Chrysler PT Cruiser. Manual — part 891
Fig. 32 FOLDING TOP FRAMEWORK
1 - F-BOW (FLOATING BOW)
2 - E-BOW (EDGE BOW)
3 - D-BOW
4 - C-BOW
5 - B-BOW
6 - A-BOW header)
7 - FRONT RAIL
8 - TEEPEE LINKS
9 - B-BOW LINK
10 - CENTER RAIL
11 - C-POST STAMPING
12 - C-POST LINK
13 - MAIN PIVOT BRACKET
14 - TENSION STRAP ASSEMBLY
Fig. 30 CANOPY FOLDED BACK
Fig. 31 D-BOW
1 - C-BOW
2 - D-BOW
23 - 22
CONVERTIBLE TOP
PT
FOLDING TOP COVER ASSEMBLY (Continued)
(11) Remove the headliner extrusion profile from
the backlite frame (Fig. 33).
(12) Remove five screws from the edge bow strip
(Fig. 34).
(13) The headliner is now loose. Store it in a clean
place.
(14) Detach the hook and loop strips from the
framework (Fig. 35).
(15) Detach the rear window defogger wire connec-
tors from the rear window defogger pigtails (1 per
side) and pull them through the wire slings.
(16) Open the C-Post seal and drill the four rivets
out.
(17) The C-Post seal gets loose together with the
seal retainer and the canopy cover itself.
INSTALLATION
(1) Place top cover into position (Fig. 36).
(2) Position C-Post seal with the seal retainer and
the canopy cover itself (Fig. 37).
(3) Open the C-Post seal and install the 4 rivets
(using new rivets).
(4) Feed the rear window defogger wire connectors
from the rear window defogger pigtails (1 per side)
and pull them through the wire slings into position.
(5) Attach the hook and loop strips to the frame-
work (Fig. 38).
(6) Set headliner into position to be installed at
the same time as the top cover.
(7) Install five screws from the edge bow strip (Fig.
39).
(8) Install the headliner extrusion profile to the
backlite frame (Fig. 40).
(9) Install screws to the floating bow attaching the
headliner.
Fig. 33 WATER TROUGH
1 - WATER TROUGH
Fig. 34 E-BOW
1 - C-BOW
2 - D-BOW
3 - E-BOW (EDGE BOW)
Fig. 35 HOOK AND LOOP STRIP
1 - HOOK AND LOOP STRIP
PT
CONVERTIBLE TOP
23 - 23
FOLDING TOP COVER ASSEMBLY (Continued)
Fig. 36 FOLDING TOP FRAMEWORK
1 - F-BOW (FLOATING BOW)
2 - E-BOW (EDGE BOW)
3 - D-BOW
4 - C-BOW
5 - B-BOW
6 - A-BOW header)
7 - FRONT RAIL
8 - TEEPEE LINKS
9 - B-BOW LINK
10 - CENTER RAIL
11 - C-POST STAMPING
12 - C-POST LINK
13 - MAIN PIVOT BRACKET
14 - TENSION STRAP ASSEMBLY
Fig. 37 SEALS
1 - CONTOUR BOW 2 SEAL
2 - C-POST LINKAGE SEAL
Fig. 38 HOOK AND LOOP STRAP
1 - HOOK AND LOOP STRIP
23 - 24
CONVERTIBLE TOP
PT
FOLDING TOP COVER ASSEMBLY (Continued)
(10) Install C-Post flaps to the C-Post stamping
(two expanding two rivets per side).
(11) Install
the
headliner
attachments
(elastic
straps) to the folding top frame.
(12) Install five screws to each bow strip (Fig. 41).
(13) Install nine screws attaching headliner to the
front header.
(14) Position the canopy to the B-Bow (Fig. 42)
and (Fig. 43).
Fig. 39 E-BOW
1 - C-BOW
2 - D-BOW
3 - E-BOW (EDGE BOW)
Fig. 40 WATER TROUGH
1 - WATER TROUGH
Fig. 41 D-BOW
1 - C-BOW
2 - D-BOW
Fig. 42 CANOPY AT B-BOW
PT
CONVERTIBLE TOP
23 - 25
FOLDING TOP COVER ASSEMBLY (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст