Chrysler PT Cruiser. Manual — part 935
(4) To disengage latching devise, rock latching
devise rearward and install a rod into the hole to
support latching devise in the open position (Fig.
202).
(5) With both latches in the open position the seat
may be removed (Fig. 203).
(6) Remove latches, if necessary. Remove attaching
bolts and remove latch (Fig. 204).
INSTALLATION
INSTALLATION
(1) Place rear seat back into position in vehicle
(Fig. 199).
(2) Push seat downward to engage hooks.
INSTALLATION — PT-27 ONLY
(1) Install latches, if necessary. Place latch(s) into
position and install attaching bolts. Tighten bolts to
12.5 N·m (110 in. lbs.) (Fig. 205).
(2) Ensure latches are in the open position. With a
rod into the hole to support latching devise in the
open position (Fig. 206).
Fig. 202 PT-27 SEAT LATCH
1 - ROD
Fig. 203 REAR SEAT LATCHES
1 - LATCH(S)
Fig. 204 PIVOT BRACKET(S)
1 - REAR FLOOR PAN
2 - REAR SEAT LATCH(S)
3 - ATTACHING BOLTS
23 - 198
SEATS
PT
REAR SEAT (Continued)
(3) Insert rear seat(s) into position and remove
rods (Fig. 207).
(4) Install latch covers. (Refer to 23 - BODY/
SEATS/REAR SEAT LATCH COVERS - INSTALLA-
TION).
(5) With rear seat(s) in the upright position install
screws attaching check strap(s) (Fig. 208).
Fig. 205 PIVOT BRACKET(S)
1 - REAR FLOOR PAN
2 - REAR SEAT LATCH(S)
3 - ATTACHING BOLTS
Fig. 206 PT-27 SEAT LATCH
1 - ROD
Fig. 207 REAR SEAT LATCHES
1 - LATCH(S)
Fig. 208 CHECK STRAP
1 - CHECK STRAP
2 - ATTACHING SCREW
PT
SEATS
23 - 199
REAR SEAT (Continued)
(6) Place rear seat back into position (Fig. 209).
REAR SEAT BACK
REMOVAL
REMOVAL
(1) Remove seat from vehicle.
(2) Remove seat cushion side shields.
(3) Remove bolts attaching recliner to seat back
cushion frame.
(4) Remove inboard pivot bolt.
(5) Remove seat back from seat cushion.
REMOVAL - PT-27 ONLY
(1) Remove seat from vehicle. (Refer to 23 - BODY/
SEATS/REAR SEAT - REMOVAL).
(2) Remove rubber bumper (Fig. 210).
(3) Remove seat cushion side shields (Fig. 211) and
(Fig. 212).
Fig. 209 REAR SEAT
1 - REAR SEAT
Fig. 210 REMOVE RUBBER BUMPER
Fig. 211 REAR SEAT SHIELD
ATTACHING SCREWS
23 - 200
SEATS
PT
REAR SEAT (Continued)
(4) Remove inboard pivot bolt (Fig. 213).
(5) Remove seat back from seat cushion.
INSTALLATION
INSTALLATION
(1) Position seat back on cushion.
(2) Install inboard pivot bolt. Tighten bolt to 40
N·m (30 ft. lbs.) torque.
(3) Install bolts attaching recliner to seat cushion
frame. Tighten bolts to 12 N·m (9 ft. lbs.) torque.
(4) Install rear seat cushion side shields.
(5) Install seat in vehicle.
INSTALLATION - PT-27 ONLY
(1) Place seat back into position on the seat cush-
ion.
(2) Install inboard pivot bolt (Fig. 214).
(3) Remove seat cushion side shields (Fig. 215) and
(Fig. 216).
Fig. 212 REAR SEAT CUSHION SHIELD 2
1 - ATTACHING SCREWS
Fig. 213 HINGE BRACKET
1 - ATTACHING BOLT
Fig. 214 HINGE BRACKET
1 - ATTACHING BOLT
Fig. 215 REAR SEAT SHIELD
ATTACHING SCREWS
PT
SEATS
23 - 201
REAR SEAT BACK (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст