
• Highway Driving Assist
To activate or deactivate the Highway Driving Assist.
For more details, refer to "Highway Driving Assist (HDA)" in chapter 7.
Driving
Convenience
• Auto Highway Speed Control
To activate or deactivate the Auto Highway Speed Control.
For more details, refer to "Navigation-based Smart Cruise Control
(NSCC)" in chapter 7.
Warning
To adjust the warning timing of the driver assistance system.
Timing
• Normal / Late
Warning
To adjust the warning volume of the driver assistance system.
Volume
• High / Medium / Low
• Leading vehicle departure alert
Driver
To activate or deactivate the Leading vehicle departure alert.
Attention
• Inattentive Driving Warning
Warning
To alert the driver's inattentive driving.
For more details, refer to "Driver attention Warning (DAW)" in chapter 7.
To adjust the Forward Collision-Avoidance Assist (FCA)
• Active Assist
Forward
• Warning Only
safety
• Off
For more details, refer to "Forward Collision-Avoidance Assist (FCA)" in
chapter 7.
To adjust the Lane Keeping Assist (LKA) function.
• Assist
Lane safety
• Warning Only
• Off
For more details, refer to "Lane Keeping Assist (LKA)" in chapter 7.
4-31
Instrument cluster
Items
Explanation
• Safe Exit Warning (SEW)
To activate or deactivate Safe Exit Warning
For more details, refer to "Safe Exit Warning (SEW)" in chapter 7.
• Active Assist
Blind-Spot
safety
• Warning Only
• Off
To activate or deactivate Blind-Spot Collision-Avoidance Assist.
For more details, refer to “Blind-Spot Collision-Avoidance Assist (BCA)” in
chapter 7.
• Parking Distance Warning Auto On
To activate or deactivate the Parking Distance Warning Auto On.
For more details, refer to the "Forward/Reverse Parking Distance
Warning (PDW)" in chapter 7.
Parking
Safety
• Rear Cross-Traffic Safety
To activate or deactivate the Rear Cross-Traffic Safety.
For more details, refer to the "Rear Cross-Traffic Collision-Avoidance
Assist (RCCA)" in chapter 7.
2.
Head-Up Display (if equipped)
Items
Explanation
Enable
Head-up
If this item is checked, Head-Up Display will be activated.
display
Display
To adjust the height of the image displayed.
Height
Rotation
To adjust the angle of the image displayed.
Brightness
To adjust the brightness of the image displayed.
Content
To select the content to be displayed.
Selection
4-32
04
3. Cluster
Items
Explanation
• At vehicle start
Reset fuel
• After refueling
economy
• Manually
(if equipped)
To reset the fuel economy displayed.
To activate or deactivate the Wiper/ Light mode.
Wiper/Lights
When activated, the LCD display shows the selected Wiper/Light mode
Display
whenever you changed the mode.
Traffic Signs
To set the traffic signs displayed.
Icy Road
To activate or deactivate the icy road warning.
Warning
Cluster Voice
To adjust the cluster voice guidance volume.
Guidance
• Level 0 ~ 3
Volume
Welcome
To activate or deactivate the welcome sound.
Sound
Theme
You can select the theme of the cluster.
Selection
4. Lights
Items
Explanation
To adjust the illumination level.
Illumination
• Level 1~20
• Off : The one touch turn signal function will be deactivated.
One Touch
• 3, 5, 7 Flashes : The turn signal indicator will blink 3, 5, or 7 times when
Turn Signal
the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight
To activate or deactivate the headlamp delay function.
Delay
For more details, refer to "Lighting" in chapter 5.
Footwell
To activate or deactivate the Footwell Light function.
Light
To activate or deactivate the traffic change function.
Travel Mode
For more details, refer to "Lighting" in chapter 5.
High Beam
To activate or deactivate High Beam Assist function.
Assist
For more details, refer to "High Beam Assist (HBA)" in chapter 5.
4-33
Instrument cluster
5. Door
Items
Explanation
• Enable on Shift : All doors will be automatically locked if the shift button
is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D
(Drive) position. (only when the engine is running.)
Automatically
Lock
• Enable on Speed : All doors will be automatically locked when the vehicle
speed exceeds 15km/h (9.3mph).
• Off : The auto door lock operation will be deactivated.
• On Shift to P: All doors will be automatically unlocked if the shift button is
shifted to the P (Park) position. (only when the engine is running.)
Automatically
• On key out/On vehicle off : All doors will be automatically unlocked when
Unlock
the ignition key is removed from the ignition switch or the Engine Start/
Stop button is set to the OFF position.
• Off : The auto door unlock operation will be canceled.
• Off: The two press unlock function will be deactivated. Therefore, all
doors will unlock if the door unlock button is pressed.
Two Press
• On: Only the driver’s door will unlock if the door unlock button is pressed.
Unlock
When the door unlock button is pressed again within 4 seconds, the
remaining doors will unlock.
To activate or deactivate the horn feedback.
If the horn feedback is activated, after locking the door by pressing the lock
Horn
button on the remote key, and pressing it again within 4 seconds, the horn
Feedback
feedback sound will operate once to indicate that all doors are locked (if
equipped with remote key).
4-34
04
6. Convenience
Items
Explanation
Rear
To activate or deactivate the Rear Occupant Alert.
Occupant
For more details, refer to "Rear Occupant Alert (ROA) system" in chapter
Alert
5.
• On door unlock : The side view mirrors are unfolded and the welcome
light turns on automatically when the doors are unlocked.
Welcome
• On driver approach : The side view mirrors are unfolded and the welcome
Mirror/Light
light turns on automatically when the vehicle is approached with the
smart key.
For more details, refer to ''Welcome System'' in chapter 5."
Wireless
To activate or deactivate the wireless charging system in the front seat.
Charging
For more details, refer to "Wireless cellular phone charging system" in
System
chapter 5.
To activate or deactivate the Auto Rear Wiper function.
Auto Rear
If you move the shift button from D to R when the front wiper operates, the
Wiper (in R)
rear wiper will operate automatically. Then, if you move the shift button
from R to D, the rear wiper will stop."
• Service Interval
To activate or deactivate the service interval function.
• Adjust Interval
Service
If the service interval menu is activated, you may adjust the time and
Interval
distance.
• Reset
To reset the service interval.
7. Units
Items
Explanation
Speed Unit
To select the speed unit. (km/h, MPH)
Temperature
To select the temperature unit. (°C,°F)
Unit
Fuel
Economy
To select the fuel economy unit. (km/L, L/100km, MPG)
Unit
Tire Pressure
To select the tire pressure unit. (psi, kPa, bar)
Unit
4-35
Instrument cluster
Trip computer (Type A)
The trip computer is a microcomputer-
controlled driver information system that
displays information related to driving.
Information
Some driving information stored in the
trip computer (for example Average
Vehicle Speed) resets if the battery is
disconnected.
OOSH049025L
To change the trip mode, toggle the
Trip modes
"
,
" switch on the steering wheel
Drive Info
• Trip distance
• Average Fuel Economy
• Instant Fuel Economy
Accumulated Info
• Trip distance
• Average Fuel Economy
• Instant Fuel Economy
OTM040063L
Drive info
Trip distance (1), average fuel economy
(2), and instant fuel economy (3) are
Auto Stop (if eqquipped)
displayed.
The information is combined for each
ignition cycle. However, when the engine
Digital speedometer
has been OFF for 3 minutes or longer the
Drive Info screen will reset.
To reset manually, press the OK switch
on the steering wheel for more than 1
second when ‘Drive Info’ is displayed.
4-36
04
OTM040067L
OTM040045
Accumulated info
Digital speedometer
Accumulated trip distance (1), average
Digital speedometer display shows the
fuel economy (2), and instant fuel
speed of the vehicle.
economy (3) are displayed.
The information is accumulated starting
from the last reset.
To reset manually, press the OK switch
on the steering wheel for more than
1 second when ‘Accumulated Info’ is
displayed.
OJX1069044
Auto stop (if equipped)
AUTO STOP display shows the elapsed
time of engine stop by Idle Stop and Go
system.
For more details, refer to “Idle Stop and
Go (ISG)” section in chapter 6.
4-37
Instrument cluster
Trip computer (Type B)
The trip computer is a microcomputer-
controlled driver information system that
displays information related to driving.
Information
Some driving information stored in the
trip computer (for example Average
Vehicle Speed) resets if the battery is
disconnected.
OOSH049025L
To change the trip mode, toggle the
Trip modes
"
,
" switch on the steering wheel
Drive Info
• Trip distance
• Average Fuel Economy
• Elapsed time
Since refueling
• Trip distance
• Average Fuel Economy
• Elapsed time
OJX1049011L
Drive info
Trip distance (1), average fuel economy
(2), and total driving time (3) are
Accumulated Info
displayed.
• Trip distance
The information is combined for each
• Average Fuel Economy
ignition cycle. However, when the engine
• Elapsed time
has been OFF for 3 minutes or longer the
Drive Info screen will reset.
To reset manually, press the OK switch
on the steering wheel for more than 1
Auto Stop (if eqquipped)
second when ‘Drive Info’ is displayed.
Digital speedometer
4-38
04
OJX1049013L
OJX1069044
Since refuel(l)ing
Auto stop (if equipped)
Trip distance (1), average fuel economy
AUTO STOP display shows the elapsed
(2), and total driving time (3) after the
time of engine stop by Idle Stop and Go
vehicle has been refueled are displayed.
system.
To reset manually, press the OK switch
For more details, refer to “Idle Stop and
on the steering wheel for more than
Go (ISG)” section in chapter 6.
1 second when ‘Since Refueling’ is
displayed.
OTM040069L
Digital speedometer
OJX1049012L
Digital speedometer display shows the
Accumulated info
speed of the vehicle.
Accumulated trip distance (1), average
fuel economy (2), and total driving time
(3) are displayed.
The information is accumulated starting
from the last reset.
To reset manually, press the OK switch
on the steering wheel for more than
1 second when ‘Accumulated Info’ is
displayed.
4-39
5. Convenient features
Accessing your vehicle
5-4
Remote key
5-4
Smart key
5-7
Immobilizer system
5-13
Door locks
5-15
Operating door locks from outside the vehicle
5-15
Operating door locks from inside the vehicle
5-16
Auto door lock/unlock features
5-18
Child-protector rear door locks
5-18
Rear Occupant Alert (ROA)
5-19
Theft-alarm system
5-20
Steering wheel
5-21
Electric Power Steering (EPS)
5-21
Tilt / telescopic steering
5-22
Heated steering wheel
5-23
Horn
5-23
Mirrors
5-24
Inside rearview mirror
5-24
Side view mirrors
5-35
5
Windows
5-38
Power windows
5-39
Sunroof
5-42
Sunshade
5-42
Tilt open/close
5-43
Slide open/close
5-43
Resetting the sunroof
5-45
Sunroof open warning
5-45
Exterior features
5-46
Hood
5-46
Tailgate
5-47
Fuel filler door
5-49
Head-Up Display (HUD)
5-52
Head-Up Display on/off
5-52
Head-Up Display information
5-52
Head-Up Display setting
5-53
Precautions while using the Head-Up Display
5-53
Lighting
5-54
Exterior lights
5-54
Interior lights
5-58
Welcome system
5-60
High Beam Assist (HBA)
5-61
High beam assist setting
5-61
Operating condition
5-61
High beam assist malfunction
5-62
Wipers and washers
5-64
Windshield wipers
5-64
Front windshield washers
5-66
Rear window wiper and washer
5-67
Manual climate control system
5-68
Heating and air conditioning
5-69
System operation
5-72
System maintenance
5-74
Automatic climate control system
5-76
Automatic heating and air conditioning
5-77
Manual heating and air conditioning
5-77
5
System operation
5-81
System maintenance
5-83
Windshield defrosting and defogging
5-85
Manual climate control system
5-85
Automatic climate control system
5-86
Auto defogging system (only for automatic climate control system)
5-87
Defroster
5-88
Climate control additional features
5-89
Automatic ventilation
5-89
Sunroof inside air recirculation
5-89
Inside air circulation while operating the washer fluid
5-89
5. Convenient features
Storage compartment
5-90
Center console storage
5-90
Glove box
5-90
Sunglass holder
5-91
Multi box
5-91
Luggage tray
5-92
Interior features
5-93
Cup holder
5-93
Sunvisor
5-94
Power outlet
5-94
USB charger
5-95
Wireless smart phone charging system
5-96
Clock
5-98
Clothes hanger
5-98
Floor mat anchor(s)
5-99
Luggage net holder
5-100
Cargo area cover
5-100
Exterior features
5-101
Roof side rails
5-101
Infotainment system
5-102
5
USB and ipod® port
5-102
Antenna
5-102
Steering wheel remote controls
5-103
Bluetooth® wireless technology
5-104
Voice recognition
5-104
Audio / Video / Navigation system (AVN)
5-104
How vehicle radio works
5-105
Infotainment system specifications
5-108
USB
5-108
Bluetooth
5-109
Trademarks
5-109
Convenient features
Accessing your vehicle
Remote key (if equipped)
Unlocking
To unlock:
1. Press the Door Unlock button (2) on
the remote key.
2. The doors will unlock. The hazard
warning lights will blink two times.
Two press unlock setting:
If you press the Door Unlock button
on the remote key again within
four seconds, then all the doors will
OOS050035N
unlock.
Your HYUNDAI uses a remote key, which
Two press unlock setting can be
you can use to lock or unlock the driver
changed according to owner’s
and passenger doors or the tailgate.
preference in the cluster User Settings
1. Door Lock
mode or with the remote key.
2. Door Unlock
• User settings mode method:
3. Panic
Select or deselect the ‘Two Press
Unlock’ feature in the User Settings
Locking
mode on the cluster LCD display
To lock :
(User Settings Þ Door Þ Two Press
Unlock).
1. Close all doors, engine hood and
tailgate.
• Remote key method:
2. Press the Door Lock button (1) on the
Press and hold both Door Lock (1)
remote key.
and Door Unlock (2) buttons at the
same time until the hazard warning
3. If the Door Lock button (1) is pressed
lights blink.
once more within four seconds, the
horn will beep once and the hazard
Now all doors will unlock when the
warning lights will blink.
Door Unlock button is pressed one
time. To change the setting back,
4. Make sure the doors are locked by
repeat this procedure.
checking the position of the door lock
button inside the vehicle.
Information
WARNING
After unlocking the doors, the doors will
automatically relock after 30 seconds
Do not leave the keys in your
unless a door is opened.
vehicle with unsupervised children.
Unattended children could place the
key in the ignition switch and may
operate power windows or other
controls, or even make the vehicle
move, which could result in serious
injury or death.
5-4
05
Panic button (if equipped)
Mechanical key
Press and hold the Panic button (3) for
more than one second. The horn sounds
and hazard warning lights flash for about
30 seconds.
To cancel the panic mode, press any
button on the remote key.
Information
The word “HOLD” is written on the
button to inform you that you must press
and hold the button for more than one
OOS050036N
second.
If the remote key does not operate
normally, you can lock or unlock the door
Start-up
by using the mechanical key.
For detailed information refer to “Key
To unfold the key, press the release
Ignition Switch” in chapter 6.
button then the key will unfold
automatically.
NOTICE
To fold the key, fold the key manually
while pressing the release button.
To prevent damaging the remote key:
• Keep the remote key away from
NOTICE
water or any liquid and fire. If
the inside of the remote key gets
Do not fold the key without pressing the
damp (due to drinks or moisture),
release button. This may damage the
or is heated, internal circuit may
key.
malfunction, excluding the car from
the warranty.
Remote key precautions
• Avoid dropping or throwing the
The remote key will not work if any of the
remote key.
following occur:
• Protect the remote key from extreme
• The key is in the ignition switch.
temperatures.
• You exceed the operating distance
limit (about 10 m [30 feet]).
• The remote key battery is weak.
• Other vehicles or objects may be
blocking the signal.
• The weather is extremely cold.
• The remote key is close to a radio
transmitter such as a radio station or
an airport which can interfere with
normal operation of the remote key.
5-5
Convenient features
When the remote key does not work
Battery replacement
correctly, open and close the door
with the mechanical key. If you have
a problem with the remote key, it is
recommended that you contact an
authorized HYUNDAI dealer.
If the remote key is in close proximity to
your mobile phone, the signal could be
blocked by your mobile phone’s normal
operational signals.
This is especially important when the
phone is active such as making and
receiving calls, text messaging, and/ or
OOSH059003L
sending/receiving emails.
Battery Type: CR2032
Avoid placing the remote key and your
1. Insert a slim tool into the slot and
mobile phone in the same location and
gently pry open the cover.
always try to maintain an adequate
2. Remove the old battery and insert the
distance between the two devices.
new battery. Make sure the battery
position is correct.
Information
3. Reinstall the rear cover of the remote
This device complies with Industry
key.
Canada RSS-210 standard.
If you suspect your remote key might
Operation is subject to the following three
have sustained some damage, or you feel
conditions:
your remote key is not working correctly,
it is recommended that you contact an
1. This device may not cause harmful
authorized HYUNDAI dealer.
interference.
2. This device must accept any
interference received, including
Information
interference that may cause undesired
An inappropriately disposed
operation.
battery can be harmful to
3. Changes or modifications not expressly
the environment and human
approved by the party responsible
health. Dispose of the battery
for compliance could void the user’s
according to your local law(s)
authority to operate the device.
and regulation.
NOTICE
IC WARNING
Keep the remote key away from
This device complies with Industry
electromagnetic materials that block
Canada licence-exempt RSS
electromagnetic waves to the key
standard(s).
surface.
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
5-6
05
Smart key (if equipped)
Locking your vehicle
OOS050026N
OOS047001
Your HYUNDAI uses a smart key, which
To lock your vehicle using the door
you can use to lock or unlock a door (and
handle button or the Smart Key:
tailgate) and even start the engine even
1. Close all doors, hood and liftgate.
just carrying the key.
2. Either press the door handle button or
1. Door lock
press the Door Lock button (1) on the
2. Door unlock
smart key.
3. Remote start (if equipped)
3. The hazard warning lights will blink
and the chime will sound once.
4. Panic
4. When the doors are locked, the
indicator light on the central door
lock/unlock switch will be illuminated.
Information
The door handle button will only operate
when the smart key is within 28~40 inches
(0.7~1 m) from the outside door handle.
5-7
Convenient features
Even though you press the outside
Unlocking your vehicle
door handle button, the doors will not
Button type
lock and the chime will sound for three
seconds if any of the following occur:
• The Smart Key is in the vehicle.
• The Engine Start/Stop button is in
ACC or ON position.
• Any door except the liftgate is open.
CAUTION
When you leave your vehicle with
OOS047001
the smart key, make sure to press the
button on the front door handle to lock
To unlock your vehicle:
the doors after close all of the doors,
1. Make sure you have the smart key in
the hood and the liftgate. If you do not
your possession.
press the button, the doors might not
2. Press either the button on the door
be locked so please use caution.
handle or the Door Unock button (2)
on the smart key. The driver’s door
will unlock and the hazard warning
WARNING
lights will blink two times.
Do not leave the Smart Key in your
3. Two Press Unlock Feature
vehicle with unsupervised children.
Unattended children could press the
The priority for unlocking the driver door
Engine Start/ Stop button and may
only, or unlocking all the doors with
operate power windows or other
one press may be adjusted in the User
controls, or even make the vehicle
Settings menu in the LCD cluster display.
move, which could result in serious
The Two Press Unlock feature, when
injury or death.
enabled, will require the user to press
the door unlock button once for driver
door only and twice for unlocking all the
doors.
Select or Deselect the Two Press Unlock
Feature in the User Settings menu in the
LCD cluster display. The option can be
found under the following menu:
USER SETTINGS → DOOR → TWO PRESS
UNLOCK
5-8
05
The Two Press Unlock Feature can also
Remotely starting vehicle
be enabled or disabled by pressing
You can start the vehicle using the
the door lock and unlock buttons
Remote Start button on the smart key.
simultaneously on the Key FOB:
To start the vehicle remotely:
Press and hold both the DOOR LOCK
1. Press the door lock button on the
button and the DOOR UNLOCK button
smart key within 10 m (32 feet) from
simultaneously until the hazard warning
the vehicle.
lights blink.
2. Press the Remote Start button for
This will enable or disable the Two Press
Unlock feature. Repeat this procedure to
more than 2 seconds within 4 seconds
after pressing the door lock button.
enable/disable the mode again.
3. The hazard warning lights will blink
and the engine will start.
Information
4. To turn off the remote start function,
• The door handle buttons will only
press the Remote Start button once.
operate when the smart key is within
28-40 inches (0.7~1m) from the outside
door handle
Information
• Either the driver or front passenger
• The vehicle must be in P (Park) for the
door can be opened with the door
remote start function to start.
handle button when the smart key is
• The engine turns off if you get on the
within this range
vehicle without a registered smart key.
• If you press the front passenger outside
• The engine turns off if you do not get
door handle with the smart key in your
on the vehicle within 10 minutes after
possession, all the doors will unlock
remotely starting the vehicle.
• The Remote Start button may not
operate if the smart key is not within
10 m (32 feet).
• The vehicle will not remotely start if the
engine hood or tailgate is opened.
• Do not idle the engine for a long period.
5-9
Convenient features
Panic button
Mechanical key
Press and hold the Panic button (4) for
If the Smart Key does not operate
more than one second. The horn sounds
normally, you can lock or unlock the
and hazard warning lights blink for about
driver’s door by using the mechanical
30 seconds. To cancel the panic mode,
key.
press any button on the Smart Key.
To remove the mechanical key from the
smart key FOB:
Start-up
You can start the vehicle without
inserting the key.
For more details, refer to the “Engine
Start/Stop Button” section in chapter 6.
Information
If the smart key is not moved for some
time, the detection function for smart key
operation will pause. Lift the smart key to
activate the detection again.
OPD046045
To remove the mechanical key from the
NOTICE
smart key FOB, slide the release lever in
the direction of the arrow (1) and then
To prevent damaging the smart key:
pull the mechanical key (2) outward.
• Keep the smart key in a cool,
To unlock the vehicle using the
dry place to avoid damage or
mechanical key. insert the mechanical
malfunction. Exposure to moisture
key into the key hole in the driver door.
or high temperature may cause
To reinstall the mechanical key into the
the internal circuit of the smart key
FOB, insert the key in the top of the key
to malfunction which may not be
FOB and push inward until a click sound
covered under warranty.
is heard.
• Avoid dropping or throwing the
smart key.
• Protect the smart key from extreme
temperatures.
5-10
05
Loss of a smart key
Information
A maximum of two smart keys can
This device complies with Industry
be registered to a single vehicle. If
Canada RSS-210 standard.
you happen to lose your smart key,
it is recommended that you should
Operation is subject to the following three
conditions:
immediately take the vehicle and
remaining key to your authorized
1. This device may not cause harmful
HYUNDAI dealer or tow the vehicle, if
interference.
necessary.
2. This device must accept any
interference received, including
Smart key precautions
interference that may cause undesired
The smart key may not work if any of the
operation.
following occur:
3. Changes or modifications not expressly
• The smart key is close to a radio
approved by the party responsible
transmitter such as a radio station or
for compliance could void the user’s
an airport which can interfere with
authority to operate the device.
normal operation of the transmitter.
• The smart key is near a mobile two
NOTICE
way radio system or a mobile phone.
• Keep the smart key away from
• Another vehicle’s smart key is being
electromagnetic materials that
operated close to your vehicle.
blocks electromagnetic waves to the
If the smart key does not work correctly,
key surface.
open and close the door with the
• Always have the smart key with
mechanical key. If you have a problem
you when leaving the vehicle. If the
with the smart key, it is recommended to
smart key is left near the vehicle, the
contact an authorized HYUNDAI dealer.
vehicle battery may be discharged.
If the smart key is in close proximity to
your mobile phone, the signal could be
blocked by your mobile phone’s normal
operational signals. This is specifically
relevant when the phone is active such
as making and receiving calls, text
messaging, and/or sending/receiving
emails. When possible, avoid keeping the
smart key and your mobile phone in the
same location such as a pants or jacket
pocket in order to avoid interference
between the two devices.
5-11
Convenient features
Battery replacement
Information
If the Smart Key is not working properly,
An inappropriately disposed
try replacing the battery with a new one.
battery can be harmful to
Battery Type: CR2032
the environment and human
To replace the battery:
health. Dispose of the battery
according to your local law(s) or
regulations.
IC WARNING
This device complies with Industry
Canada licence-exempt RSS
standard(s).
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
OPD046045
must accept any interference, including
interference that may cause undesired
If the Smart Key is not working properly,
operation of the device.
try replacing the battery with a new one.
Remove the smart key cover by turning
the screwdriver clockwise by inserting
the screwdriver (-) into the hole.
Battery Type: CR2032
To replace the battery:
1. Remove the mechanical key.
2. Use a slim tool to pry open the rear
cover of the smart key.
3. Remove the old battery and insert the
new battery. Make sure the battery
position is correct.
4. Reinstall the rear cover of the smart
key.
If you suspect your smart key might have
sustained some damage, or you feel
your smart key is not working correctly,
it is recommended that you contact an
authorized HYUNDAI dealer.
5-12
05
Immobilizer system (if equipped)
WARNING
The immobilizer system helps protect
In order to prevent theft of your
your vehicle from theft. If an improperly
vehicle, do not leave spare keys
coded key (or other device) is used, the
anywhere in your vehicle. Your
engine’s fuel system is disabled.
immobilizer password is a customer
When the ignition switch is placed in
unique password and should be kept
the ON position, the immobilizer system
confidential.
indicator should come on briefly, then
go off. If the indicator starts to blink, the
NOTICE
system does not recognize the coding of
the key.
The transponder in your key is an
important part of the immobilizer
Place the ignition switch to the LOCK/
system. It is designed to give years
OFF position, then place the ignition
of trouble-free service, however you
switch to the ON position again.
should avoid exposure to moisture,
The system may not recognize your
static electricity and rough handling.
key’s coding if another immobilizer key
Immobilizer system malfunction could
or other metal object (i.e., key chain) is
occur.
near the key. The engine may not start
because the metal may interrupt the
transponder signal from transmitting
Information
normally.
This device complies with Industry
If the system repeatedly does not
Canada RSS-210 standard.
recognize the coding of the key, it is
Operation is subject to the following three
recommended that you contact your
conditions:
HYUNDAI dealer.
1. This device may not cause harmful
interference.
Do not attempt to alter this system
or add other devices to it. Electrical
2. This device must accept any
problems could result that may make
interference received, including
your vehicle inoperable.
interference that may cause undesired
operation.
3. Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the device.
5-13
Convenient features
“Limp Home” Mode and Related
1. To activate the password, turn
Procedures
the ignition key “ON” and “OFF“
according to the digit numbers. The
If the immobilizer warning indicator
immobilizer indicator will blink along
blinks for five seconds when the ignition
with the operation of the ignition
key is turned to the “ON” position,
key. For example, turn the ignition
this indicates the immobilizer system
key once for digit number “1”, and
requires service. The engine cannot be
twice for “2”, and so on. For the digit
started without using the procedure
number “0”, you must cycle the
below.
ignition key 10 times.
The following procedure describes how
2. Wait for 3~10 seconds.
to start the engine using the limp home
function (0, 1, 2, 3 as a sample password).
3. You may set the remaining number of
digits by following steps 1 and 2.
4. If all of the four password digits have
NOTICE
been successfully entered, turn the
You can get a limp home password
ignition key “ON” and check that the
when the vehicle is first delivered to
immobilizer indicator illuminates.
you. If you do not have a password,
From this time, you have to start your
consult your authorized HYUNDAI
engine within 30 seconds. If you try
dealer.
to start your engine after 30 seconds,
your engine will not start.
NOTICE
If the engine stalls while driving in the
“limp home” mode, you can start your
engine within 3 seconds without re-
entering the password.
If the immobilizer indicator blinks for five
seconds, you must re-enter the password
(steps 1~4).
After performing the limp home
activation procedure, consult with your
authorized HYUNDAI dealer as soon as
possible.
CAUTION
• If the password is entered incorrectly
three consecutive times, wait for
about one hour to perform the limp
home activation procedure again.
• If you cannot start your engine using
the limp home activation procedure,
have your vehicle towed by an
authorized HYUNDAI dealer.
5-14
05
Door locks
Operating door locks from
Remote key
outside the vehicle
Mechanical key
Remote key
Smart key
OOS050037N
To lock the doors, press the Door Lock
button (1) on the remote key.
To unlock the doors, press the Door
OOS047002
Unlock button (2) on the remote key.
[A] : Lock, [B] : Unlock
Once the doors are unlocked, they may
If you lock the driver’s door with a
be opened by pulling the door handle.
mechanical key, all vehicle doors will
When closing the door, push the door by
lock. If you unlock the driver’s door with
hand. Make sure that doors are closed
a mechanical key, you can open and
securely.
close the driver’s door only.
Once the doors are unlocked, they may
be opened by pulling the door handle.
When closing the door, push the door by
hand. Make sure that doors are closed
securely.
5-15
Convenient features
Smart key
Operating door locks from inside
the vehicle
With the door lock button
OOS047001
To lock the doors, press the button on
the outside door handle while carrying
OOS047003
the smart key with you or press the door
• To unlock a door, push the door lock
lock button on the smart key.
button (1) to the “Unlock” position.
To unlock the doors, press the button on
The red mark (2) on the door lock
the outside door handle while carrying
button will be visible.
the smart key with you or press the door
• To lock a door, push the door lock
unlock button on the smart key.
button (1) to the “Lock” position. If the
Once the doors are unlocked, they may
door is locked properly, the red mark
be opened by pulling the door handle.
(2) on the door lock button will not be
When closing the door, push the door by
visible.
hand. Make sure that doors are closed
• To open a door, pull the door handle
securely.
(3) outward.
• Front doors cannot be locked if the
key is in the ignition switch and any
Information
front door is open.
• In cold and wet climates, door lock
• Doors cannot be locked if the smart
and door mechanisms may not work
key is in the vehicle and any door is
properly due to freezing conditions.
open.
• If the door is locked/unlocked multiple
times in rapid succession with either
the vehicle key or door lock switch, the
Information
system may stop operating temporarily
If a power door lock ever fails to function
in order to protect the circuit and
while you are in the vehicle try one or
prevent damage to system components.
more of the following techniques to exit:
Operate the door unlock feature
repeatedly (both electronic and manual)
while simultaneously pulling on the door
handle.
Operate the other door locks and handles.
Lower a front window and use the
mechanical key to unlock the door from
outside.
5-16
05
With the central door lock/unlock
WARNING
switch
Do not leave children or animals
unattended in your vehicle. An enclosed
vehicle can become extremely hot,
causing death or serious injury to
unattended children or animals who
cannot escape the vehicle. Children
might operate features of the vehicle
that could injure them, or they could
encounter other harm, possibly from
someone gaining entry to the vehicle.
OOS047004
WARNING
When pressing the (
) portion (1) on the
Always secure your vehicle.
switch, all vehicle doors will lock.
Leaving your vehicle unlocked increases
• If any door is opened, the doors will
the potential risk to you or others from
not lock even though the lock button
someone hiding in your vehicle.
(1) of the central door lock switch is
To secure your vehicle, while
pressed.
depressing the brake, shift the gear
• If the smart key is in the vehicle and
to the P (Park) position, engage the
any door is opened, the doors will
parking brake, and press the Engine
not lock even though the lock button
Start/Stop button to the OFF position,
(1) of the central door lock switch is
close all windows, lock all doors, and
pressed.
always take the key with you.
When pressing the (
) portion (2) on the
switch, all vehicle doors will unlock.
CAUTION
Opening a door when something is
WARNING
approaching may cause damage or
injury. Be careful when opening doors
• The doors should always be fully
closed and locked while the
and watch for vehicles, motorcycles,
bicycles or pedestrians approaching the
vehicle is in motion. If the doors
are unlocked, the risk of being
vehicle in the path of the door.
thrown from the vehicle in a crash is
increased.
WARNING
• Do not pull the inner door handle of
If you stay in the vehicle for a long time
the driver’s or passenger’s door while
while the weather is very hot or cold,
the vehicle is moving.
there are risks of injuries or danger to
life. Do not lock the vehicle from the
outside when someone is in the vehicle.
5-17
Convenient features
Auto door lock/unlock features
Child-protector rear door locks
Your vehicle is equipped with features
(if equipped)
that will automatically lock or unlock
your vehicle based on settings you select
in the infotainment system screen.
Auto LOCK Enable on speed
When this feature is set in the
infotainment system screen, all the doors
will be locked automatically when the
vehicle exceeds 15 km/h (9 mph).
Auto LOCK Enable on shift
When this feature is set in the
infotainment system screen, all the doors
OOS047005N
will be locked automatically when the
The child safety lock is provided to help
vehicle is shifted out of P (Park) while the
prevent children seated in the rear from
engine is running.
accidentally opening the rear doors. The
rear door safety locks should be used
Auto UNLOCK On Shift to P
whenever children are in the vehicle.
When this feature is set in the
The child safety lock is located on the
infotainment system screen, all the doors
edge of each rear door. When the child
will be unlocked automatically when the
safety lock is in the lock position, the
vehicle is shifted back into P (Park) while
rear door will not open if the inner door
the engine is running.
handle is pulled.
To lock the child safety lock, insert a
Auto UNLOCK Vehicle off
small flat blade tool (like a screwdriver or
When this feature is set in the
similar) (1) into the slot and turn it to the
infotainment system screen, all the doors
lock position as shown.
will be unlocked automatically when the
To allow a rear door to be opened from
vehicle is turned off.
inside the vehicle, unlock the child safety
lock.
See additional information in supplied
Infotainment Manual.
WARNING
Additional unlock safety feature air
If children accidently open the rear
bag deployment
doors while the vehicle is in motion,
As an additional safety feature, all doors
they could fall out of the vehicle. The
will be automatically unlocked when an
rear door safety locks should always
impact causes the air bags to deploy.
be used whenever children are in the
vehicle.
5-18
05
Rear Occupant Alert (ROA)
WARNING
This function prevents the driver from
The rear seat passenger alarm system
leaving a passenger in the rear seats.
provides information to the driver to
If your vehicle is equipped with
check the rear seats but it does not
additional navigation, please refer
detect whether there is an object or
to the infotainment system manual
passenger in the back seats. Please
separately supplied.
check the rear seats always when
leaving the vehicle.
CAUTION
The door open and close history is
initialized if the driver turns off the
engine and lock the vehicle door. Even
though the rear door is not opened
again, the alarm may sound if there is
the previous record. For example, if the
driver does not lock the vehicle door
and opens the door to get off after the
OCN7050135L
alarm sounds, the alarm may go off.
NOTICE
When the driver turns off the engine
and opens the driver’s door after
opening and closing a rear door, a
warning message “Check rear seats”
appears.
5-19
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст